Rectifier Module PSBI 33/06 IC25 = 44 A
for Power Factor Correction VCES = 600 V
IFAV25 = 15 A
VRRM = 1200 V
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 2
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Data according to IEC 60747 refer to a single diode
unless otherwise stated
Preliminary Data Sheet
IGBT
Symbol Test Conditions Maximum Ratings
VCES TVJ = 25 °C to 150 °C 600 V
VGES continuous ±20 V
IC25 TC = 25 °C 44 A
IC80 TS = 80 °C 30 A
RBSOA VCE = 600 V, RG = 10 Ω, TVJ = 125 °C ICM = 100 A
clamped inductive load, L = 100 µH VCEK≤VCES
tSC VCE = 600 V, VGE = ±15 V, RG = 10 Ω,10µs
TVJ = 125 °C, non-repetitive
Symbol Test Conditions Characteristic Values
TVJ = 25 °C, unless otherwise specified
VCE(sat) VGE = 15 V, IC = 10 A, TVJ = 25 °C max. 1.8 V
VCE(sat) VGE = 15 V, IC = 10 A, TVJ = 25 °C typ. 1.5 V
VCE(sat) TVJ = 125 °C typ. 1.6 V
VGE(th) VGE = VCE, IC = 1 mA min. 3 V
VGE(th) VGE = VCE, IC = 1 mA max. 5 V
ICES VCE = VCES, VGE = 0 V, TVJ = 25 °C max. 0.04 mA
ICES TVJ = 125 °C typ. 1 mA
IGES VCE = 0 V, VGE = ±20 V max. 100 nA
td(on) typ. 31 ns
trtyp. 50 ns
td(off) typ. 291 ns
tftyp. 70 ns
Eon typ. 0.60 mJ
Eoff typ. 0.31 mJ
Cies VCE = 25 V, f = 1 MHz, VGE = 0 V typ. 1600 pF
QGon VCE = 480 V, IC = 10 A, VGE = 15 V typ. 140 nC
RthJC max. 0.96 K/W
RthJH max. tbd K/W
}
Module
Symbol Test Conditions Maximum Ratings
TVJ -40...+150 °C
TJM 150 °C
Tstg -40...+150 °C
Visol 50/60 Hz t = 1 min 3000 V∼
Iisol ≤ 1 mA t = 1 s 3600 V∼
MdMounting torque (M 4) 1.5-2.0 Nm
Weight typ. 24 g
inductive load, TVJ = 125 °C
VCE = 400 V, IC = 10 A
VGE = ±15 V, RG = 10 Ω
Caution: These Devices are sensitive
to electrostatic discharge. Users should
observe proper ESD handling precautions.
NTC optional
for exact pin configuration see
final development
Fast Single Phase Rectifier
Ultra Fast Boost Chopper
Features
• Package with DCB ceramic base
plate and soldering pins for PCB
mounting
• Isolation voltage over 3000 V∼
• Planar glasspassivated chips
• high level of integration-
only one power semiconductor
module required for the whole
PFC rectifier
• standard PFC control ICs usable
• fast rectifier diodes for enhanced
EMC behaviour
• NPT IGBT with low saturation
voltage, ultra fast switching
capability, high RBSOA and
short circuit ruggedness
• internally series connected
HiPerFRED free wheeling diode
For fast and soft reverse recovery
at high switching frequency
• leads suitable for PC board
soldering
• UL registered, E 148688
Applications
• single phase rectification with
power factor correction (PFC)
• low harmonic content of mains
current
• mains current and voltage in phase
• wide input voltage range, controlled
output voltage
X KE V P S M A
1 3
http://store.iiic.cc/
ECO-PACTM 2
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Package style and outline
under development
Fast Recovery Diode
Symbol Test Conditions Maximum Ratings
VRRM TVJ = 25 °C to 150 °C 600 V
IF25 TC = 25 °C 30 A
IF80 TC = 80 °C 19 A
Symbol Test Conditions Characteristic Values
TVJ = 25 °C, unless otherwise specified
VFIF = 10 A, TVJ = 25 °C max. 3.2 V
TVJ = 25 °C typ. 2.2 V
TVJ = 125 °C max. 2.4 V
IRVR = VRRM,T
VJ = 25 °C max. 0.1 mA
TVJ = 125 °C typ. 0.1 mA
IRM IF = 10 A, diF/dt = -400 A/µs, TVJ = 125 °C tbd A
trr VR = 400 V tbd ns
RthJC max. 1.15 K/W
RthJH with heat transfer paste tbd K/W
Rectifier Diodes
Symbol Test Conditions Maximum Ratings
VRRM 1200 V
IFAV25 TC = 25 °C, sine 180 ° 33 A
IFAV80 TC = 80 °C, sine 180 ° 22 A
IFSM TVJ = 25 °C, T = 10 ms (50Hz) 60 A
Symbol Test Conditions Characteristic Values
TVJ = 25 °C, unless otherwise specified
VFIF = 10 A, TVJ = 25 °C max. 1.8 V
TVJ = 25 °C typ. 1.4 V
TVJ = 125 °C typ. 1.6 V
IRVR = VRRM,T
VJ = 25 °C max. 0.05 mA
TVJ = 125 °C typ. 0.5 mA
trr VR = 100 V, IF = 10 A, -di/dt = 5 A/µs typ. 1 µs
RthJC per diode max. 2.5 K/W
RthJH with heat transfer paste tbd K/W
dsCreeping distance on surface 11.2 mm
dACreeping distance in air 5 mm
aMax. allowable acceleration 50 m/s²
R25 NTC @ 25 °C 5.000 Ω
Module
Symbol Test Conditions Characteristic Values
http://store.iiic.cc/
