Preliminary THV1021-Rev0.05W THV1021 2ch Buck, Boost and Inverting Controller Features THine's new 2ch Buck/Boost & Inverting controller enables simple & low cost multi-channel power supply system design. Ch-1 is selectable Buck/Boost controller, ch-2 is selectable Inverting / Buck converter. All channels are PWM controllers and are designed to make phase compensation easy for output ceramic capacitors. SS_1,2, DTC_1,2, and SCP pins help to design user defined soft start time, dead time and timer latch delay time. Utilizing those pins and P_GOOD 1,2, the ensured sequence control can be easily set and linked to the external circuit. This IC is suitable for power supply system of TFT LCD bias and for system board with multi-channel power supply. *TSSOP 24Pin package *Input Voltage range : 4.2 to 18.0V *Push Pull output for direct Power Mos driving *Optimized for Ceramic output capacitor *Complete PWM mode controller *Adjustable switching frequency 200kHz to 1MHz by external resister *Timer Latch Protection * System UVLO Function *Adjustable Soft Start time by external capacitor *Adjustable Timer Latch Delay time by external capacitor *Adjustable Dead Time Control by external resistor *Ch1 is Buck/Boost controller *Ch2 is Buck/Inverting controller Applications P re * General use lim * TFT LCD Bias voltage supply * TV/monitor set in a ry General Description Pin Asignment TSSOP 24P 1 SYSUVLO VREF 24 23 2 SCP SS_2 3 RT SS_VREF 22 4 SGND NON_INV_2 21 5 SS_1 INV_2 20 6 INV_1 FB_2 19 7 FB_1 DTC_2 18 8 DTC_1 XP_DET 17 9 VCC OUT_SYS 16 10 SLCT_1 OUT_2 15 11 OUT_1 P_GOOD2 14 12 P_GOOD1 PGND 13 THine Electronics, Inc.