SPEC NO: DSAB1013 REV NO: V.5 DATE: MAY/06/2004 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.L.NIE
1.6X0.8mm SMD CHIP LED LAMP
Features
1.6mmX0.8mm SMT LED, 1.1mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE: 2000PCS / REEL .
LEAD AND CADMIUM FREE.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
Description
The Blue source color devices are made with InGaN
on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
KP-1608PBC BLUE
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
SPEC NO: DSAB1013 REV NO: V.5 DATE: MAY/06/2004 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.L.NIE
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type Iv (mcd)
@ 20mA
Viewing
Angle
Min. Typ. 2θ
θθθ1/2
KP-1608PBC BLUE (InGaN) WATER CLEAR 18 45 120°
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Blue 468 nm IF=20mA
λDDominate Wavelength Blue 470 nm IF=20mA
∆λ1/2 Spectral Line Half-width Blue 25 nm IF=20mA
C Capacitance Blue 65 pF VF=0V;f=1MHz
VFForward Voltage Blue 3.65 4.2 V IF=20mA
IRReverse Current Blue 10 uA VR = 5V
Parameter Blue Units
Power dissipation 102 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAB1013 REV NO: V.5 DATE: MAY/06/2004 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.L.NIE
Blue KP-1608PBC
SPEC NO: DSAB1013 REV NO: V.5 DATE: MAY/06/2004 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.L.NIE
KP-1608PBC
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)