B39311B3712U410 - EPCOS - Product.Network

EPCOS AG 2011. Reproduction, publication and dissemination of this data sheet, enclosures

hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

SAW Components

SAW RF filter

Short range devices

Series/type:

Ordering code: B3712

B39311B3712U410

Date:

Version: March 11, 2011

2.0

2March 11, 2011

B3712

312.20 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW RF filter

Data sheet

Application

■Low-loss RF filter for remote control application

■No matching network required for operation at 50 Ω

Features

■Package size 3.0 x 3.0 x 1.1 mm3

■Package code DCC6C

■RoHS compatible

■Approximate weight 0.037 g

■Package for Surface Mount Technology

(SMT)

■Ni, gold-plated terminals

■Lead free soldering compatible with J - STD20C

■Passivation layer Elpas

■AEC-Q200 qualified component family

■Electrostatic Sensitive Device (ESD)

Pin configuration

■2 Input

■5 Output

■1,3,4,6 Ground (case)

3March 11, 2011

B3712

312.20 MHz

SAW Components

SAW RF filter

Data sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Characteristics

Temperature range for specification: T = –40 ˚C to+110 ˚C

Terminating source impedance: ZS=50Ω

Terminating load impedance: ZL=50Ω

min. typ.

@ 25 ˚C max.

Center frequency fC— 312.20 — MHz

Maximum insertion attenuation αmax

311.90 ... 312.50 MHz — 1.8 2.91)

1) T = –40˚C to +85˚C : 2.5 dB

Amplitude ripple (p-p)

311.90 ... 312.50 MHz — 0.5 1.72)

2) T = –40˚C to +85˚C : 1.3 dB

Relative attenuation (relative to αmin)αrel

270.00 ... 286.00 MHz 55 60 — dB

290.20 ... 291.10 MHz 53 58 — dB

301.20 ... 301.80 MHz 48 53 — dB

322.60 ... 323.20 MHz 24 31 — dB

333.30 ... 334.20 MHz 36 41 — dB

354.70 ... 355.90 MHz 50 55 — dB

Temperature coefficient of frequency

f— -30 — ppm/K

Maximum ratings

Operable temperature range T –45/+125 ˚C

Storage temperature range Tstg –45/+125 ˚C

DC voltage VDC 6 V

Source power PS10 dBm source impedance 50 Ω

4March 11, 2011

B3712

312.20 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW RF filter

Data sheet

Transfer function

Transfer function (wideband)

5March 11, 2011

B3712

312.20 MHz

SAW Components

SAW RF filter

Data sheet

Please read

cautions and warnings and

important notes

at the end of this document.

References

Type B3712

Ordering code B39311B3712U410

Marking and package C61157-A7-A67

Packaging F61074-V8168-Z000

Date codes L_1126

S-parameters B3712_NB.s2p, B3712_WB.s2p

see file header for port/pin assignment table

Soldering profile S_6001

RoHS compatible defined as compatible with the following documents:

"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT

AND OF THE COUNCIL of 27 January 2003 on the restriction

of the use of certain hazardous substances in electrical and

electronic equipment. 2005/618/EC from April 18th, 2005,

amending Directive 2002/95/EC of the European Parliament

and of the Council for the purposes of establishing the maxi-

mum concentration values for certain hazardous substances in

electrical and electronic equipment."

Moldability Before using in overmolding environment, please contact your

EPCOS sales office.

Matching coils See Inductor pdf-catalog

http://

www

.tdk.co.jp/tefe02/coil.htm#aname1

and Data Library for circuit simulation

http://www.tdk.co.jp/etvcl/index.htm

For further information please contact your local EPCOS sales office or visit our webpage at

ww.epcos.com .

Published by EPCOS AG

Surface Acoustic Wave Components Division

P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2011. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

he international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

he type in question please also contact one of our Sales Offices.

6March 11, 2011

Important notes

he following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately

incumbent on the customer to check and decide whether an EPCOS product with the

properties described in the product speciﬁcation is suitable for use in a particular customer

application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as speciﬁed. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained

by third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-speciﬁc notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales ofﬁces.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

speciﬁcations. Please check therefore to what extent product descriptions and speciﬁcations

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Conse-

quently, we cannot guarantee that all products named in this publication will always be

available. The aforementioned does not apply in the case of individual agreements deviating

from the foregoing for customer-speciﬁc products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current

version of the “General Terms of Delivery for Products and Services in the Electrical

Industry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,

DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,

PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,

SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks

registered or pending in Europe and in other countries. Further information will be found on

the Internet at www.epcos.com/trademarks.