DCA010
No.1892-1/3
Very High-Speed Switching Diode
Silicon Epitaxial Planar Type (Anode Common)
Features
•Ideally suited for use in hybrid ICs because
of very small-sized package.
•Fast switching speed.
•Small interterminal capacitance.
Electrical Connection
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Peak Reverse Voltage VRM 85 V
Reverse Voltage VR80 V
Peak Forward Current IFM Unit rating 300 mA
Total rating 450 mA
Average Rectified Current IOUnit rating 100 mA
Total rating 150 mA
Surge Current (1µs) IFSM Unit rating 4 A
Total rating 6 A
Allowable Power Dissipation P 200 mW
Junction Temperature Tj 125 °C
Storage Temperature Tstg --55 to +125 °C
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : EN1892B
DCA010
Package Dimensions
unit : mm
1117B
[DCA010]
12000 GI IM / 2019MO, TS
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
0.4
0.95 0.95
1.9
2.9
0.5
1.5
2.5
0.5
0.16
0 to 0.1
0.8
1.1
2
3
1
1 : Cathode
2 : Cathode
3 : Anode
SANYO : CP
(Top view)
3
21
Anode
Cathode Cathode
DCA010
No.1892-2/3
Rev erse Voltage, VR -- V
IR -- VR
Reverse Current, IR -- µA
Forward Voltage, VF -- V
IF -- VF
Forward Current, IF -- mA
IT02033 IT02034
Rev erse Voltage, VR -- V
C -- VR
Interterminal Capacitance, C -- pF
Reverse Recovery Time, trr -- ns
Forward Current, IF -- mA
trr -- IF
IT02035 IT02036
10
3
5
5
2
7
7
1.0
2
3
5
7
100
2
5
10--2
10--1
2
5
1.0
10
2
5
2
5
102
2
5
103
0 0.2 0.4 0.6 0.8 1.0 1.2
0.1 352 1.0 352 10 100
352
Ta=100°C
25°C
--25°C
2
5
10--3
10--2
2
5
10--1
2
5
2
5
10
1.0
0 20406080100
Ta=100°C
75°C
50°C
25°C
0.5
0
1.0
1.5
2.0
2.5
3.0
1.0 23 5
0.1 23 5 10 100
23 5 2
f=1MHz
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions min typ max Unit
Forward Voltage VF1 IF=1mA 0.61 V
VF2 IF=10mA 0.74 V
VF3 IF=100mA 1.20 V
Reverse Current IR1 VR=30V 0.1 µA
IR2 VR=80V 0.5 µA
Interterminal Capacitance C VR=0, f=1MHz 4.0 pF
Reverse Recovery Time trr IF=10mA, VR=6V, RL=50Ω, Irr=0.1Irp 4.0 ns
Marking : W5
Reverse Recovery Time Test Circuit
DUT
50Ω
0.01µF
2kΩ50Ω
50ns
--6V
0IF=10mA 0.1Irp
trr
Irp
DCA010
No.1892-3/3
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of Feburuary, 1999. Specifications and information herein are subject
to change without notice.
PS
