Identification, colors & marks Cross section A 9 B 10560 3 conductor cable Issue E - 6/21/2012 Specification Control Drawing R A 95 B A 90 B Components ID Quantity A B 3 3 Part number 10550-20 FIL-40-0.030 Description Solid Thermorad Filler 0.030 OD Cable Outer Core Description Wrap Shield Wrap Jacket Thickness Inches mm Al.-PET .002"- Al. facing out Round tinned copper 36 awg regular Al.-PET .002"- Al. facing in Thermorad F black 0.004 0.011 0.004 0.022 0.10 0.27 0.10 0.56 Cable OD tolerance Specification Raychem WCD 3301 Weight 38.03 lb/kft OD Inches 0.140 0.148 0.169 0.177 0.221 mm 3.56 3.76 4.29 4.50 5.62 + 0.015 - 0.015 + 0.38 - 0.38 56.70 Kg/Km (c) 2012 Tyco Electronics Corporation. All rights reserved. Page 1 of 2 Tyco Electronics Corporation Raychem Wire and Cable 501 Oakside Avenue Redwood City, CA 94063-3800 1-800-227-8816 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser #5 RWC 8/7/95 R Specification Control Drawing 10560 3 conductor cable Issue E - 6/21/2012 Continued Physical properties Component Sequence Shield Coverage The placing of the components in the cross sectional view of the cable is for reference only and is not a requirement 93% minimum Electrical properties Insulation Resistance 5400 megohms (minimum) for 1000 ft Notes Colors Dimensions Export License Note Identification, Colors & Marks Minimum length Part Number Note Specification Information Trademarks Jacket identification Color code designators shall be in accordance with MIL-STD-681. Dimensions are in inches, and unless otherwise designated, are nominal. The information contained on this drawing may be subject to International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR) controls and may not be disclosed to any foreign person or firm, including foreign persons employed by or associated with your firm, without first complying with all requirements for obtaining an export license if applicable. The following is the key to the descriptions in the left hand view of the cable on Page 1. Line 1: Identifies the component per the components' ID list. Line 2: Color codes. Line 3: Mark on component "-" mark on component jacket. Cable will be supplied in 50 ft. minimum lengths unless otherwise specified. Other codes and suffixes may be added to the Part Number as necessary, to capture any additional requirements imposed by the purchase order This drawing is the property of Tyco Electronics Corporation and may not be used for any purpose other than for that which it is supplied without the express written authority of Tyco Electronics Corporation. Raychem, Thermorad , TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Mark: Per customer spec. Page 2 of 2 Tyco Electronics Corporation Raychem Wire and Cable 501 Oakside Avenue Redwood City, CA 94063-3800 1-800-227-8816 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser #5 RWC 8/7/95