ES1108R9001E-T - ADVANTECH - Product.Network

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 2.7 Page 1 of 5

Set your site on VICOR at vicorpower.com

Product Highlights

The VI-J00 MiniMod family established a new standard in component-level DC-DC converters.

This “junior” size complement to the higher power VI-200 family offers up to 100 W of isolated

and regulated power in a board mounted package. With thousands of input/output/power

combinations, and with a maximum operating temperature rating of 100˚C, the MiniMod

provides nearly unlimited flexibiliy for power system designers to meet demanding time to

market requirements.

Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed

base of over 8 million units, the MiniMod family combines state of the art power density with

the efficiency, low noise and reliability required by next generation power systems.

Features

•RoHS compliant (VE versions)

•Up to 50 Watts per cubic inch

•cULus, cTÜVus

•CE Marked

•Up to 90% efficiency

•Size: 2.28" x 2.4" x 0.5"

(57,9 x 61,0 x 12,7)

•Remote sense and current limit

•Logic disable

•Wide range output adjust

•ZCS power architecture

•Low noise FM control

•Isolated output

Data Sheet

VI-J00, VE-J00

Half Brick

DC-DC Converters

25 to 100 Watts

Low Line

Voltage 75% Transient[a] Vin 2 3.3 5 5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.5 24 28 36 40 48 52 72 85 95

Nom. (Range) Max Power Designators ZY 0XWVTRM1 P 2N3L JK4 HFDB

12 (10-20) n/a22 0XXYYYYYYXXXXXXXXXXXXXX

24 (10-36) n/an/aV--YYYYYYYYYYYYYYYYY--------

24 (21-32) 18 36 1WWWWWWX X WWWWWWWWWWWWWW

24 (18-36) n/an/aWWWWWWWX X WWWWWWWWWWWWWW

36 (21-56) 18 60 2YYYYYYYYXXXXXXXXXXX------

48 (42-60) 36 72 3WWWWWWX X WWWWWWWWWWWWWW

48 (36-76) n/an/aNWW X X X XX X WWWWWWWWWWWWWW

72 (55-100) 45 110 4WWWWWWX X WWWWWWWWWWWWWW

110 (66-160) n/an/aTWW X X X XX X WWWWWWWWWWWW-- --

150 (100-200) 85 215 5WWWWWWX X WWWWWWWWWWWWWW

150 (100-375) n/an/a7YYYYYYYYXXXXXXXXXXX------

300 (200-400) 170 425 6WWWWWWX X WWWWWWWWWWWWWW

VI — J 6 1 — C W

Family Series Input Output Grade Power

VI = Non-RoHS J=J00 0= 12 V N=48V Z=2V M=10V K=40V E= –10 to 100°C ≥ 5 V <5

VE = RoHS V= 24 V 4=72V Y=3.3V 1=12V 4=48V C= –25 to 100°C W= 100 W W= 20 A

1=24V T= 110 V 0=5V P= 13.8 V H=52V I= –40 to 100°C X= 75 W X= 15 A

W=24V 5= 150 V X=5.2V 2=15V F=72V M= –55 to 100°C Y= 50 W Y= 10 A

2=36V 6= 300 V W=5.5V N= 18.5 V D=85V Z= 25 W Z=5 A

3=48V 7= 150/300 V V=5.8V 3=24V B=95V

T=6.5V L=28V

R=7.5V J=36V

Part Numbering

[a]Transient voltage for 1 second.

Vout Designators

Output

Input

Maximum Power Available for VI-Jxx-xx

Note: For additional

packaging options,

please see page 4.

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 2.7 Page 2 of 5

Set your site on VICOR at vicorpower.com

CONVERTER SPECIFICATIONS

(typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified)

VI-J00 E-Grade VI-J00 C-, I-, M-Grade

Parameter Min Typ Max Min Typ Max Units Test Conditions

Inrush charge 60x 10-6 60 x 10-6 100 x 10-6 Coulombs Nominal line

Input reflected 10% 10% IIN Nominal line, full load

ripple current – pp

Input ripple rejection

dB 120 Hz, nominal line

dB 2400 Hz, nominal line

No load power dissipation 1.35 2 1.35 2 Watts

25+20 Log

(

Vin

)

Vout

30+20 Log

(

Vin

)

Vout

20+20 Log

(

Vin

)

Vout

VI-J00 E-Grade VI-J00 C-, I-, M-Grade

Parameter Min Typ Max Min Typ Max Units Test Conditions

Setpoint accuracy 1% 2% 0.5% 1% VNOM

Load/line regulation 0.5% 0.05% 0.2% VNOM LL to HL, 10% to Full Load

1% 0.2% 0.5% VNOM LL to HL, No Load to 10%

Output temperature drift 0.02 0.01 0.02 % / °C Over rated temperature

Long term drift 0.02 0.02 %/1K hours

Output ripple – pp:

2 V, 3.3 V 200 100 150 mV 20 MHz bandwidth

5 V 5% 2% 3% VNOM 20 MHz bandwidth

10 – 95 V 3% 0.75% 1.5% VNOM 20 MHz bandwidth

Tr i m range

[a]

50% 110% 50% 110% VNOM

To t al remote 0.5 0.5 Volts 0.25 V max. neg. leg

sense compensation

Current limit 105% 135% 105% 125% Ifull loadAutomatic restart

Short circuit current 105% 140% 105% 130% Ifull loadAutomatic restart

VI-J00 E-Grade VI-J00 C-, I-, M-Grade

Parameter Min Typ Max Min Typ Max Units Test Conditions

Gate out impedance 50 50 Ohms

Gate in impedance 1000 1000 Ohms

Gate in high threshold 6 6 Volts Use open collector

Gate in low threshold 0.65 0.65 Volts

Gate in low current 6 6 mA

[a]10 V, 12 V, 13.8 V, 15 V outputs, or “V” input range have standard trim range ±10%. Consult factory for wider trim range.

95 V output –50 + 0% trim range.

INPUT SPECIFICATIONS

OUTPUT CHARACTERISTICS

CONTROL PIN SPECIFICATIONS

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 2.7 Page 3 of 5

Set your site on VICOR at vicorpower.com

CONVERTER SPECIFICATIONS

(typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified)

VI-J00 E-Grade VI-J00 C-, I-, M-Grade

Parameter Min Typ Max Min Typ Max Units Test Conditions

Input to output 3,000 3,000 VRMS Baseplate earthed

Output to baseplate 500 500 VRMS

Input to baseplate 1,500 1,500 VRMS

VI-J00 E-Grade VI-J00 C-, I-, M-Grade

Parameter Min Typ Max Min Typ Max Units Test Conditions

Efficiency 78 – 88% 80 – 90%

Baseplate to sink 0.14 0.14 °C/Watt With Vicor P/N 20267

VI-J00 E-, C-Grade VI-J00 I-, M-Grade

Parameter Min Typ Max Min Typ Max Units Test Conditions

Weight 2.9 3.2 3.6 3.4 3.8 4.1 Ounces

82.8 92 101.2 96.3 107 117.7 Grams

DIELECTRIC WITHSTAND CHARACTERISTICS

THERMAL CHARACTERISTICS

MECHANICAL SPECIFICATIONS

Parameter Storage Operating Units Notes

E -20 to +105 -10 to + 100 °C

C -40 to +105 -25 to + 100 °C

I -55 to +105 -40 to + 100 °C

M -65 to +105 -55 to + 100 °C

PRODUCT GRADE TEMPERATURES

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 2.7 Page 4 of 5

Set your site on VICOR at vicorpower.com

MECHANICAL DRAWING

0.080 Dia (2) places 0.080 Dia (2) places

Solder plate Matte tin over copper

over copper alloy alloy

0.040 (1,0) Dia (7) places 0.040 Dia (7) places

Matte tin over copper

Solder plate

over copper alloy alloy

.01

Aluminum Base

Product ID

this surface

Function

+In

-In

+Out

Trim

–Sense

–Out

Pin #

FULL R

+.030 (0,76)

-.000 (0)

(5,6) Min.

(7,6) Min. (44,4) Max.

(61,0)

(57,9)

(3,0)

(12,7)

1.90

.65

(16,5)

.49

(12,4)

.30±.015

(7,6)±(0,38)

.15

2.10

(53,4)

(33,0)

.40

(10,2)

.35± .015

(8,9)±(0,38)

1.40

(35,6)

1.00

(25,4)

.70

(17,8)

Gate In

Gate Out

+Sense

VI-J00

2.28

1.30

(3,8) .15

(3,8)

(48,3)

.22

.12

.50

.30

2.40

1.75

Standard RoHS

Flangeless package Flangeless package

with integral heat sink

To order the SlimMod configuration add the suffix “– S” to

the standard module part number.

Qty (2) grounding clips are included with each SlimMod

P/N 32187

Available with longitudinal or transverse fins of 0.25"(6.35

mm) or 0.50"(12.7 mm) height. Add the appropriate

suffix to the module part number.

Qty (4) grounding clips are included with each FinMod

F1, F2 P/N 32185

F3, F4 P/N 32186

To order the BusMod fully assembled, add suffix “–B1” to

the standard module part number.

To order the BusMod separately:

Half-sized BusMod — P/N 18952

See BusMod Mechanical Drawings for more details.

2.28"L x 1.80"W x 0.50"H

(57,9 x 45,7 x 12,7 mm)

Longitudinal, 0.25"(6.35 mm) fins — add suffix “–F1”

Longitudinal, 0.50"(12.7 mm) fins — add suffix “–F2”

Transverse, 0.25"(6.35 mm) fins — add suffix “–F3”

Transverse, 0.50"(12.7 mm) fins — add suffix “–F4”

PACKAGING OPTIONS

2.28"L x 2.40"W x 1.08"H

(57,9 x 61,0 x 27,4 mm)

1 up – 2.58¨ x 2.5¨ x 0.62¨ (65,5 x 63,5 x 15,7 mm)

2 up – 2.58¨ x 4.9¨ x 0.62¨ (65,5 x 124,5 x 15,7 mm)

3 up – 2.58¨ x 7.3¨ x 0.62¨ (65,5 x 185,4 x 15,7 mm)

MegaMod Jr.

Chassis mount alternatives, one, two,

or three outputs: up to 300 W

BusMod

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 2.7 2/2012

Set your site on VICOR at vicorpower.com

Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and

accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom

power systems.

Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor makes no

representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves the right to make

changes to any products, specifications, and product descriptions at any time without notice. Information published by Vicor has been checked

and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies. Testing and other quality con-

trols are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where mandated by government requirements,

testing of all parameters of each product is not necessarily performed.

Specifications are subject to change without notice.

Vicor’s Standard Terms and Conditions

All sales are subject to Vicor’s Standard Terms and Conditions of Sale, which are available on Vicor’s webpage or upon request.

Product Warranty

In Vicor’s standard terms and conditions of sale, Vicor warrants that its products are free from non-conformity to its Standard Specifications (the

“Express Limited Warranty”). This warranty is extended only to the original Buyer for the period expiring two (2) years after the date of shipment

and is not transferable.

UNLESS OTHERWISE EXPRESSLY STATED IN A WRITTEN SALES AGREEMENT SIGNED BY A DULY AUTHORIZED VICOR SIGNATORY, VICOR DIS-

CLAIMS ALL REPRESENTATIONS, LIABILITIES, AND WARRANTIES OF ANY KIND (WHETHER ARISING BY IMPLICATION OR BY OPERATION OF LAW)

WITH RESPECT TO THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR REPRESENTATIONS AS TO MERCHANTABILITY, FIT-

NESS FOR PARTICULAR PURPOSE, INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT, OR ANY OTHER MAT-

TER.

This warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. Vicor shall not be

liable for collateral or consequential damage. Vicor disclaims any and all liability arising out of the application or use of any product or circuit and

assumes no liability for applications assistance or buyer product design. Buyers are responsible for their products and applications using Vicor prod-

ucts and components. Prior to using or distributing any products that include Vicor components, buyers should provide adequate design, testing

and operating safeguards.

Vicor will repair or replace defective products in accordance with its own best judgment. For service under this warranty, the buyer must contact

Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be

returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the

product was defective within the terms of this warranty.

Life Support Policy

VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS

PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used herein, life support

devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform

when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to

the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause

the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms and Conditions of Sale, the user of Vicor

products and components in life support applications assumes all risks of such use and indemnifies Vicor against all liability and damages.

Intellectual Property Notice

Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the prod-

ucts described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property rights is

granted by this document. Interested parties should contact Vicor's Intellectual Property Department.

Vicor Corporation

25 Frontage Road

Andover, MA, USA 01810

Tel: 800-735-6200

Fax: 978-475-6715

Customer Service: custserv@vicorpower.com

Technical Support: apps@vicorpower.com