The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated height comparison (with E.FL series) E.FL-LP-040 E.FL-LP-066 2.4(2.5Max) 1.9(2.0Max) U.FL-LP(V)-040 3(3.2Max) U.FL-LP-040 U.FL-LP-066 U.FL Features E.FL Space Factor of Mated Connector 1. Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm) 2. Small mounting area The receptacle occupies an area of 7.7mm2. Plug U.FL-LP-040 Cable 3. Light weight 4. Accepts high frequency transmission. U.FL-R-SMT-1 Receptacle To meet the frequency requirements of a wide variety of miniature devices, the connectors offer high frequency performance from DC to 6GHz, with a V.S.W.R. of 1.3 to 1.5 max. Packaged on tape-and-reel the receptacles can be placed with vacuum nozzles of the automatic placement equipment. Cable Plug Dia.1.32 Dia.1.13 U.FL-R-SMT-1 Receptacle 6. Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable 7. Simple connector mating / unmating Plug U.FL-R-SMT-1 Receptacle 8. Verification of the fully mated condition Plug U.FL-LP-062 Cable Dia.1.00 2.4Max Applications Cable Dia.0.81 Use of available extraction tool assures correct disconnection of the plug and receptacle. Tactile click sensation confirms fully mated condition, assuring complete electrical and mechanical connection. U.FL-LP(V)-040 2.0Max Standard ultra-fine coaxial cable of 0.81mm diameter (single braid shielding) is used for the plug termination, assuring secure and stable connections. U.FL-LP-066 2.5Max 5. Automatic board placement Dia.0.81 2.5Max Receptacle: 15.7mg U.FL-R-SMT-1 Receptacle Cellular phones, PHS, mobile phones, wireless communication devices, electronic measuring instruments, GPS, wireless LAN, Bluetooth and any application requiring high frequency transmission using small coaxial connectors. U.FL-LP-088 Cable 2.4Max Plug Dia.1.37 U.FL-R-SMT-1 Receptacle 2009.2w 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued Please Connectors check the products status on the website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. U.FL SeriesUltra Small or Surface Mount soon. Coaxial - 1.9mm or Hirose 2.4mm Mated Height Product Specifications Ratings Nominal characteristic impedance 50 ohms Operating temperature range -40C to +90C Storage temperature range -30C to +70C Frequency range Operating humidity 90%RH max. Storage humidity DC to 6GHz Item 1. Contact resistance Specification Conditions Center : 20 m ohms max. 10 mA max. Outer : 10 m ohms max. 2. Insulation resistance 500 M ohms min. 100 V DC 3. Withstanding voltage No flashover or insulation breakdown. 200 V AC / 1 minute 4. V.S.W.R.* Part No. 5. Durability 90%RH max. Up to 3GHz 3 to 6GHz U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.35 Max U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.3 Max U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly 1.3 Max 1.4 Max U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly 1.3 Max 1.5 Max U.FL-LP-062 dia.1mm Coaxial Cable Assembly 1.3 Max 1.3 Max U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly 1.3 Max 1.4 Max Contact resistance (mating / un-mating, Center : 25 m ohms max. with corresponding plug) Outer : 15 m ohms max. 30 cycles 6. Vibration Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration No electrical discontinuity of 1s min. of 59m/s2, for 5 cycles in the direction of each of the 3 axis. 7. Shock No damage, cracks or parts dislocation. Acceleration of 735 m/s2, 11ms duration, sine half-wave 8. Humidity No damage, cracks or parts dislocation. waveform, 3 cycles in each of 3 axes. (Steady state) Insulation resistance 10 M ohms min.(humidity high) 96 hours at temperature of 40c and humidity of 95%. Insulation resistance 500 M ohms min.(dry) 9. Temperature cycle No damage, cracks or parts dislocation. Temperature: -40C/+5 to +35C/+90C/+5 to +35C Contact resistance: 25 m ohms max. (Center) Time: 15 m ohms max. (Outer) No excessive corrosion 10. Salt spray 30min. / 3min. /30min./ 3min. 5 cycles 5% salt water solution, 48 hours *V.S.W.R. Measurement System The above V.S.W.R. standard values were measured using the measurement connection shown below. Note 1: Cable type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable 100cm cable. Note 2: Board type connectors were mounted to a 50 glass epoxy board and measurements were conducted with SMA conversion adapters attached. Material / Finishes Part Material Finish Remarks Shell Phosphor bronze Silver plated ---------- Male center contact Brass Gold plated ---------- Gold plated ---------- Plug Phosphor bronze PBT Color: Black UL94V-0 Receptacle LCP Color: Beige UL94V-0 Female center contact Insulator 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkSeriesUltra the products status on the Surface Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales Height representative. U.FL Small Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Receptacles Note 1: Receptacles of (01) specification are sold by the bag with 100 pieces per bag. Please order in pack units. Note 2: Receptacles of (10) specification are sold by the reel (which contains 2,500 pieces). Please order in reel units. Note 3: Receptacles of (40) specification are sold by the reel (Which contains 4,000 pieces) Note 4: This area may be covered by insulating material. GND BRecommended PCB Mounting Pattern SIG No conductive traces in this area GND 10.05 GND SIG 10.05 1.050.05 (3.1) 2.6 1.8 3 2.6 0.6 40.05 1.90.05 1.2Max(Note 4) 0.35 1.25 O2 2.20.05 GND U.FL-R-SMT-1 Part No. CL No. Packaging U.FL-R-SMT-1(01) 331-0472-2-01 Bag packaging (100 pieces/bag) U.FL-R-SMT-1(10) 331-0472-2-10 Reel packaging (2,500 pieces/reel) U.FL-R-SMT-1(40) 331-0472-2-40 Reel packaging (4,000 pieces/reel) Weight / EA RoHS 15.7/mg YES Packaging Specifications Embossed Carrier Tape Dimensions Reel Dimensions O1 1 0. + 0 .5 1.750.1 1.8 20.1 40.1 Center contact 14 0.3 5.50.1 O21 O3302 120.3 O13 80.1 Unreeling direction 1.6 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued Please Connectors check the products status on the website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. U.FL SeriesUltra Small or Surface Mount soon. Coaxial - 1.9mm or Hirose 2.4mm Mated Height Cable Assembly (Plug) Part No. 5 1.8 1.5 1.93 1.93 Mated Height 4 3.4 4 1.85 4 U.FL-LP-088 3 3 U.FL-LP-062 2.8 U.FL-LP(V)-040 2.8 U.FL-LP-066 3 U.FL-LP-040 2.5mm Max. 2.5mm Max. 2.0mm Max. 2.4mm Max. 2.4mm Max. (2.4mm Nom.) (2.4mm Nom.) (1.9mm Nom.) (2.3mm Nom.) (2.3mm Nom.) Dia. 0.81mm Dia. 1mm Dia. 1.37mm Coaxial cable Coaxial cable Coaxial cable 34.8 45.5 71.7 Applicable Dia. 0.81mm cable Coaxial cable Weight (mg) 53.7 Dia. 1.13mm and Dia. 1.32mm Coaxial cable 59.1 RoHS YES Cable Guide Description Dia.0.81mm Coaxial Cable Dia.1.13mm Coaxial Cable Dia.1.32mm Coaxial Cable Dia.1mm Coaxial Cable Dia.1.37mm Coaxial Cable Cable Specification Cable Type 04 068 066 062 088 Inner Conductor Dielectric * Outer * Jacket Nominal Diameter Impedance Diameter Conductor 7/0.05 SA Dia.0.40 Single Dia.0.81 (AWG36) PFA Shield TA[SA] PFA 7/0.08 SA Dia.0.68 Single Dia.1.13 (AWG32) FEP Shield TA[SA] FEP 7/0.08 SA Dia.0.66 Double Dia.1.32 (AWG32) FEP Shield TA FEP 7/0.071 SA Dia.0.62 Tape, single Dia.1 (AWG33) FEP Shield TAT FEP 7/0.102 SA Dia.0.88 Single Dia.1.37 (AWG30) FEP Shield TA FEP Nominal attenuation At 3GHz At 6GHz 6.52dB/m 9.52dB/m [6.45dB/m] [9.42dB/m] 3.73dB/m 5.44dB/m [3.43dB/m] [5.13dB/m] 50 ohms 3.8dB/m 5.6dB/m 50 ohms 3.1dB/m 4.4dB/m 50 ohms 2.8dB/m 4.3dB/m 50 ohms 50 ohms (data as provided by cable suppliers, for reference only) * SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkSeriesUltra the products status on the Surface Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales Height representative. U.FL Small Mount Coaxial Connectors - 1.9mm or 2.4mm Mated How to Specify Plug Cable Assembly Single-Ended Cable Assembly Double-Ended Cable Assembly L L Standard Tolerances for (L) Ordering Information U.FL - [] LP - [] - A - (L) 1 2 3 1 Series name U.FL 2 Assembly type LP: Single ended 2LP: Double ended 4 3 Cable type 04 : Dia.0.81mm Coaxial Cable 068 : Dia.1.13mm Coaxial Cable 066 : Dia.1.32mm Coaxial Cable 062 : Dia.1 mm Coaxial Cable 088 : Dia.1.37mm Coaxial Cable 4 Total length(mm) Length(L) Part No. of Plug U.FL-LP-040 U.FL-LP-066 U.FL-LP-066 U.FL-LP(V)-040 U.FL-LP-062 U.FL-LP-088 Part No. of Cable Assembly L Standard Tolerance L=35 to 200mm 04mm L=200 to 500mm 08mm L=500 to 1000mm 12mm L=Longer than 1000mm 1.5% of (L) Note1: Minimum available length (L) is 35mm Note2: Contact nearest HRS representative if different tolerances are required. Note3: Contact Nearest HRS representative if one end requires preparation. Description U.FL-2LP-04N1T-A-(L) Dia. 0.81mm double ended coaxial cable, color: white U.FL-2LP-04N2T-A-(L) Dia. 0.81mm double ended coaxial cable, color: black U.FL-LP-04N1T-A-(L) Dia. 0.81mm single ended coaxial cable, color: white U.FL-LP-04N2T-A-(L) Dia. 0.81mm single ended coaxial cable, color: black U.FL-2LP-068N1T-A-(L) Dia. 1.13mm double ended coaxial cable, color: gray U.FL-2LP-068N2T-A-(L) Dia. 1.13mm double ended coaxial cable, color: black U.FL-LP-068N1T-A-(L) Dia. 1.13mm single ended coaxial cable, color: gray U.FL-LP-068N2T-A-(L) Dia. 1.13mm single ended coaxial cable, color: black U.FL-2LP-066N1-A-(L) Dia. 1.32mm double ended coaxial cable, color: gray U.FL-2LP-066N2-A-(L) Dia. 1.32mm double ended coaxial cable, color: black U.FL-LP-066N1-A-(L) Dia. 1.32mm single ended coaxial cable, color: gray U.FL-LP-066N2-A-(L) Dia. 1.32mm single ended coaxial cable, color: black U.FL-2LP(V)-04N1T-A-(L) Dia. 0.81mm double ended coaxial cable, color: white U.FL-2LP(V)-04N2T-A-(L) Dia. 0.81mm double ended coaxial cable, color: black U.FL-LP(V)-04N1T-A-(L) Dia. 0.81mm single ended coaxial cable, color: white U.FL-LP(V)-04N2T-A-(L) Dia. 0.81mm single ended coaxial cable, color: black U.FL-2LP-062N1D-A-(L) Dia. 1mm double ended coaxial cable, color: gray U.FL-2LP-062N2D-A-(L) Dia. 1mm double ended coaxial cable, color: black U.FL-LP-062N1D-A-(L) Dia. 1mm single ended coaxial cable, color: gray U.FL-LP-062N2D-A-(L) Dia. 1mm single ended coaxial cable, color: black U.FL-2LP-088N1T-A-(L) Dia. 1.37mm double ended coaxial cable, color: gray U.FL-2LP-088N2T-A-(L) Dia. 1.37mm double ended coaxial cable, color: black U.FL-LP-088N1T-A-(L) Dia. 1.37mm single ended coaxial cable, color: gray U.FL-LP-088N2T-A-(L) Dia. 1.37mm single ended coaxial cable, color: black RoHS YES Please contact Hirose Sales Representative for cable length and cable end treatment. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued Please Connectors check the products status on the website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. U.FL SeriesUltra Small or Surface Mount soon. Coaxial - 1.9mm or Hirose 2.4mm Mated Height Conversion Adapters SMA Conversion Adapter (Mating portion: U.FL side jack - SMA side plug) (10.7) Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. SMA Conversion Adapter (Mating portion: U.FL side plug - SMA side jack) 8HEX Part No. CL No. RoHS HRMP-U.FLJ(40) 311-0300-2-40 YES 14.05 (4.05) 5.6 O6.35 6 1/4-36UNS-2A Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. SMA Conversion Adapter (Mating portion: U.FL side plug - SMA side jack) Part No. CL No. RoHS HRMJ-U.FLP(40) 311-0301-5-40 YES (18.6) (4) 6 5.5 1/4-36UNS-2A Note: This connector is used by compressing the mated portion of U.FL side onto the U.FL-R-SMT-1 portion. Receptacle to Inspection Part No. CL No. RoHS HRMJ-U.FLP-ST1(40) 311-0385-5-40 YES 12.9 (7.9) (4.4) 7HEX 5 1 M50.5 This receptacle is used for inspecting the continuity, withstand voltage, and other aspects of the harness product. Part No. CL No. RoHS U.FL-R-1 331-0466-0 YES Plug Extraction Tool (90) This jig is used for extraction from a mating condition. O15 U.FL 2.1 5 50 Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088. Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062. 6 Part No. CL No. U.FL-LP-N-2 331-0494-5 U.FL-LP(V)-N-2 331-0493-2 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkSeriesUltra the products status on the Surface Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales Height representative. U.FL Small Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Usage Precautions 1. Plugs (1) Mating / unmating 1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges and pull off vertically, in the direction of the connector mating axis. 2) To mate the connectors, the mating axes of both connectors must be Extraction Jig aligned and the connectors can be mated. The "click" will confirm fully U.FL Cable mated connection.Do not attempt to insert on an extreme angle. Assembly U.FL-R-SMT-1 After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram below. U.FL-LP Cable Assembly (2) Pull forces on the cable after connectors are mated. 1N max (U.FL-LP(V)-040, U.FL-LP-062) 2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) U.FL-R-SMT-1 3N max (U.FL-LP(V)-040, U.FL-LP-062) 4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) 1N max (U.FL-LP(V)-040, U.FL-LP-062) 2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) (3) Precautions Do NOT forcefully twist or deform wires. 2. Receptacles 250 c max. for 10 seconds [c] (1) Recommended reflow temperature profile 260 240 220 200 180 160 140 120 100 80 Preheat (130 to 180c) 120 seconds max. 230c 220c 50 seconds max. 60 seconds max. q The temperature of the printed circuit board surface temperature at the points of contact with the terminals. w Reflow soldering should be performed at a printed circuit surface temperature of 250C max. e In individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and board size / thickness. Consuly your solder paste and equipment manufacturer for specific recommendations. Time (2) Recommended manual soldering Manual soldering: 350C for 5 seconds (3) Recommended metal mask thickness 0.1 to 0.12 mm (4) Reflow cycles 2 times 3. Operating environment and storage conditions (1) Operating environment The connectors are not designed to operate in the following environments: * Exposed to a excessive amounts of fine particles and dust * Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses. * Environments having large rapid variations in temperature. (2) Storage conditions Receptacle Store in the Hirose Electric packaging. Temperature: -10 to +40c, Humidity: 85% max. Use within 6 months of delivery. Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface. 7