PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER PM7366 FREEDMTM-8 EIGHT CHANNEL FRAME ENGINE AND DATALINK MANAGER PROPRIETARY AND CONFIDENTIAL ISSUE 3: AUGUST 1999 PMC-Sierra, Inc. 105 - 8555 Baxter Place Burnaby, BC Canada V5A 4V7 604 .415.6000 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER REVISION HISTORY Issue No. Issue Date Details of Change Issue 3 August 1999 Updated to include PBGA package option * Addition of new pinout, pin description, and mechanical diagram. Incorporated Documentation Errata from PMC-980452, "PM7366 FREEDM-8 Revision D Device Errata Sheet" Issue 4. Issue 2 May 1998 Updated for Freedm-8 Release to Production Issue 1 Sept. 1997 Document created for Prototype release PMC-Sierra, Inc. 105 - 8555 Baxter Place Burnaby, BC Canada V5A 4V7 604 .415.6000 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CONTENTS 1 FEATURES ........................................................................................................................1 2 APPLICATIONS .................................................................................................................3 3 REFERENCES ..................................................................................................................4 4 APPLICATION EXAMPLES ...............................................................................................5 5 BLOCK DIAGRAM .............................................................................................................6 6 DESCRIPTION ..................................................................................................................7 7 PIN DIAGRAM ...................................................................................................................9 8 PIN DESCRIPTION .........................................................................................................11 9 FUNCTIONAL DESCRIPTION ........................................................................................33 9.1 HIGH-LEVEL DATA LINK CONTROL PROTOCOL.............................................33 9.2 RECEIVE CHANNEL ASSIGNER ......................................................................34 9.3 9.4 9.2.1 LINE INTERFACE..............................................................................34 9.2.2 PRIORITY ENCODER.......................................................................34 9.2.3 CHANNEL ASSIGNER......................................................................35 9.2.4 LOOPBACK CONTROLLER .............................................................35 RECEIVE HDLC PROCESSOR / PARTIAL PACKET BUFFER ..........................35 9.3.1 HDLC PROCESSOR.........................................................................36 9.3.2 PARTIAL PACKET BUFFER PROCESSOR ......................................36 RECEIVE DMA CONTROLLER..........................................................................38 9.4.1 DATA STRUCTURES.........................................................................38 9.4.2 DMA TRANSACTION CONTROLLER ..............................................48 9.4.3 WRITE DATA PIPELINE/MUX ...........................................................48 9.4.4 DESCRIPTOR INFORMATION CACHE............................................48 i PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 9.4.5 9.5 9.6 9.7 9.8 FRAME ENGINE AND DATA LINK MANAGER FREE QUEUE CACHE......................................................................48 PCI CONTROLLER ............................................................................................49 9.5.1 MASTER MACHINE ..........................................................................49 9.5.2 MASTER LOCAL BUS INTERFACE .................................................51 9.5.3 TARGET MACHINE ...........................................................................52 9.5.4 CBI BUS INTERFACE .......................................................................54 9.5.5 ERROR / BUS CONTROL.................................................................54 TRANSMIT DMA CONTROLLER .......................................................................54 9.6.1 DATA STRUCTURES.........................................................................55 9.6.2 TASK PRIORITIES ............................................................................66 9.6.3 DMA TRANSACTION CONTROLLER ..............................................66 9.6.4 READ DATA PIPELINE ......................................................................66 9.6.5 DESCRIPTOR INFORMATION CACHE............................................66 9.6.6 FREE QUEUE CACHE......................................................................66 TRANSMIT HDLC CONTROLLER / PARTIAL PACKET BUFFER......................67 9.7.1 TRANSMIT HDLC PROCESSOR .....................................................67 9.7.2 TRANSMIT PARTIAL PACKET BUFFER PROCESSOR...................67 TRANSMIT CHANNEL ASSIGNER....................................................................69 9.8.1 LINE INTERFACE..............................................................................70 9.8.2 PRIORITY ENCODER.......................................................................70 9.8.3 CHANNEL ASSIGNER......................................................................71 9.9 PERFORMANCE MONITOR ..............................................................................71 9.10 JTAG TEST ACCESS PORT INTERFACE..........................................................71 9.11 PCI HOST INTERFACE......................................................................................71 ii PM7366 FREEDM-8 DATA SHEET PMC-970930 10 ISSUE 3 NORMAL MODE REGISTER DESCRIPTION.................................................................76 10.1 11 13 14 PCI HOST ACCESSIBLE REGISTERS..............................................................76 PCI CONFIGURATION REGISTER DESCRIPTION .....................................................216 11.1 12 FRAME ENGINE AND DATA LINK MANAGER PCI CONFIGURATION REGISTERS ...............................................................216 TEST FEATURES DESCRIPTION ................................................................................226 12.1 TEST MODE REGISTERS ...............................................................................226 12.2 JTAG TEST PORT ............................................................................................227 12.2.1 IDENTIFICATION REGISTER .........................................................228 12.2.2 BOUNDARY SCAN REGISTER ......................................................228 OPERATIONS ................................................................................................................241 13.1 EQUAD CONNECTIONS..................................................................................241 13.2 TOCTL CONNECTIONS...................................................................................241 13.3 JTAG SUPPORT ...............................................................................................242 FUNCTIONAL TIMING...................................................................................................248 14.1 RECEIVE LINK INPUT TIMING ........................................................................248 14.2 TRANSMIT LINK OUTPUT TIMING .................................................................249 14.3 PCI INTERFACE ...............................................................................................250 14.4 BERT INTERFACE............................................................................................258 15 ABSOLUTE MAXIMUM RATINGS .................................................................................260 16 D.C. CHARACTERISTICS..............................................................................................261 17 FREEDM-8 TIMING CHARACTERISTICS ....................................................................263 18 ORDERING AND THERMAL INFORMATION ...............................................................269 19 MECHANICAL INFORMATION......................................................................................270 iii PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER LIST OF REGISTERS REGISTER 0X000 : FREEDM-8 MASTER RESET ......................................................................77 REGISTER 0X004 : FREEDM-8 MASTER INTERRUPT ENABLE ..............................................79 REGISTER 0X008 : FREEDM-8 MASTER INTERRUPT STATUS ...............................................83 REGISTER 0X00C : FREEDM-8 MASTER CLOCK / BERT ACTIVITY MONITOR AND ACCUMULATION TRIGGER............................................................................................87 REGISTER 0X010 : FREEDM-8 MASTER LINK ACTIVITY MONITOR .......................................89 REGISTER 0X014 : FREEDM-8 MASTER LINE LOOPBACK .....................................................91 REGISTER 0X020 : FREEDM-8 MASTER BERT CONTROL ......................................................93 REGISTER 0X024 : FREEDM-8 MASTER PERFORMANCE MONITOR CONTROL .................95 REGISTER 0X040 : GPIC CONTROL ..........................................................................................98 REGISTER 0X100 : RCAS INDIRECT LINK AND TIME-SLOT SELECT ...................................101 REGISTER 0X104 : RCAS INDIRECT CHANNEL DATA............................................................103 REGISTER 0X108 : RCAS FRAMING BIT THRESHOLD ..........................................................105 REGISTER 0X10C : RCAS CHANNEL DISABLE ......................................................................107 REGISTER 0X180 : RCAS LINK #0 CONFIGURATION.............................................................109 REGISTER 0X184 - 0X188 : RCAS LINK #1 TO #2 CONFIGURATION ....................................111 REGISTER 0X18C : RCAS LINK #3 CONFIGURATION ............................................................113 REGISTER 0X190-0X19C : RCAS LINK #4 TO LINK #7 CONFIGURATION.............................115 REGISTER 0X200 : RHDL INDIRECT CHANNEL SELECT ......................................................117 REGISTER 0X204 : RHDL INDIRECT CHANNEL DATA REGISTER #1....................................119 REGISTER 0X208 : RHDL INDIRECT CHANNEL DATA REGISTER #2....................................122 REGISTER 0X210 : RHDL INDIRECT BLOCK SELECT ...........................................................124 REGISTER 0X214 : RHDL INDIRECT BLOCK DATA .................................................................126 iv PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER REGISTER 0X220 : RHDL CONFIGURATION...........................................................................128 REGISTER 0X224 : RHDL MAXIMUM PACKET LENGTH.........................................................130 REGISTER 0X280 : RMAC CONTROL ......................................................................................131 REGISTER 0X284 : RMAC INDIRECT CHANNEL PROVISIONING..........................................134 REGISTER 0X288 : RMAC PACKET DESCRIPTOR TABLE BASE LSW...................................136 REGISTER 0X28C : RMAC PACKET DESCRIPTOR TABLE BASE MSW .................................137 REGISTER 0X290 : RMAC QUEUE BASE LSW........................................................................139 REGISTER 0X294 : RMAC QUEUE BASE MSW.......................................................................140 REGISTER 0X298 : RMAC PACKET DESCRIPTOR REFERENCE LARGE BUFFER FREE QUEUE START ..............................................................................................................142 REGISTER 0X29C : RMAC PACKET DESCRIPTOR REFERENCE LARGE BUFFER FREE QUEUE WRITE..............................................................................................................143 REGISTER 0X2A0 : RMAC PACKET DESCRIPTOR REFERENCE LARGE BUFFER FREE QUEUE READ ...............................................................................................................144 REGISTER 0X2A4 : RMAC PACKET DESCRIPTOR REFERENCE LARGE BUFFER FREE QUEUE END..................................................................................................................145 REGISTER 0X2A8 : RMAC PACKET DESCRIPTOR REFERENCE SMALL BUFFER FREE QUEUE START ..............................................................................................................146 REGISTER 0X2AC : RMAC PACKET DESCRIPTOR REFERENCE SMALL BUFFER FREE QUEUE WRITE..............................................................................................................147 REGISTER 0X2B0 : RMAC PACKET DESCRIPTOR REFERENCE SMALL BUFFER FREE QUEUE READ ...............................................................................................................148 REGISTER 0X2B4 : RMAC PACKET DESCRIPTOR REFERENCE SMALL BUFFER FREE QUEUE END..................................................................................................................149 REGISTER 0X2B8 : RMAC PACKET DESCRIPTOR REFERENCE READY QUEUE START ...150 REGISTER 0X2BC : RMAC PACKET DESCRIPTOR REFERENCE READY QUEUE WRITE ..151 REGISTER 0X2C0 : RMAC PACKET DESCRIPTOR REFERENCE READY QUEUE READ ....152 REGISTER 0X2C4 : RMAC PACKET DESCRIPTOR REFERENCE READY QUEUE END.......153 v PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER REGISTER 0X300 : TMAC CONTROL .......................................................................................154 REGISTER 0X304 : TMAC INDIRECT CHANNEL PROVISIONING ..........................................156 REGISTER 0X308 : TMAC DESCRIPTOR TABLE BASE LSW ..................................................158 REGISTER 0X30C : TMAC DESCRIPTOR TABLE BASE MSW.................................................159 REGISTER 0X310 : TMAC QUEUE BASE LSW ........................................................................161 REGISTER 0X314 : TMAC QUEUE BASE MSW .......................................................................162 REGISTER 0X318 : TMAC DESCRIPTOR REFERENCE FREE QUEUE START .....................164 REGISTER 0X31C TMAC DESCRIPTOR REFERENCE FREE QUEUE WRITE ......................165 REGISTER 0X320 : TMAC DESCRIPTOR REFERENCE FREE QUEUE READ.......................166 REGISTER 0X324 : TMAC DESCRIPTOR REFERENCE FREE QUEUE END .........................167 REGISTER 0X328 :TMAC DESCRIPTOR REFERENCE READY QUEUE START....................168 REGISTER 0X32C : TMAC DESCRIPTOR REFERENCE READY QUEUE WRITE ..................169 REGISTER 0X330 : TMAC DESCRIPTOR REFERENCE READY QUEUE READ ....................170 REGISTER 0X334 : TMAC DESCRIPTOR REFERENCE READY QUEUE END.......................171 REGISTER 0X380 : THDL INDIRECT CHANNEL SELECT .......................................................172 REGISTER 0X384 : THDL INDIRECT CHANNEL DATA #1........................................................174 REGISTER 0X388 : THDL INDIRECT CHANNEL DATA #2........................................................177 REGISTER 0X38C : THDL INDIRECT CHANNEL DATA #3 .......................................................179 REGISTER 0X3A0 : THDL INDIRECT BLOCK SELECT............................................................183 REGISTER 0X3A4 : THDL INDIRECT BLOCK DATA .................................................................185 REGISTER 0X3B0 : THDL CONFIGURATION ...........................................................................187 REGISTER 0X400 : TCAS INDIRECT LINK AND TIME-SLOT SELECT....................................189 REGISTER 0X404 : TCAS INDIRECT CHANNEL DATA ............................................................191 REGISTER 0X408 : TCAS FRAMING BIT THRESHOLD...........................................................193 vi PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER REGISTER 0X40C : TCAS IDLE TIME-SLOT FILL DATA ...........................................................195 REGISTER 0X410 : TCAS CHANNEL DISABLE........................................................................196 REGISTER 0X480 : TCAS LINK #0 CONFIGURATION .............................................................198 REGISTER 0X484-0X488 : TCAS LINK #1 TO LINK #2 CONFIGURATION ..............................200 REGISTER 0X48C : TCAS LINK #3 CONFIGURATION.............................................................202 REGISTER 0X490-0X49C : TCAS LINK #4 TO LINK #7 CONFIGURATION .............................204 REGISTER 0X500 : PMON STATUS ..........................................................................................206 REGISTER 0X504 : PMON RECEIVE FIFO OVERFLOW COUNT ...........................................208 REGISTER 0X508 : PMON RECEIVE FIFO UNDERFLOW COUNT.........................................210 REGISTER 0X50C : PMON CONFIGURABLE COUNT #1........................................................212 REGISTER 0X510 : PMON CONFIGURABLE COUNT #2 ........................................................214 REGISTER 0X00 : VENDOR IDENTIFICATION/DEVICE IDENTIFICATION..............................217 REGISTER 0X04 : COMMAND/STATUS ....................................................................................218 REGISTER 0X08 : REVISION IDENTIFIER/CLASS CODE .......................................................221 REGISTER 0X0C : CACHE LINE SIZE/LATENCY TIMER/HEADER TYPE ...............................222 REGISTER 0X10 : CBI MEMORY BASE ADDRESS REGISTER ..............................................223 REGISTER 0X3C : INTERRUPT LINE / INTERRUPT PIN / MIN_GNT / MAX_LAT...................225 vii PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER LIST OF FIGURES FIGURE 1 - HDLC FRAME ..........................................................................................................33 FIGURE 2 - CRC GENERATOR ..................................................................................................33 FIGURE 3 - PARTIAL PACKET BUFFER STRUCTURE..............................................................37 FIGURE 4 - RECEIVE PACKET DESCRIPTOR ..........................................................................39 FIGURE 5 - RECEIVE PACKET DESCRIPTOR TABLE...............................................................42 FIGURE 6 - RPDRF AND RPDRR QUEUES ..............................................................................44 FIGURE 7 - RPDRR QUEUE OPERATION .................................................................................46 FIGURE 8 - RECEIVE CHANNEL DESCRIPTOR REFERENCE TABLE ....................................47 FIGURE 9 - GPIC ADDRESS MAP .............................................................................................53 FIGURE 10 - TRANSMIT DESCRIPTOR.....................................................................................55 FIGURE 11 - TRANSMIT DESCRIPTOR TABLE .........................................................................58 FIGURE 12 - TDRR AND TDRF QUEUES ..................................................................................60 FIGURE 13 - TRANSMIT CHANNEL DESCRIPTOR REFERENCE TABLE................................62 FIGURE 14 - TD LINKING ...........................................................................................................65 FIGURE 15 - PARTIAL PACKET BUFFER STRUCTURE............................................................68 FIGURE 16 - INPUT OBSERVATION CELL (IN_CELL).............................................................238 FIGURE 17 - OUTPUT CELL (OUT_CELL) ..............................................................................239 FIGURE 18 - BI-DIRECTIONAL CELL (IO_CELL) ....................................................................240 FIGURE 19 - LAYOUT OF OUTPUT ENABLE AND BI-DIRECTIONAL CELLS........................240 FIGURE 20 - BOUNDARY SCAN ARCHITECTURE .................................................................242 FIGURE 21 - TAP CONTROLLER FINITE STATE MACHINE ....................................................244 FIGURE 22 - UNCHANNELISED RECEIVE LINK TIMING .......................................................248 FIGURE 23 - CHANNELISED T1 RECEIVE LINK TIMING........................................................248 viii PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER FIGURE 24 - CHANNELISED E1 RECEIVE LINK TIMING .......................................................249 FIGURE 25 - UNCHANNELISED TRANSMIT LINK TIMING .....................................................249 FIGURE 26 - CHANNELISED T1 TRANSMIT LINK TIMING .....................................................250 FIGURE 27 - CHANNELISED E1 TRANSMIT LINK TIMING.....................................................250 FIGURE 28 - PCI READ CYCLE ...............................................................................................252 FIGURE 29 - PCI WRITE CYCLE ..............................................................................................253 FIGURE 30 - PCI TARGET DISCONNECT................................................................................254 FIGURE 31 - PCI TARGET ABORT ...........................................................................................254 FIGURE 32 - PCI BUS REQUEST CYCLE................................................................................255 FIGURE 33 - PCI INITIATOR ABORT TERMINATION...............................................................255 FIGURE 34 - PCI EXCLUSIVE LOCK CYCLE ..........................................................................256 FIGURE 35 - PCI FAST BACK TO BACK...................................................................................258 FIGURE 36 - RECEIVE BERT PORT TIMING...........................................................................258 FIGURE 37 - TRANSMIT BERT PORT TIMING ........................................................................259 FIGURE 38 - RECEIVE LINK INPUT TIMING ...........................................................................264 FIGURE 39 - BERT INPUT TIMING...........................................................................................264 FIGURE 40 - TRANSMIT LINK OUTPUT TIMING .....................................................................265 FIGURE 41 - BERT OUTPUT TIMING.......................................................................................266 FIGURE 42 - PCI INTERFACE TIMING .....................................................................................267 FIGURE 43 - JTAG PORT INTERFACE TIMING........................................................................268 FIGURE 44 - 256 PIN ENHANCED BALL GRID ARRAY (SBGA) .............................................270 FIGURE 45 - 272 PIN PLASTIC BALL GRID ARRAY (PBGA) ..................................................271 ix PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER LIST OF TABLES TABLE 1 - LINE SIDE INTERFACE SIGNALS (36)......................................................................11 TABLE 2 - PCI HOST INTERFACE SIGNALS (51) ......................................................................15 TABLE 3 - MISCELLANEOUS INTERFACE SIGNALS (12).........................................................24 TABLE 4 - PRODUCTION TEST INTERFACE SIGNALS (30) .....................................................25 TABLE 5 - DON'T CARE SIGNALS (58) ......................................................................................27 TABLE 6 - NO-CONNECT SIGNALS (9)......................................................................................29 TABLE 7 - POWER AND GROUND SIGNALS (60) .....................................................................30 TABLE 8 - RECEIVE PACKET DESCRIPTOR FIELDS................................................................39 TABLE 9 - RPDRR QUEUE ELEMENT........................................................................................45 TABLE 10 - RECEIVE CHANNEL DESCRIPTOR REFERENCE TABLE FIELDS .......................47 TABLE 11 - TRANSMIT DESCRIPTOR FIELDS ..........................................................................55 TABLE 12 - TRANSMIT DESCRIPTOR REFERENCE ................................................................61 TABLE 13 - TRANSMIT CHANNEL DESCRIPTOR REFERENCE TABLE FIELDS.....................62 TABLE 14 - NORMAL MODE PCI HOST ACCESSIBLE REGISTER MEMORY MAP ................72 TABLE 15 - PCI CONFIGURATION REGISTER MEMORY MAP ................................................75 TABLE 16 - BIG ENDIAN FORMAT..............................................................................................99 TABLE 17 - LITTLE ENDIAN FORMAT ........................................................................................99 TABLE 18 - CRC[1:0] SETTINGS ..............................................................................................120 TABLE 19 - RPQ_RDYN[2:0] SETTINGS...................................................................................132 TABLE 20 - RPQ_LFN[1:0] SETTINGS......................................................................................133 TABLE 21 - RPQ_SFN[1:0] SETTINGS .....................................................................................133 TABLE 22 - TDQ_RDYN[2:0] SETTINGS ...................................................................................155 TABLE 23 - TDQ_FRN[1:0] SETTINGS .....................................................................................155 x PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER TABLE 24 - CRC[1:0] SETTINGS ..............................................................................................175 TABLE 25 - FLAG[2:0] SETTINGS.............................................................................................180 TABLE 26 - LEVEL[3:0]/TRANS SETTINGS..............................................................................181 TABLE 27 - TEST MODE REGISTER MEMORY MAP ..............................................................227 TABLE 28 - INSTRUCTION REGISTER ....................................................................................228 TABLE 29 - BOUNDARY SCAN CHAIN .....................................................................................228 TABLE 30 - FREEDM-EQUAD CONNECTIONS.......................................................................241 TABLE 31 - FREEDM-TOCTL CONNECTIONS........................................................................241 TABLE 32 - FREEDM-8 ABSOLUTE MAXIMUM RATINGS.......................................................260 TABLE 33 - FREEDM-8 D.C. CHARACTERISTICS ...................................................................261 TABLE 34 - FREEDM-8 LINK INPUT (FIGURE 38, FIGURE 39) ..............................................263 TABLE 35 - FREEDM-8 LINK OUTPUT (FIGURE 40, FIGURE 41) ..........................................264 TABLE 36 - PCI INTERFACE (FIGURE 42) ...............................................................................266 TABLE 37 - JTAG PORT INTERFACE (FIGURE 43)..................................................................267 TABLE 38 - FREEDM-8 ORDERING INFORMATION................................................................269 TABLE 39 - FREEDM-8 THERMAL INFORMATION ..................................................................269 xi PM7366 FREEDM-8 DATA SHEET PMC-970930 1 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER FEATURES * Single-chip Peripheral Component Interconnect (PCI) Bus multi-channel HDLC controller. * Supports up to 128 bi-directional HDLC channels assigned to a maximum of 8 channelised T1 or E1 links. The number of time-slots assigned to an HDLC channel is programmable from 1 to 24 (for T1) and from 1 to 31 (for E1). * Supports up to 8 bi-directional HDLC channels each assigned to an unchannelised arbitrary rate link; subject to a maximum aggregate link clock rate of 64 MHz in each direction. Channels assigned to links 0 to 2 can have a clock rate of up 52 MHz when SYSCLK is at 33 MHz. Channels assigned to links 3 to 7 can have a clock rate of up to 10 MHz. * Supports up to two bi-directional HDLC Channels each assigned to an unchannelised arbitrary rate link of up to 52 MHz when SYSCLK is at 33 MHz. * Supports a mix of up to 8 channelised and unchannelised links; subject to the constraint of a maximum of 128 channels and a maximum aggregate link clock rate of 64 MHz in each direction. * For each channel, the HDLC receiver performs flag sequence detection, bit de-stuffing, and frame check sequence validation. The receiver supports the validation of both CRC-CCITT and CRC-32 frame check sequences. The receiver also checks for packet abort sequences, octet aligned packet length and for minimum and maximum packet length. * Alternatively, for each channel, the receiver supports a transparent mode where each octet is transferred transparently to host memory. For channelised links, the octets are aligned with the receive time-slots. * For each channel, time-slots are selectable to be in 56 kbits/s format or 64 kbits/s clear channel format. * For each channel, the HDLC transmitter performs flag sequence generation, bit stuffing, and, optionally, frame check sequence generation. The transmitter supports the generation of both CRC-CCITT and CRC-32 frame check sequences. The transmitter also aborts packets under the direction of the host or automatically when the channel underflows. * Supports two levels of non-preemptive packet priority on each transmit channel. Low priority packets will not begin transmission until all high priority packets are transmitted. * Alternatively, for each channel, the transmitter supports a transparent mode where each octet is inserted transparently from host memory. For channelised links, the octets are aligned with the transmit time-slots. * Directly supports a 32-bit, 33 MHz PCI 2.1 interface for configuration, monitoring and transfer of packet data, with an on-chip DMA controller with scatter/gather capabilities. 1 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER * Provides 8 kbytes of on-chip memory for partial packet buffering in each direction. This memory can be configured to support a variety of different channel configurations from a single channel with 8 kbytes of buffering to 128 channels, each with a minimum of 48 bytes of buffering. * Supports PCI burst sizes of up to 128 bytes for transfers of packet data. * Pin compatible with PM7364 (FREEDM-32) device. * Provides a standard 5 signal P1149.1 JTAG test port for boundary scan board test purposes. * Supports 3.3 and 5 Volt PCI signaling environments. * Low power CMOS technology. * 256 pin enhanced ball grid array (SBGA) or 272 pin plastic ball grid array (PBGA) packages (27 mm X 27 mm). 2 PM7366 FREEDM-8 DATA SHEET PMC-970930 2 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER APPLICATIONS * IETF PPP interfaces for routers * Frame Relay interfaces for ATM or Frame Relay switches and multiplexors * FUNI or Frame Relay service inter-working interfaces for ATM switches and multiplexors. * D-channel processing in ISDN terminals and switches. * Internet/Intranet access equipment. * Packet-based DSLAM equipment. 3 PM7366 FREEDM-8 DATA SHEET PMC-970930 3 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER REFERENCES 1. International Organization for Standardization, ISO Standard 3309-1993, "Information Technology - Telecommunications and information exchange between systems - High-level data link control (HDLC) procedures - Frame structure", December 1993. 2. RFC-1662 - "PPP in HDLC-like Framing" Internet Engineering Task Force, July 1994. 3. PCI Special Interest Group, PCI Local Bus Specification, June 1, 1995, Version 2.1. 4 PM7366 FREEDM-8 DATA SHEET PMC-970930 4 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER APPLICATION EXAMPLES HDLC BASED UPLINK SIDE ACCESS SIDE DS3 PM8313 D3MX PM4388 TOCTL PM7366 FREEDM FREEDM-8 M13 Access Module T1 PM4314 QDSX PM4388 TOCTL T1 Access Modu le E1 PM4314 QDSX PM6344 EQUAD HSSI Module PCI Bus DS3/E3 Framer LIU Packet Memory Microprocessor HSSI DS3/E3/J2 HDLC Based Uplink Module Processor Module E1 Access Module ATM CELL BASED UPLINK SIDE ACCESS SIDE PM7345 S/UNI-PDH PM7366 FREEDM-8 T3/E3 DS-3/E3 ATM SAR PCI Bus PM5346 PM5348 S/UNI-LITE S/UNI-DUAL OC-3 STS-3c ATM UNI xDSL XDSL PHY Packet Memory Microprocessor PM5347 S/UNI-PLUS OC-3 xDSL Access Module STS-3c ATM NNI PM7322 RCMP PM5355 S/UNI-622 Processor Module 5 STS-12c ATM UNI/NNI OC-12 6 TD[7:0] TCLK[7:0] Transmit Channel Assigner (TCAS) Transmit HDLC Processor / Partial Packet Buffer (THDL) Transmit DMA Controller (TMAC) ISSUE 3 PCI Controller (GPIC) Performance Monitor (PMON) AD[31:0] C/BEB[3:0] PAR FRAMEB TRDYB IRDYB STOPB DEVSELB IDSEL LOCKB DATA SHEET Receive DMA Controller (RMAC) BLOCK DIAGRAM Receive HDLC Processor / Partial Packet Buffer (RHDL) PMC-970930 5 . Receive Channel Assigner (RCAS) RSTB RCLK[7:0] RBCLK RBD RD[7:0] REQB GNTB PERRB SERRB PCIINTB PCICLK PCICLKO SYSCLK JTAG Port PM7366 FREEDM-8 FRAME ENGINE AND DATA LINK MANAGER PMCTEST TDO TDI TCK TMS TRSTB TBCLK TBD PM7366 FREEDM-8 DATA SHEET PMC-970930 6 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER DESCRIPTION The PM7366 FREEDM-8 Frame Engine and Datalink Manager device is a monolithic integrated circuit that implements HDLC processing, and PCI Bus memory management functions for a maximum of 128 bi-directional channels. For channelised links, the FREEDM-8 allows up to 128 bi-directional HDLC channels to be assigned to individual time-slots within a maximum of 8 independently timed T1 or E1 links. The channel assignment supports the concatenation of time-slots (N x DS0) up to a maximum of 24 concatenated time-slots for a T1 link and 31 concatenated time-slots for an E1 link. Time-slots assigned to any particular channel need not be contiguous within the T1 or E1 link. For unchannelised links, the FREEDM-8 processes up to 8 bi-directional HDLC channels within 8 independently timed links. The links can be of arbitrary frame format. When limited to two unchannelised links, each link can be rated at up to 52 MHz when SYSCLK is at 33 MHz. For lower rate unchannelised links, the FREEDM-8 processes up to 8 links, where the aggregate clock rate of all the links is limited to 64 MHz, links 0 to 2 can have a clock rate of up to 52 MHz when SYSCLK is at 33 MHz and links 3 to 7 can have a clock rate of up to 10 MHz. The FREEDM-8 also supports mixing of up to 8 channelised and unchannelised links. The total number of channels in each direction is limited to 128. The aggregate clock rate over all 8 possible links is limited to 64 MHz. In the receive direction, the FREEDM-8 performs channel assignment and packet extraction and validation. For each provisioned HDLC channel, the FREEDM-8 delineates the packet boundaries using flag sequence detection, and performs bit de-stuffing. Sharing of opening and closing flags, as well as, sharing of zeros between flags are supported. The resulting packet data is placed into the internal 8 kbyte partial packet buffer RAM. The partial packet buffer acts as a logical FIFO for each of the assigned channels. Partial packets are DMA'd out of the RAM, across the PCI bus and into host packet memory. The FREEDM-8 validates the frame check sequence for each packet, and verifies that the packet is an integral number of octets in length and is within a programmable minimum and maximum length. The receive packet status is updated before linking the packet into a receive ready queue. The FREEDM-8 alerts the PCI Host that there are packets in a receive ready queue by, optionally, asserting an interrupt on the PCI bus. Alternatively, in the receive direction, the FREEDM-8 supports a transparent operating mode. For each provisioned transparent channel, the FREEDM-8 directly transfers the received octets into host memory verbatim. If the transparent channel is assigned to a channelised link, then the octets are aligned to the received time-slots. In the transmit direction, the PCI Host provides packets to transmit using a transmit ready queue. For each provisioned HDLC channel, the FREEDM-8 DMA's partial packets across the PCI bus and into the transmit partial packet buffer. The partial packets are read out of the packet buffer by the FREEDM-8 and frame check sequence is optionally calculated and inserted at the end of each packet. Bit stuffing is performed before being assigned to a particular link. The flag sequence is automatically inserted when there is no packet data for a particular channel. Sequential packets are optionally separated by two flags (an opening flag and a closing flag) or a single flag 7 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER (combined opening and closing flag). Zeros between flags are not shared. PCI bus latency may cause one or more channels to underflow, in which case, the packets are aborted, and the host is notified. For normal traffic, an abort sequence is generated, followed by inter-frame time fill characters (flags or all-ones bytes) until a new packet is sourced from the PCI host. No attempt is made to automatically re-transmit an aborted packet. Alternatively, in the transmit direction, the FREEDM-8 supports a transparent operating mode. For each provisioned transparent channel, the FREEDM-8 directly inserts the transmitted octets from host memory. If the transparent channel is assigned to a channelised link, then the octets are aligned to the transmitted time-slots. If a channel underflows due to excessive PCI bus latency, an abort sequence is generated, followed by inter-frame time fill characters (flags or all-ones bytes) to indicate idle channel. Data resumes immediately when the FREEDM-8 receives new data from the host. The FREEDM-8 is configured, controlled and monitored using the PCI bus interface. The FREEDM-8 is implemented in low power CMOS technology, with TTL compatible inputs and outputs. The FREEDM-8 is available in two package options; a 256 pin enhanced ball grid array (SBGA) package, or a 272 pin plastic ball grid array (PBGA) package. 8 PM7366 FREEDM-8 DATA SHEET PMC-970930 7 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER PIN DIAGRAM The PM7366-BI FREEDM-8 is manufactured in a 256 pin enhanced ball grid array (SBGA) package. 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A VSS VSS VSS X X TA[2] TA[4] VSS TA[7] TA[9] VSS VSS X X X X X VSS VSS VSS A B VSS VDD VDD X TA[0] X X X X X TA[10] X X X X X X VDD VDD VSS B C VSS VDD VDD RD[7] X TA[1] X X TA[6] TA[8] X TA[11]/ TRS TWRB X X X PCICLK VDD VDD VSS C D RD[5] RCLK[5] RCLK[6] EN5V RCLK[7] X VDD TA[3] TA[5] X VDD TRDB X VDD X PCICLKO VBIAS[2] GNTB AD[31] AD[30] D E RD[3] RCLK[3] RCLK[4] RD[6] REQB AD[29] AD[27] AD[26] E F RCLK[1] RD[2] RCLK[2] RD[4] AD[28] AD[25] AD[24] CBEB[3] F G RBCLK RD[0] RD[1] VDD VDD IDSEL AD[22] AD[21] G H VBIAS[1] SYSCLK RBD RCLK[0] AD[23] AD[20] AD[18] VSS H J VSS TCK TMS TRSTB AD[19] AD[17] AD[16] CBEB[2] J K VSS TDI TDO VDD FRAMEB IRDYB TRDYB DEVSELB K BOTTOM VIEW L TD[0] TCLK[0] TD[1] TCLK[1] VDD STOPB LOCKB VSS L M TD[2] TCLK[2] TD[3] TD[4] CBEB[1] SERRB PERRB VSS M N VSS TCLK[3] TCLK[4] TD[6] AD[11] AD[14] AD[15] PAR N P TD[5] TCLK[5] TCLK[6] VDD VDD AD[10] AD[12] AD[13] P R TD[7] TCLK[7] NC X AD[5] CBEB[0] AD[8] AD[9] R T X NC NC X AD[1] AD[4] AD[6] AD[7] T U X NC NC NC NC NC VDD X TDAT[5] VDD X V VSS VDD VDD X X X TDAT[2] TDAT[4] TDAT[6] X TDAT[9] TDAT[11] W VSS VDD VDD X X TDAT[1] TDAT[3] X X TDAT[7] X Y VSS VSS VSS NC TDAT[0] X X X VSS VSS 20 19 18 17 16 15 14 13 12 11 9 TDAT[12] TDAT[14] VDD PMCTEST X VBIAS[3] AD[0] AD[2] AD[3] U X X TBD PCIINTB X VDD VDD VSS V X X X X RSTB X VDD VDD VSS W TDAT[8] TDAT[10] VSS TBCLK X VSS VSS VSS Y 10 9 8 5 4 3 2 1 TDAT[13] TDAT[15] 7 6 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The PM7366-PI FREEDM-8 is manufactured in a 272 pin plastic ball grid array (PBGA) package. 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A VSS NC NC X X X X X X TA[9] X X X TA[3] TA[2] X X NC NC VSS A B NC VBIAS[2] NC PCICLK X X X TWRB TA[11]/ TRS TA[10] TA[8] TA[6] TA[4] X TA[1] X RCLK[7] NC NC NC B C NC NC VDD PCICLKO X X X X X X X X X X X X ENV5 VDD NC NC C D AD[29] AD[31] GNTB VSS X VDD X VSS TRDB VDD TA[7] TA[5] VSS TA[0] VDD RD[7] VSS NC RCLK[6] RCLK[5] D E AD[25] AD[28] AD[30] REQB RD[6] RD[5] RCLK[4] RD[4] E F IDSEL AD[24] AD[27] VDD VDD RCLK[3] RCLK[2] RD[2] F BOTTOM VIEW G AD[22] AD[23] CBEB[3] AD[26] RD[3] RCLK[1] RD[1] RCLK[0] G H AD[19] AD[20] AD[21] VSS VSS RD[0] RBCLK RBD H J CBEB[2] AD[16] AD[17] AD[18] VSS VSS VSS VSS SYSCLK TRSTB VBIAS[1] TMS J K DEVSELB TRDYB IRDYB FRAMEB VSS VSS VSS VSS VDD TDI TCK TDO K L STOPB PERRB LOCKB VDD VSS VSS VSS VSS TCLK[1] TD[1] TCLK[0] TD[0] L M SERRB PAR CBEB[1] AD[15] VSS VSS VSS VSS TCLK[3] TD[3] TCLK[2] TD[2] M N AD[14] AD[13] AD[12] VSS VSS TD[5] TCLK[4] TD[4] N P AD[11] AD[10] AD[9] NC X TD[7] TD[6] TCLK[5] P R AD[8] CBEB[0] AD[7] VDD VDD NC TCLK[7] TCLK[6] R T AD[6] AD[5] AD[4] AD[2] X X X NC T U AD[3] AD[0] AD[1] VSS X VDD RSTB VSS V NC NC VDD NC X PMCTEST X X W NC VBIAS[3] NC X PCINTB TBD X Y VSS NC NC X TBCLK 20 19 18 17 16 TDAT[15] TDAT[14] 15 14 TDAT[12] TDAT[10] X TDAT[13] TDAT[11] VDD TDAT[5] VSS X VDD X VSS NC NC NC U X X X X TDAT[2] TDAT[0] X NC VDD NC NC V TDAT[9] TDAT[7] TDAT[6] TDAT[4] X TDAT[1] NC X NC NC NC W Y X X X TDAT[8] X X TDAT[3] X X NC NC NC VSS 13 12 11 10 9 8 7 6 5 4 3 2 1 10 PM7366 FREEDM-8 DATA SHEET PMC-970930 8 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER PIN DESCRIPTION Table 1 - Line Side Interface Signals (36) Pin Name RCLK[0] RCLK[1] RCLK[2] RCLK[3] RCLK[4] RCLK[5] RCLK[6] RCLK[7] Pin No. Type Input -PI -BI G1 G3 F2 F3 E2 D1 D2 B4 H17 F20 F18 E19 E18 D19 D18 D16 Function The receive line clock signals (RCLK[7:0]) contain the recovered line clock for the 8 independently timed links. Processing of the receive links is on a priority basis, in descending order from RCLK[0] to RCLK[7]. Therefore, the highest rate link should be connected to RCLK[0] and the lowest to RCLK[7]. RD[7:0] is sampled on the rising edge of the corresponding RCLK[7:0] clock. For channelised T1 or E1 links, RCLK[n] must be gapped during the framing bit (for T1 interfaces) or during time-slot 0 (for E1 interfaces) of the RD[n] stream. The FREEDM-8 uses the gapping information to determine the time-slot alignment in the receive stream. RCLK[7:0] is nominally a 50% duty cycle clock of 1.544 MHz for T1 links and 2.048 MHz for E1 links. For unchannelised links, RCLK[n] must be externally gapped during the bits or time-slots that are not part of the transmission format payload (i.e. not part of the HDLC packet). RCLK[2:0] is nominally a 50% duty cycle clock between 0 and 52 MHz. RCLK[7:3] is nominally a 50% duty cycle clock between 0 and 10 MHz. 11 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin Name RD[0] RD[1] RD[2] RD[3] RD[4] RD[5] RD[6] RD[7] Type Input FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI H3 G2 F1 G4 E1 E3 E4 D5 G19 G18 F19 E20 F17 D20 E17 C17 Function The receive data signals (RD[7:0]) contain the recovered line data for the 8 independently timed links. Processing of the receive links is on a priority basis, in descending order form RD[0] to RD[7]. Therefore, the highest rate link should be connected to RD[0] and the lowest to RD[7]. For channelised links, RD[n] contains the 24 (T1) or 31 (E1) time-slots that comprise the channelised link. RCLK[n] must be gapped during the T1 framing bit position or the E1 frame alignment signal (time-slot 0). The FREEDM-8 uses the location of the gap to determine the channel alignment on RD[n]. For unchannelised links, RD[n] contains the HDLC packet data. For certain transmission formats, RD[n] may contain place holder bits or time-slots. RCLK[n] must be externally gapped during the place holder positions in the RD[n] stream. The FREEDM-8 supports a maximum data rate of 10 Mbit/s on an individual RD[7:3] link and a maximum data rate of 52 Mbit/s on RD[2:0]. RD[7:0] is sampled on the rising edge of the corresponding RCLK[7:0] clock. RBD Tristate Output H1 H18 The receive BERT data signal (RBD) contains the receive bit error rate test data. RBD reports the data on the selected one of the receive data signals (RD[7:0]) and is updated on the falling edge of RBCLK. RBD may be tri-stated by setting the RBEN bit in the FREEDM-8 Master BERT Control register low. RBCLK Tristate Output H2 G20 The receive BERT clock signal (RBCLK) contains the receive bit error rate test clock. RBCLK is a buffered version of the selected one of the receive clock signals (RCLK[7:0]). RBCLK may be tri-stated by setting the RBEN bit in the FREEDM-8 Master BERT Control register low. 12 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin Name TCLK[0] TCLK[1] TCLK[2] TCLK[3] TCLK[4] TCLK[5] TCLK[6] TCLK[7] Type Input FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI L2 L4 M2 M4 N2 P1 R1 R2 L19 L17 M19 N19 N18 P19 P18 R19 Function The transmit line clock signals (TCLK[7:0]) contain the transmit clocks for the 8 independently timed links. Processing of the transmit links is on a priority basis, in descending order from TCLK[0] to TCLK[7]. Therefore, the highest rate link should be connected to TCLK[0] and the lowest to TCLK[7]. TD[7:0] is updated on the falling edge of the corresponding TCLK[7:0] clock. For channelised T1 or E1 links, TCLK[n] must be gapped during the framing bit (for T1 interfaces) or during time-slot 0 (for E1 interfaces) of the TD[n] stream. The FREEDM-8 uses the gapping information to determine the time-slot alignment in the transmit stream. For unchannelised links, TCLK[n] must be externally gapped during the bits or time-slots that are not part of the transmission format payload (i.e. not part of the HDLC packet). TCLK[7:3] is nominally a 50% duty cycle clock between 0 and 10 MHz. TCLK[2:0] is nominally a 50% duty cycle clock between 0 and 52 MHz. Typical values for TCLK[7:0] include 1.544 MHz (for T1 links) and 2.048 MHz (for E1 links). 13 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin Name TD[0] TD[1] TD[2] TD[3] TD[4] TD[5] TD[6] TD[7] Type Output FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI L1 L3 M1 M3 N1 N3 P2 P3 L20 L18 M20 M18 M17 P20 N17 R20 Function The transmit data signals (TD[7:0]) contains the transmit data for the 8 independently timed links. Processing of the transmit links is on a priority basis, in descending order from TD[0] to TD[7]. Therefore, the highest rate link should be connected to TD[0] and the lowest to TD[7]. For channelised links, TD[n] contains the 24 (T1) or 31 (E1) time-slots that comprise the channelised link. TCLK[n] must be gapped during the T1 framing bit position or the E1 frame alignment signal (time-slot 0). The FREEDM-8 uses the location of the gap to determine the channel alignment on TD[n]. For unchannelised links, TD[n] contains the HDLC packet data. For certain transmission formats, TD[n] may contain place holder bits or time-slots. TCLK[n] must be externally gapped during the place holder positions in the TD[n] stream. The FREEDM-8 supports a maximum data rate of 10 Mbit/s on an individual TD[7:3] link and a maximum data rate of 52 Mbit/s on TD[2:0] TD[7:0] is updated on the falling edge of the corresponding TCLK[7:0] clock. TBD Input W15 V6 The transmit BERT data signal (TBD) contains the transmit bit error rate test data. When the TBERTEN bit in the BERT Control register is set high, the data on TBD is transmitted on the selected one of the transmit data signals (TD[7:0]). TBD is sampled on the rising edge of TBCLK. TBCLK Tristate Output Y16 Y5 The transmit BERT clock signal (TBCLK) contains the transmit bit error rate test clock. TBCLK is a buffered version of the selected one of the transmit clock signals (TCLK[7:0]). TBCLK may be tri-stated by setting the TBEN bit in the FREEDM-8 Master BERT Control register low. 14 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 2 - PCI Host Interface Signals (51) Pin Name Type Pin No. -PI -BI Function PCICLK Input B17 C4 The PCI clock signal (PCICLK) provides timing for PCI bus accesses. PCICLK is a nominally 50% duty cycle, 0 to 33 MHz clock. PCICLKO Output C17 D5 The PCI clock output signal (PCICLKO) is a buffered version of the PCICLK. PCICLKO may be used to drive the SYSCLK input. AD[0] AD[1] AD[2] AD[3] AD[4] AD[5] AD[6] AD[7] AD[8] AD[9] AD[10] AD[11] AD[12] AD[13] AD[14] AD[15] AD[16] AD[17] AD[18] AD[19] AD[20] AD[21] AD[22] AD[23] AD[24] AD[25] AD[26] AD[27] AD[28] AD[29] AD[30] I/O U19 U18 T17 U20 T18 T19 T20 R18 R20 P18 P19 P20 N18 N19 N20 M17 J19 J18 J17 H20 H19 H18 G20 G19 F19 E20 G17 F18 E19 D20 E18 U3 T4 U2 U1 T3 R4 T2 T1 R2 R1 P3 N4 P2 P1 N3 N2 J2 J3 H2 J4 H3 G1 G2 H4 F2 F3 E1 E2 F4 E3 D1 The PCI address and data bus (AD[31:0]) carries the PCI bus multiplexed address and data. During the first clock cycle of a transaction, AD[31:0] contains a physical byte address. During subsequent clock cycles of a transaction, AD[31:0] contains data. A transaction is defined as an address phase followed by one or more data phases. When Little-Endian byte formatting is selected, AD[31:24] contain the most significant byte of a DWORD while AD[7:0] contain the least significant byte. When Big-Endian byte formatting is selected. AD[7:0] contain the most significant byte of a DWORD while AD[31:24] contain the least significant byte. When the FREEDM-8 is the initiator, AD[31:0] is an output bus during the first (address) phase of a transaction. For write transactions, AD[31:0] remains an output bus for the data phases of the transaction. For read transactions, AD[31:0] is an input bus during the data phases. When the FREEDM-8 is the target, AD[31:0] is an input bus during the first (address) phase of a transaction. For write transactions, AD[31:0] remains an input bus during the data phases of the transaction. For read transactions, AD[31:0] is an output bus during the data phases. When the FREEDM-8 is not involved in the current transaction, AD[31:0] is tri-stated. 15 PM7366 FREEDM-8 DATA SHEET PMC-970930 Pin Name ISSUE 3 Type FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI Function AD[31] I/O D19 D2 As an output bus, AD[31:0] is updated on the rising edge of PCICLK. As an input bus, AD[31:0] is sampled on the rising edge of PCICLK. C/BEB[0] C/BEB[1] C/BEB[2] C/BEB[3] I/O R19 M18 J20 G18 R3 M4 J1 F1 The PCI bus command and byte enable bus (C/BEB[3:0]) contains the bus command or the byte valid indications. During the first clock cycle of a transaction, C/BEB[3:0] contains the bus command code. For subsequent clock cycles, C/BEB[3:0] identifies which bytes on the AD[31:0] bus carry valid data. C/BEB[3] is associated with byte 3 (AD[31:24]) while C/BEB[0] is associated with byte 0 (AD[7:0]). When C/BEB[n] is set high, the associated byte is invalid. When C/BEB[n] is set low, the associated byte is valid. When the FREEDM-8 is the initiator, C/BEB[3:0] is an output bus. When the FREEDM-8 is the target, C/BEB[3:0] is an input bus. When the FREEDM-8 is not involved in the current transaction, C/BEB[3:0] is tri-stated. As an output bus, C/BEB[3:0] is updated on the rising edge of PCICLK. As an input bus, C/BEB[3:0] is sampled on the rising edge of PCICLK. 16 PM7366 FREEDM-8 DATA SHEET PMC-970930 Pin Name PAR ISSUE 3 Type I/O FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI M19 N1 Function The parity signal (PAR) indicates the parity of the AD[31:0] and C/BEB[3:0] buses. Even parity is calculated over all 36 signals in the buses regardless of whether any or all the bytes on the AD[31:0] are valid. PAR always reports the parity of the previous PCICLK cycle. Parity errors detected by the FREEDM-8 are indicated on output PERRB and in the FREEDM-8 Interrupt Status register. When the FREEDM-8 is the initiator, PAR is an output for writes and an input for reads. When the FREEDM-8 is the target, PAR is an input for writes and an output for reads. When the FREEDM-8 is not involved in the current transaction, PAR is tri-stated. As an output signal, PAR is updated on the rising edge of PCICLK. As an input signal, PAR is sampled on the rising edge of PCICLK. FRAMEB I/O K17 K4 The active low cycle frame signal (FRAMEB) identifies a transaction cycle. When FRAMEB transitions low, the start of a bus transaction is indicated. FRAMEB remains low to define the duration of the cycle. When FRAMEB transitions high, the last data phase of the current transaction is indicated. When the FREEDM-8 is the initiator, FRAMEB is an output. When the FREEDM-8 is the target, FRAMEB is an input. When the FREEDM-8 is not involved in the current transaction, FRAMEB is tri-stated. As an output signal, FRAMEB is updated on the rising edge of PCICLK. As an input signal, FRAMEB is sampled on the rising edge of PCICLK. 17 PM7366 FREEDM-8 DATA SHEET PMC-970930 Pin Name TRDYB ISSUE 3 Type I/O FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI K19 K2 Function The active low target ready signal (TRDYB) indicates when the target is ready to start or continue with a transaction. TRDYB works in conjunction with IRDYB to complete transaction data phases. During a transaction in progress, TRDYB is set high to indicate that the target cannot complete the current data phase and to force a wait state. TRDYB is set low to indicate that the target can complete the current data phase. The data phase is completed when TRDYB is set low and the initiator ready signal (IRDYB) is also set low. When the FREEDM-8 is the initiator, TRDYB is an input. When the FREEDM-8 is the target, TRDYB is an output. During accesses to FREEDM-8 registers, TRDYB is set high to extend data phases over multiple PCICLK cycles. When the FREEDM-8 is not involved in the current transaction, TRDYB is tri-stated. As an output signal, TRDYB is updated on the rising edge of PCICLK. As an input signal, TRDYB is sampled on the rising edge of PCICLK. 18 PM7366 FREEDM-8 DATA SHEET PMC-970930 Pin Name IRDYB ISSUE 3 Type I/O FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI K18 K3 Function The active low initiator ready (IRDYB) signal is used to indicate whether the initiator is ready to start or continue with a transaction. IRDYB works in conjunction with TRDYB to complete transaction data phases. When IRDYB is set high and a transaction is in progress, the initiator is indicating it cannot complete the current data phase and is forcing a wait state. When IRDYB is set low and a transaction is in progress, the initiator is indicating it has completed the current data phase. The data phase is completed when IRDYB is set low and the target ready signal (IRDYB) is also set low. When the FREEDM-8 is the initiator, IRDYB is an output. When the FREEDM-8 is the target, IRDYB is an input. When the FREEDM-8 is not involved in the current transaction, IRDYB is tri-stated. IRDYB is updated on the rising edge of PCICLK or sampled on the rising edge of PCICLK depending on whether it is an output or an input. 19 PM7366 FREEDM-8 DATA SHEET PMC-970930 Pin Name STOPB ISSUE 3 Type I/O FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI L20 L3 Function The active low stop signal (STOPB) requests the initiator to stop the current bus transaction. When STOPB is set high by a target, the initiator continues with the transaction. When STOPB is set low, the initiator will stop the current transaction. When the FREEDM-8 is the initiator, STOPB is an input. When STOPB is sampled low, the FREEDM-8 will terminate the current transaction in the next PCICLK cycle. When the FREEDM-8 is the target, STOPB is an output. The FREEDM-8 only issues transaction stop requests when responding to reads and writes to configuration space (disconnecting after 1 DWORD transferred) or if an initiator introduces wait states during a transaction. When the FREEDM-8 is not involved in the current transaction, STOPB is tri-stated. STOPB is updated on the rising edge of PCICLK or sampled on the rising edge of PCICLK depending on whether it is an output or an input. IDSEL Input F20 G3 The initialization device select signal (IDSEL) enables read and write access to the PCI configuration registers. When IDSEL is set high during the address phase of a transaction and the C/BEB[3:0] code indicates a register read or write, the FREEDM-8 performs a PCI configuration register transaction and asserts the DEVSELB signal in the next PCICLK period. IDSEL is sampled on the rising edge of PCICLK. 20 PM7366 FREEDM-8 DATA SHEET PMC-970930 Pin Name DEVSELB ISSUE 3 Type I/O FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI K20 K1 Function The active low device select signal (DEVSELB) indicates that a target claims the current bus transaction. During the address phase of a transaction, all targets decode the address on the AD[31:0] bus. When a target, recognizes the address as its own, it sets DEVSELB low to indicate to the initiator that the address is valid. If no target claims the address in six bus clock cycles, the initiator assumes that the target does not exist or cannot respond and aborts the transaction. When the FREEDM-8 is the initiator, DEVSELB is an input. If no target responds to an address in six PCICLK cycles, the FREEDM-8 will abort the current transaction and alerts the PCI Host via an interrupt. When the FREEDM-8 is the target, DEVSELB is an output. DELSELB is set low when the address on AD[31:0] is recognised. When the FREEDM-8 is not involved in the current transaction, DEVSELB is tri-stated. FREEDM-8 is updated on the rising edge of PCICLK or sampled on the rising edge of PCICLK depending on whether it is an output or an input. LOCKB Input L18 L2 The active low bus lock signal (LOCKB) locks a target device. When LOCKB and FRAME are set low, and the FREEDM-8 is the target, an initiator is locking the FREEDM-8 as an "owned" target. Under these circumstances, the FREEDM-8 will reject all transaction with other initiators. The FREEDM-8 will continue to reject other initiators until its owner releases the lock by forcing both FRAMEB and LOCKB high. As a initiator, the FREEDM-8 will never lock a target. LOCKB is sampled using the rising edge of PCICLK. REQB Output E17 E4 The active low PCI bus request signal (REQB) requests an external arbiter for control of the PCI bus. REQB is set low when the FREEDM-8 desires access to the host memory. REQB is set high when access is not desired. REQB is updated on the rising edge of PCICLK. 21 PM7366 FREEDM-8 DATA SHEET PMC-970930 Pin Name GNTB ISSUE 3 Type Input FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI D18 D3 Function The active low PCI bus grant signal (GNTB) indicates the granting of control over the PCI in response to a bus request via the REQB output. When GNTB is set high, the FREEDM-8 does not have control over the PCI bus. When GNTB is set low, the external arbiter has granted the FREEDM-8 control over the PCI bus. However, the FREEDM-8 will not proceed until the FRAMEB signal is sampled high, indicating no current transactions are in progress. GNTB is sampled on the rising edge of PCICLK. PCIINTB OD Output W16 V5 The active low PCI interrupt signal (PCIINTB) is set low when a FREEDM-8 interrupt source is active, and that source is unmasked. The FREEDM-8 may be enabled to report many alarms or events via interrupts. PCIINTB returns high when the interrupt is acknowledged via an appropriate register access. PCIINTB is an open drain output and is updated on the rising edge of PCICLK. PERRB I/O L19 M2 The active low parity error signal (PERRB) indicates a parity error over the AD[31:0] and C/BEB[3:0] buses. Parity error is signalled when even parity calculations do not match the PAR signal. PERRB is set low at the cycle immediately following an offending PAR cycle. PERRB is set high when no parity error is detected. PERRB is enabled by setting the PERREN bit in the Control/Status register in the PCI Configuration registers space. Regardless of the setting of PERREN, parity errors are always reported by the PERR bit in the Control/Status register in the PCI Configuration registers space. PERRB is updated on the rising edge of PCICLK. 22 PM7366 FREEDM-8 DATA SHEET PMC-970930 Pin Name SERRB ISSUE 3 Type OD Output FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI M20 M3 Function The active low system error signal (SERRB) indicates an address parity error. Address parity errors are detected when the even parity calculations during the address phase do not match the PAR signal. When the FREEDM-8 detects a system error, SERRB is set low for one PCICLK period. SERRB is enabled by setting the SERREN bit in the Control/Status register in the PCI Configuration registers space. Regardless of the setting of SERREN, parity errors are always reported by the SERR bit in the Control/Status register in the PCI Configuration registers space. SERRB is an open drain output and is updated on the rising edge of PCICLK. 23 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 3 - Miscellaneous Interface Signals (12) Pin Name Type Pin No. -PI -BI Function SYSCLK Input J4 H19 The system clock (SYSCLK) provides timing for the core logic. SYSCLK is nominally a 50% duty cycle 25 MHz to 33 MHz clock. RSTB Input U14 W5 The active low reset signal (RSTB) signal provides an asynchronous FREEDM-8 reset. RSTB is an asynchronous input. When RSTB is set low, all FREEDM-8 registers are forced to their default states. In addition, TD[7:0] are forced high and all PCI output pins are forced tri-state and will remain high or tri-stated, respectively, until RSTB is set high. PMCTEST Input V15 U6 The PMC production test enable signal (PMCTEST) places the FREEDM-8 is test mode. When PMCTEST is set high, production test vectors can be executed to verify manufacturing via the test mode interface signals TA[10:0], TA[11]/TRS, TRDB, TWRB and TDAT[15:0]. PMCTEST must be tied low in normal operation. TCK Input K2 J19 The test clock signal (TCK) provides timing for test operations that can be carried out using the IEEE P1149.1 test access port. TMS and TDI are sampled on the rising edge of TCK. TDO is updated on the falling edge of TCK. TMS Input J1 J18 The test mode select signal (TMS) controls the test operations that can be carried out using the IEEE P1149.1 test access port. TMS is sampled on the rising edge of TCK. TMS has an integral pull up resistor. TDI Input K3 K19 The test data input signal (TDI) carries test data into the FREEDM-8 via the IEEE P1149.1 test access port. TDI is sampled on the rising edge of TCK. TDI has an integral pull up resistor. TDO Tristate Output K1 K18 The test data output signal (TDO) carries test data out of the FREEDM-8 via the IEEE P1149.1 test access port. TDO is updated on the falling edge of TCK. TDO is a tri-state output which is inactive except when scanning of data is in progress. 24 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin Name TRSTB Type Input FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI J3 J17 Function The active low test reset signal (TRSTB) provides an asynchronous FREEDM-8 test access port reset via the IEEE P1149.1 test access port. TRSTB is an asynchronous input with an integral pull up resistor. Note that when TRSTB is not being used, it must be connected to the RSTB input. VBIAS[3:1] Input J2 B19 W19 U4 D4 H20 The bias signals (VBIAS[3:1]) provide 5 Volt bias to input and I/O pads to allow the FREEDM-8 to tolerate connections to 5 Volt devices. To avoid damage to the device, the VBIAS[3:1] signals must be connected together externally and must at all times be kept at a voltage that is equal to or higher than the VDD[28:1] power supplies. In a 3.3V operating environment, VBIAS[3:1] and VDD[28:1] may be connected together. In a 5V operating environment, VBIAS[3:1] should be powered up to 5V before VDD[28:1] are powered up to 3.3V. EN5V Input C4 D17 The 5 Volt PCI signalling enable signal (EN5V) causes the PCI Host Interface Signals to operate in the 5V PCI signalling environment when set high and the 3.3V PCI signalling environment when set low. EN5V is an asynchronous input with an integral pull up resistor. Table 4 - Production Test Interface Signals (30) Pin Name TA[0] TA[1] TA[2] TA[3] TA[4] TA[5] TA[6] TA[7] TA[8] TA[9] TA[10] Pin No. Type Input -PI -BI D7 B6 A6 A7 B8 D9 B9 D10 B10 A11 B11 B16 C15 A15 D13 A14 D12 C12 A12 C11 A11 B10 Function The test mode address bus (TA[10:0]) selects specific registers during production test (PMCTEST set high) read and write accesses. In normal operation (PMCTEST set low), TA[10:0] should be tied high. 25 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin Name TA[11]/TRS Type Input FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI B12 C9 Function The test register select signal (TA[11]/TRS) selects between normal and test mode register accesses during production test (PMCTEST set high). TRS is set high to select test registers and is set low to select normal registers. In normal operation (PMCTEST set low), TA[11]/ TRS should be tied high. TRDB Input D12 D9 The test mode read enable signal (TRDB) is set low during FREEDM-8 register read accesses during production test (PMCTEST set high). The FREEDM8 drives the test data bus (TDAT[15:0]) with the contents of the addressed register while TRDB is low. In normal operation (PMCTEST set low), TRDB should be tied high. TWRB Input B13 C8 The test mode write enable signal (TWRB) is set low during FREEDM-8 register write accesses during production test (PMCTEST set high). The contents of the test data bus (TDAT[15:0]) are clocked into the addressed register on the rising edge of TWRB. In normal operation (PMCTEST set low), TWRB should be tied high. TDAT[0] TDAT[1] TDAT[2] TDAT[3] TDAT[4] TDAT[5] TDAT[6] TDAT[7] TDAT[8] TDAT[9] TDAT[10] TDAT[11] TDAT[12] TDAT[13] TDAT[14] TDAT[15] I/O V6 W6 V7 Y7 W8 U9 W9 W10 Y10 W11 U11 W12 U12 W13 Y14 Y15 Y16 W15 V14 W14 V13 U12 V12 W11 Y10 V10 Y9 V9 U9 Y7 U8 Y6 The bi-directional test mode data bus (TDAT[15:0]) carries data read from or written to FREEDM-8 registers during production test. In normal operation (PMCTEST set low), TDAT[15:0] should be left unconnected. 26 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 5 - Don't Care Signals (58) Pin Name X Type Input Pin No. -PI -BI A4 A5 A8 A9 A10 A12 A13 A14 A15 A16 A17 B5 B7 B14 B15 B16 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 D14 D16 P4 T2 T3 T4 U5 U7 U16 V5 B17 C16 B7 C7 B6 A5 D6 A4 V4 W4 T20 R17 U20 T17 V17 W17 V16 W16 V15 Y15 U13 Y14 W13 Y13 W12 V11 W10 U10 W9 W8 V8 W7 V7 W6 A17 D15 A16 B15 Function The Don't Care pins X may be connected to logic high or logic low arbitrarily. Optionally, they may be left floating. 27 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin Name X Type Input FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI V8 V9 V10 V11 V12 V13 V14 V16 W4 W7 W14 W17 Y5 Y6 Y8 Y9 Y11 Y12 Y13 Y17 C14 B14 C13 B13 B12 D11 B11 C10 B9 A8 B8 A7 D8 A6 C6 B5 C5 B4 U5 Y4 Function The Don't Care pins X may be connected to logic high or logic low arbitrarily. Optionally, they may be left floating. 28 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 6 - No-Connect Signals (9) Pin Name NC Type Open Pin No. -PI -BI A2 A3 A18 A19 B1 B2 B3 B18 B20 C1 C2 C19 C20 D3 P17 R3 T1 U1 U2 U3 V1 V2 V4 V17 V19 V20 W1 W2 W3 W5 W18 W20 Y2 Y3 Y4 Y18 Y19 U17 R18 T19 T18 U19 U18 U16 Y17 U15 Function The No-Connect pins NC must be left unconnected. 29 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 7 - Power and Ground Signals (60) Pin Name VDD1 VDD2 VDD3 VDD4 VDD5 VDD6 VDD7 VDD8 VDD9 VDD10 VDD11 VDD12 VDD13 VDD14 VDD15 VDD16 VDD17 VDD18 VDD19 VDD20 VDD21 VDD22 VDD23 VDD24 VDD25 VDD26 VDD27 VDD28 Type Power Pin No. -PI -BI C3 C18 D6 D11 D15 F4 F17 K4 L17 R4 R17 U6 U10 U15 V3 V18 B2 B3 B18 B19 C2 C3 C18 C19 D7 D10 D14 G4 G17 K17 L4 P4 P17 U7 U11 U14 V2 V3 V18 V19 W2 W3 W18 W19 Function The DC power pins should be connected to a well decoupled +3.3 V DC supply. 30 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin Name VSS1 VSS2 VSS3 VSS4 VSS5 VSS6 VSS7 VSS8 VSS9 VSS10 VSS11 VSS12 VSS13 VSS14 VSS15 VSS16 VSS17 VSS18 VSS19 VSS20 VSS21 VSS22 VSS23 VSS24 VSS25 VSS26 VSS27 VSS28 VSS29 VSS30 VSS31 VSS32 Type Ground FRAME ENGINE AND DATA LINK MANAGER Pin No. -PI -BI A1 A20 D4 D8 D13 D17 H4 H17 J9 J10 J11 J12 K9 K10 K11 K12 L9 L10 L11 L12 M9 M10 M11 M12 N4 N17 U4 U8 U13 U17 Y1 Y20 A1 A2 A3 A9 A10 A13 A18 A19 A20 B1 B20 C1 C20 H1 J20 K20 L1 M1 N20 V1 V20 W1 W20 Y1 Y2 Y3 Y8 Y11 Y12 Y18 Y19 Y20 Function The DC ground pins should be connected to ground. Notes on Pin Description: 1. All FREEDM-8 inputs and bi-directionals present minimum capacitive loading and operate at TTL compatible logic levels. PCI signals conform to the 3.3 or 5 Volt signaling environment depending on the setting of the EN5V input. 2. Most FREEDM-8 non-PCI digital outputs and bi-directionals have 4 mA drive capability, except the PCICLKO, RBCLK, TBCLK, RBD and PCIINTB outputs which have 6 mA drive capability and the TD[0], TD[1], and TD[2] outputs which have 8 mA drive capability. 31 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER 3. All FREEDM-8 non-PCI digital outputs and bi-directionals are 5 V tolerant when tristated except those with 8 mA drive capability, i.e. TD[2:0]. (TD[2:0] are never tristated in normal operation - only under JTAG boundary scan control.) 4. Inputs TMS, TDI, TRSTB and EN5V are Schmitt triggered and have internal pull-up resistors. 5. Inputs RD[7:0], RCLK[7:0], TCLK[7:0], SYSCLK, PCICLK, TBD, RSTB, GNTB, IDSEL, LOCKB, TCK and PMCTEST are Schmitt triggered. 32 PM7366 FREEDM-8 DATA SHEET PMC-970930 9 9.1 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER FUNCTIONAL DESCRIPTION High-Level Data Link Control Protocol Figure 1 shows a diagram of the synchronous HDLC protocol supported by the FREEDM-8. The incoming stream is examined for flag bytes (01111110 bit pattern) which delineate the opening and closing of the HDLC packet. The packet is bit de-stuffed which discards a "0" bit which directly follows five contiguous "1" bits. The resulting HDLC packet size must be a multiple of an octet (8 bits) and within the expected minimum and maximum packet length limits. The minimum packet length is that of a packet containing two information bytes (address and control) and FCS bytes. For packets with CRC-CCITT as FCS, the minimum packet length is four bytes while those with CRC-32 as FCS, the minimum length is six bytes. An HDLC packet is aborted when seven contiguous "1" bits (with no inserted "0" bits) are received. At least one flag byte must exist between HDLC packets for delineation. Contiguous flag bytes, or all ones bytes between packets are used as an "inter-frame time fill". Adjacent flag bytes may share zeros. Figure 1 - HDLC Frame Flag Information FCS Flag Flag HDLC Packet The CRC algorithm for the frame checking sequence (FCS) field is either a CRC-CCITT or CRC32 function. Figure 2 shows a CRC encoder block diagram using the generating polynomial g(X) = 1 + g1X + g2X2 +...+ gn-1Xn-1 + Xn. The CRC-CCITT FCS is two bytes in size and has a generating polynomial g(X) = 1 + X5 + X12 + X16. The CRC-32 FCS is four bytes in size and has a generating polynomial g(X) = 1 + X + X2 + X4 + X5 + X7 + X8 + X10 + X11 + X12 + X16 + X22 + X23 + X26 + X32. The first FCS bit received is the residue of the highest term. Figure 2 - CRC Generator g1 D0 g2 D1 LSB gn-1 D2 Message Dn-1 Parity Check Digits 33 MSB PM7366 FREEDM-8 DATA SHEET PMC-970930 9.2 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Receive Channel Assigner The Receive Channel Assigner block (RCAS) processes up to 8 serial links. Each link is independent and has its own associated clock. For each link, the RCAS performs a serial to parallel conversion to form data bytes. The data bytes are multiplexed, in byte serial format, for delivery to the Receive HDLC Processor / Partial Packet Buffer block (RHDL) at SYSCLK rate. In the event where multiple streams have accumulated a byte of data, multiplexing is performed on a fixed priority basis with link #0 having the highest priority and link #7 the lowest. Links containing a T1 or an E1 stream may be channelised. Data at each time-slot may be independently assigned to a different channel. The RCAS performs a table lookup to associate the link and time-slot identity with a channel. T1 and E1 framing bits/bytes are identified by observing the gap in the link clock which is squelched during the framing bits/bytes. For unchannelised links, clock rates are limited to 52 MHz on link #0 to #2 and limited to 10 MHz for the remaining links. All data on each link belongs to one channel. For the case of two unchannelised links, the maximum link rate is 52 MHz for SYSCLK at 33 MHz. For the case of more numerous unchannelised links or a mixture of channelise with unchannelised links, the total instantaneous link rate over all the links is limited to 64 MHz. The RCAS performs a table lookup using only the link number to determine the associated channel, as time-slots are non-existent in unchannelised links. The RCAS provides diagnostic loopback that is selectable on a per channel basis. When a channel is in diagnostic loopback, stream data on the received links originally destined for that channel is ignored. Transmit data of that channel is substituted in its place. 9.2.1 Line Interface There are 8 identical line interface blocks in the RCAS. Each line interface contains a bit counter, an 8-bit shift register and a holding register, that, together, perform serial to parallel conversion. Whenever the holding register is updated, a request for service is sent to the priority encoder block. When acknowledged by the priority encoder, the line interface would respond with the data residing in the holding register. To support channelised links, each line interface block contains a time-slot counter and a clock activity monitor. The time-slot counter is incremented each time the holding register is updated. The clock activity monitor is a counter that increments at the system clock (SYSCLK) rate and is cleared by a rising edge of the receive clock (RCLK[n]). A framing bit (T1) or framing byte (E1) is detected when the counter reaches a programmable threshold. In which case, the bit and timeslot counters are initialised to indicate that the next bit is the most significant bit of the first timeslot. For unchannelised links, the time-slot counter and the clock activity monitor are held reset. 9.2.2 Priority Encoder The priority encoder monitors the line interfaces for requests and synchronises them to the SYSCLK timing domain. Requests are serviced on a fixed priority scheme where highest to lowest priority is assigned from the line interface attached to RD[0] to that attached to RD[7]. 34 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Thus, simultaneous requests from RD[m] will be serviced ahead of RD[n], if m < n. When there are no pending requests, the priority encoder generates an idle cycle. In addition, once every fourth SYSCLK cycle, the priority encoder inserts a null cycle where no requests are serviced. This cycle is used by the channel assigner downstream for host microprocessor accesses to the provisioning RAMs. 9.2.3 Channel Assigner The channel assigner block determines the channel number of the data byte currently being processed. The block contains a 256 word channel provision RAM. The address of the RAM is constructed from concatenating the link number and the time-slot number of the current data byte. The fields of each RAM word include the channel number and a time-slot enable flag. The timeslot enable flag labels the current time-slot as belonging to the channel indicted by the channel number field. 9.2.4 Loopback Controller The loopback controller block implements the channel based diagnostic loopback function. Every valid data byte belonging to a channel with diagnostic loopback enabled from the Transmit HDLC Processor / Partial Packet Buffer block (THDL) is written into a 64 word FIFO. The loopback controller monitors for an idle time-slot or a time-slot carrying a channel with diagnostic loopback enabled. If either conditions hold, the current data byte is replaced by data retrieved from the loopback data FIFO. 9.3 Receive HDLC Processor / Partial Packet Buffer The Receive HDLC Processor / Partial Packet Buffer block (RHDL) processes up to 128 synchronous transmission HDLC data streams. Each channel can be individually configured to perform flag sequence detection, bit de-stuffing and CRC-CCITT or CRC-32 verification. The packet data is written into the partial packet buffer. At the end of a frame, packet status including CRC error, octet alignment error and maximum length violation are also loaded into the partial packet buffer. Alternatively, a channel can be provisioned as transparent, in which case, the HDLC data stream is passed to the partial packet buffer processor verbatim. There is a natural precedence in the alarms detectable on a receive packet. Once a packet exceeds the programmable maximum packet length, no further processing is performed on it. Thus, octet alignment detection, FCS verification and abort recognition are squelched on packets with a maximum length violation. An abort indication squelches octet alignment detection, minimum packet length violations, and FCS verification. In addition, FCS verification is only performed on packets that do not have octet alignment errors, in order to allow the RHDL to perform CRC calculations on a byte-basis. The partial packet buffer is an 8 Kbyte RAM that is divided into 16-byte blocks. Each block has an associated pointer which points to another block. A logical FIFO is created for each provisioned channel by programming the block pointers to form a circular linked list. A channel FIFO can be assigned a minimum of 3 blocks (48 bytes) and a maximum of 512 blocks (8 Kbytes). The depth 35 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER of the channel FIFOs are monitored in a round-robin fashion. Requests are made to the Receive DMA Controller block (RMAC) to transfer, to the PCI host memory, data in channel FIFOs with depths exceeding their associated threshold. 9.3.1 HDLC Processor The HDLC processor is a time-slice state machine which can process up to 128 independent channels. The state vector and provisioning information for each channel is stored in a RAM. Whenever new channel data arrives, the appropriate state vector is read from the RAM, processed and written back to the RAM. The HDLC state-machine can be configured to perform flag delineation, bit de-stuffing, CRC verification and length monitoring. The resulting HDLC data and status information is passed to the partial packet buffer processor to be stored in the appropriate channel FIFO buffer. The configuration of the HDLC processor is accessed using indirect channel read and write operations. When an indirect operation is performed, the information is accessed from RAM during a null clock cycle generated by the upstream Receive Channel Assigner block (RCAS). Writing new provisioning data to a channel resets the channel's entire state vector. 9.3.2 Partial Packet Buffer Processor The partial packet buffer processor controls the 8 Kbyte partial packet RAM which is divided into 16 byte blocks. A block pointer RAM is used to chain the partial packet blocks into circular channel FIFO buffers. Thus, non-contiguous sections of the RAM can be allocated in the partial packet buffer RAM to create a channel FIFO. System software is responsible for the assignment of blocks to individual channel FIFOs. Figure 3 shows an example of three blocks (blocks 1, 3, and 200) linked together to form a 48 byte channel FIFO. The partial packet buffer processor is divided into three sections: writer, reader and roamer. The writer is a time-sliced state machine which writes the HDLC data and status information from the HDLC processor into a channel FIFO in the packet buffer RAM. The reader transfers channel FIFO data from the packet buffer RAM to the downstream Receive DMA Controller block (RMAC). The roamer is a time-sliced state machine which tracks channel FIFO buffer depths and signals the reader to service a particular channel. If a buffer over-run occurs, the writer ends the current packet from the HDLC processor in the channel FIFO with an over-run flag and ignores the rest of the packet. 36 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 3 - Partial Packet Buffer Structure Partial Packet Buffer RAM Block Pointer RAM Block 0 16 bytes Block 0 XX Block 1 16 bytes Block 1 0x03 Block 2 16 bytes Block 2 XX Block 3 16 bytes Block 3 0xC8 Block 200 16 bytes Block 200 0x01 Block 511 16 bytes Block 511 XX The FIFO algorithm of the partial packet buffer processor is based on a programmable perchannel transfer size. Instead of tracking the number of full blocks in a channel FIFO, the processor tracks the number of transactions. Whenever the partial packet writer fills a transfersized number of blocks or writes an end-of-packet flag to the channel FIFO, a transaction is created. Whenever the partial packet reader transmits a transfer-size number of blocks or an endof-packet flag to the RMAC block, a transaction is deleted. Thus, small packets less than the transfer size will be naturally transferred to the RMAC block without having to precisely track the number of full blocks in the channel FIFO. The partial packet roamer performs the transaction accounting for all channel FIFOs. The roamer increments the transaction count when the writer signals a new transaction and sets a perchannel flag to indicate a non-zero transaction count. The roamer searches the flags in a roundrobin fashion to decide for which channel FIFO to request transfer by the RMAC block. The roamer informs the partial packet reader of the channel to process. The reader transfers the data to the RMAC until the channel transfer size is reached or an end of packet is detected. The reader then informs the roamer that a transaction is consumed. The roamer updates its transaction count and clears the non-zero transaction count flag if required. The roamer then services the next channel with its transaction flag set high. 37 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The writer and reader determine empty and full FIFO conditions using flags. Each block in the partial packet buffer has an associated flag. The writer sets the flag after the block is written and the reader clears the flag after the block is read. The flags are initialized (cleared) when the block pointers are written using indirect block writes. The writer declares a channel FIFO overrun whenever the writer tries to store data to a block with a set flag. In order to support optional removal of the FCS from the packet data, the writer does not declare a block as filled (set the block flag nor increment the transaction count) until the first double word of the next block in channel FIFO is filled. If the end of a packet resides in the first double word, the writer declares both blocks as full at the same time. When the reader finishes processing a transaction, it examines the first double word of the next block for the end-of-packet flag. If the first double word of the next block contains only FCS bytes, the reader would, optionally, process next transaction (end-of-packet) and consume the block, as it contains information not transferred to the RMAC block. 9.4 Receive DMA Controller The Receive DMA Controller block (RMAC) is a DMA controller which stores received packet data in host computer memory. The RMAC is not directly connected to the host memory PCI bus. Memory accesses are serviced by a downstream PCI controller block (GPIC). The RMAC and the host exchange information using receive packet descriptors (RPDs). The descriptor contains the size and location of buffers in host memory and the packet status information associated with the data in each buffer. RPDs are transferred from the RMAC to the host and vice versa using descriptor reference queues. The RMAC maintains all the pointers for the operation of the queues. The RMAC provides two receive packet descriptor reference (RPDR) free queues to support small and large buffers. The RMAC acquires free buffers by reading RPDRs from the free queues. After a packet is received, the RMAC places the associated RPDR onto a RPDR ready queue. To minimise host bus accesses, the RMAC maintains a descriptor reference table to store current DMA information. This table contains separate DMA information entries for up to 128 receive channels. 9.4.1 Data Structures For packet data, the RMAC communicates with the host using Receive Packet Descriptors (RPD), Receive Packet Descriptor References (RPDR), the Receive Packet Descriptor Reference Ready (RPDRR) queue and the Receive Packet Descriptor Reference Small and Large Buffer Free (RPDRF) queues. The RMAC copies packet data to data buffers in host memory. The RPD, RPDR, RPDRR queue, and Small and Large RPDRF queues are data structures which are used to transfer host memory data buffer information. All five data structures are manipulated by both the RMAC and the host computer. The RPD holds the data buffer size, data buffer address, and packet status information. The RPDR is a pointer which is used to index into a table of RPDs. The RPDRR queue and RPDRF queues allow the RMAC and the host to pass RPDRs back and forth. These data structures are described in more detail in the following sections. 38 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Receive Packet Descriptor The Receive Packet Descriptors (RPDs) pass buffer and packet information between the RMAC and the host. Both the RMAC and the host read and write information in the RPDs. The host writes RPD fields which describe the size and address of data buffers in host memory. The RMAC writes RPD fields which provide number of bytes used in each data buffer, RPD link information, and the status of the received packet. RPDs are stored in host memory in a Receive Packet Descriptor Table which is described in a later section. The Receive Packet Descriptor structure is shown in Figure 4. Figure 4 - Receive Packet Descriptor Bit 31 0 Data Buffer Start Address [31:0] Bytes In Buffer [15:0] Status [5:0] Reserved (18) Offset[1:0] CE RCC [6:0] Next RPD Pointer [13:0] Receive Buffer Size [15:0] Reserved (16) Table 8 - Receive Packet Descriptor Fields Field Description Data Buffer Start Address[31:0] The Data Buffer Start Address[31:0] bits point to the data buffer in host memory. This field is expected to be configured by the Host during initialisation. The Data Buffer Start Address field is valid in all RPDs. RCC[6:0] The Receive Channel Code (RCC[6:0]) bits are used by the RMAC to indicate which channel an RPD is associated with. For a linked list of RPDs, all the RPDs' RCC fields are valid, i.e. all contain the same channel value. CE The Chain End (CE) bit indicates the end of a linked list of RPDs. When CE is set to logic one, the current RPD is the last RPD of a linked list of RPDs. When CE is set to logic zero, the current RPD is not the last RPD of a linked list. The CE bit is valid for all RPDs written by the RMAC to the Receive Ready Queue. When a packet requires only one RPD, the CE bit is set to logic one. The CE bit is ignored for all RPDs read by the RMAC from the Receive Free Queues, each of which is assumed to point to only one buffer, i.e. not a chain. 39 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Field Description Offset[1:0] The Offset[1:0] bits indicate the byte offset of the data packet from the start of the buffer. If this value is non-zero, there will be `dummy' (i.e. undefined) bytes at the start of the data buffer prior to the packet data proper. For a linked list of RPDs, only the first RPD's Offset field is valid. All other RPD Offset fields of the linked list are set to 0. Status [5:0] The Status[5:0] bits indicate the status of the received packet. Status[0] Status[1] Status[2] Status[3] Status[4] Status[5] Rx buffer overrun Packet exceeds max. allowed size CRC error Packet Length not an exact no. of bytes HDLC abort detected Unused (set to 0) For a linked list of RPDs, only the last RPD's Status field is valid. All other RPD Status fields of the linked list are invalid and should be ignored. When a packet requires only one RPD, the Status field is valid. Bytes in Buffer [15:0] The Bytes in Buffer[15:0] bits indicate the number of bytes actually used in the current RPD's data buffer to store packet data. The count excludes the 'dummy' bytes inserted as a result of a non-zero Offset field. A count greater than 32767 bytes indicates a packet that is shorter than the expected length of the FCS field. The Bytes in Buffer field is invalid when Status[0] or Status[4] is asserted . Next RPD Pointer [13:0] The Next RPD Pointer[13:0] bits store a RPDR which enables the RMAC to support linked lists of RPDs. This field, which is only valid when CE is equal to logic zero, contains the RPDR to the next RPD in a linked list. The RMAC links RPDs when more than one buffer is needed to store a packet. The Next RPD Pointer is not valid for the last RPD in a linked list (when CE=1). When a packet requires only one RPD, the Next RPD Pointer field is not valid. Receive Buffer Size [15:0] The Receive Buffer Size[15:0] bits indicate the size in bytes of the current RPD's data buffer. This field is expected to be configured by the Host during initialisation. The Receive Buffer Size must be a nonzero integer multiple of 16 and less than or equal to 32752. The Receive Buffer Size field is valid in all RPDs. 40 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The Receive Buffer Size and Data Buffer Start Address fields are written only by the host. The RMAC reads these fields to determine where to store packet data. All other fields are written only by the RMAC. Receive Packet Descriptor Table The Receive Packet Descriptor Table resides in host memory and stores all the RPDs. The RPD Table can contain a maximum of 16384 RPDs. The base of the RPD table is user programmable using the Rx Packet Descriptor Table Base (RPDTB) register. The table is indexed by a Receive Packet Descriptor Reference (RPDR) which is a 14-bit pointer defining the offset of a RPD from the table base. Thus, as shown in the following diagram, a RPD can be located by adding the RPDR to the Rx Packet Descriptor Table Base register. 41 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 5 - Receive Packet Descriptor Table RPDTB[31:4] = Rx Packet Descriptor Table Base register RPDR[13:0] = Receive Packet Desriptor Reference RPD_ADDR[31:0] = Receive Packet Descriptor Address Bit 31 Bit 0 RPDTB[31:4] 0000 + RPDR[13:0] 0000 = RPD_ADDR[31:0] Bit 31 RPDTB Bit 0 Dword 0 Dword 1 Dword 2 Dword 3 Dword 0 RPD 1 RPD_ADDR RPD 2 Dword 3 Dword 0 RPD 16384 Dword 3 The Receive Packet Descriptor Table resides in host memory. The Rx Packet Descriptor Table Base register resides in the RMAC; this register is initialised by the host. The RPDRs reside in host memory and are accessed using receive packet queues which are described in the next section. 42 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Receive Packet Queues Receive Packet Queues are used to transfer RPDRs between the host and the RMAC. There are three queues: a RPDR Large Buffer Free Queue (RPDRLFQ), a RPDR Small Buffer Free Queue (RPDRSFQ) and a RPDR Ready Queue (RPDRRQ). The free queues contain RPDRs referencing RPDs that define free buffers. The ready queue contains RPDRs referencing RPDs that define buffers ready for host processing. The RMAC pulls RPDRs from the free queues when it needs free data buffers. The RMAC places an RPDR onto the ready queue after it has filled the buffers with data from each complete packet. The host removes RPDRs from the ready queue to process the data buffers. The host places the RPDRs back onto the free queues after it finishes reading the data from the buffers. When starting to process a packet, the RMAC uses a small buffer RPD to store the packet data. If the packet requires more than one buffer, the RMAC uses large buffer RPDs to store the remainder of the packet. The RMAC links together all the RPDs required to store the packet and returns the RPDR associated with the first RPD onto the ready queue. All receive packet queues reside in host memory and are defined by the Rx Queue Base (RQB) register and index registers which reside in the RMAC. The Rx Queue Base is the base address for the receive packet queues. Each packet queue has four index registers which define the start and end of the queue and the read and write locations of the queue. Each index register is 16 bits in length and defines an offset from the Rx Queue Base. Thus, as shown in the Figure 6, the host address of a RPDR is calculated by adding the index register to the Rx Queue Base register. The host initialises the Rx Queue Base and all the index registers. When an entity (either the RMAC or the host) removes elements from a queue, the entity updates the read pointer for that queue. When an entity (either the RMAC or the host) places elements onto a queue, the entity updates the write pointer for that queue. The read index for each queue points to the last valid RPDR read while the write index points to where the next RPDR can be written. The start index points to the first valid location within the queue; an RPDR can be written to this location. However, the end index points to a location that is beyond a queue; an RPDR can not be written to this location. Note however, the start index of one queue can be set to the end index of another queue. A queue is empty when the read index is one less than the write index; a queue is also empty if the read index is one less than the end index and the write index equals the start index. A queue is full when the read index is equal to the write index. Figure 6 shows the RPDR reference queues. 43 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 6 - RPDRF and RPDRR Queues Receive Packet Descriptor (RPD) Reference Queues Base Address: RQB[31:2] = Rx Queue Base register Index Registers: Large Buffer Free Queue: Small Buffer Free Queue: RPDRLFQS[15:0] = RPDRLFQW[15:0] = RPDRLFQR[15:0] = RPDRLFQE[15:0] = RPDRSFQS[15:0] RPDRSFQW[15:0] RPDRSFQR[15:0] RPDRSFQE[15:0] RPDR Large Free Queue Start register RPDR Large Free Queue Write register RPDR Large Free Queue Read register RPDR Large Free Queue End register = = = = RPDR Small Free Queue Start register RPDR Small Free Queue Write register RPDR Small Free Queue Read register RPDR Small Free Queue End register Ready Queue: RPDRRQS[15:0] RPDRRQW[15:0] RPDRRQR[15:0] RPDRRQE[15:0] = = = = RPDR Ready Queue Start register RPDR Ready Queue Write register RPDR Ready Queue Read register RPDR Ready Queue End register Base Address + Index Register ------------------------Host Address RQB[31:2] + Index[15:0] 00 00 AD[31:0] Rx Packet Descriptor Reference Queue Memory Bit 31 RPDRRQS RPDRRQR Bit 0 Status + RPDR Status + RPDR Status + RPDR Host Memory Status + RPDR RPDRRQW Status + RPDR Status + RPDR RPDRRQE RQB RPDRLFQS RPDRLFQR RPDR RPD Reference Queues RPDR RPDR RPDR RPDRLFQW RPDR RPDR RPDRLFQE RPDRSFQS RPDRSFQR RPDR RPDR RPDR Valid RPDR RPDRSFQW RPDR RPDR RPDRSFQE RPDR 44 256KB PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Note that the maximum value to which an end pointer may be set is FFFF hex, resulting in a maximum offset from the queue base address of (4*(FFFF-1)) = 3FFF8 hex. An end pointer must not be set to 0 hex in an attempt to include offset 3FFFC hex in a queue. As shown in Figure 6, the ready queue elements have a status field as well as an RPDR field. The RMAC fills in the status field to mark whether a packet was successfully received or not. The host reads the status field. The ready queue element is shown in Table 9 below along with the definition of the status bits. If the RMAC requires a buffer of a particular size (i.e. small or large) and no RPDR is available in the corresponding free queue, a RPDR from the other free queue is substituted. The host may, therefore, force the RMAC to store received data in buffers of only one size by setting one of the free queues to zero length, i.e. by setting the start and end index registers of one of the queues to equal values. If the RMAC requires a buffer and neither free queue contains RPDRs, an RPQ_ERRI interrupt is generated. Table 9 - RPDRR Queue Element Bit 15 Bit 0 STATUS[1:0] RPDR[13:0] Field Description STATUS[1:0] The encoding for the status field is as follows: 00 - Successful reception of packet. 01 - Unsuccessful reception of packet. 10 - Unprovisioned partial packet. 11 - Reserved. RPDR[13:0] The RPDR[13:0] field defines the offset of the first RPD in a linked chain of RPDs, each pointing to a buffer containing the received data. As described previously, the RMAC links a large buffer RPD to a small buffer RPD if more than one buffer is needed for a packet. The RMAC links additional large buffer RPDs to the end of the chain as required until the entire packet is copied to host memory (provided that the host has not disabled use of both free queues by setting one of them to length zero). After storing the packet data, the RMAC places the STATUS+RPDR for the first RPD onto the ready queue. Only the RPDR associated with the first RPD is placed onto the ready queue. All other required RPDs are linked to the first RPD as shown in Figure 7. Although a STATUS+RPDR only totals to 16 bits, each queue entry is a dword, i.e. 32 bits. When the RMAC block writes a STATUS+RPDR to the ready queue, it sets the third byte to 0 and the fourth (most significant) byte is unmodified. 45 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 7 - RPDRR Queue Operation Rx Packet Descriptor Reference Ready Queue RPDRRQ_START_ADDR Bit 31 Bit 0 buffer -packet M RPDRRQ_READ_ADDR RPD - 16 bytes STATUS + RPDR STATUS + RPDR RPDRRQ_WRITE_ADDR RPD - 16 bytes STATUS + RPDR RPD - 16 bytes buffer -packet N buffer -start of packet O RPD - 16 bytes buffer -middle of packet O RPD - 16 bytes buffer -end of packet O RPDRRQ_END_ADDR Receive Channel Descriptor Reference Table On a per-channel basis, the RMAC caches information such as the current DMA information in a Receive Channel Descriptor Reference (RCDR) Table. The RMAC can process 128 channels and stores three dwords of information per channel. This information is cached internally in order to decrease the number of host bus accesses required to process each data packet. The structure of the RCDR table is shown in Figure 8. 46 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 8 - Receive Channel Descriptor Reference Table Bit 31 RCC 0 RCC 1 RCC 127 Bit 0 Bytes Available in Buffer[15:0] RBC[1:0] RPD Pointer[13:0] Buffer Size[15:0] Res V Start RPD Pointer[13:0] DMA Current Address[31:0] Bytes Available in Buffer[15:0] RBC[1:0] RPD Pointer[13:0] Buffer Size[15:0] Res V Start RPD Pointer[13:0] DMA Current Address[31:0] Bytes Available in Buffer[15:0] RBC[1:0] RPD Pointer[13:0] Buffer Size[15:0] Res V Start RPD Pointer[13:0] DMA Current Address[31:0] Table 10 - Receive Channel Descriptor Reference Table Fields Field Description Bytes Available in Buffer[15:0] This field is used to keep track of the number of bytes available in the current data buffer. The RMAC initialises the Bytes Available in Buffer to the Receive Buffer Size minus the offset at the head of the buffer. The field is decremented each time a byte is written into the buffer. RBC[1:0] This field is used to keep track of the number of buffers used when storing `raw' (i.e. non packet delimited) data. The RMAC initialises the RBC field to the value of the RAWMAX[1:0] field in the RMAC Control Register. The field is decremented each time a buffer is filled with data. If the field reaches zero, the chain of RPDs is placed on the ready queue and a new chain started. RPD Pointer[13:0] This field contains the pointer to the current RPD. Buffer Size[15:0] This field contains the size in bytes of the buffer currently being written to. 47 PM7366 FREEDM-8 DATA SHEET PMC-970930 9.4.2 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Field Description V This bit (Valid) indicates whether a packet is currently being received on the DMA channel. When the V bit is set to 1, the other fields in the RCDR table entry for the DMA channel contain valid information. Start RPD Pointer[13:0] This field contains the pointer to the first RPD for the packet being received. DMA Current Address[31:0] The DMA Current Address [31:0] bits holds the host address of the next dword in the current buffer. The RMAC increments this field on each access to the buffer. DMA Transaction Controller The DMA Transaction Controller coordinates the reception of data packets from the Receive Packet Interface and their subsequent storage in host memory. A packet may be received over a number of separate transactions, interleaved with transactions belonging to other DMA channels. As well as sending the received data to host memory, the DMA Transaction Controller initiates data transactions of its own for the purposes of maintaining the data structures (queues, descriptors, etc.) in host memory. 9.4.3 Write Data Pipeline/Mux The Write Data Pipeline/Mux performs two functions. First, it pipelines receive data between the RHDL block and the GPIC block, inserting enough delay to enable the DMA Transaction Controller to generate appropriate control signals at the GPIC interface. Second, it provides a multiplexor to the data out lines on the GPIC interface, allowing the DMA Transaction Controller to output data relating to the transactions the controller itself initiates. 9.4.4 Descriptor Information Cache The Descriptor Information Cache provides the storage for the Receive Channel Descriptor Reference (RCDR) Table described above (Figure 8). 9.4.5 Free Queue Cache The Free Queue Cache block implements the 6 element RPDR Small Buffer Free Queue cache and the 6 element RPDR Large Buffer Free Queue cache. These caches are used to store free small buffer and large buffer RPDRs. Caching RPDRs reduces the number of host bus accesses that the RMAC makes. Each cache is managed independently. The elements of the cache are consumed one at a time as they are needed by the RMAC. The RPDR small buffer cache is reloaded when it is empty and the RMAC requires a new small buffer RPDR. The large buffer RPDR cache is reloaded when it is 48 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER empty and the RMAC requires a new large buffer RPDR. When reloading either of the caches, the appropriate cache controller will read up to six new elements. The cache controller may read fewer than six elements if there are fewer than six new elements available, or the read pointer index is within six elements of the end of the free queue. If the read pointer is near the end of the free queue, the cache controller reads only to the end of the queue and does not start reading from the top of the queue until the next time a reload is required. To do so would require two host memory transactions and would be of no benefit. 9.5 PCI Controller The General-Purpose Peripheral Component Interconnect Controller block (GPIC) provides a 32bit Master and Target interface core which contains all the required control functions for Peripheral Component Interconnect (PCI) Bus Revision 2.1 interfacing. Communications between the PCI bus and other FREEDM-8 blocks can be made through either an internal asynchronous16-bit bus or through one of two synchronous FIFO interfaces. One of the FIFO interfaces is dedicated to servicing the Receive DMA Controller block (RMAC) and the other to the Transmit DMA Controller block (TMAC). The GPIC supports a 32-bit PCI bus operating at up to 33 MHz and bridges between the timing domain of the DMA controllers (SYSCLK) and the timing domain of the PCI bus (PCICLK). By itself, the GPIC does not generate any PCI bus accesses. All transactions on the bus are initiated by another PCI bus master or by the core device. The GPIC transforms each access to and from the PCI bus to the intended target or initiator in the core device. Except for the configuration space registers and parity generating/checking, the GPIC performs no operations on the data. The GPIC is made up of four sections: master state machine, a target state machine, internal microprocessor bus interface and error/bus controller. The target and master blocks operate independent of each other. The error/bus control block monitors the control signals from the target and master blocks to determine the state of the PCI I/O pads. This block also generates and/or checks parity for all data going to or coming from the PCI bus. The internal microprocessor bus interface block contains configuration and status registers together with the production test logic for the GPIC block. 9.5.1 Master Machine The GPIC master machine translates requests from the RMAC and TMAC block interfaces into PCI bus transactions. The GPIC initiates four types of PCI cycles: memory read (burst or single), memory read multiple, memory read line and memory write (burst or single). The number of data transfers in any cycle is controlled by the DMA controllers. The maximum burst size is determined by the particular data path. A read cycle to the RMAC is restricted to a maximum burst size of 8 dwords and a write cycle is limited to a maximum of 32. The TMAC interface has a limit of 32 dwords on a read cycle and 8 on a write cycle. In response to a DMA controller requesting a cycle, the GPIC must arbitrate for control of the PCI bus. Before asserting the PCI Request line, the GPIC first does an internal arbitration to determine the priority of service in the event that both the RMAC and TMAC are requesting 49 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER service. The GMAC arbitrates between the RMAC and TMAC on a "first-request-first-serve" basis. If the RMAC and TMAC request service simultaneously, the RMAC will receive priority. When the RMAC finishes the transaction, the bus will be arbitrated to the TMAC. It is possible for all four FIFOs (RMAC read, TMAC read, RMAC write, TMAC write) to request service simultaneously. When an external PCI bus arbitrator issues a Grant in response to the Request from the GPIC, the master state machine monitors the PCI bus to insure that the previous master has completed its transaction and has released the bus before beginning the cycle. Once the GPIC has control of the bus, it will assert the FRAME signal and drive the bus with the address and command. The value for the address is provided by the selected DMA controller. After the initial data transfer, the GPIC tracks the address for all remaining transfers in the burst internally in case the GPIC is disconnected by the target and must retry the transaction. The target of the GPIC master burst cycle has the option of stopping or disconnecting the burst at any point. In the event of a target disconnect the GPIC will terminate the present cycle and release the PCI bus. If the GPIC is asserting the REQUEST line at the time of the disconnect, it will remove the REQUEST for two PCI clock cycles then reassert it. When the PCI bus arbitrator returns the GRANT, the GPIC will restart the burst access at the next address and continue until the burst is completed or repeat the sequence if the target disconnects again. During burst reads, the GPIC accepts the data without inserting any wait states. Data is written directly into the read FIFO where the RMAC or TMAC can remove it at its own rate. During burst writes, the GPIC will output the data without inserting any wait states, but may terminate the transaction early if the local master fails to fill the write FIFO with data before the GPIC requires it. (If a write transaction is terminated early due to data starvation, the GPIC will automatically initiate a further transaction to write the remaining data when it becomes available.) Normally, the GPIC will begin requesting the PCI bus for a write transaction shortly after data starts to be loaded into the write FIFO by the RMAC or TMAC. The RMAC, however, is not required to supply a transaction length when writing packet data and in addition, may insert pauses during the transfer. In the case of packet data writes by the RMAC, the GPIC will hold off requesting the PCI bus until the write FIFO has filled up with a number of dwords equal to a programmable threshold. If the FIFO empties without reaching the end of the transition, the GPIC will terminate the current transaction and restart a new transaction to transfer any remaining data when the RMAC signals an end of transaction. Beginning the PCI transaction before all the data is in the write FIFO allows the GPIC to reduce the impact of the bus latency on the core device. Each master PCI cycle generated by the GPIC can be terminated in three ways: Completion, Timeout or Master Abort. The normal mode of operation of the GPIC is to terminate after transferring all the data from the master FIFO selected. As noted above this may involve multiple PCI accesses because of the inability of the target to accept the full burst or data starvation during writes. After the completion of the burst transfer the GPIC will release the bus unless another FIFO is requesting service, in which case if the GRANT is asserted the GPIC will insert one idle cycle on the bus and then start a new transfer. The maximum duration of the a master burst cycle is controlled by the value set in the LATENCY TIMER register in the GPIC Configuration Register block. This value is set by the host on boot 50 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER and is loaded into a counter in the GPIC master state at the start of each access. If the counter reaches zero and the GRANT signal has been removed the GPIC will release the bus regardless of whether it has completed the present burst cycle. This type of termination is referred to as a Master Time-out. In the case of a Master Time-out the GPIC will remove the REQUEST signal for two PCI clocks and then reassert it to complete the burst cycle. If no target responds to the address placed on the bus by the GPIC after 4 PCI clocks the GPIC will terminate the cycle and flag the cycle in the PCI Command/ Status Configuration Register as a Master Abort. If the Stop on Error enable (SOE_E) bit is set in the GPIC Command Register, the GPIC will not process any more requests until the error condition is cleared. If the SOE_E is not set, the GPIC will discard the REQUEST and indicate to the local master that the cycle is complete. This action will result in any write data being lost and any read data being erroneous. 9.5.2 Master Local Bus Interface The master local bus is a 32 bit data bus which connects the local master device to the GPIC. The GPIC contains two local master interface blocks, with one supporting the RMAC and the other the TMAC. Each local master interface has been optimised to support the traffic pattern generated by the RMAC or the TMAC and are not interchangeable. The data path between the GPIC and local master device provides a mechanism to segregate the system timing domain of the core from the PCI bus. Transfers on each of the RMAC and TMAC interfaces are timed to its own system clock. The DMA controllers isolated from all aspects of the PCI bus protocol, and instead "sees" a simple synchronous protocol. Read or write cycles on the local master bus will initiate a request for service to the GPIC which will then transfer the data via the PCI bus. The GPIC maximises data throughput between the PCI bus and the local device by paralleling local bus data transfers with PCI access latency. The GPIC allows either DMA controller to write data independent of each other and independent of PCI bus control. The GPIC temporarily buffers the data from each DMA controller while it is arbitrating for control of the PCI bus. After completion of a write transfer, the DMA controller is then released to perform other tasks. The GPIC can buffer only a single transaction from each DMA controller. Read accesses on the local bus are optimised by allowing the DMA controllers access to the data from the PCI bus as soon as the first data becomes available. After the initial synchronisation and PCI bus latency data is transferred at the slower of PCI bus rate or the core logic SYSCLK rate. Once a read transaction is started, the DMA controller is held waiting for the ready signal while the GPIC is arbitrating for the PCI bus. All data is passed between the GPIC and the DMA controllers in little Endian format and, in the default mode of operation, the GPIC expects all data on the PCI bus to also be in little Endian format. The GPIC provides a selection bit in the internal Control register which allows the Endian format of the PCI bus data to be changed. If enabled, the GPIC will swizzle all packet data on the PCI bus (but not descriptor references and the contents of descriptors). The swizzling is performed according to the "byte address invariance" rule, i.e. the only change to the data is the mirror-imaging of byte lanes. 51 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The interface for the RMAC provides for byte addressability of write transactions whereas the interface for the TMAC provides for byte addressability of read transactions. Other transactions must be dword aligned. For byte-addressable transactions, the data transferred between the local device and the GPIC need not be dword aligned with the data as it is presented on the PCI bus. The GPIC will perform any byte-realignment required. In order to complete a transfer involving byte re-alignment, the GPIC may need to add an extra burst cycle to the PCI transaction. 9.5.3 Target Machine The GPIC target machine performs all the required functions of a stand alone PCI target device. The target block performs three main functions. The first is the target state machine which controls the protocol of PCI target accesses to the GPIC. The second function is to provide all PCI Configuration registers. Last, the target block provides a Target Interface to the CBI registers in the other FREEDM-8 blocks. The GPIC tracks the PCI bus and decodes all addresses and commands placed on the bus to determine whether to respond to the access. The GPIC responds to the following types of PCI bus commands only: Configuration read and write, memory read and write, memory-read-multiple and memory-read-line which are aliased to memory read and memory-write-and-invalidate which is aliased to memory write. The GPIC will ignore any access that falls within the address range but has any other command type. After accepting a target access as a medium speed device, the FREEDM inserts one wait state for a configuration read/write and five wait states for other command types before completing the transaction by asserting TRDYB. Burst accesses to the GPIC are accepted provided they are of linear type. If a master makes a memory access to the GPIC with the lower two address bits set to any value but "00" (linear burst type) the GPIC ignores the cycle. Burst accesses of any length are accepted, but the FREEDM will disconnect if the master inserts any wait states during the transaction. The FREEDM will also disconnect on every read and write access to configuration space after transferring one Dword of data. Figure 9 illustrates the GPIC address space. 52 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 9 - GPIC Address Map PCI ADDRESS MAP 0B CBI Registers Base Address CBI Registers 4KB 4GB The GPIC responds with medium timing to master accesses. (I.e. DEVSELB is asserted 2 PCICLK cycles after FRAMEB asserted) It inserts five wait states on reads to the internal CBI register space (six wait states for the 2nd and subsequent dwords of a burst read). The target machine will only terminate an access with a Retry if the target is locked and another master tries to access the GPIC. The GPIC will terminate any access to a non-burst area with a Disconnect and always with data transferred. The target does not support delayed transactions. The GPIC will perform a Target-Abort termination only in the case of an address parity error in an address that the GPIC claims. 53 PM7366 FREEDM-8 DATA SHEET PMC-970930 9.5.4 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CBI Bus Interface The CBI bus interface provides access to the CBI address space of the FREEDM-8 blocks. The CBI address space is set by the associated BAR in the PCI Configuration registers. Write transfers to the CBI space always write all 32 bits provided that at least one byte enable is asserted. A write command with all byte enables negated will be ignored. Read transfers always return the 32 bits regardless of the status of the byte enables, as long as at least one byte enable is asserted. A read command with all byte enables negated will be ignored. 9.5.5 Error / Bus Control The Error/Bus Control block monitors signals from both the Target block and Master Block to determine the direction of the PCI bus pads and to generate or check parity. After reset, the GPIC sets all bi-directional PCI bus pads to inputs and monitors the bus for accesses. The Error/Bus control unit remains in this state unless either the Master requests the PCI bus or the Target responds to a PCI Master Access. The Error/Bus control unit decodes the state of each state machine to determine the direction of each PCI bus signal. All PCI bus devices are required to check and generate even parity across AD[31:0] and C/BEB[3:0] signals. The GPIC generates parity on Master address and write data phases; the target generates parity on read data phases. The GPIC is required to check parity on all PCI bus phases even if it is not participating in the cycle. But, the GPIC will report parity errors only if the GPIC is involved in the PCI cycle or if the GPIC detects an address parity error or data parity is detected in a PCI special cycle. The GPIC updates the PCI Configuration Status register for all detected error conditions. 9.6 Transmit DMA Controller The Transmit DMA Controller block (TMAC) is a DMA controller which retrieves packet data from host computer memory for transmission. The minimum packet data length is two bytes. The TMAC communicates with the host computer bus through the master interface connected to PCI Controller block (GPIC) which translates host bus specific signals from the host to the master interface format. The TMAC uses the master interface whenever it wishes to initiate a host bus read or write; in this case, the TMAC is the initiator and the host memory is the target. The TMAC and the host exchange information using transmit descriptors (TDs). The descriptor contains the size and location of buffers in host memory and the packet status information associated with the data in each buffer. TDs are transferred from the TMAC to the host and vice versa using descriptor reference queues. The TMAC maintains all the pointers for the operation of the queues. The TMAC acquires buffers with data ready for transmission by reading TDRs from a TDR ready queue. After a packet has been transmitted, the TMAC places the associated TDR onto a TDR free queue. To minimise host bus accesses, the TMAC maintains a descriptor reference table to store current DMA information. This table contains separate DMA information entries for up to 128 transmit 54 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER channels. The TMAC also performs per-channel sorting of packets received in the TDR ready queue to eliminate head-of-line blocking. 9.6.1 Data Structures The TMAC communicates with the host using Transmit Descriptors (TD), Transmit Descriptor References (TDR), the Transmit Data Reference Ready (TDRR) queue and the Transmit Data Reference Free (TDRF) queue. The TMAC reads packet data from data buffers in host memory. The TD, TDR, TDRR queue, and TDRF queue are data structures which are used to transfer host memory data buffer information. All four data structures are manipulated by both the TMAC and the host computer. The TD holds the data buffer size, data buffer address, and other packet information. The TDR is a pointer which is used to index into a table of TDs. The TDRR queue and TDRF queue allow the TMAC and the host to pass TDRs back and forth. These data structures are described in more detail in the following sections. Transmit Descriptor The Transmit Descriptors (TDs) pass buffer and packet information between the TMAC and the host. Both the TMAC and the host read and write information in the TDs. TDs are stored in host memory in a Transmit Descriptor Table. The Transmit Descriptor structure is shown in Figure 10. Figure 10 - Transmit Descriptor Bit 31 Bit 0 Data Buffer Start Address [31:0] Bytes In Buffer [15:0] Res(2) Reserved (5) TMAC Next TD Pointer [13:0] ABT IOC Reserved (16) P V M CE TCC[6:0] Host Next TD Pointer [13:0] Transmit Buffer Size [15:0] Table 11 - Transmit Descriptor Fields Field Description Data Buffer Start Address [31:0] The Data Buffer Start Address[31:0] bits point to the data buffer in host memory. The Data Buffer Start Address field is valid in all TDs Bytes In Buffer [15:0] The Bytes In Buffer[15:0] field is used by the host to indicate the total number of bytes to be transmitted in the current TD. Zero length buffers are illegal. 55 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Field Description P The Priority bit is set by the host to indicate the priority of the associated packet in a two level quality of service scheme. Packets with its P bit set high are queued in the high priority queue in the TMAC. Packets with the P bit set low are queued in the low priority queue. Packets in the low priority queue will not begin transmission until the high priority queue is empty. V The V bit is used to indicate that the TMAC Next TD Pointer field is valid. When set to logic 1, the TMAC Next TD Pointer[13:0] field is valid. When V is set to logic 0, the TMAC Next TD Pointer[13:0] field is invalid. The V bit is used by the host to reclaim data buffers in the event that data presented to the TMAC is returned to the host due to a channel becoming unprovisioned. The V bit is expected to be initialised to logic 0 by the host. M The More (M) bit is used by the host to support packets that require multiple TDs. If M is set to logic 1, the current TD is just one of several TDs for the current packet. If M is set to logic 0, this TD either describes the entire packet (in the single TD packet case) or describes the end of a packet (in the multiple TD packet case). Note: When M is set to logic 1, the only valid value for CE is logic 0. CE The Chain End (CE) bit is used by the host to indicate the end of a linked list of TDs presented to the TMAC. The linked list can contain one or more packets as delineated by the M bit (see above). When CE is set to logic 1, the current TD is the last TD of a linked list of TDs. When CE is set to logic 0, the current TD is not the last TD of a linked list. When the current TD is not the last of the linked list, the Host Next TD Pointer[13:0] field is valid, otherwise the field is not valid. Note: When CE is set to logic 1, the only valid value for M is logic 0. Note: When presenting raw (i.e. unpacketised) data for transmission, the host should code the M and CE bits as for a single packet chain, i.e. M=1, CE=0 for all TDs except the last in the chain and M=0, CE=1 for the last TD in the chain. TCC[6:0] The Transmit Channel Code (TCC[6:0]) field is used by the host to indicate with which channel a TD is associated. All TD in a chain must be associated with the same channel, i.e. have this field set to the same value. 56 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Field Description TMAC Next TD Pointer [13:0] The TMAC Next TD Pointer[13:0] bits are used to store TDRs which permits the TMAC to create linked lists of TDs passed to it via the TDRR queue. The TDs are linked with other TDs belonging to the same channel and same priority level. In the case that data presented to the TMAC is returned to the host due to a channel becoming unprovisioned, a TDR pointing to the start of the per-channel linked list of TDs is placed on the TDRF queue. It is the responsibility of the host to follow the TMAC and host links in order to recover all the buffers. ABT The Abort (ABT) bit is used by the host to abort the transmission of a packet. When ABT is set to logic 1, the packet will be aborted after all the data in the buffer has been transmitted. If ABT is set to logic 1 in the current TD, the M bit must be set low and the CE bit must be set to high.. IOC The Interrupt On Complete (IOC) bit is used by the host to instruct the TMAC to interrupt the host when the current TD's data buffer has been read. When IOC is logic 1, the TMAC asserts the IOCI interrupt when the data buffer has been read. Additionally, the Free Queue FIFO will be flushed. If IOC is logic zero, the TMAC will not generate an interrupt and the Free Queue FIFO will operate normally. Host Next TD Pointer [13:0] The Host Next TD Pointer[13:0] bits are used to store TDRs which permits the host to support linked lists of TDs. As described above, linked lists of TDs are terminated by setting the CE bit to logic 1. Linked lists of TDs are used by the host to pass multiple TD packets or multiple packets associated with the same channel and priority level to the TMAC. Transmit Buffer Size [15:0] The Transmit Buffer Size[15:0] field is used to indicate the size in bytes of the current TD's data buffer. (N.B. The TMAC does not make use of this field.) Transmit Descriptor Table The Transmit Descriptor Table, which resides in host memory, contains all of the Transmit Descriptors referenced by the TMAC. To access a TD, the TMAC takes a TDR from a TDRR queue or from the TCDR table and adds 16 times its value (because each TD is 16 bytes in size) to the Transmit Descriptor Table Base (TDTB) pointer to form the actual address of the TD in host memory. Each TD must reside in the Transmit Descriptor Table. The Transmit Descriptor Table can contain a maximum of 16384 TDs. The base of the Transmit Descriptor Table is user programmable using the TMAC Tx Descriptor Table Base register. Thus, as shown below, each TD can be located using a Transmit Descriptor Reference (TDR) combined with the TMAC Tx Descriptor Table Base register. 57 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 11 - Transmit Descriptor Table TDTB[31:4] = Tx Descriptor Table Base register TDR[13:0] = Transmit Descriptor Reference TD_ADDR[31:0] = Transmit Descriptor Address Bit 31 Bit 0 TDTB[31:4] 0000 + TDR[13:0] 0000 = TD_ADDR[31:0] Bit 31 Bit 0 TDTB Dword 0 Dword 1 Dword 2 Dword 3 Dword 0 TD1 TD_ADDR TD2 Dword 3 Dword 0 TD 16384 Dword 3 Transmit Queues Pointers to the transmit descriptors (TDs) containing packet(s) ready for transmission are passed from the host to the TMAC using the Transmit Descriptor Reference Ready (TDRR) queue, which resides in host memory. Pointers to transmit descriptor structures whose buffers have been read by the TMAC are passed from the TMAC to the host using the Transmit Descriptor Reference Free (TDRF) queue, which also resides in host memory. The TMAC contains a Free Queue cache which can store up to six TDRs. If caching is enabled, free TDRs are written into the TDRF queue six at a time, to reduce the number of host memory accesses. The Free Queue cache is also 58 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER flushed to the TDRF queue if the Interrupt On Completion (IOC) bit is set in the TD, which sends the corresponding TDR directly to the TDRF queue. The queues, shown in Figure 12 are defined by a common base pointer residing in the Transmit Queue Base register and eight offset pointers, four per queue. For each queue, two pointers define the start and the end of the queue, and two pointers keep track of the current read and write locations within the queue. The read pointer for each queue points to the offset of the last valid TDR read, and the write pointer points to the offset where next TDR can be written. The end of a queue is not a valid location for a TDR to be read or written. A queue is empty when the read pointer is one less than the write pointer or if the read pointer is one less than the end pointer and the write pointer equals the start pointer. A queue is full when the read pointer is equal to the write pointer. Each queue element is 32 bits in size, but only the 17 least significant bits are valid. The 17 least significant bits consist of a 14-bit TDR and three status bits. The status bits are used by the TMAC to inform the host of the success or failure of transmission (see Table 12). When the TMAC writes TDRs to the TDRF queue, it sets bits [23:17] of the queue element to 0. Once a TDR is placed on the TDRF queue, the FREEDM-8 will make no further accesses to the TD nor the associated buffer. Note that the maximum value to which an end pointer may be set is FFFF hex, resulting in a maximum offset from the queue base address of (4*(FFFF-1)) = 3FFF8 hex. An end pointer must not be set to 0 hex in an attempt to include offset 3FFFC hex in a queue. 59 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 12 - TDRR and TDRF Queues Transmit Descriptor Referance Queues Base Address: TQB[31:2] = Tx Queue Base register Index Registers: Ready: TDRRQS[15:0] = TDRRQW[15:0] = TDRRQR[15:0] = TDRRQE[15:0] = TDR Ready Queue Start register TDR Ready Queue Write register TDR Ready Queue Read register TDR Ready Queue End register Base Address + Index Register ------------------------PCI Address Free: TDRFQS[15:0] = TDRFQW[15:0] = TDRFQR[15:0] = TDRFQE[15:0] = TDR Free Queue Start register TDR Free Queue Write register TDR Free Queue Read register TDR Free Queue End register TQB[31:2] + 00 Index[15:0] 00 AD[31:0] Tx Descriptor Reference Queue Memory Map TDRFQS TDRFQR Bit 31 Bit 0 Status + TDR PCI Host Memory Status + TDR Status + TDR Status + TDR TDRFQW TQB Status + TDR TDR Reference Queues Status + TDR TDRFQE TDRRQS TDRRQR TDR TDR TDR TDR TDRRQW TDRRQE TDR TDR Valid TDR. Only least significant 17 bits are valid. 60 256KB PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 12 - Transmit Descriptor Reference Bit 16 Bit 0 STATUS[2:0] TDR[13:0] Field Description Status[2:0] The TMAC fills in the Status field to indicate to the host the results of processing the TD. The encoding is: TDR[13:0] Status[1:0] Description 00 Last or only buffer of packet, buffer read. 01 Buffer of partial packet, buffer read. 10 Unprovisioned channel, buffer not read. 11 Malformed packet (e.g. Bytes In Buffer field set to 0), buffer not read. Status[2] Description 0 No underflow detected. 1 Underflow detected. The TDR[13:0] field contains the offset of the TD returned. If a TDR is returned to the host with the status field set to "10" (unprovisioned channel), the TDR may point to a binary tree of TDs and buffers (as indicated by the CE and V bits in the TDs). It is the responsibility of the host to traverse the tree to reclaim all the buffers. If a TDR is returned to the host with the status field set to any other value, the TDR will only point to one TD and buffer regardless of the values of V and CE in that TD. The underflow status bit (Status[2]) is normally attached to the TDR belonging to a packet experiencing underflow. For long packets spanning multiple buffers, underflow is reported only once at the first available TDR of that channel. All subsequent TDRs of that packet will be returned normally without the underflow status. In rare cases, due to internal buffering by the FREEDM-8, a packet may experience underflow at the very end of a packet, just as the TDR is being returned to the TDR free queue. The underflow status will then be reported in the first TDR of the immediate next packet of that channel. Because of the uncertainty with the reporting of underflows between the current verse the subsequent packet, the underflow status should only be used to gather performance statistics on channels and not for initiating packet specific responses such as retransmission. 61 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Transmit Channel Descriptor Reference Table The TMAC maintains a Transmit Channel Descriptor Reference (TCDR) table in which is stored certain information relating to DMA activity on each channel together with TD pointers which are used by the TMAC to sort packet chains supplied by the host into per-channel linked lists (see below). The caching of DMA-related information reduces the number of host bus accesses required to process each data packet, while the sorting into per-channel linked lists eliminates head of line blocking. Each channel is provided with two entries in the TCDR table, one for high priority packets (Pri 1) and one for low priority packets (Pri 0). The structure of the TCDR table is shown in Figure 13 below. Figure 13 - Transmit Channel Descriptor Reference Table Bit 31 TCC 0, Pri 0 M CE Bit 0 Last TD Pointer [13:0] Bytes to Tx [15:0] A D Current TD Pointer [13:0] Abrt IOC Host TD Pointer [13:0] DMA Current Address [31:0] Reserved TCC 1, Pri 0 M CE PiP NA U Last TD Pointer [13:0] Bytes to Tx [15:0] Last M V Next TD Pointer [13:0] A D Current TD Pointer [13:0] Abrt IOC Host TD Pointer [13:0] DMA Current Address [31:0] Reserved PiP NA U Last M V Next TD Pointer [13:0] A D Current TD Pointer [13:0] : : : TCC 127, Pri 1 M CE Last TD Pointer [13:0] Bytes to Tx [15:0] Abrt IOC Host TD Pointer [13:0] DMA Current Address [31:0] Reserved PiP NA U Last M V Next TD Pointer [13:0] Table 13 - Transmit Channel Descriptor Reference Table Fields Field Description M A copy of the M bit in the TD currently being read. CE A copy of the CE bit in the TD currently being read. Last TD Pointer [13:0] Offset to the head of the last host-linked chain of TDs to be read. (See Figure 14) 62 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Field Description A Indicates if this channel is active (i.e. provisioned). If the channel is active, the A bit is set to logic 1. If the channel is inactive, the A bit is set to logic 0. D Indicates whether the linked list of packets for this channel is empty or not. If the D bit is set to logic 1, the list is not empty and the current TD pointer field is valid (i.e., it points to a valid TD). If the D bit is set to logic 0, the list is empty and the current TD pointer field is invalid. Current TD Pointer [13:0] Offset to the TD currently being read. Bytes To Tx[15:0] The Bytes to Tx[15:0] bits are used to indicate the total number of bytes that remain to be read in the current buffer. Each access to the data buffer decrements this value. A value of zero in this field indicates the buffer has been completely read. ABRT A copy of the ABRT bit in the TD currently being read. IOC A copy of the IOC bit in the TD currently being read. PiP The Packet Transfer in Progress bit indicates that a packet is currently being transmitted on this channel at this priority level. NA Indicates that a `null abort' is to be sent to the downstream block when it next requests data on this channel. The NA bit is set if a mal-formed TD is encountered while searching down a host chain. U Indicates that a underflow has occurred on this channel. This bit is set in response to an underflow indication for the downstream THDL block and is cleared when a TDR is written to the TDR Free Queue (or to the free queue cache). Host TD Pointer [13:0] A copy of the Host Next TD Pointer field of the TD currently being read, i.e. a pointer to the next TD in the chain currently being read. (See Figure 14) DMA Current Address[31:0] The DMA Current Address [31:0] bits hold the address of the next dword in the current buffer. This field is incremented on each access to the buffer. V Indicates if the linked list of packets for this channel contains more than one host-linked chain (See Figure 14). If the V bit is set to logic 1, the list contains more than one chain and the next and last TD pointer fields are valid. If the V bit is set to logic 0, the list is either empty or contains only one host-linked chain and the next and last TD pointer fields are invalid. Next TD Pointer [13:0] Offset to the head of the next host-linked chain of TDs to be read. (See Figure 14) 63 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Transmit Descriptor Linking As described above, the TCDR table contains pointers which the TMAC uses to construct linked lists of data packets to be transmitted. After the host places a new TDR in the TDR Ready queue, the TMAC retrieves the TDR and links it to the TD pointed at by the Last TD Pointer field. The TMAC may create up to 256 linked lists, viz. a high-priority list and a low-priority list for each DMA channel. Whenever a new data packet is requested by the downstream block, the TMAC picks a packet from the high-priority linked list unless it is empty, in which case, a packet from the lowpriority linked list is used. 64 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 14 - TD Linking TD TD Curr. Next Last Host TDR TDR TDR TDR V=1 M=1 CE=0 TCDR Table TD P3 P1 V=1 M=1 CE=0 TMAC Link Data P4 TMAC Link V=0 M=0 CE=1 Data Host Link Host Link TD TD P3 P1 M=1 CE=0 M=0 CE=1 Data Data Host Link TD P1 M=0 CE=0 Data Host Link TD P2 M=0 CE=1 Data The host links the TDs vertically while the TMAC links TDs horizontally. Figure 14 shows the TDs for packets P1 and P2 linked by the host before the TDR is placed on the TDRR queue, as are the TDs for packet P3. Packet P3 is linked to packet P1 by the TMAC, as is packet P4 linked to packet P3. The TMAC indicates valid horizontal links by setting the V bit to logic 1. 65 PM7366 FREEDM-8 DATA SHEET PMC-970930 9.6.2 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Task Priorities The TMAC must perform a number of tasks concurrently in order to maintain a steady flow of data through the system. The main tasks of the TMAC are managing the Ready Queue (i.e. removing chains of data packets from the queue and attaching them to the appropriate per-channel linked list) and servicing requests for data from the Transmit Packet Interface. The priority of service for each of the tasks is fixed by the TMAC as follows:- 9.6.3 * Top priority is given to servicing `expedited' read requests from the Transmit HDLC Processor / Partial Packet Buffer block (THDL). * Second priority is given to removing chains of data packets from the TDRR queue and attaching them to the appropriate per-channel linked list. * Third priority is given to servicing non-expedited read requests from the THDL. DMA Transaction Controller The DMA Transaction Controller coordinates the processing of requests from the THDL with the reading of data stored in host memory. The reading of a data packet may require a number of separate host memory transactions, interleaved with transactions of other DMA channels. As well as reading data from the Host Master Interface, the DMA Transaction Controller initiates read and write transactions to the PCI Controller block (GPIC) for the purposes of maintaining the data structures (queues, descriptors, etc.) in host memory. 9.6.4 Read Data Pipeline The Read Data Pipeline inserts delay in the data stream between the GPIC interface and the THDL interface to enable the DMA Transaction Controller to generate appropriate control signals at the Transmit Packet Interface. 9.6.5 Descriptor Information Cache The Descriptor Information Cache provides the storage for the Transmit Channel Descriptor Reference (TCDR) Table. 9.6.6 Free Queue Cache The Free Queue Cache block implements the 6 element TDR Free Queue cache. Caching TDRs reduces the number of host bus accesses that the TMAC makes. TDRs are written to the cache one at a time as they are released by the TMAC. The cache is then flushed to host memory when it becomes full, when a TD with the IOC bit set high is released or when a TD is released as the result of unprovisioning a channel. The cache controller may also flush the cache when it contains fewer than six elements or if the pointer index is within six 66 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER elements of the end of the free queue. If the write pointer is near the end of the free queue, the cache controller writes only to the end of the queue and does not start writing from the top of the queue until the next time a flush is required. To do so would require two host memory transactions and would be of no benefit. 9.7 Transmit HDLC Controller / Partial Packet Buffer The Transmit HDLC Controller / Partial Packet Buffer block (THDL) contains a partial packet buffer for PCI latency control and a transmit HDLC controller. Packet data retrieved from the PCI host memory by the Transmit DMA Controller block (TMAC) is stored in channel specific FIFOs residing in the partial packet buffer. When the amount of data in a FIFO reaches a programmable threshold, the HDLC controller is enabled to initiate transmission. The HDLC controller performs flag generation, bit stuffing and, optionally, frame check sequence (FCS) insertion. The FCS is software selectable to be CRC-CCITT or CRC-32. The minimum packet size, excluding FCS, is two bytes. A single byte payload is illegal. The HDLC controller delivers data to the Transmit Channel Assigner block (TCAS) on demand. A packet in progress is aborted if an under-run occurs. The THDL is programmable to operate in transparent mode where packet data retrieved from the PCI host is transmitted verbatim. 9.7.1 Transmit HDLC Processor The HDLC processor is a time-slice state machine which can process up to 128 independent channels. The state vector and provisioning information for each channel is stored in a RAM. Whenever the TCAS requests data, the appropriate state vector is read from the RAM, processed and finally written back to the RAM. The HDLC state-machine can be configured to perform flag insertion, bit stuffing and CRC generation. The HDLC processor requests data from the partial packet processor whenever a request for channel data arrives. However, the HDLC processor does not start transmitting a packet until the entire packet is stored in the channel FIFO or until the FIFO free space is less than the software programmable limit. If a channel FIFO under-runs, the HDLC processor aborts the packet. The configuration of the HDLC processor is accessed using indirect channel read and write operations. When an indirect operation is performed, the information is accessed from RAM during a null clock cycle inserted by the TCAS block. Writing new provisioning data to a channel resets the channel's entire state vector. 9.7.2 Transmit Partial Packet Buffer Processor The partial packet buffer processor controls the 8 Kbyte partial packet RAM which is divided into 16 byte blocks. A block pointer RAM is used to chain the partial packet blocks into circular channel FIFO buffers. Thus, non-contiguous sections of RAM can be allocated in the partial packet buffer RAM to create a channel FIFOFigure 15 shows an example of three blocks (blocks 1, 3, and 200) linked together to form a 48 byte channel FIFO. The three pointer values would be written sequentially using indirect block write accesses. When a channel is provisioned with this FIFO, the state machine can be initialised to point to any one of the three blocks. 67 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The partial packet buffer processor is divided into three sections: reader, writer and roamer. The roamer is a time-sliced state machine which tracks each channel's FIFO buffer free space and signals the writer to service a particular channel. The writer requests data from the TMAC block and transfers packet data from the TMAC to the associated channel FIFO. The reader is a timesliced state machine which transfers the HDLC information from a channel FIFO to the HDLC processor when the HDLC processor requests it. If a buffer under-run occurs for a channel, the reader informs the HDLC processor and purges the rest of the packet. Figure 15 - Partial Packet Buffer Structure Partial Packet Buffer RAM Block Pointer RAM Block 0 16 bytes Block 0 XX Block 1 16 bytes Block 1 0x03 Block 2 16 bytes Block 2 XX Block 3 16 bytes Block 3 0xC8 Block 200 16 bytes Block 200 0x01 Block 511 16 bytes Block 511 XX The writer and reader determine empty and full FIFO conditions using flags. Each block in the partial packet buffer has an associated flag. The writer sets the flag after the block is written and the reader clears the flag after the block is read. The flags are initialized (cleared) when the block pointers are written using indirect block writes. The reader declares a channel FIFO under-run whenever it tries to read data from a block without a set flag. The FIFO algorithm of the partial packet buffer processor is based on per-channel software programmable transfer size and free space trigger level. Instead of tracking the number of full blocks in a channel FIFO, the processor tracks the number of empty blocks, called free space, as well as the number of end of packets stored in the FIFO. Recording the number of empty blocks 68 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER instead of the number of full blocks reduces the amount of information the roamer must store in its state RAM. The partial packet roamer records the FIFO free space and end-of-packet count for all channel FIFOs. When the reader signals that a block has been read, the roamer increments the FIFO free space and sets a per-channel request flag if the free space is greater than the limit set by XFER[2:0]. The roamer also decrements the end-of-packet count when the reader signals that it has passed an end of a packet to the HDLC processor. If the HDLC is transmitting a packet and the FIFO free space is greater than the free space trigger level and there are no complete packets within the FIFO (end-of-packet count equal to zero), a per-channel expedite flag is set. The roamer searches the expedite flags in a round-robin fashion to decide which channel FIFO should make expedited data requests to the TMAC block. If no expedite flags are set, the roamer searches the request flags in a round-robin fashion to decide which channel FIFO should make regular data requests to the TMAC block. The roamer informs the partial packet writer of the channel FIFO to process, the FIFO free space and the type of request it should make. The writer sends a request for data to the TMAC block and writes the response data to the channel FIFO setting block full flags. The writer reports back to the roamer the number of blocks and end-ofpackets transferred. The maximum amount of data transferred during one request is limited by a software programmable limit. The configuration of the HDLC processor is accessed using indirect channel read and write operations as well as indirect block read and write operations. When an indirect operation is performed, the information is accessed from RAM during a null clock cycle identified by the TCAS block. Writing new provisioning data to a channel resets the entire state vector. 9.8 Transmit Channel Assigner The Transmit Channel Assigner block (TCAS) processes up to 128 channels. Data for all channels is sourced from a single byte-serial stream from the Transmit HDLC Controller / Partial Packet Buffer block (THDL). The TCAS demultiplexes the data and assigns each byte to any one of 8 links. Each link is independent and has its own associated clock. For each high-speed link (TD[2:0]), the TCAS provides a six byte FIFO. For the remaining links (TD[7:3]), the TCAS provides a holding register. The TCAS also performs parallel to serial conversion to form a bitserial stream. In the event where multiple links are in need of data, TCAS requests data from upstream blocks on a fixed priority basis with link TD[0] having the highest priority and link TD[7] the lowest. Links containing a T1 or an E1 stream may be channelised. Data at each time-slot may be independently assigned to be sourced from a different channel. The link clock is only active during time-slots 1 to 24 of a T1 stream and is inactive during the frame bit. Similarly, the clock is only active during time-slots 1 to 31 of an E1 stream and is inactive during the FAS and NFAS framing bytes. The most significant bit of time-slot 1 of a channelised link is identified by noting the absence of the clock and its re-activation. With knowledge of the transmit link and time-slot identity, the TCAS performs a table look-up to identify the channel from which a data byte is to be sourced. 69 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Links may also be unchannelised. Then, all data bytes on that link belong to one channel. The TCAS performs a table look-up to identify the channel to which a data byte belongs using only the outgoing link identity, as no time-slots are associated with unchannelised links. Link clocks are no longer limited to T1 or E1 rates and may range up to 52 MHz for TCLK[2:0]. For TCLK[7:3] the maximum clock rate is 10 MHz. The link clock is only active during bit times containing data to be transmitted and inactive during bits that are to be ignored by the downstream devices, such as framing and overhead bits. For the case of two unchannelised links, the maximum link rate 52 MHz for SYSCLK at 33 MHz. For the case of more numerous unchannelised links or a mixture of channelised and unchannelised links, the total instantaneous link rate over all the links is limited to 64 MHz. 9.8.1 Line Interface There are two types of line interfaces in the TCAS; high-speed and low-speed interfaces. Three identical high-speed interfaces are attached to the first three links, while five identical low-speed interfaces are attached to the remaining links. Each line interface contains a bit counter, an 8-bit shift register and a byte FIFO, that, together, perform parallel to serial conversion. For the highspeed interfaces the FIFO is six bytes deep. For the low-speed interfaces, the FIFO is a single byte holding register. Whenever the shift register is updated, a request for service is sent to the priority encoder block. The request will eventually be serviced by the THDL block and the data is written into the FIFO. To support channelised links, each line interface block contains a time-slot counter and a clock activity monitor. The time-slot counter is incremented each time the shift register is updated. The clock activity monitor is a counter that increments at the system clock (SYSCLK) rate and is cleared by a rising edge of the transmit clock (TCLK[n]). A framing bit (T1) or framing byte (E1) is detected when the counter reaches a programmable threshold. At which point, the bit and timeslot counters are initialised to indicate the next bit sampled is the most significant bit of the first time-slot. For unchannelised links, the time-slot counter and the clock activity monitor are held reset. 9.8.2 Priority Encoder The priority encoder monitors the line interfaces for requests and synchronises them to the SYSCLK timing domain. Requests are serviced on a fixed priority scheme where highest to lowest priority is assigned from line interface TD[0] to line interface TD[7]. Thus, simultaneous requests from line interface TD[m] will be serviced ahead of line interface TD[n], if m < n. The priority encoder selects the request from the link with the highest priority for service. When there are no pending requests, the priority encoder generates an idle cycle. In addition, once every fourth SYSCLK cycle, the priority encoder inserts a null cycle where no requests are serviced. This cycle is used by the channel assigner downstream for CBI accesses to the channel provision RAM. 70 PM7366 FREEDM-8 DATA SHEET PMC-970930 9.8.3 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Channel Assigner The channel assigner block determines the channel number of the request currently being processed. The block contains a 256 word channel provision RAM. The address of the RAM is constructed from concatenating the link number and the time-slot number of the highest priority requester. The fields of each RAM word include the channel number and a time-slot enable flag. The time-slot enable flag labels the current time-slot as belonging to the channel indicted by the channel number field. For time-slots that are enabled, the channel assigner issues a request to the THDL block which responds with packet data within one byte period of the transmit stream. 9.9 Performance Monitor The Performance Monitor block (PMON) contains four counters. The first two accumulate receive partial packet buffer FIFO overrun events and transmit partial packet buffer FIFO underflow events, respectively. The remaining two counters are software programmable to accumulate a variety of events, such as receive packet count, FCS error counts, etc. All counters saturate upon reaching maximum value. The accumulation logic consists of a counter and holding register pair. The counter is incremented when the associated event is detected. Writing to the FREEDM-8 Master Clock / BERT Activity Monitor and Accumulation Trigger register transfer the count to the corresponding holding register and clear the counter. The contents of the holding register is accessible via the PCI interface. 9.10 JTAG Test Access Port Interface The JTAG Test Access Port block provides JTAG support for boundary scan. The standard JTAG EXTEST, SAMPLE, BYPASS, IDCODE and STCTEST instructions are supported. The FREEDM8 identification code is 173660CD hexadecimal. 9.11 PCI Host Interface The FREEDM-8 supports two different normal mode register types as defined below: 1. PCI Host Accessible registers (PA) - these registers can be accessed through the PCI Host interface. 2. PCI Configuration registers (PC) - these register can only be accessed through the PCI Host interface during a PCI configuration cycle. The PCI registers are addressable on dword boundaries only. The PCI offset shown in the table below must be combined with a base address to form the PCI Interface address. The base address can be found in the FREEDM-8 Memory Base Address register in the PCI Configuration memory space. 71 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 14 - Normal Mode PCI Host Accessible Register Memory Map PCI Offset Register 0x000 FREEDM-8 Master Reset 0x004 FREEDM-8 Master Interrupt Enable 0x008 FREEDM-8 Master Interrupt Status 0x00C FREEDM-8 Master Clock / BERT Activity Monitor and Accumulation Trigger 0x010 FREEDM-8 Master Link Activity Monitor 0x014 FREEDM-8 Master Line Loopback 0x018 - 0x01C Reserved 0x020 FREEDM-8 Master BERT Control 0x024 FREEDM-8 Master Performance Monitor Control 0x028 - 0x03C Reserved 0x040 GPIC Control 0x044 - 0x07C GPIC Reserved 0x080 - 0x0FC Reserved 0x100 RCAS Indirect Channel and Time-slot Select 0x104 RCAS Indirect Channel Data 0x108 RCAS Framing Bit Threshold 0x10C RCAS Channel Disable 0x110 - 0x17C RCAS Reserved 0x180 RCAS Link #0 Configuration 0x184 - 0x19C RCAS Link #1 to Link #7 Configuration 0x1A0 - 0x1FC RCAS Reserved 0x200 RHDL Indirect Channel Select 0x204 RHDL Indirect Channel Data Register #1 0x208 RHDL Indirect Channel Data Register #2 0x20C RHDL Reserved 0x210 RHDL Indirect Block Select 0x214 RHDL Indirect Block Data Register 0x218 RHDL Reserved 0x21C RHDL Reserved 72 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER PCI Offset Register 0x220 RHDL Configuration 0x224 RHDL Maximum Packet Length 0x228 - 0x23C RHDL Reserved 0x240 - 0x27C Reserved 0x280 RMAC Control 0x284 RMAC Indirect Channel Provisioning 0x288 RMAC Packet Descriptor Table Base LSW 0x28C RMAC Packet Descriptor Table Base MSW 0x290 RMAC Queue Base LSW 0x294 RMAC Queue Base MSW 0x298 RMAC Packet Descriptor Reference Large Buffer Free Queue Start 0x29C RMAC Packet Descriptor Reference Large Buffer Free Queue Write 0x2A0 RMAC Packet Descriptor Reference Large Buffer Free Queue Read 0x2A4 RMAC Packet Descriptor Reference Large Buffer Free Queue End 0x2A8 RMAC Packet Descriptor Reference Small Buffer Free Queue Start 0x2AC RMAC Packet Descriptor Reference Small Buffer Free Queue Write 0x2B0 RMAC Packet Descriptor Reference Small Buffer Free Queue Read 0x2B4 RMAC Packet Descriptor Reference Small Buffer Free Queue End 0x2B8 RMAC Packet Descriptor Reference Ready Queue Start 0x2BC RMAC Packet Descriptor Reference Ready Queue Write 0x2C0 RMAC Packet Descriptor Reference Ready Queue Read 0x2C4 RMAC Packet Descriptor Reference Ready Queue End 0x2C8 - 0x2FC RMAC Reserved 0x300 TMAC Control 0x304 TMAC Indirect Channel Provisioning 0x308 TMAC Descriptor Table Base LSW 0x30C TMAC Descriptor Table Base MSW 0x310 TMAC Queue Base LSW 0x314 TMAC Queue Base MSW 73 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER PCI Offset Register 0x318 TMAC Descriptor Reference Free Queue Start 0x31C TMAC Descriptor Reference Free Queue Write 0x320 TMAC Descriptor Reference Free Queue Read 0x324 TMAC Descriptor Reference Free Queue End 0x328 TMAC Descriptor Reference Ready Queue Start 0x32C TMAC Descriptor Reference Ready Queue Write 0x330 TMAC Descriptor Reference Ready Queue Read 0x334 TMAC Descriptor Reference Ready Queue End 0x338 - 0x37C TMAC Reserved 0x380 THDL Indirect Channel Select 0x384 THDL Indirect Channel Data #1 0x388 THDL Indirect Channel Data #2 0x38C THDL Indirect Channel Data #3 0x390 THDL Reserved 0x394 THDL Reserved 0x398 THDL Reserved 0x39C THDL Reserved 0x3A0 THDL Indirect Block Select 0x3A4 THDL Indirect Block Data 0x3A8 THDL Reserved 0x3AC THDL Reserved 0x3B0 THDL Configuration 0x3B4 - 0x3BC THDL Reserved 0x3C0 - 0x3FF Reserved 0x400 TCAS Indirect Channel and Time-slot Select 0x404 TCAS Indirect Channel Data 0x408 TCAS Framing Bit Threshold 0x40C TCAS Idle Time-slot Fill Data and Config. 0x410 TCAS Channel Disable 74 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER PCI Offset Register 0x414 - 0x47C TCAS Reserved 0x480 TCAS Link #0 Configuration 0x484 - 0x49C TCAS Link #1 to Link #7 Configuration 0x4A0 - 0x4FC TCAS Reserved 0x500 PMON Status 0x504 PMON Receive FIFO Overflow Count 0x508 PMON Transmit FIFO Underflow Count 0x50C PMON Configurable Count #1 0x510 PMON Configurable Count #2 0x514 - 0x51C PMON Reserved 0x520 - 0x7FC Reserved The following PCI configuration registers are implemented by the PCI Interface. These registers can only be accessed when the PCI Interface is a target and a configuration cycle is in progress as indicated using the IDSEL input. Table 15 - PCI Configuration Register Memory Map PCI Offset Register 0x00 Vendor Identification/Device Identification 0x04 Command/Status 0x08 Revision Identifier/Class Code 0x0C Cache Line Size/Latency Timer/Header Type/BIST 0x10 CBI Memory Base Address Register 0x14 - 0x24 Unused Base Address Register 0x28 Reserved 0x2C Reserved 0x30 Reserved 0x34 Reserved 0x38 Reserved 0x3C Interrupt Line/Interrupt Pin/MIN_GNT/MAX_LAT 75 PM7366 FREEDM-8 DATA SHEET PMC-970930 10 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER NORMAL MODE REGISTER DESCRIPTION Normal mode registers are used to configure and monitor the operation of the FREEDM. Notes on Normal Mode Register Bits: 1. Writing values into unused register bits has no effect. However, to ensure software compatibility with future, feature-enhanced versions of the product, unused register bits must be written with logic zero. Reading back unused bits can produce either a logic one or a logic zero; hence, unused register bits should be masked off by software when read. 2. Except where noted, all configuration bits that can be written into can also be read back. This allows the processor controlling the FREEDM-8 to determine the programming state of the block. 3. Writable normal mode register bits are cleared to logic zero upon reset unless otherwise noted. 4. Writing into read-only normal mode register bit locations does not affect FREEDM-8 operation unless otherwise noted. 5. Certain register bits are reserved. These bits are associated with megacell functions that are unused in this application. To ensure that the FREEDM-8 operates as intended, reserved register bits must only be written with their default values. Similarly, writing to reserved registers should be avoided. 10.1 PCI Host Accessible Registers PCI host accessible registers can be accessed by the PCI host. For each register description below, the hexadecimal register number indicates the PCI offset from the base address in the FREEDM-8 CBI Register Base Address Register when accesses are made using the PCI Host Port. Note These registers are not byte addressable. Writing to any one of these registers modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to the register. 76 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x000 : FREEDM-8 Master Reset Bit Type Function Default Unused XXXXH Reset 0 Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 Unused X Bit 1 Unused X Bit 0 Unused X Bit 31 to Bit 16 Bit 15 R/W This register provides software reset capability. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RESET: The RESET bit allows the FREEDM-8 to be reset under software control. If the RESET bit is a logic one, the entire FREEDM-8 except the PCI Interface is held in reset. This bit is not self-clearing. Therefore, a logic zero must be written to bring the FREEDM-8 out of reset. 77 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Holding the FREEDM-8 in a reset state places it into a low power, stand-by mode. A hardware reset clears the RESET bit, thus negating the software reset. Note Unlike the hardware reset input (RSTB), RESET does not force the FREEDM-8's PCI pins tri-state. Transmit link data pins (TD[7:0]) are forced high. In addition, all registers except the GPIC PCI Configuration registers, are reset to their default values. 78 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x004 : FREEDM-8 Master Interrupt Enable Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TFUDRE 0 Bit 14 R/W IOCE 0 Bit 13 R/W TDFQEE 0 Bit 12 R/W TDQRDYE 0 Bit 11 R/W TDQFE 0 Bit 10 R/W RPDRQEE 0 Bit 9 R/W RPDFQEE 0 Bit 8 R/W RPQRDYE 0 Bit 7 R/W RPQLFE 0 Bit 6 R/W RPQSFE 0 Bit 5 R/W RFOVRE 0 Bit 4 R/W RPFEE 0 Bit 3 R/W RABRTE 0 Bit 2 R/W RFCSEE 0 Bit 1 R/W PERRE 0 Bit 0 R/W SERRE 0 This register provides interrupt enables for various events detected or initiated by the FREEDM. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. SERRE: The system error interrupt enable bit (SERRE) enables PCI system error interrupts to the PCI host. When SERRE is set high, any address parity error, data parity error on Special Cycle commands, reception of a master abort or detection of a target abort will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when SERRE is set low. 79 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER However, the SERRI bit remains valid when interrupts are disabled and may be polled to detect PCI system error events. PERRE: The parity error interrupt enable bit (PERRE) enables PCI parity error interrupts to the PCI host. When PERRE is set high, data parity errors detected by the FREEDM-8 or parity errors reported by a target will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when PERRE is set low. However, the PERRI bit remains valid when interrupts are disabled and may be polled to detect PCI parity error events. RFCSEE: The receive frame check sequence error interrupt enable bit (RFCSEE) enables receive FCS error interrupts to the PCI host. When RFCSEE is set high, a mismatch between the received FCS code and the computed CRC residue will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RFCSEE is set low. However, the RFCSEI bit remains valid when interrupts are disabled and may be polled to detect receive FCS error events. RABRTE: The receive abort interrupt enable bit (RABRTE) enables receive HDLC abort interrupts to the PCI host. When RABRTE is set high, receipt of an abort code (at least 7 contiguous 1's) will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RABRTE is set low. However, the RABRTI bit remains valid when interrupts are disabled and may be polled to detect receive abort events. RPFEE: The receive packet format error interrupt enable bit (RPFEE) enables receive packet format error interrupts to the PCI host. When RPFEE is set high, receipt of a packet that is longer than the maximum specified in the RHDL Maximum Packet Length register, of a packet that is shorter than 32 bits (CRC-CCITT) or 48 bits (CRC-32), or of a packet that is not octet aligned will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RPFEE is set low. However, the RPFEI bit remains valid when interrupts are disabled and may be polled to detect receive packet format error events. RFOVRE: The receive FIFO overrun error interrupt enable bit (RFOVRE) enables receive FIFO overrun error interrupts to the PCI host. When RFOVRE is set high, attempts to write data into the logical FIFO of a channel when it is already full will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RFOVRE is set low. However, the RFOVRI bit remains valid when interrupts are disabled and may be polled to detect receive FIFO overrun events. 80 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER RPQSFE: The receive packet descriptor small buffer free queue cache read interrupt enable bit (RPQSFE) enables receive packet descriptor small free queue cache read interrupts to the PCI host. When RPQSFE is set high, reading a programmable number of RPDR blocks from the RPDR Small Buffer Free Queue will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RPQSFE is set low. However, the RPQSFI bit remains valid when interrupts are disabled and may be polled to detect RPDR small buffer free queue cache read events. RPQLFE: The receive packet descriptor large buffer free queue cache read interrupt enable bit (RPQLFE) enables receive packet descriptor large free queue cache read interrupts to the PCI host. When RPQLFE is set high, reading a programmable number of RPDR blocks from the RPDR Large Buffer Free Queue will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RPQLFE is set low. However, the RPQLFI bit remains valid when interrupts are disabled and may be polled to detect RPDR large buffer free queue cache read events. RPQRDYE: The receive packet descriptor ready queue write interrupt enable bit (RPQRDYE) enables receive packet descriptor ready queue write interrupts to the PCI host. When RPQRDYE is set high, writing a programmable number of RPDRs to the RPDR Ready Queue will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RPQRDYE is set low. However, the RPQRDYI bit remains valid when interrupts are disabled and may be polled to detect RPDR ready queue write events. RPDFQEE: The receive packet descriptor free queue error interrupt enable bit (RPDFQEE) enables receive packet descriptor free queue error interrupts to the PCI host. When RPDFQEE is set high, attempts to retrieve an RPDR when both the large buffer and small buffer free queues are empty will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RPDFQEE is set low. However, the RPDFQEI bit remains valid when interrupts are disabled and may be polled to detect RPDR free queue empty error events. RPDRQEE: The receive packet descriptor ready queue error interrupt enable bit (RPDRQEE) enables receive packet descriptor ready queue error interrupts to the PCI host. When RPDRQEE is set high, attempts to write an RPDR when ready queue is ready full will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when RPDRQEE is set low. However, the RPDRQEI bit remains valid when interrupts are disabled and may be polled to detect RPDR ready queue full error events. 81 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER TDQFE: The transmit packet descriptor free queue write interrupt enable bit (TDQFE) enables transmit packet descriptor free queue write interrupts to the PCI host. When TDQFE is set high, writing a programmable number of TDRs to the TDR Free Queue will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when TDQFE is set low. However, the TDQFI bit remains valid when interrupts are disabled and may be polled to detect TDR free queue write events. TDQRDYE: The transmit descriptor ready queue cache read interrupt enable bit (TDQRDYE) enables transmit descriptor ready queue cache read interrupts to the PCI host. When TDQRDYE is set high, reading a programmable number of TDRs from the TDR Ready Queue will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when TDQRDYE is set low. However, the TDQRDYI bit remains valid when interrupts are disabled and may be polled to detect TDR ready queue cache read events. TDFQEE: The transmit descriptor free queue error interrupt enable bit (TDFQEE) enables transmit descriptor free queue error interrupts to the PCI host. When TDFQEE is set high, attempting to write to the transmit free queue while the queue is full will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when TDFQEE is set low. However, the TDFQEI bit remains valid when interrupts are disabled and may be polled to detect TD free queue error events. IOCE: The transmit interrupt on complete enable bit (IOCE) enables transmission complete interrupts to the PCI host. When IOCE is set high, complete transmission of a packet with the IOC bit in the TD set high will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when IOCE is set low. However, the IOCI bit remains valid when interrupts are disabled and may be polled to detect transmission of IOC tagged packets. TFUDRE: The transmit FIFO underflow error interrupt enable bit (TFUDRE) enables transmit FIFO underflow error interrupts to the PCI host. When TFUDRE is set high, attempts to read data from the logical FIFO when it is already empty will cause an interrupt to be generated on the PCIINTB output. Interrupts are masked when TFUDRE is set low. However, the TFUDRI bit remains valid when interrupts are disabled and may be polled to detect transmit FIFO underflow events. 82 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x008 : FREEDM-8 Master Interrupt Status Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R TFUDRI X Bit 14 R IOCI X Bit 13 R TDFQEI X Bit 12 R TDQRDYI X Bit 11 R TDQFI X Bit 10 R RPDRQEI X Bit 9 R RPDFQEI X Bit 8 R RPQRDYI X Bit 7 R RPQLFI X Bit 6 R RPQSFI X Bit 5 R RFOVRI X Bit 4 R RPFEI X Bit 3 R RABRTI X Bit 2 R RFCSEI X Bit 1 R PERRI X Bit 0 R SERRI X This register reports the interrupt status for various events detected or initiated by the FREEDM. Reading this registers acknowledges and clears the interrupts. Note This register is not byte addressable. Reading this register clears all the interrupt bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. SERRI: The system error interrupt status bit (SERRI) reports PCI system error interrupts to the PCI host. SERRI is set high upon detection of any address parity error, data parity error on Special Cycle commands, reception of a master abort or detection of a target abort event. 83 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The SERRI bit remains valid when interrupts are disabled and may be polled to detect PCI system error events. PERRI: The parity error interrupt status bit (PERRI) reports PCI parity error interrupts to the PCI host. PERRI is set high when data parity errors are detected by the FREEDM-8 while acting as a master, and when parity errors are reported to the FREEDM-8 by a target via the PERRB input. The PERRI bit remains valid when interrupts are disabled and may be polled to detect PCI parity error events. RFCSEI: The receive frame check sequence error interrupt status bit (RFCSEI) reports receive FCS error interrupts to the PCI host. RFCSEI is set high, when a mismatch between the received FCS code and the computed CRC residue is detected. RFCSEI remains valid when interrupts are disabled and may be polled to detect receive FCS error events. RABRTI: The receive abort interrupt status bit (RABRTI) reports receive HDLC abort interrupts to the PCI host. RABRTI is set high upon receipt of an abort code (at least 7 contiguous 1's). RABRTI remains valid when interrupts are disabled and may be polled to detect receive abort events. RPFEI: The receive packet format error interrupt status bit (RPFEI) reports receive packet format error interrupts to the PCI host. RPFEI is set high upon receipt of a packet that is longer than the maximum programmed length, of a packet that is shorter than 32 bits (CRC-CCITT) or 48 bits (CRC-32), or of a packet that is not octet aligned. RPFEI remains valid when interrupts are disabled and may be polled to detect receive packet format error events. RFOVRI: The receive FIFO overrun error interrupt status bit (RFOVRI) reports receive FIFO overrun error interrupts to the PCI host. RFOVRI is set high on attempts to write data into the logical FIFO of a channel when it is already full. RFOVRI remains valid when interrupts are disabled and may be polled to detect receive FIFO overrun events. RPQSFI: The receive packet descriptor small buffer free queue cache read interrupt status bit (RPQSFI) reports receive packet descriptor small free queue cache read interrupts to the PCI host. RPQSFI is set high when the programmable number of RPDR blocks is read from the RPDR Small Buffer Free Queue. RPQSFI remains valid when interrupts are disabled and may be polled to detect RPDR small buffer free queue cache read events. 84 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER RPQLFI: The receive packet descriptor large buffer free queue cache read interrupt status bit (RPQLFI) reports receive packet descriptor large free queue cache read interrupts to the PCI host. RPQLFI is set high when the programmable number of RPDR blocks is read from the RPDR Large Buffer Free Queue. RPQLFI remains valid when interrupts are disabled and may be polled to detect RPDR large buffer free queue cache read events. RPQRDYI: The receive packet descriptor ready queue write interrupt status bit (RPQRDYI) reports receive packet descriptor ready queue write interrupts to the PCI host. RPQRDYI is set high when the programmable number of RPDRs is written to the RPDR Ready Queue. RPQRDYI remains valid when interrupts are disabled and may be polled to detect RPDR ready queue write events. RPDFQEI: The receive packet descriptor free queue error interrupt status bit (RPDFQEI) reports receive packet descriptor free queue error interrupts to the PCI host. RPDFQEI is set high upon attempts to retrieve an RPDR when both the large buffer and small buffer free queues are empty. RPDFQEI remains valid when interrupts are disabled and may be polled to detect RPDR free queue empty error events. RPDRQEI: The receive packet descriptor ready queue error interrupt status bit (RPDRQEI) reports receive packet descriptor ready queue error interrupts to the PCI host. RPDRQEI is set high upon attempts to write an RPDR when ready queue is ready full. RPDRQEI remains valid when interrupts are disabled and may be polled to detect RPDR ready queue full error events. TDQFI: The transmit packet descriptor free queue write interrupt status bit (TDQFI) reports transmit packet descriptor free queue write interrupts to the PCI host. TDQFI is set high when the programmable number of TDRs is written to the TDR Free Queue. TDQFI remains valid when interrupts are disabled and may be polled to detect TDR free queue write events. TDQRDYI: The transmit descriptor ready queue cache read interrupt status bit (TDQRDYI) reports transmit descriptor ready queue cache read interrupts to the PCI host. TDQRDYI is set high when the programmable number of TDRs is read from the TDR Ready Queue. TDQRDYI remains valid when interrupts are disabled and may be polled to detect TDR ready queue cache read events. TDFQEI: The transmit descriptor free queue error interrupt status bit (TDFQEI) reports transmit descriptor free queue error interrupts to the PCI host. TDFQEI is set high when an attempt to 85 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER write to the transmit free queue fail due to the queue being already full. TDFQEI bit remains valid when interrupts are disabled and may be polled to detect TD free queue error events. IOCI: The transmit interrupt on complete status bit (IOCI) reports transmission complete interrupts to the PCI host. IOCI is set high, when a packet with the IOC bit in the TD set high is completely transmitted. IOCI remains valid when interrupts are disabled and may be polled to detect transmission of IOC tagged packets. TFUDRI: The transmit FIFO underflow error interrupt status bit (TFUDRI) reports transmit FIFO underflow error interrupts to the PCI host. TFUDRI is set high upon attempts to read data from the logical FIFO when it is already empty. TFUDRI remains valid when interrupts are disabled and may be polled to detect transmit FIFO underflow events. 86 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x00C : FREEDM-8 Master Clock / BERT Activity Monitor and Accumulation Trigger Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 Unused X Bit 1 R TBDA X Bit 0 R SYSCLKA X This register provides activity monitoring on FREEDM-8 clock inputs and BERT port input. When a monitored input makes a low to high transition, the corresponding register bit is set high. The bit will remain high until this register is read, at which point, all the bits in this register are cleared. A lack of transitions is indicated by the corresponding register bit reading low. This register should be read periodically to detect for stuck at conditions. Writing to this register delimits the accumulation intervals in the PMON accumulation registers. Counts accumulated in those registers are transferred to holding registers where they can be read. The counters themselves are then cleared to begin accumulating events for a new accumulation interval. The bits in this register are not affected by write accesses. 87 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Note This register is not byte addressable. Reading this register clears all the activity bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. SYSCLKA: The system clock active bit (SYSCLKA) monitors for low to high transitions on the SYSCLK input. SYSCLKA is set high on a rising edge of SYSCLK, and is set low when this register is read. TBDA: The transmit BERT data active bit (TBDA) monitors for low to high transitions on the TBD input. TBDA is set high on a rising edge of TDB, and is set low when this register is read. 88 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x010 : FREEDM-8 Master Link Activity Monitor Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 R TLGA[1] X Bit 8 R TLGA[0] X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 Unused X Bit 1 R RLGA[1] X Bit 0 R RLGA[0] X This register provides activity monitoring on FREEDM-8 receive and transmit link inputs. When a monitored input makes a low to high transition, the corresponding register bit is set high. The bit will remain high until this register is read, at which point, all the bits in this register are cleared. A lack of transitions is indicated by the corresponding register bit reading low. This register should be read at periodically to detect for stuck at conditions. Note This register is not byte addressable. Reading this register clears all the activity bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. 89 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER RLGA[0]: The receive link group #0 active bit (RLGA[0]) monitors for transitions on the RD[3:0] and RCLK[3:0] inputs. RLGA[0] is set high when each of RD[3:0] has been sampled low and sampled high by rising edges of the corresponding RCLK[3:0] inputs, and is set low when this register is read. RLGA[1]: The receive link group #1 active bit (RLGA[1]) monitors for transitions on the RD[7:4] and RCLK[7:4] inputs. RLGA[1] is set high when each of RD[7:4] has been sampled low and sampled high by rising edges of the corresponding RCLK[7:4] inputs, and is set low when this register is read. TLGA[0]: The transmit link group #0 active bit (TLGA[0]) monitors for low to high transitions on the TCLK[3:0] inputs. TLGA[0] is set high when rising edges have been observed on all the signals on the TCLK[3:0] inputs, and is set low when this register is read. TLGA[1]: The transmit link group #1 active bit (TLGA[1]) monitors for low to high transitions on the TCLK[7:4] inputs. TLGA[1] is set high when rising edges have been observed on all the signals on the TCLK[7:4] inputs, and is set low when this register is read. 90 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x014 : FREEDM-8 Master Line Loopback Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W Reserved[7] 0 Bit 14 R/W Reserved[6] 0 Bit 13 R/W Reserved[5] 0 Bit 12 R/W Reserved[4] 0 Bit 11 R/W Reserved[3] 0 Bit 10 R/W Reserved[2] 0 Bit 9 R/W Reserved[1] 0 Bit 8 R/W Reserved[0] 0 Bit 7 R/W LLBEN[7] 0 Bit 6 R/W LLBEN[6] 0 Bit 5 R/W LLBEN[5] 0 Bit 4 R/W LLBEN[4] 0 Bit 3 R/W LLBEN[3] 0 Bit 2 R/W LLBEN[2] 0 Bit 1 R/W LLBEN[1] 0 Bit 0 R/W LLBEN[0] 0 This register controls line loopback for links #0 to #7. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. LLBEN[7:0]: The line loopback enable bits (LLBEN[7:0]) controls line loopback for links #7 to #0. When LLBEN[n] is set high, the data on RD[n] is passed verbatim to TD[n] which is then updated on the falling edge of RCLK[n]. TCLK[n] is ignored. When LLBEN[n] is set low, TD[n] is processed normally. 91 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Reserved[7:0]: The reserved bits (Reserved[7:0]) must be set low for the correct operation of the FREEDM-8 device. 92 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x020 : FREEDM-8 Master BERT Control Bit Type Function Default Unused XXXXH TBEN 0 Bit 14 Unused X Bit 13 Unused X Bit 31 to Bit 16 Bit 15 R/W Bit 12 R/W Reserved[3] 0 Bit 11 R/W Reserved[2] 0 Bit 10 R/W TBSEL[2] 0 Bit 9 R/W TBSEL[1] 0 Bit 8 R/W TBSEL[0] 0 Bit 7 R/W RBEN 0 Bit 6 Unused X Bit 5 Unused X Bit 4 R/W Reserved[1] 0 Bit 3 R/W Reserved[0] 0 Bit 2 R/W RBSEL[2] 0 Bit 1 R/W RBSEL[1] 0 Bit 0 R/W RBSEL[0] 0 This register controls the bit error rate testing of the receive and transmit links. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RBSEL[2:0]: The receive bit error rates testing link select bits (RBSEL[2:0]) controls the source of data on the RBD and RBCLK outputs when receive bit error rate testing is enabled (RBEN set high). RBSEL[2:0] is a binary number that selects a receive link (RD[7:0]/RCLK[7:0]) to be the source of data for RBD and RBCLK outputs. RBSEL[2:0] is ignored when RBEN is set low. 93 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER RBEN: The receive bit error rates testing link enable bit (RBEN) controls the receive bit error rate testing port. When RBEN is set high, RBSEL[2:0] is a binary number that selects a receive link (RD[7:0]/RCLK[7:0]) to be the source of data for RBD and RBCLK outputs. When RBEN is set low, RBD and RBCLK are held tri-stated. TBSEL[2:0]: The transmit bit error rates testing link select bits (TBSEL[2:0]) controls the over-writing of transmit data on TD[7:0] by data on TBD when transmit bit error rate testing is enabled (TBEN set high) and the selected link is not in line loopback (LLBEN[n] set low). TBSEL[2:0] is a binary number that selects a transmit link (TD[7:0]/TCLK[7:0]) to carry the data on TBD. The TBCLK output is a buffered version of the selected one of TCLK[7:0]. TBSEL[2:0] is ignored when TBEN is set low. TBEN: The transmit bit error rates testing link enable bit (TBEN) controls the transmit bit error rate testing port. When TBEN is set high and the associated link in not in line loopback (LLBEN set low), TBSEL[2:0] is a binary number that selects a transmit link data output (TD[7:0]) to carry the data on TBD and selects a transmit link clock (TCLK[7:0]) as the source of TBCLK. When TBEN is set low, all transmit links are processed normally and TBCLK is held tri-stated. Reserved[3:0]: The reserved bits (Reserved[3:0]) must be set low for the correct operation of the FREEDM-8 device. 94 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x024 : FREEDM-8 Master Performance Monitor Control Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 R/W TP2EN 0 Bit 13 R/W TABRT2EN 0 Bit 12 R/W RP2EN 0 Bit 11 R/W RLENE2EN 0 Bit 10 R/W RABRT2EN 0 Bit 9 R/W RFCSE2EN 0 Bit 8 R/W RSPE2EN 0 Unused X Bit 7 Bit 6 R/W TP1EN 0 Bit 5 R/W TABRT1EN 0 Bit 4 R/W RP1EN 0 Bit 3 R/W RLENE1EN 0 Bit 2 R/W RABRT1EN 0 Bit 1 R/W RFCSE1EN 0 Bit 0 R/W RSPE1EN 0 This register configures the events that are accumulated in the two configurable performance monitor counters in the PMON block. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RSPE1EN: The receive small packet error accumulate enable bit (RSPE1EN) enables counting of minimum packet size violation events. When RSPE1EN is set high, receipt of a packet that is shorter than 32 bits (CRC-CCITT, Unspecified CRC or no CRC) or 48 bits (CRC-32) will 95 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER cause the PMON Configurable Accumulator #1 register to increment. Small packet errors are ignored when RSPE1EN is set low. RFCSE1EN: The receive frame check sequence error accumulate enable bit (RFCSE1EN) enables counting of receive FCS error events. When RFCSE1EN is set high, a mismatch between the received FCS code and the computed CRC residue will cause the PMON Configurable Accumulator #1 register to increment. Receive frame check sequence errors are ignored when RFCSE1EN is set low. RABRT1EN: The receive abort accumulate enable bit (RABRT1EN) enables counting of receive HDLC abort events. When RABRT1EN is set high, receipt of an abort code (at least 7 contiguous 1's) will cause the PMON Configurable Accumulator #1 register to increment. Receive aborts are ignored when RABRT1EN is set low. RLENE1EN: The receive packet length error accumulate enable bit (RLENE1EN) enables counting of receive packet length error events. When RLENE1EN is set high, receipt of a packet that is longer than the programmable maximum or of a packet that in not octet aligned will cause the PMON Configurable Accumulator #1 register to increment. Receive packet length errors are ignored when RLENE1EN is set low. RP1EN: The receive packet enable bit (RP1EN) enables counting of receive error-free packets. When RP1EN is set high, receipt of an error-free packet will cause the PMON Configurable Accumulator #1 register to increment. Receive error-free packets are ignored when RP1EN is set low. TABRT1EN: The transmit abort accumulate enable bit (TABRT1EN) enables counting of transmit HDLC abort events. When TABRT1EN is set high, insertion of an abort in the outgoing stream will cause the PMON Configurable Accumulator #1 register to increment. Transmit aborts are ignored when TABRT1EN is set low. TP1EN: The transmit packet enable bit (TP1EN) enables counting of transmit error-free packets. When TP1EN is set high, transmission of an error-free packet will cause the PMON Configurable Accumulator #1 register to increment. Transmit error-free packets are ignored when TP1EN is set low. RSPE2EN: The receive small packet error accumulate enable bit (RSPE2EN) enables counting of minimum packet size violation events. When RSPE2EN is set high, receipt of a packet that is 96 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER shorter than 32 bits (CRC-CCITT, Unspecified CRC or no CRC) or 48 bits (CRC-32) will cause the PMON Configurable Accumulator #2 register to increment. Small packet errors are ignored when RSPE2EN is set low. RFCSE2EN: The receive frame check sequence error accumulate enable bit (RFCSE2EN) enables counting of receive FCS error events. When RFCSE2EN is set high, a mismatch between the received FCS code and the computed CRC residue will cause the PMON Configurable Accumulator #2 register to increment. Receive frame check sequence errors are ignored when RFCSE2EN is set low. RABRT2EN: The receive abort accumulate enable bit (RABRT2EN) enables counting of receive HDLC abort events. When RABRT2EN is set high, receipt of an abort code (at least 7 contiguous 2's) will cause the PMON Configurable Accumulator #2 register to increment. Receive aborts are ignored when RABRT2EN is set low. RLENE2EN: The receive packet length error accumulate enable bit (RLENE2EN) enables counting of receive packet length error events. When RLENE2EN is set high, receipt of a packet that is longer than the programmable maximum or of a packet that in not octet aligned will cause the PMON Configurable Accumulator #2 register to increment. Receive packet length errors are ignored when RLENE2EN is set low. RP2EN: The receive packet enable bit (RP2EN) enables counting of receive error-free packets. When RP2EN is set high, receipt of an error-free packet will cause the PMON Configurable Accumulator #2 register to increment. Receive error-free packets are ignored when RP2EN is set low. TABRT2EN: The transmit abort accumulate enable bit (TABRT2EN) enables counting of transmit HDLC abort events. When TABRT2EN is set high, insertion of an abort in the outgoing stream will cause the PMON Configurable Accumulator #2 register to increment. Transmit aborts are ignored when TABRT2EN is set low. TP2EN: The transmit packet enable bit (TP2EN) enables counting of transmit error-free packets. When TP2EN is set high, transmission of an error-free packet will cause the PMON Configurable Accumulator #2 register to increment. Transmit error-free packets are ignored when TP2EN is set low. 97 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x040 : GPIC Control Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 R/W RPWTH[4] 0 Bit 11 R/W RPWTH[3] 0 Bit 10 R/W RPWTH[2] 0 Bit 9 R/W RPWTH[1] 0 Bit 8 R/W RPWTH[0] 0 Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 R/W PONS_E 0 Bit 2 R/W SOE_E 0 Bit 1 R/W LENDIAN 1 Bit 0 R/W Reserved 0 This register configures the operation of the GPIC. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. Reserved: The Reserved bit must be set low for correct operation of the FREEDM. LENDIAN: The Little Endian mode bit (LENDIAN) selects between Big Endian or Little Endian format when reading packet data from and writing packet data to PCI host memory. When LENDIAN 98 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER is set low, Big Endian format is selected. When LENDIAN is set high, Little Endian format is selected. Descriptor references and the contents of descriptors are always transferred in Little Endian Format. Please refer below for each format's byte ordering. Table 16 - Big Endian Format 00 DWORD Address Bit 31 04 n-4 24 23 16 15 8 7 Bit 0 BYTE 0 BYTE 1 BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTE 6 BYTE 7 * * * * * * * * * * * * BYTE n-4 BYTE n-3 BYTE n-2 BYTE n-1 Table 17 - Little Endian Format 00 DWORD Address 04 n-4 Bit 31 24 23 16 15 8 7 Bit 0 BYTE 3 BYTE 2 BYTE 1 BYTE 0 BYTE 7 BYTE 6 BYTE 5 BYTE 4 * * * * * * * * * * * * BYTE n-1 BYTE n-2 BYTE n-3 BYTE n-4 SOE_E: The stop on error enable (SOE_E) bit determines the action the PCI controller will take when a system or parity error occurs. When set high the PCI controller will disconnect the PCI REQB signal from the PCI bus. This prevents the GPIC from the becoming a master device on the PCI bus in event of one of the following bits in the PCI Configuration Command/Status register being set: DPR, RTABT, MABT and SERR. When the SOE_E bit is set low the PCI controller will continue to allow master transactions on the PCI bus. Setting this bit low after an error has occurred or clearing the appropriate bit the PCI Configuration Command/Status register will reactivate the PCI REQB signal and allow the GPIC to resume servicing the local masters. In the event of a system or parity error it is recommended that the core device be reset unless the cause of the fault can be determined. PONS_E: The Report PERR on SERR enable (PONS_E) bit controls the source of system errors. When set high all parity errors will be signaled to the host via the SERRB output signal. 99 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER RPWTH[4:0]: The Receive Packet Write Threshold bits (RPWTH[4:0]) controls the amount of data in the write FIFO before the GPIC begins arbitrating for the bus. The GPIC will begin requesting access to the PCI bus when the number of dwords of packet data loaded by the RMAC reaches the threshold specified by RPWTH[4:0]. 100 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x100 : RCAS Indirect Link and Time-slot Select Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R BUSY X Bit 14 R/W RWB 0 Unused X Bit 13 Bit 12 R/W Reserved[1] 0 Bit 11 R/W Reserved[0] 0 Bit 10 R/W LINK[2] 0 Bit 9 R/W LINK[1] 0 Bit 8 R/W LINK[0] 0 Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 R/W TSLOT[4] 0 Bit 3 R/W TSLOT[3] 0 Bit 2 R/W TSLOT[2] 0 Bit 1 R/W TSLOT[1] 0 Bit 0 R/W TSLOT[0] 0 This register provides the receive link and time-slot number used to access the channel provision RAM. Writing to this register triggers an indirect register access. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TSLOT[4:0]: The indirect time-slot number bits (TSLOT[4:0]) indicate the time-slot to be configured or interrogated in the indirect access. For a channelised T1 link, time-slots 1 to 24 are valid. For a channelised E1 link, time-slots 1 to 31 are valid. For unchannelised links, only time-slot 0 is valid. 101 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER LINK[2:0]: The indirect link number bits (LINK[2:0]) select amongst the 8 receive links to be configured or interrogated in the indirect access. RWB: The indirect access control bit (RWB) selects between a configure (write) or interrogate (read) access to the channel provision RAM. The address to the channel provision RAM is constructed by concatenating the TSLOT[4:0] and LINK[2:0] bits. Writing a logic zero to RWB triggers an indirect write operation. Data to be written is taken from the PROV, the CDLBEN and the CHAN[6:0] bits of the RCAS Indirect Channel Data register. Writing a logic one to RWB triggers an indirect read operation. Addressing of the RAM is the same as in an indirect write operation. The data read can be found in the PROV, the CDLBEN and the CHAN[6:0] bits of the RCAS Indirect Channel Data register. BUSY: The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set high when this register is written to trigger an indirect access, and will stay high until the access is complete. At which point, BUSY will be set low. This register should be polled to determine when data from an indirect read operation is available in the RCAS Indirect Channel Data register or to determine when a new indirect write operation may commence. Reserved[1:0]: The reserved bits (Reserved[1:0]) must be set low for the correct operation of the FREEDM-8 device. 102 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x104 : RCAS Indirect Channel Data Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 R/W CDLBEN 0 Bit 8 R/W PROV 0 Unused X Bit 7 Bit 6 R/W CHAN[6] 0 Bit 5 R/W CHAN[5] 0 Bit 4 R/W CHAN[4] 0 Bit 3 R/W CHAN[3] 0 Bit 2 R/W CHAN[2] 0 Bit 1 R/W CHAN[1] 0 Bit 0 R/W CHAN[0] 0 This register contains the data read from the channel provision RAM after an indirect read operation or the data to be inserted into the channel provision RAM in an indirect write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CHAN[6:0]: The indirect data bits (CHAN[6:0]) report the channel number read from the channel provision RAM after an indirect read operation has completed. Channel number to be written to the channel provision RAM in an indirect write operation must be set up in this register before 103 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER triggering the write. CHAN[6:0] reflects the value written until the completion of a subsequent indirect read operation. PROV: The indirect provision enable bit (PROV) reports the channel provision enable flag read from the channel provision RAM after an indirect read operation has completed. The provision enable flag to be written to the channel provision RAM, in an indirect write operation, must be set up in this register before triggering the write. When PROV is set high, the current receive data byte is processed as part of the channel as indicated by CHAN[6:0]. When PROV is set low, the current time-slot does not belong to any channel and the receive data byte ignored. PROV reflects the value written until the completion of a subsequent indirect read operation. CDLBEN: The indirect channel based diagnostic loopback enable bit (CDLBEN) reports the loopback enable flag read from channel provision RAM after an indirect read operation has complete. The loopback enable flag to be written to the channel provision RAM, in an indirect write operation, must be set up in this register before triggering the write. When CDLBEN is set high, the current receive data byte is to be over-written by data retrieved from the loopback FIFO of the channel as indicated by CHAN[6:0]. When CDLBEN is set low, the current receive data byte is processed normally. CDLBEN reflects the value written until the completion of a subsequent indirect read operation. 104 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x108 : RCAS Framing Bit Threshold Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 R/W FTHRES[6] 0 Bit 5 R/W FTHRES[5] 1 Bit 4 R/W FTHRES[4] 1 Bit 3 R/W FTHRES[3] 1 Bit 2 R/W FTHRES[2] 1 Bit 1 R/W FTHRES[1] 1 Bit 0 R/W FTHRES[0] 1 This register contains the threshold used by the clock activity monitor to detect for framing bits/bytes. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. FTHRES[6:0]: The framing bit threshold bits (FTHRES[6:0]) contains the threshold used by the clock activity monitor to detect for the presence of framing bits. A counter in the clock activity monitor of each receive link increments at each SYSCLK and is cleared, when the BSYNC bit of that link is set low, by each rising edge of the corresponding RCLK[n]. When the BSYNC bit of that link 105 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER is set high, the counter is cleared at every fourth rising edge of the corresponding RCLK[n]. When the counter exceeds the threshold given by FTHRES[6:0], a framing bit/byte has been detected. FTHRES[6:0] should be set as a function of the SYSCLK period and the expected gapping width of RCLK[n] during data bits and during framing bits/bytes. Legal range of FTHRESH[6:0] is 'b0000001 to 'b1111110. Note: For operation with T1 links and SYSCLK = 33 MHz, FTHRESH[6:0] should be set to `b0011111'. The default value of this register is inconsistent with that of the TCAS Framing Bit Threshold register 0x408. 106 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x10C : RCAS Channel Disable Bit Type Function Default Unused XXXXH CHDIS 0 Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 31 to Bit 16 Bit 15 R/W Bit 6 R/W DCHAN[6] 0 Bit 5 R/W DCHAN[5] 0 Bit 4 R/W DCHAN[4] 0 Bit 3 R/W DCHAN[3] 0 Bit 2 R/W DCHAN[2] 0 Bit 1 R/W DCHAN[1] 0 Bit 0 R/W DCHAN[0] 0 This register controls the disabling of one specific channel to allow orderly provisioning of timeslots associated with that channel. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. DCHAN[6:0]: The disable channel number bits (DCHAN[6:0]) selects the channel to be disabled. When CHDIS is set high, the channel specified by DCHAN[6:0] is disabled. Data in timeslots associated with the specified channel is ignored. When CHDIS is set low, the channel specified by DCHAN[6:0] operates normally. 107 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CHDIS: The channel disable bit (CHDIS) controls the disabling of the channels specified by DCHAN[6:0]. When CHDIS is set high, the channel selected by DCHAN[6:0] is disabled. Data in timeslots associated with the specified channel is ignored. When CHDIS is set low, the channel specified by DCHAN[6:0] operates normally. 108 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x180 : RCAS Link #0 Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 R/W BSYNC 0 Bit 1 R/W E1 0 Bit 0 R/W CEN 0 This register configures operational modes of receive link #0 (RD[0] / RCLK[0]). Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CEN: The channelise enable bit (CEN) configures receive link #0 for channelised operation. RCLK[0] is held quiescent during the T1 framing bit and during the E1 framing bytes. The data bit on RD[0] clocked in by the first rising edge of RCLK[0] after an extended quiescent period is considered to be the most significant bit of time-slot 1. When CEN is set low, receive link #0 is unchannelised. The E1 register bit is ignored. RCLK[0] is gapped during non-data bytes. 109 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The choice between treating all data bits as a contiguous stream with arbitrary byte alignment or byte aligned to gaps in RCLK[0] is controlled by the BSYNC bit. E1: The E1 frame structure select bit (E1) configures receive link #0 for channelised E1 operation when CEN is set high. RCLK[0] is held quiescent during the FAS and NFAS framing bytes. The data bit on RD[0] associated with the first rising edge of RCLK[0] after an extended quiescent period is considered to be the most significant bit of time-slot 1. Link data is present at time-slots 1 to 31. When E1 is set low and CEN is set high, receive link #0 is configured for channelised T1 operation. RCLK[0] is held quiescent during the framing bit. The data bit on RD[0] associated with the first rising edge of RCLK[0] after an extended quiescent period is considered to be the most significant bit of time-slot 1. Link data is present at time-slots 1 to 24. E1 is ignored when CEN is set low. BSYNC: The byte synchronisation enable bit (BSYNC) controls the interpretation of gaps in RCLK[0] when link #0 is in unchannelised mode (CEN set low). When BSYNC is set high, the data bit on RD[0] clocked in by the first rising edge of RCLK[0] after an extended quiescent period is considered to be the most significant bit of a data byte. When BSYNC is set low, gaps in RCLK[0] carry no special significance. BSYNC is ignore when CEN is set high. 110 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x184 - 0x188 : RCAS Link #1 to #2 Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 R/W BSYNC 0 Bit 1 R/W E1 0 Bit 0 R/W CEN 0 This register set configures operational modes of receive link #1 to link #2 (RD[n] / RCLK[n]; where 1 n 2). Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CEN: The channelise enable bit (CEN) configures the corresponding receive link for channelised operation. RCLK[n] is held quiescent during the T1 framing bit and during the E1 framing bytes. The data bit on RD[n] clocked in by the first rising edge of RCLK[n] after an extended quiescent period is considered to be the most significant bit of time-slot 1. When CEN is set 111 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER low, receive link #n is unchannelised. The E1 register bit is ignored. RCLK[n] is gapped during non-data bytes. The choice between treating all data bits as a contiguous stream with arbitrary byte alignment or byte aligned to gaps in RCLK[n] is controlled by the BSYNC bit. E1: The E1 frame structure select bit (E1) configures the corresponding receive link for channelised E1 operation when CEN is set high. RCLK[n] is held quiescent during the FAS and NFAS framing bytes. The data bit on RD[n] associated with the first rising edge of RCLK[n] after an extended quiescent period is considered to be the most significant bit of time-slot 1. Link data is present at time-slots 1 to 31. When E1 is set low and CEN is set high, the corresponding receive link is configured for channelised T1 operation. RCLK[n] is held quiescent during the framing bit. The data bit on RD[n] associated with the first rising edge of RCLK[n] after an extended quiescent period is considered to be the most significant bit of time-slot 1. Link data is present at time-slots 1 to 24. E1 is ignored when CEN is set low. BSYNC: The byte synchronisation enable bit (BSYNC) controls the interpretation of gaps in RCLK[n] when the corresponding link is in unchannelised mode (CEN set low). When BSYNC is set high, the data bit on RD[n] clocked in by the first rising edge of RCLK[n] after an extended quiescent period is considered to be the most significant bit of a data byte. When BSYNC is set low, gaps in RCLK[n] carry no special significance. BSYNC is ignore when CEN is set high. 112 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x18C : RCAS Link #3 Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 Unused X Bit 1 R/W E1 0 Bit 0 R/W CEN 0 This register set configures operational modes of receive link #3 (RD[3] / RCLK[3]). Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CEN: The channelise enable bit (CEN) configures receive link #3 for channelised operation. RCLK[3] is held quiescent during the T1 framing bit and the E1 framing bytes. The data bit on RD[3] clocked in by the first rising edge of RCLK[3] after an extended quiescent period is considered to be the most significant bit of time-slot 1. When CEN is set low, the corresponding receive link is unchannelised. The E1 register bit is ignored. RCLK[3] is 113 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER gapped during non-data bytes. All data bits are treated as a contiguous stream with arbitrary byte alignment. E1: The E1 frame structure select bit (E1) configures receive link #3 for channelised E1 operation when CEN is set high. RCLK[3] is held quiescent during the FAS and NFAS framing bytes. The data bit on RD[3] clocked in by the first rising edge of RCLK[3] after an extended quiescent period is considered to be the most significant bit of time-slot 1. Link data is present at time-slots 1 to 31. When E1 is set low and CEN is set high, receive link #3 is configured for channelised T1 operation. RCLK[3] is held quiescent during the framing bit. The data bit on RD[3] clocked in by the first rising edge of RCLK[3] after an extended quiescent period is considered to be the most significant bit of time-slot 1. Link data is present at time-slots 1 to 24. E1 is ignored when CEN is set low. 114 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x190-0x19C : RCAS Link #4 to Link #7 Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 Unused X Bit 1 R/W E1 0 Bit 0 R/W CEN 0 This register set configures operational modes of receive link #4 to link # 7 (RD[n] / RCLK[n]; where 4 n 7 ). Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CEN: The channelise enable bit (CEN) configures the corresponding receive link for channelised operation. RCLK[n] is held quiescent during the T1 framing bit and the E1 framing bytes. The data bit on RD[n] clocked in by the first rising edge of RCLK[n] after an extended quiescent period is considered to be the most significant bit of time-slot 1. When CEN is set low, the 115 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER corresponding receive link is unchannelised. The E1 register bit is ignored. RCLK[n] is gapped during non-data bytes. All data bits are treated as a contiguous stream with arbitrary byte alignment. E1: The E1 frame structure select bit (E1) configures the corresponding receive link for channelised E1 operation when CEN is set high. RCLK[n] is held quiescent during the FAS and NFAS framing bytes. The data bit on RD[n] clocked in by the first rising edge of RCLK[n] after an extended quiescent period is considered to be the most significant bit of time-slot 1. Link data is present at time-slots 1 to 31. When E1 is set low and CEN is set high, the corresponding receive link is configured for channelised T1 operation. RCLK[n] is held quiescent during the framing bit. The data bit on RD[n] clocked in by the first rising edge of RCLK[n] after an extended quiescent period is considered to be the most significant bit of time-slot 1. Link data is present at time-slots 1 to 24. E1 is ignored when CEN is set low. 116 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x200 : RHDL Indirect Channel Select Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R BUSY X Bit 14 R/W CRWB 0 Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 R/W CHAN[6] 0 Bit 5 R/W CHAN[5] 0 Bit 4 R/W CHAN[4] 0 Bit 3 R/W CHAN[3] 0 Bit 2 R/W CHAN[2] 0 Bit 1 R/W CHAN[1] 0 Bit 0 R/W CHAN[0] 0 This register provides the channel number used to access the receive channel provision RAM. Writing to this register triggers an indirect channel register access. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CHAN[6:0]: The indirect channel number bits (CHAN[6:0]) indicate the receive channel to be configured or interrogated in the indirect access. 117 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CRWB: The channel indirect access control bit (CRWB) selects between a configure (write) or interrogate (read) access to the receive channel provision RAM. Writing a logic zero to CRWB triggers an indirect write operation. Data to be written is taken from the Indirect Channel Data registers. Writing a logic one to CRWB triggers an indirect read operation. The data read can be found in the Indirect Channel Data registers. BUSY: The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set high when this register is written to trigger an indirect access, and will stay high until the access is complete. At which point, BUSY will be set low. This register should be polled to determine when data from an indirect read operation is available in the RHDL Indirect Channel Data #1 and #2 registers or to determine when a new indirect write operation may commence. 118 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x204 : RHDL Indirect Channel Data Register #1 Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W PROV 0 Bit 14 R/W CRC[1] 0 Bit 13 R/W CRC[0] 0 Bit 12 R/W STRIP 0 Bit 11 R/W DELIN 0 Bit 10 R TAVAIL X Unused X Bit 9 Bit 8 W FPTR[8] X Bit 7 W FPTR[7] X Bit 6 W FPTR[6] X Bit 5 W FPTR[5] X Bit 4 W FPTR[4] X Bit 3 W FPTR[3] X Bit 2 W FPTR[2] X Bit 1 W FPTR[1] X Bit 0 W FPTR[0] X This register contains data read from the channel provision RAM after an indirect read operation or data to be inserted into the channel provision RAM in an indirect write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. FPTR[8:0]: The indirect FIFO block pointer (FPTR[8:0]) identifies one of the blocks of the circular linked list in the partial packet buffer used in the logical FIFO of the current channel. The FIFO pointer to be written to the channel provision RAM, in an indirect write operation, must be set 119 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER up in this register before triggering the write. The FIFO pointer value can be any one of the blocks provisioned to form the circular buffer. TAVAIL: The indirect transaction available bit (TAVAIL) reports the fill level of the partial packet buffer used in the logical FIFO of the current channel. TAVAIL is set high when the FIFO of the current channel contains sufficient data, as controlled by XFER[2:0], to request a DMA transfer to the host memory. TAVAIL is set low when the amount of receive data is too small to require a transfer to host memory. TAVAIL is update by an indirect channel read operation. DELIN: The indirect delineate enable bit (DELIN) configures the HDLC processor to perform flag sequence delineation and bit de-stuffing on the incoming data stream. The delineate enable bit to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When DELIN is set high, flag sequence delineation and bit de-stuffing is performed on the incoming data stream. When DELIN is set low, the HDLC processor does not perform any processing (flag sequence delineation, bit destuffing nor CRC verification) on the incoming stream. DELIN reflects the value written until the completion of a subsequent indirect channel read operation. STRIP: The indirect frame check sequence discard bit (STRIP) configures the HDLC processor to remove the CRC from the incoming frame when writing the data to the channel FIFO. The FCS discard bit to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When STRIP is set high and CRC[1:0] is not equal to "00", the received CRC value is not written to the FIFO. When STRIP is set low, the received CRC value is written to the FIFO. The bytes in buffer field of the RPD correctly reflect the presence/absence of CRC bytes in the buffer. The value of STRIP is ignored when DELIN is low. STRIP reflects the value written until the completion of a subsequent indirect channel read operation. CRC[1:0]: The CRC algorithm bits (CRC[1:0]) configures the HDLC processor to perform CRC verification on the incoming data stream. The value of CRC[1:0] to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. CRC[1:0] is ignored when DELIN is low. CRC[1:0] reflects the value written until the completion of a subsequent indirect channel read operation. Table 18 - CRC[1:0] Settings CRC[1] CRC[0] Operation 0 0 No Verification 0 1 CRC-CCITT 120 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CRC[1] CRC[0] Operation 1 0 CRC-32 1 1 Reserved PROV: The indirect provision enable bit (PROV) reports the channel provision enable flag read from the channel provision RAM after an indirect channel read operation has completed. The provision enable flag to be written to the channel provision RAM, in an indirect write operation, must be set up in this register before triggering the write. When PROV is set high, the HDLC processor will process data on the channel specified by CHAN[6:0]. When PROV is set low, the HDLC processor will ignore data on the channel specified by CHAN[6:0]. PROV reflects the value written until the completion of a subsequent indirect channel read operation. 121 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x208 : RHDL Indirect Channel Data Register #2 Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W 7BIT 0 Bit 14 R/W PRIORITY 0 Bit 13 R/W INVERT 0 Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 R/W OFFSET[1] 0 Bit 8 R/W OFFSET[0] 0 Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused[ X Bit 3 Unused X Bit 2 R/W XFER[2] X Bit 1 R/W XFER[1] 0 Bit 0 R/W XFER[0] 0 This register contains data read from the channel provision RAM after an indirect read operation or data to be inserted into the channel provision RAM in an indirect write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. XFER[2:0]: The indirect channel transfer size (XFER[2:0]) configures the amount of data transferred in each transaction. The channel transfer size to be written to the channel provision RAM, in an indirect write operation, must be set up in this register before triggering the write. When the channel FIFO depth reaches the depth specified by XFER[2:0] or when an end-of-packet 122 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER exists in the FIFO, a request will be made to the RMAC to initiate a PCI write access to transfer the data to the PCI host. Channel transfer size is measured in 16 byte blocks. The amount of data transferred and the depth threshold are specified by given setting is: XFER[2:0] + 1 blocks = 16 * (XFER[2:0] + 1) bytes XFER[2:0] should be set such that the number of blocks transferred is at least two fewer than the total allocated to the associated channel. XFER[2:0] reflects the value written until the completion of a subsequent indirect channel read operation. OFFSET[1:0]: The packet byte offset (OFFSET[1:0]) configures the partial packet processor to insert invalid bytes at the beginning of a packet stored in the channel FIFO. The value of OFFSET[1:0] to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. The number of bytes inserted before the beginning of a HDLC packet is defined by the binary value of OFFSET[1:0]. OFFSET[1:0] reflects the value written until the completion of a subsequent indirect channel read operation. INVERT: The HDLC data inversion bit (INVERT) configures the HDLC processor to logically invert the incoming HDLC stream from the RCAS before processing it. The value of INVERT to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When INVERT is set to one, the HDLC stream is logically inverted before processing. When INVERT is set to zero, the HDLC stream is not inverted before processing. INVERT reflects the value written until the completion of a subsequent indirect channel read operation. PRIORITY: The channel FIFO priority bit (PRIORITY) informs the partial packet processor that the channel has precedence over other channels when being serviced by the RMAC block for transfer to the PCI host. The value of PRIORITY to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. Channel FIFOs with PRIORITY set to one are serviced by the RMAC before channel FIFOs with PRIORITY set to zero. Channels with an HDLC data rate to FIFO size ratio that is significantly higher than other channels should have PRIORITY set to one. PRIORITY reflects the value written until the completion of a subsequent indirect channel read operation. 7BIT: The 7BIT enable bit (7BIT) configures the HDLC processor to ignore the least significant bit of each octet in the corresponding link RD[n]. The value of 7BIT to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When 7BIT is set high, the least significant bit (last bit of each octet received), is ignored. When 7BIT is set low, the entire receive data stream is processed. 7BIT reflects the value written until the completion of a subsequent indirect channel read operation. 123 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x210 : RHDL Indirect Block Select Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R BUSY X Bit 14 R/W BRWB X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 R/W BLOCK[8] X Bit 7 R/W BLOCK[7] X Bit 6 R/W BLOCK[6] X Bit 5 R/W BLOCK[5] X Bit 4 R/W BLOCK[4] X Bit 3 R/W BLOCK[3] X Bit 2 R/W BLOCK[2] X Bit 1 R/W BLOCK[1] X Bit 0 R/W BLOCK[0] X This register provides the block number used to access the block pointer RAM. Writing to this register triggers an indirect block register access. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. BLOCK[8:0]: The indirect block number (BLOCK[8:0]) indicate the block to be configured or interrogated in the indirect access. 124 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER BRWB: The block indirect access control bit (BRWB) selects between a configure (write) or interrogate (read) access to the block pointer RAM. Writing a logic zero to BRWB triggers an indirect block write operation. Data to be written is taken from the Indirect Block Data register. Writing a logic one to BRWB triggers an indirect block read operation. The data read can be found in the Indirect Block Data register. BUSY: The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set high when this register is written to trigger an indirect access, and will stay high until the access is complete. At which point, BUSY will be set low. This register should be polled to determine when data from an indirect read operation is available in the RHDL Indirect Block Data register or to determine when a new indirect write operation may commence. 125 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x214 : RHDL Indirect Block Data Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 R/W BPTR[8] 0 Bit 7 R/W BPTR[7] 0 Bit 6 R/W BPTR[6] 0 Bit 5 R/W BPTR[5] 0 Bit 4 R/W BPTR[4] 0 Bit 3 R/W BPTR[3] 0 Bit 2 R/W BPTR[2] 0 Bit 1 R/W BPTR[1] 0 Bit 0 R/W BPTR[0] 0 This register contains data read from the block pointer RAM after an indirect block read operation or data to be inserted into the block pointer RAM in an indirect block write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. BPTR[8:0]: The indirect block pointer (BPTR[8:0]) configures the block pointer of the block specified by the Indirect Block Select register. The block pointer to be written to the block pointer RAM, in an indirect write operation, must be set up in this register before triggering the write. The block pointer value is the block number of the next block in the linked list. A circular list of 126 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER blocks must be formed in order to use the block list as a receive channel FIFO buffer. BPTR[8:0] reflects the value written until the completion of a subsequent indirect block read operation. When provisioning a channel FIFO, all blocks pointers must be re-written to properly initialize the FIFO. 127 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x220 : RHDL Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 R/W LENCHK 0 Bit 8 R/W TSTD 0 Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 R/W Reserved[2] 1 Bit 1 R/W Reserved[1] 1 Bit 0 R/W Reserved[0] 1 This register configures all provisioned receive channels. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. Reserved[2:0]: The reserved bits (Reserved[2:0]) must be set to all ones for correct operation of the FREEDM-8 device. 128 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER TSTD: The telecom standard bit (TSTD) controls the bit ordering of the HDLC data transferred to the PCI host. When TSTD is set low, the least significant bit of the each byte on the PCI bus (AD[0], AD[8], AD[16] and AD[24]) is the first HDLC bit received and the most significant bit of each byte (AD[7], AD[15], AD[23] and AD[31]) is the last HDLC bit received (datacom standard). When TSTD is set high, AD[0], AD[8], AD[16] and AD[24] are the last HDLC bit received and AD[7], AD[15], AD[23] and AD[31] are the first HDLC bit received (telecom standard). LENCHK: The packet length error check bit (LENCHK) controls the checking of receive packets that are longer than the maximum programmed length. When LENCHK is set high, receive packets are aborted and the remainder of the frame discarded when the packet exceeds the maximum packet length given by MAX[15:0]. When LENCHK is set low, receive packets are not checked for maximum size and MAX[15:0] must be set to 'hFFFF. 129 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x224 : RHDL Maximum Packet Length Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W MAX[15] 1 Bit 14 R/W MAX[14] 1 Bit 13 R/W MAX[13] 1 Bit 12 R/W MAX[12] 1 Bit 11 R/W MAX[11] 1 Bit 10 R/W MAX[10] 1 Bit 9 R/W MAX[9] 1 Bit 8 R/W MAX[8] 1 Bit 7 R/W MAX[7] 1 Bit 6 R/W MAX[6] 1 Bit 5 R/W MAX[5] 1 Bit 4 R/W MAX[4] 1 Bit 3 R/W MAX[3] 1 Bit 2 R/W MAX[2] 1 Bit 1 R/W MAX[1] 1 Bit 0 R/W MAX[0] 1 This register configures the maximum legal HDLC packet byte length. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. MAX[15:0]: The maximum HDLC packet length (MAX[15:0]) configures the FREEDM-8 to reject HDLC packets longer than a maximum size when LENCHK is set high. Receive packets with total length, including address, control, information and FCS fields, greater than MAX[15:0] bytes are aborted. When LENCHK is set low, aborts are not generated regardless of packet length and MAX[15:0] must be set to 'hFFFF. 130 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x280 : RMAC Control Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 R/W RPQ_SFN[1] 0 Bit 10 R/W RPQ_SFN[0] 0 Bit 9 R/W RPQ_LFN[1] 0 Bit 8 R/W RPQ_LFN[0] 0 Bit 7 R/W RPQ_RDYN[2] 0 Bit 6 R/W RPQ_RDYN[1] 0 Bit 5 R/W RPQ_RDYN[0] 0 Bit 4 R/W RAWMAX[1] 1 Bit 3 R/W RAWMAX[0] 1 Bit 2 R/W SCACHE 1 Bit 1 R/W LCACHE 1 Bit 0 R/W ENABLE 0 This register configures the RMAC block. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. ENABLE: The ENABLE bit determines whether or not the RMAC accepts data from the RHDL block and sends it to host memory. When set to 1, these tasks are enabled. When set to 0, they are disabled. 131 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER LCACHE: The large buffer cache enable bit (LCACHE) enables caching of Large Buffer RPDRs. When LCACHE is set high, RPDRs are fetched from the RPDR Large Buffer Free Queue in groups of up to six. When LCACHE is set low, RPDRs are fetched one at a time. SCACHE: The small buffer cache enable bit (SCACHE) enables caching of Small Buffer RPDRs. When SCACHE is set high, RPDRs are fetched from the RPDR Small Buffer Free Queue in groups of up to six. When SCACHE is set low, RPDRs are fetched one at a time. RAWMAX[1:0]: The RAWMAX[1:0] field determines how `raw' (i.e. non packet delimited) data is written to host memory. Raw data is written to buffers in host memory in the same manner as packet delimited data. Whenever RAWMAX[1:0] + 1 buffers have been filled, the resulting buffer chain is placed in the ready queue. RPQ_RDYN[2:0]: The RPQ_RDYN[2:0] field sets the number of receive packet descriptor references (RPDRs) that must be placed onto the RPDR ready queue before the RPDR ready interrupt (RPQRDYI) is asserted, as follows: Table 19 - RPQ_RDYN[2:0] settings RPQ_RDYN[2:0] No of RPDRs 000 1 001 4 010 6 011 8 100 16 101 32 110 Reserved 111 Reserved RPQ_LFN[1:0]: The RPQ_LFN[1:0] field sets the number of times that a block of RPDRs are read from the Large Buffer Free Queue to the RMACs internal cache before the RPDR Large Buffer Free Queue interrupt (RPQLFI) is asserted, as follows: 132 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 20 - RPQ_LFN[1:0] Settings RPQ_LFN[1:0] No of Reads 00 1 01 4 10 8 11 Reserved RPQ_SFN[1:0]: The RPQ_SFN[1:0] field sets the number of times that a block of RPDRs are read from the Small Buffer Free Queue to the RMACs internal cache before the RPDR Small Buffer Free Queue interrupt (RPQSFI) is asserted, as follows: Table 21 - RPQ_SFN[1:0] Settings RPQ_SFN[1:0] No of Reads 00 1 01 4 10 8 11 Reserved 133 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x284 : RMAC Indirect Channel Provisioning Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R BUSY X Bit 14 R/W RWB 0 Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 R/W PROV 1 Bit 6 R/W CHAN[6] 0 Bit 5 R/W CHAN[5] 0 Bit 4 R/W CHAN[4] 0 Bit 3 R/W CHAN[3] 0 Bit 2 R/W CHAN[2] 0 Bit 1 R/W CHAN[1] 0 Bit 0 R/W CHAN[0] 0 The Channel Provisioning Register is used to temporarily unprovision channels, and also to query the provision status of channels. Channel is permanently provisioned and can only be unprovisioned transiently. When a channel is unprovisioned, a partially received packet, if any, will be flushed and marked as unprovisioned in the RPDRR queue status field. The channel then returns to being provisioned automatically. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. 134 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CHAN[6:0]: The indirect data bits (CHAN[6:0]) report the channel number read from the RMAC internal memory after an indirect read operation has completed. Channel number to be written to the RMAC internal memory in an indirect write operation must be set up in this register before triggering the write. CHAN[6:0] reflects the value written until the completion of a subsequent indirect read operation. PROV: The indirect provision enable bit (PROV) reports the channel provision enable flag read from the RMAC internal memory after an indirect read operation has completed. The provision enable flag to be written to the RMAC internal memory, in an indirect write operation, must be set up in this register before triggering the write. When PROV is set high, the channel as indicated by CHAN[6:0] is provisioned. When PROV is set low, the channel indicated by CHAN[6:0] is unprovisioned temporarily. Any partially received packets are flushed and the status in the RPDRR queue is marked unprovisioned. The channel then returns to being provisioned and PROV will report a logic high at the next indirect read operation. PROV reflects the value written until the completion of a subsequent indirect read operation. RWB: The Read/Write Bar (RWB) bit selects between a provisioning/unprovisioning operation (write) or a query operation (read). Writing a logic 0 to RWB triggers the provisioning or unprovisioning of a channel as specified by CHAN[6:0] and PROV. Writing a logic 1 to RWB triggers a query of the channel specified by CHAN[6:0]. BUSY: The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set high when this register is written to trigger an indirect access, and will stay high until the access is complete. At which point, BUSY will be set low. This register should be polled to determine when data from an indirect read operation is available or to determine when a new indirect write operation may commence. 135 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x288 : RMAC Packet Descriptor Table Base LSW Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDTB[15] 0 Bit 14 R/W RPDTB[14] 0 Bit 13 R/W RPDTB[13] 0 Bit 12 R/W RPDTB[12] 0 Bit 11 R/W RPDTB[11] 0 Bit 10 R/W RPDTB[10] 0 Bit 9 R/W RPDTB[9] 0 Bit 8 R/W RPDTB[8] 0 Bit 7 R/W RPDTB[7] 0 Bit 6 R/W RPDTB[6] 0 Bit 5 R/W RPDTB[5] 0 Bit 4 R/W RPDTB[4] 0 Bit 3 R/W RPDTB[3] 0 Bit 2 R/W RPDTB[2] 0 Bit 1 R/W RPDTB[1] 0 Bit 0 R/W RPDTB[0] 0 This register provides the less significant word of the Receive Descriptor Table Base address. The contents of this register is held in a holding register until a write access to the companion RMAC Receive Descriptor Table Base MSW register. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. 136 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x28C : RMAC Packet Descriptor Table Base MSW Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDTB[31] 0 Bit 14 R/W RPDTB[30] 0 Bit 13 R/W RPDTB[29] 0 Bit 12 R/W RPDTB[28] 0 Bit 11 R/W RPDTB[27] 0 Bit 10 R/W RPDTB[26] 0 Bit 9 R/W RPDTB[25] 0 Bit 8 R/W RPDTB[24] 0 Bit 7 R/W RPDTB[23] 0 Bit 6 R/W RPDTB[22] 0 Bit 5 R/W RPDTB[21] 0 Bit 4 R/W RPDTB[20] 0 Bit 3 R/W RPDTB[19] 0 Bit 2 R/W RPDTB[18] 0 Bit 1 R/W RPDTB[17] 0 Bit 0 R/W RPDTB[16] 0 This register provides the more significant word of the Receive Descriptor Table Base address. The contents of the companion RMAC Receive Descriptor Table Base LSW register is held in a holding register until a write access to this register, at which point, the base address of the receive packet descriptor table is updated. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDTB[31:0]: The receive packet descriptor table base bits (RPDTB[31:0]) provides the base address of the Receive Packet Descriptor Table in PCI host memory. This register is initialised by the host. To 137 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER calculate the physical address of a RPD, the 14 bit RPD offset must be added to bits 31 to 4 of the Receive Packet Descriptor Table Base (RPDTB[31:4]). The table must be on a 16 byte boundary and thus the least significant four bits must be written to logic zero. 138 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x290 : RMAC Queue Base LSW Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RQB[15] 0 Bit 14 R/W RQB[14] 0 Bit 13 R/W RQB[13] 0 Bit 12 R/W RQB[12] 0 Bit 11 R/W RQB[11] 0 Bit 10 R/W RQB[10] 0 Bit 9 R/W RQB[9] 0 Bit 8 R/W RQB[8] 0 Bit 7 R/W RQB[7] 0 Bit 6 R/W RQB[6] 0 Bit 5 R/W RQB[5] 0 Bit 4 R/W RQB[4] 0 Bit 3 R/W RQB[3] 0 Bit 2 R/W RQB[2] 0 Bit 1 R/W RQB[1] 0 Bit 0 R/W RQB[0] 0 This register provides the less significant word of the Receive Queue Base address. The contents of this register is held in a holding register until a write access to the companion RMAC Receive Queue Base MSW register. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. 139 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x294 : RMAC Queue Base MSW Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RQB[31] 0 Bit 14 R/W RQB[30] 0 Bit 13 R/W RQB[29] 0 Bit 12 R/W RQB[28] 0 Bit 11 R/W RQB[27] 0 Bit 10 R/W RQB[26] 0 Bit 9 R/W RQB[25] 0 Bit 8 R/W RQB[24] 0 Bit 7 R/W RQB[23] 0 Bit 6 R/W RQB[22] 0 Bit 5 R/W RQB[21] 0 Bit 4 R/W RQB[20] 0 Bit 3 R/W RQB[19] 0 Bit 2 R/W RQB[18] 0 Bit 1 R/W RQB[17] 0 Bit 0 R/W RQB[16] 0 This register provides the more significant word of the Receive Queue Base address. The contents of the companion RMAC Receive Queue Base LSW register is held in a holding register until a write access to this register, at which point, the base address of the receive queue is updated. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RQB[31:0]: The receive queue base bits (RQB[31:0]) provides the base address of the Large Buffer RPDR Free, Small Buffer RPDR Free and RPDR Ready queues in PCI host memory. This 140 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER register is initialised by the host. To calculate the physical address of a particular receive queue element, the RQB bits are added with the appropriate queue start, end, read or write index registers to form the physical address. The base address must be dword aligned and thus the least significant two bits must be written to logic zero. 141 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x298 : RMAC Packet Descriptor Reference Large Buffer Free Queue Start Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRLFQS[15] 0 Bit 14 R/W RPDRLFQS[14] 0 Bit 13 R/W RPDRLFQS[13] 0 Bit 12 R/W RPDRLFQS[12] 0 Bit 11 R/W RPDRLFQS[11] 0 Bit 10 R/W RPDRLFQS[10] 0 Bit 9 R/W RPDRLFQS[9] 0 Bit 8 R/W RPDRLFQS[8] 0 Bit 7 R/W RPDRLFQS[7] 0 Bit 6 R/W RPDRLFQS[6] 0 Bit 5 R/W RPDRLFQS[5] 0 Bit 4 R/W RPDRLFQS[4] 0 Bit 3 R/W RPDRLFQS[3] 0 Bit 2 R/W RPDRLFQS[2] 0 Bit 1 R/W RPDRLFQS[1] 0 Bit 0 R/W RPDRLFQS[0] 0 This register provides the Packet Descriptor Reference Large Buffer Free Queue start address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRLFQS[15:0]: The receive packet descriptor reference (RPDR) large buffer free queue start bits (RPDRLFQS[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Large Buffer Free Queue start address. This register is initialised by the host. The physical start address of the RPDRLF queue is the sum of RPDRLFQS[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 142 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x29C : RMAC Packet Descriptor Reference Large Buffer Free Queue Write Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRLFQW[15] 0 Bit 14 R/W RPDRLFQW[14] 0 Bit 13 R/W RPDRLFQW[13] 0 Bit 12 R/W RPDRLFQW[12] 0 Bit 11 R/W RPDRLFQW[11] 0 Bit 10 R/W RPDRLFQW[10] 0 Bit 9 R/W RPDRLFQW[9] 0 Bit 8 R/W RPDRLFQW[8] 0 Bit 7 R/W RPDRLFQW[7] 0 Bit 6 R/W RPDRLFQW[6] 0 Bit 5 R/W RPDRLFQW[5] 0 Bit 4 R/W RPDRLFQW[4] 0 Bit 3 R/W RPDRLFQW[3] 0 Bit 2 R/W RPDRLFQW[2] 0 Bit 1 R/W RPDRLFQW[1] 0 Bit 0 R/W RPDRLFQW[0] 0 This register provides the Packet Descriptor Reference Large Buffer Free Queue write address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRLFQW[15:0]: The receive packet descriptor reference (RPDR) large buffer free queue write bits (RPDRLFQW[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Large Buffer Free Queue write pointer. This register is initialised by the host. The physical write address in the RPDRLF queue is the sum of RPDRLFQW[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 143 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2A0 : RMAC Packet Descriptor Reference Large Buffer Free Queue Read Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRLFQR[15] 0 Bit 14 R/W RPDRLFQR[14] 0 Bit 13 R/W RPDRLFQR[13] 0 Bit 12 R/W RPDRLFQR[12] 0 Bit 11 R/W RPDRLFQR[11] 0 Bit 10 R/W RPDRLFQR[10] 0 Bit 9 R/W RPDRLFQR[9] 0 Bit 8 R/W RPDRLFQR[8] 0 Bit 7 R/W RPDRLFQR[7] 0 Bit 6 R/W RPDRLFQR[6] 0 Bit 5 R/W RPDRLFQR[5] 0 Bit 4 R/W RPDRLFQR[4] 0 Bit 3 R/W RPDRLFQR[3] 0 Bit 2 R/W RPDRLFQR[2] 0 Bit 1 R/W RPDRLFQR[1] 0 Bit 0 R/W RPDRLFQR[0] 0 This register provides the Packet Descriptor Reference Large Buffer Free Queue read address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRLFQR[15:0]: The receive packet descriptor reference (RPDR) large buffer free queue read bits (RPDRLFQR[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Large Buffer Free Queue read pointer. This register is initialised by the host. The physical read address in the RPDRLF queue is the sum of RPDRLFQR[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 144 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2A4 : RMAC Packet Descriptor Reference Large Buffer Free Queue End Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRLFQE[15] 0 Bit 14 R/W RPDRLFQE[14] 0 Bit 13 R/W RPDRLFQE[13] 0 Bit 12 R/W RPDRLFQE[12] 0 Bit 11 R/W RPDRLFQE[11] 0 Bit 10 R/W RPDRLFQE[10] 0 Bit 9 R/W RPDRLFQE[9] 0 Bit 8 R/W RPDRLFQE[8] 0 Bit 7 R/W RPDRLFQE[7] 0 Bit 6 R/W RPDRLFQE[6] 0 Bit 5 R/W RPDRLFQE[5] 0 Bit 4 R/W RPDRLFQE[4] 0 Bit 3 R/W RPDRLFQE[3] 0 Bit 2 R/W RPDRLFQE[2] 0 Bit 1 R/W RPDRLFQE[1] 0 Bit 0 R/W RPDRLFQE[0] 0 This register provides the Packet Descriptor Reference Large Buffer Free Queue end address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRLFQE[15:0]: The receive packet descriptor reference (RPDR) large buffer free queue end bits (RPDRLFQE[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Large Buffer Free Queue end address. This register is initialised by the host. The physical end address in the RPDRLF queue is the sum of RPDRLFQE[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 145 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2A8 : RMAC Packet Descriptor Reference Small Buffer Free Queue Start Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRSFQS[15] 0 Bit 14 R/W RPDRSFQS[14] 0 Bit 13 R/W RPDRSFQS[13] 0 Bit 12 R/W RPDRSFQS[12] 0 Bit 11 R/W RPDRSFQS[11] 0 Bit 10 R/W RPDRSFQS[10] 0 Bit 9 R/W RPDRSFQS[9] 0 Bit 8 R/W RPDRSFQS[8] 0 Bit 7 R/W RPDRSFQS[7] 0 Bit 6 R/W RPDRSFQS[6] 0 Bit 5 R/W RPDRSFQS[5] 0 Bit 4 R/W RPDRSFQS[4] 0 Bit 3 R/W RPDRSFQS[3] 0 Bit 2 R/W RPDRSFQS[2] 0 Bit 1 R/W RPDRSFQS[1] 0 Bit 0 R/W RPDRSFQS[0] 0 This register provides the Packet Descriptor Reference Small Buffer Free Queue start address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRSFQS[15:0]: The receive packet descriptor reference (RPDR) small buffer free queue start bits (RPDRSFQS[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Small Buffer Free Queue start address. This register is initialised by the host. The physical start address of the RPDRSF queue is the sum of RPDRSFQS[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 146 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2AC : RMAC Packet Descriptor Reference Small Buffer Free Queue Write Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRSFQW[15] 0 Bit 14 R/W RPDRSFQW[14] 0 Bit 13 R/W RPDRSFQW[13] 0 Bit 12 R/W RPDRSFQW[12] 0 Bit 11 R/W RPDRSFQW[11] 0 Bit 10 R/W RPDRSFQW[10] 0 Bit 9 R/W RPDRSFQW[9] 0 Bit 8 R/W RPDRSFQW[8] 0 Bit 7 R/W RPDRSFQW[7] 0 Bit 6 R/W RPDRSFQW[6] 0 Bit 5 R/W RPDRSFQW[5] 0 Bit 4 R/W RPDRSFQW[4] 0 Bit 3 R/W RPDRSFQW[3] 0 Bit 2 R/W RPDRSFQW[2] 0 Bit 1 R/W RPDRSFQW[1] 0 Bit 0 R/W RPDRSFQW[0] 0 This register provides the Packet Descriptor Reference Small Buffer Free Queue write address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRSFQW[15:0]: The receive packet descriptor reference (RPDR) small buffer free queue write bits (RPDRSFQW[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Small Buffer Free Queue write pointer. This register is initialised by the host. The physical write address in the RPDRSF queue is the sum of RPDRSFQW[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 147 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2B0 : RMAC Packet Descriptor Reference Small Buffer Free Queue Read Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRSFQR[15] 0 Bit 14 R/W RPDRSFQR[14] 0 Bit 13 R/W RPDRSFQR[13] 0 Bit 12 R/W RPDRSFQR[12] 0 Bit 11 R/W RPDRSFQR[11] 0 Bit 10 R/W RPDRSFQR[10] 0 Bit 9 R/W RPDRSFQR[9] 0 Bit 8 R/W RPDRSFQR[8] 0 Bit 7 R/W RPDRSFQR[7] 0 Bit 6 R/W RPDRSFQR[6] 0 Bit 5 R/W RPDRSFQR[5] 0 Bit 4 R/W RPDRSFQR[4] 0 Bit 3 R/W RPDRSFQR[3] 0 Bit 2 R/W RPDRSFQR[2] 0 Bit 1 R/W RPDRSFQR[1] 0 Bit 0 R/W RPDRSFQR[0] 0 This register provides the Packet Descriptor Reference Small Buffer Free Queue read address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRSFQR[15:0]: The receive packet descriptor reference (RPDR) small buffer free queue read bits (RPDRSFQR[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Small Buffer Free Queue read pointer. This register is initialised by the host. The physical read address in the RPDRSF queue is the sum of RPDRSFQR[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 148 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2B4 : RMAC Packet Descriptor Reference Small Buffer Free Queue End Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRSFQE[15] 0 Bit 14 R/W RPDRSFQE[14] 0 Bit 13 R/W RPDRSFQE[13] 0 Bit 12 R/W RPDRSFQE[12] 0 Bit 11 R/W RPDRSFQE[11] 0 Bit 10 R/W RPDRSFQE[10] 0 Bit 9 R/W RPDRSFQE[9] 0 Bit 8 R/W RPDRSFQE[8] 0 Bit 7 R/W RPDRSFQE[7] 0 Bit 6 R/W RPDRSFQE[6] 0 Bit 5 R/W RPDRSFQE[5] 0 Bit 4 R/W RPDRSFQE[4] 0 Bit 3 R/W RPDRSFQE[3] 0 Bit 2 R/W RPDRSFQE[2] 0 Bit 1 R/W RPDRSFQE[1] 0 Bit 0 R/W RPDRSFQE[0] 0 This register provides the Packet Descriptor Reference Small Buffer Free Queue end address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRSFQE[15:0]: The receive packet descriptor reference (RPDR) small buffer free queue end bits (RPDRSFQE[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Small Buffer Free Queue end address. This register is initialised by the host. The physical end address in the RPDRSF queue is the sum of RPDRSFQE[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 149 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2B8 : RMAC Packet Descriptor Reference Ready Queue Start Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRRQS[15] 0 Bit 14 R/W RPDRRQS[14] 0 Bit 13 R/W RPDRRQS[13] 0 Bit 12 R/W RPDRRQS[12] 0 Bit 11 R/W RPDRRQS[11] 0 Bit 10 R/W RPDRRQS[10] 0 Bit 9 R/W RPDRRQS[9] 0 Bit 8 R/W RPDRRQS[8] 0 Bit 7 R/W RPDRRQS[7] 0 Bit 6 R/W RPDRRQS[6] 0 Bit 5 R/W RPDRRQS[5] 0 Bit 4 R/W RPDRRQS[4] 0 Bit 3 R/W RPDRRQS[3] 0 Bit 2 R/W RPDRRQS[2] 0 Bit 1 R/W RPDRRQS[1] 0 Bit 0 R/W RPDRRQS[0] 0 This register provides the Packet Descriptor Reference Ready Queue start address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRRQS[15:0]: The receive packet descriptor reference (RPDR) ready queue start bits (RPDRRQS[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Ready Queue start address. This register is initialised by the host. The physical start address of the RPDRR queue is the sum of RPDRRQS[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 150 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2BC : RMAC Packet Descriptor Reference Ready Queue Write Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRRQW[15] 0 Bit 14 R/W RPDRRQW[14] 0 Bit 13 R/W RPDRRQW[13] 0 Bit 12 R/W RPDRRQW[12] 0 Bit 11 R/W RPDRRQW[11] 0 Bit 10 R/W RPDRRQW[10] 0 Bit 9 R/W RPDRRQW[9] 0 Bit 8 R/W RPDRRQW[8] 0 Bit 7 R/W RPDRRQW[7] 0 Bit 6 R/W RPDRRQW[6] 0 Bit 5 R/W RPDRRQW[5] 0 Bit 4 R/W RPDRRQW[4] 0 Bit 3 R/W RPDRRQW[3] 0 Bit 2 R/W RPDRRQW[2] 0 Bit 1 R/W RPDRRQW[1] 0 Bit 0 R/W RPDRRQW[0] 0 This register provides the Packet Descriptor Reference Ready Queue write address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRRQW[15:0]: The receive packet descriptor reference (RPDR) ready queue write bits (RPDRRQW[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Ready Queue write pointer. This register is initialised by the host. The physical write address in the RPDRR queue is the sum of RPDRRQW[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 151 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2C0 : RMAC Packet Descriptor Reference Ready Queue Read Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRRQR[15] 0 Bit 14 R/W RPDRRQR[14] 0 Bit 13 R/W RPDRRQR[13] 0 Bit 12 R/W RPDRRQR[12] 0 Bit 11 R/W RPDRRQR[11] 0 Bit 10 R/W RPDRRQR[10] 0 Bit 9 R/W RPDRRQR[9] 0 Bit 8 R/W RPDRRQR[8] 0 Bit 7 R/W RPDRRQR[7] 0 Bit 6 R/W RPDRRQR[6] 0 Bit 5 R/W RPDRRQR[5] 0 Bit 4 R/W RPDRRQR[4] 0 Bit 3 R/W RPDRRQR[3] 0 Bit 2 R/W RPDRRQR[2] 0 Bit 1 R/W RPDRRQR[1] 0 Bit 0 R/W RPDRRQR[0] 0 This register provides the Packet Descriptor Reference Ready Queue read address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRRQR[15:0]: The receive packet descriptor reference (RPDR) ready queue read bits (RPDRRQR[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Ready Queue read pointer. This register is initialised by the host. The physical read address in the RPDRR queue is the sum of RPDRRQR[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 152 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x2C4 : RMAC Packet Descriptor Reference Ready Queue End Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W RPDRRQE[15] 0 Bit 14 R/W RPDRRQE[14] 0 Bit 13 R/W RPDRRQE[13] 0 Bit 12 R/W RPDRRQE[12] 0 Bit 11 R/W RPDRRQE[11] 0 Bit 10 R/W RPDRRQE[10] 0 Bit 9 R/W RPDRRQE[9] 0 Bit 8 R/W RPDRRQE[8] 0 Bit 7 R/W RPDRRQE[7] 0 Bit 6 R/W RPDRRQE[6] 0 Bit 5 R/W RPDRRQE[5] 0 Bit 4 R/W RPDRRQE[4] 0 Bit 3 R/W RPDRRQE[3] 0 Bit 2 R/W RPDRRQE[2] 0 Bit 1 R/W RPDRRQE[1] 0 Bit 0 R/W RPDRRQE[0] 0 This register provides the Packet Descriptor Reference Ready Queue end address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. RPDRRQE[15:0]: The receive packet descriptor reference (RPDR) ready queue end bits (RPDRRQE[15:0]) define bits 17 to 2 of the Receive Packet Descriptor Reference Ready Queue end address. This register is initialised by the host. The physical end address in the RPDRR queue is the sum of RPDRRQE[15:0] left shifted by 2 bits with the RQB[31:0] bits in the RMAC Receive Queue Base register. 153 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x300 : TMAC Control Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 R/W TDQ_FRN[1] 0 Bit 5 R/W TDQ_FRN[0] 0 Bit 4 R/W TDQ_RDYN[2] 0 Bit 3 R/W TDQ_RDYN[1] 0 Bit 2 R/W TDQ_RDYN[0] 0 Bit 1 R/W CACHE 1 Bit 0 R/W ENABLE 0 This register provides control of the TMAC block. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. ENABLE: The transmit DMA controller enable bit (ENABLE) enables the TMAC to accept TDRs from the TDR Ready Queue and reads packet data from host memory. When ENABLE is set high, the TMAC is enabled. When ENABLE is set low, the TDR Ready Queue is ignored. Once all linked lists of TDs built up by the TMAC have been exhausted, no more data will be transmitted on the TD[31:0] links. 154 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CACHE: The transmit descriptor reference cache enable bit (CACHE) controls the frequency at which TDRs are written to the TDR Free Queue. When CACHE is set high, freed TDRs are cache and then written up to six at a time. When CACHE is set low, freed TDRs are written one at a time. TDQ_RDYN[2:0]: The TDQ_RDYN[2:0] field sets the number of transmit descriptor references (TDRs) that must be read from the TDR Ready Queue before the TDR Ready interrupt (TDQRDYI) is asserted, as follows: Table 22 - TDQ_RDYN[2:0] Settings TDQ_RDYN[2:0] No of TDRs 000 1 001 4 010 6 011 8 100 16 101 32 110 Reserved 111 Reserved TDQ_FRN[1:0]: The TDQ_FRN[1:0] field sets the number of times that a block of TDRs are written to the TDR Free Queue from the TMACs internal cache before the TDR Free Queue Interrupt (TDQFI) is asserted, as follows: Table 23 - TDQ_FRN[1:0] Settings TDQ_FRN[1:0] No of Reads 00 1 01 4 10 8 11 Reserved 155 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x304 : TMAC Indirect Channel Provisioning Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R BUSY X Bit 14 R/W RWB 0 Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 R/W PROV 0 Bit 6 R/W CHAN[6] 0 Bit 5 R/W CHAN[5] 0 Bit 4 R/W CHAN[4] 0 Bit 3 R/W CHAN[3] 0 Bit 2 R/W CHAN[2] 0 Bit 1 R/W CHAN[1] 0 Bit 0 R/W CHAN[0] 0 The Channel Provisioning Register is used to provision and unprovision channels, and also to query the provision status of channels. When a channel is provisioned, chains of packet data for that channel will be accepted by the TMAC and placed on the channel's linked list of packets to be transmitted. When a channel is unprovisioned, chains of packet data for that channel will be rejected by the TMAC and returned to the TDR Free Queue with the status bits in the queue element set to indicate the rejection. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. 156 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CHAN[6:0]: The indirect data bits (CHAN[6:0]) report the channel number read from the TMAC internal memory after an indirect read operation has completed. Channel number to be written to the TMAC internal memory in an indirect write operation must be set up in this register before triggering the write. CHAN[6:0] reflects the value written until the completion of a subsequent indirect read operation. PROV: The indirect provision enable bit (PROV) reports the channel provision enable flag read from the TMAC internal memory after an indirect read operation has completed. The provision enable flag to be written to the TMAC internal memory, in an indirect write operation, must be set up in this register before triggering the write. When PROV is set high, the channel as indicated by CHAN[6:0] is provisioned. When PROV is set low, the channel indicated by CHAN[6:0] is unprovisioned. PROV reflects the value written until the completion of a subsequent indirect read operation. RWB: The Read/Write Bar (RWB) bit selects between a provisioning/unprovisioning operation (write) or a query operation (read). Writing a logic 0 to RWB triggers the provisioning or unprovisioning of a channel as specified by CHAN[6:0] and PROV. Writing a logic 1 to RWB triggers a query of the channel specified by CHAN[6:0]. BUSY: The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set high when this register is written to trigger an indirect access, and will stay high until the access is complete. At which point, BUSY will be set low. This register should be polled to determine when data from an indirect read operation is available or to determine when a new indirect write operation may commence. 157 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x308 : TMAC Descriptor Table Base LSW Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDTB[15] 0 Bit 14 R/W TDTB[14] 0 Bit 13 R/W TDTB[13] 0 Bit 12 R/W TDTB[12] 0 Bit 11 R/W TDTB[11] 0 Bit 10 R/W TDTB[10] 0 Bit 9 R/W TDTB[9] 0 Bit 8 R/W TDTB[8] 0 Bit 7 R/W TDTB[7] 0 Bit 6 R/W TDTB[6] 0 Bit 5 R/W TDTB[5] 0 Bit 4 R/W TDTB[4] 0 Bit 3 R/W TDTB[3] 0 Bit 2 R/W TDTB[2] 0 Bit 1 R/W TDTB[1] 0 Bit 0 R/W TDTB[0] 0 This register provides the less significant word of the Transmit Descriptor Table Base address. The contents of this register is held in a holding register until a write access to the companion TMAC Transmit Descriptor Table Base MSW register. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. 158 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x30C : TMAC Descriptor Table Base MSW Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDTB[31] 0 Bit 14 R/W TDTB[30] 0 Bit 13 R/W TDTB[29] 0 Bit 12 R/W TDTB[28] 0 Bit 11 R/W TDTB[27] 0 Bit 10 R/W TDTB[26] 0 Bit 9 R/W TDTB[25] 0 Bit 8 R/W TDTB[24] 0 Bit 7 R/W TDTB[23] 0 Bit 6 R/W TDTB[22] 0 Bit 5 R/W TDTB[21] 0 Bit 4 R/W TDTB[20] 0 Bit 3 R/W TDTB[19] 0 Bit 2 R/W TDTB[18] 0 Bit 1 R/W TDTB[17] 0 Bit 0 R/W TDTB[16] 0 This register provides the more significant word of the Transmit Descriptor Table Base address. The contents of the companion TMAC Transmit Descriptor Table Base LSW register is held in a holding register until a write access to this register, at which point, the base address of the transmit descriptor table is updated. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDTB[31:0]: The transmit descriptor table base bits (TDTB[31:0]) provides the base address of the Transmit Descriptor Table in PCI host memory. This register is initialised by the host. To 159 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER calculate the physical address of a TD, the 14 bit TD offset must be added to bits 31 to 4 of the Transmit Descriptor Table Base (TDTB[31:4]). The table must be on a 16 byte boundary and thus the least significant four bits must be written to logic zero. 160 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x310 : TMAC Queue Base LSW Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TQB[15] 0 Bit 14 R/W TQB[14] 0 Bit 13 R/W TQB[13] 0 Bit 12 R/W TQB[12] 0 Bit 11 R/W TQB[11] 0 Bit 10 R/W TQB[10] 0 Bit 9 R/W TQB[9] 0 Bit 8 R/W TQB[8] 0 Bit 7 R/W TQB[7] 0 Bit 6 R/W TQB[6] 0 Bit 5 R/W TQB[5] 0 Bit 4 R/W TQB[4] 0 Bit 3 R/W TQB[3] 0 Bit 2 R/W TQB[2] 0 Bit 1 R/W TQB[1] 0 Bit 0 R/W TQB[0] 0 This register provides the less significant word of the Transmit Queue Base address. The contents of this register is held in a holding register until a write access to the companion TMAC Transmit Queue Base MSW register. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. 161 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x314 : TMAC Queue Base MSW Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TQB[31] 0 Bit 14 R/W TQB[30] 0 Bit 13 R/W TQB[29] 0 Bit 12 R/W TQB[28] 0 Bit 11 R/W TQB[27] 0 Bit 10 R/W TQB[26] 0 Bit 9 R/W TQB[25] 0 Bit 8 R/W TQB[24] 0 Bit 7 R/W TQB[23] 0 Bit 6 R/W TQB[22] 0 Bit 5 R/W TQB[21] 0 Bit 4 R/W TQB[20] 0 Bit 3 R/W TQB[19] 0 Bit 2 R/W TQB[18] 0 Bit 1 R/W TQB[17] 0 Bit 0 R/W TQB[16] 0 This register provides the more significant word of the Transmit Queue Base address. The contents of the companion TMAC Transmit Descriptor Table Base LSW register is held in a holding register until a write access to this register, at which point, the base address of the transmit queue is updated. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TQB[31:0]: The transmit queue base bits (TQB[31:0]) provides the base address of the Transmit Descriptor Reference Free and Transmit Descriptor Reference Ready queue in PCI host 162 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER memory. This register is initialised by the host. To calculate the physical address of a particular transmit queue element, the TQB bits are added with the appropriate queue start, end, read or write index registers to form the physical address. The base address must be dword aligned and thus the least significant two bits must be written to logic zero. 163 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x318 : TMAC Descriptor Reference Free Queue Start Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDRFQS[15] 0 Bit 14 R/W TDRFQS[14] 0 Bit 13 R/W TDRFQS[13] 0 Bit 12 R/W TDRFQS[12] 0 Bit 11 R/W TDRFQS[11] 0 Bit 10 R/W TDRFQS[10] 0 Bit 9 R/W TDRFQS[9] 0 Bit 8 R/W TDRFQS[8] 0 Bit 7 R/W TDRFQS[7] 0 Bit 6 R/W TDRFQS[6] 0 Bit 5 R/W TDRFQS[5] 0 Bit 4 R/W TDRFQS[4] 0 Bit 3 R/W TDRFQS[3] 0 Bit 2 R/W TDRFQS[2] 0 Bit 1 R/W TDRFQS[1] 0 Bit 0 R/W TDRFQS[0] 0 This register provides the Transmit Descriptor Reference Free Queue start address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDRFQS[15:0]: The transmit packet descriptor reference (TDR) free queue start bits (TDRFQS[15:0]) define bits 17 to 2 of the Transmit Packet Descriptor Reference Free Queue start address. This register is initialised by the host. The physical start address of the TDRF queue is the sum of TDRFQS[15:0] left shifted by 2 bits with the TQB[31:0] bits in the TMAC Transmit Queue Base register. 164 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x31C TMAC Descriptor Reference Free Queue Write Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDRFQW[15] 0 Bit 14 R/W TDRFQW[14] 0 Bit 13 R/W TDRFQW[13] 0 Bit 12 R/W TDRFQW[12] 0 Bit 11 R/W TDRFQW[11] 0 Bit 10 R/W TDRFQW[10] 0 Bit 9 R/W TDRFQW[9] 0 Bit 8 R/W TDRFQW[8] 0 Bit 7 R/W TDRFQW[7] 0 Bit 6 R/W TDRFQW[6] 0 Bit 5 R/W TDRFQW[5] 0 Bit 4 R/W TDRFQW[4] 0 Bit 3 R/W TDRFQW[3] 0 Bit 2 R/W TDRFQW[2] 0 Bit 1 R/W TDRFQW[1] 0 Bit 0 R/W TDRFQW[0] 0 This register provides the Transmit Descriptor Reference Free Queue write address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDRFQW[15:0]: The transmit packet descriptor reference (TPDR) free queue write bits (TDRFQW[15:0]) define bits 17 to 2 of the Transmit Packet Descriptor Reference Free Queue write pointer. This register is initialised by the host. The physical write address in the TDRF queue is the sum of TDRFQW[15:0] left shifted by 2 bits with the TQB[31:0] bits in the TMAC Transmit Queue Base register. 165 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x320 : TMAC Descriptor Reference Free Queue Read Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDRFQR[15] 0 Bit 14 R/W TDRFQR[14] 0 Bit 13 R/W TDRFQR[13] 0 Bit 12 R/W TDRFQR[12] 0 Bit 11 R/W TDRFQR[11] 0 Bit 10 R/W TDRFQR[10] 0 Bit 9 R/W TDRFQR[9] 0 Bit 8 R/W TDRFQR[8] 0 Bit 7 R/W TDRFQR[7] 0 Bit 6 R/W TDRFQR[6] 0 Bit 5 R/W TDRFQR[5] 0 Bit 4 R/W TDRFQR[4] 0 Bit 3 R/W TDRFQR[3] 0 Bit 2 R/W TDRFQR[2] 0 Bit 1 R/W TDRFQR[1] 0 Bit 0 R/W TDRFQR[0] 0 This register provides the Transmit Descriptor Reference Free Queue read address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDRFQR[15:0]: The transmit packet descriptor reference (TPDR) free queue read bits (TDRFQR[15:0]) define bits 17 to 2 of the Transmit Packet Descriptor Reference Free Queue read pointer. This register is initialised by the host. The physical read address in the TDRF queue is the sum of TDRFQR[15:0] left shifted by 2 bits with the TQB[31:0] bits in the TMAC Transmit Queue Base register. 166 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x324 : TMAC Descriptor Reference Free Queue End Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDRFQE[15] 0 Bit 14 R/W TDRFQE[14] 0 Bit 13 R/W TDRFQE[13] 0 Bit 12 R/W TDRFQE[12] 0 Bit 11 R/W TDRFQE[11] 0 Bit 10 R/W TDRFQE[10] 0 Bit 9 R/W TDRFQE[9] 0 Bit 8 R/W TDRFQE[8] 0 Bit 7 R/W TDRFQE[7] 0 Bit 6 R/W TDRFQE[6] 0 Bit 5 R/W TDRFQE[5] 0 Bit 4 R/W TDRFQE[4] 0 Bit 3 R/W TDRFQE[3] 0 Bit 2 R/W TDRFQE[2] 0 Bit 1 R/W TDRFQE[1] 0 Bit 0 R/W TDRFQE[0] 0 This register provides the Transmit Descriptor Reference Free Queue end address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDRFQE[15:0]: The transmit packet descriptor reference (TDR) free queue end bits (TDRFQE[15:0]) define bits 17 to 2 of the Transmit Packet Descriptor Reference Free Queue end address. This register is initialised by the host. The physical end address of the TDRF queue is the sum of TDRFQE[15:0] left shifted by 2 bits with the TQB[31:0] bits in the TMAC Transmit Queue Base register. 167 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x328 :TMAC Descriptor Reference Ready Queue Start Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDRRQS[15] 0 Bit 14 R/W TDRRQS[14] 0 Bit 13 R/W TDRRQS[13] 0 Bit 12 R/W TDRRQS[12] 0 Bit 11 R/W TDRRQS[11] 0 Bit 10 R/W TDRRQS[10] 0 Bit 9 R/W TDRRQS[9] 0 Bit 8 R/W TDRRQS[8] 0 Bit 7 R/W TDRRQS[7] 0 Bit 6 R/W TDRRQS[6] 0 Bit 5 R/W TDRRQS[5] 0 Bit 4 R/W TDRRQS[4] 0 Bit 3 R/W TDRRQS[3] 0 Bit 2 R/W TDRRQS[2] 0 Bit 1 R/W TDRRQS[1] 0 Bit 0 R/W TDRRQS[0] 0 This register provides the Transmit Descriptor Reference Ready Queue start address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDRRQS[15:0]: The transmit packet descriptor reference (TDR) ready queue start bits (TDRRQS[15:0]) define bits 17 to 2 of the Transmit Packet Descriptor Reference Ready Queue start address. This register is initialised by the host. The physical start address of the TDRF queue is the sum of TDRRQS[15:0] left shifted by 2 bits with the TQB[31:0] bits in the TMAC Transmit Queue Base register. 168 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x32C : TMAC Descriptor Reference Ready Queue Write Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDRRQW[15] 0 Bit 14 R/W TDRRQW[14] 0 Bit 13 R/W TDRRQW[13] 0 Bit 12 R/W TDRRQW[12] 0 Bit 11 R/W TDRRQW[11] 0 Bit 10 R/W TDRRQW[10] 0 Bit 9 R/W TDRRQW[9] 0 Bit 8 R/W TDRRQW[8] 0 Bit 7 R/W TDRRQW[7] 0 Bit 6 R/W TDRRQW[6] 0 Bit 5 R/W TDRRQW[5] 0 Bit 4 R/W TDRRQW[4] 0 Bit 3 R/W TDRRQW[3] 0 Bit 2 R/W TDRRQW[2] 0 Bit 1 R/W TDRRQW[1] 0 Bit 0 R/W TDRRQW[0] 0 This register provides the Transmit Descriptor Reference Ready Queue write address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDRRQW[15:0]: The transmit packet descriptor reference (TPDR) ready queue write bits (TDRRQW[15:0]) define bits 17 to 2 of the Transmit Packet Descriptor Reference Ready Queue write pointer. This register is initialised by the host. The physical write address in the TDRF queue is the sum of TDRRQW[15:0] left shifted by 2 bits with the TQB[31:0] bits in the TMAC Transmit Queue Base register. 169 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x330 : TMAC Descriptor Reference Ready Queue Read Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDRRQR[15] 0 Bit 14 R/W TDRRQR[14] 0 Bit 13 R/W TDRRQR[13] 0 Bit 12 R/W TDRRQR[12] 0 Bit 11 R/W TDRRQR[11] 0 Bit 10 R/W TDRRQR[10] 0 Bit 9 R/W TDRRQR[9] 0 Bit 8 R/W TDRRQR[8] 0 Bit 7 R/W TDRRQR[7] 0 Bit 6 R/W TDRRQR[6] 0 Bit 5 R/W TDRRQR[5] 0 Bit 4 R/W TDRRQR[4] 0 Bit 3 R/W TDRRQR[3] 0 Bit 2 R/W TDRRQR[2] 0 Bit 1 R/W TDRRQR[1] 0 Bit 0 R/W TDRRQR[0] 0 This register provides the Transmit Descriptor Reference Ready Queue read address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDRRQR[15:0]: The transmit packet descriptor reference (TPDR) ready queue read bits (TDRRQR[15:0]) define bits 17 to 2 of the Transmit Packet Descriptor Reference Ready Queue read pointer. This register is initialised by the host. The physical read address in the TDRF queue is the sum of TDRRQR[15:0] left shifted by 2 bits with the TQB[31:0] bits in the TMAC Transmit Queue Base register. 170 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x334 : TMAC Descriptor Reference Ready Queue End Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W TDRRQE[15] 0 Bit 14 R/W TDRRQE[14] 0 Bit 13 R/W TDRRQE[13] 0 Bit 12 R/W TDRRQE[12] 0 Bit 11 R/W TDRRQE[11] 0 Bit 10 R/W TDRRQE[10] 0 Bit 9 R/W TDRRQE[9] 0 Bit 8 R/W TDRRQE[8] 0 Bit 7 R/W TDRRQE[7] 0 Bit 6 R/W TDRRQE[6] 0 Bit 5 R/W TDRRQE[5] 0 Bit 4 R/W TDRRQE[4] 0 Bit 3 R/W TDRRQE[3] 0 Bit 2 R/W TDRRQE[2] 0 Bit 1 R/W TDRRQE[1] 0 Bit 0 R/W TDRRQE[0] 0 This register provides the Transmit Descriptor Reference Ready Queue end address. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TDRRQE[15:0]: The transmit packet descriptor reference (TDR) ready queue end bits (TDRRQE[15:0]) define bits 17 to 2 of the Transmit Packet Descriptor Reference Ready Queue end address. This register is initialised by the host. The physical end address of the TDRF queue is the sum of TDRRQE[15:0] left shifted by 2 bits with the TQB[31:0] bits in the TMAC Transmit Queue Base register. 171 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x380 : THDL Indirect Channel Select Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R BUSY X Bit 14 R/W CRWB 0 Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 R/W CHAN[6] 0 Bit 5 R/W CHAN[5] 0 Bit 4 R/W CHAN[4] 0 Bit 3 R/W CHAN[3] 0 Bit 2 R/W CHAN[2] 0 Bit 1 R/W CHAN[1] 0 Bit 0 R/W CHAN[0] 0 This register provides the channel number used to access the transmit channel provision RAM. Writing to this register triggers an indirect channel register access. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CHAN[6:0]: The indirect channel number bits (CHAN[6:0]) indicate the channel to be configured or interrogated in the indirect access. 172 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CRWB: The channel indirect access control bit (CRWB) selects between a configure (write) or interrogate (read) access to the channel provision RAM. Writing a logic zero to CRWB triggers an indirect write operation. Data to be written is taken from the Indirect Channel Data registers. Writing a logic one to CRWB triggers an indirect read operation. The data read can be found in the Indirect Channel Data registers. BUSY: The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set high when this register is written to trigger an indirect access, and will stay high until the access is complete. At which point, BUSY will be set low. This register should be polled to determine when data from an indirect read operation is available in the THDL Indirect Channel Data #1, #2 and #3 registers or to determine when a new indirect write operation may commence. 173 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x384 : THDL Indirect Channel Data #1 Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W PROV 0 Bit 14 R/W CRC[1] 0 Bit 13 R/W CRC[0] 0 Bit 12 R/W IDLE 0 Bit 11 R/W DELIN 0 Bit 10 Unused X Bit 9 Unused X Bit 8 W FPTR[8] 0 Bit 7 W FPTR[7] 0 Bit 6 W FPTR[6] 0 Bit 5 W FPTR[5] 0 Bit 4 W FPTR[4] 0 Bit 3 W FPTR[3] 0 Bit 2 W FPTR[2] 0 Bit 1 W FPTR[1] 0 Bit 0 W FPTR[0] 0 This register contains data read from the channel provision RAM after an indirect channel read operation or data to be inserted into the channel provision RAM in an indirect channel write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. FPTR[8:0]: The indirect FIFO block pointer (FPTR[8:0]) informs the partial packet buffer processor the circular linked list of blocks to use for a FIFO for the channel. The FIFO pointer to be written to the channel provision RAM, in an indirect write operation, must be set up in this register 174 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER before triggering the write. The FIFO pointer value can be any one of the block numbers provisioned, by indirect block write operations, to form the circular buffer. DELIN: The indirect delineate enable bit (DELIN) configures the HDLC processor to perform flag sequence insertion and bit stuffing on the outgoing data stream. The delineate enable bit to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When DELIN is set high, flag sequence insertion, bit stuffing and ,optionally, CRC generation is performed on the outgoing HDLC data stream. When DELIN is set low, the HDLC processor does not perform any processing (flag sequence insertion, bit stuffing nor CRC generation) on the outgoing stream. DELIN reflects the value written until the completion of a subsequent indirect channel read operation. IDLE: The interframe time fill bit (IDLE) configures the HDLC processor to use flag bytes or HDLC idle as the interframe time fill between HDLC packets. The value of IDLE to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When IDLE is set low, the HDLC processor uses flag bytes as the interframe time fill. When IDLE is set high, the HDLC processor uses HDLC idle (all one's bit with no bit-stuffing pattern is transmitted) as the interframe time fill. IDLE reflects the value written until the completion of a subsequent indirect channel read operation. CRC[1:0]: The CRC algorithm (CRC[1:0]) configures the HDLC processor to perform CRC generation on the outgoing HDLC data stream. The value of CRC[1:0] to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. CRC[1:0] is ignored when DELIN is low. CRC[1:0] reflects the value written until the completion of a subsequent indirect channel read operation. Table 24 - CRC[1:0] Settings CRC[1] CRC[0] Operation 0 0 No CRC 0 1 CRC-CCITT 1 0 CRC-32 1 1 Reserved PROV: The indirect provision enable bit (PROV) reports the channel provision enable flag read from the channel provision RAM after an indirect channel read operation has completed. The provision enable flag to be written to the channel provision RAM, in an indirect write operation, must be set up in this register before triggering the write. When PROV is set high, the HDLC processor will service requests for data from the TCAS block. When PROV is set low, the 175 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER HDLC processor will ignore requests from the TCAS block. PROV reflects the value written until the completion of a subsequent indirect channel read operation. 176 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x388 : THDL Indirect Channel Data #2 Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R/W 7BIT 0 Bit 14 R/W PRIORITYB 0 Bit 13 R/W INVERT 0 Bit 12 R/W DFCS 0 Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 W FLEN[8] 0 Bit 7 W FLEN[7] 0 Bit 6 W FLEN[6] 0 Bit 5 W FLEN[5] 0 Bit 4 W FLEN[4] 0 Bit 3 W FLEN[3] 0 Bit 2 W FLEN[2] 0 Bit 1 W FLEN[1] 0 Bit 0 W FLEN[0] 0 This register contains data to be inserted into the channel provision RAM in an indirect write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. FLEN[8:0]: The indirect FIFO length (FLEN[8:0]) is the number of blocks, less one, that is provisioned to the circular channel FIFO specified by the FPTR[8:0] block pointer. The FIFO length to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. 177 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER DFCS: The diagnose frame check sequence bit (DFCS) controls the inversion of the FCS field inserted into the transmit packet. The value of DFCS to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When DFCS is set to one, the FCS field in the outgoing HDLC stream is logically inverted allowing diagnosis of downstream FCS verification logic. The outgoing FCS field is not inverted when DFCS is set to zero. DFCS reflects the value written until the completion of a subsequent indirect channel read operation. INVERT: The HDLC data inversion bit (INVERT) configures the HDLC processor to logically invert the outgoing HDLC stream. The value of INVERT to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When INVERT is set to one, the outgoing HDLC stream is logically inverted. The outgoing HDLC stream is not inverted when INVERT is set to zero. INVERT reflects the value written until the completion of a subsequent indirect channel read operation. PRIORITYB: The active low channel FIFO expedite enable bit (PRIORITYB) informs the partial packet processor of the priority of the channel relative to other channels when requesting data from the DMA port. The value of PRIORITYB to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. Channel FIFOs with PRIORITYB set to one are inhibited from making expedited requests for data to the TMAC. When PRIORITYB is set to zero, both normal and expedited requests can be made to the TMAC. Channels with HDLC data rate to FIFO size ratio that is significantly lower than other channels should have PRIORITYB set to one. PRIORITYB reflects the value written until the completion of a subsequent indirect channel read operation. 7BIT: The least significant stuff enable bit (7BIT) configures the HDLC processor to stuff the least significant bit of each octet in the corresponding transmit link (TD[n]). The value of 7BIT to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. When 7BIT is set high, the least significant bit (last bit of each octet transmitted) does not contain channel data and is forced to the value configured by the BIT8 register bit. When 7BIT is set low, the entire octet contains valid data and BIT8 is ignored. 7BIT reflects the value written until the completion of a subsequent indirect channel read operation. 178 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x38C : THDL Indirect Channel Data #3 Bit Type Function Default Unused XXXXH TRANS 0 Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 31 to Bit 16 Bit 15 R/W Bit 11 R/W LEVEL[3] 0 Bit 10 R/W LEVEL[2] 0 Bit 9 R/W LEVEL[1] 0 Bit 8 R/W LEVEL[0] 0 Bit 7 R/W FLAG[2] 0 Bit 6 R/W FLAG[1] 0 Bit 5 R/W FLAG[0] 0 Bit 4 Unused[ X Bit 3 Unused X Bit 2 R/W XFER[2] 0 Bit 1 R/W XFER[1] 0 Bit 0 R/W XFER[0] 0 This register contains data read from the channel provision RAM after an indirect read operation or data to be inserted into the channel provision RAM in an indirect write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. XFER[2:0]: The indirect channel transfer size (XFER[2:0]) specifies the amount of data the partial packet processor requests from the TMAC block. The channel transfer size to be written to the channel provision RAM, in an indirect write operation, must be set up in this register before triggering the write. When the channel FIFO free space reaches or exceeds the limit specified 179 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER by XFER[2:0], the partial packet processor will make a request for data to the TMAC to retrieve the XFER[2:0] + 1 blocks of data. FIFO free space and transfer size are measured in the number of 16-byte blocks. XFER[2:0] reflects the value written until the completion of a subsequent indirect channel read operation. To prevent lockup, the channel transfer size (XFER[2:0]) can be configured to be less than or equal to the start transmission level set by LEVEL[3:0] and TRANS. Alternatively, the channel transfer size can be set, such that, the total number of blocks in the logical channel FIFO minus the start transmission level is an integer multiple of the channel transfer size. The case of a single block transfer size is a special. When BURSTEN is set high and XFER[2:0] = 'b000, the transfer size is variable. The THDL will request the TMAC to transfer as much data as there is free space in the FIFO, up to a maximum set by BURST[2:0]. FLAG[2:0]: The flag insertion control (FLAG[2:0]) configures the minimum number of flags or bytes of idle bits the HDLC processor inserts between HDLC packets. The value of FLAG[2:0] to be written to the channel provision RAM, in an indirect channel write operation, must be set up in this register before triggering the write. The minimum number of flags or bytes of idle (8 bits of 1's) inserted between HDLC packets is shown in the table below. FLAG[2:0] reflects the value written until the completion of a subsequent indirect channel read operation. Table 25 - FLAG[2:0] Settings FLAG[2:0] Minimum Number of Flag/Idle Bytes 000 1 flag / 0 Idle byte 001 2 flags / 0 idle byte 010 4 flags / 2 idle bytes 011 8 flags / 6 idle bytes 100 16 flags / 14 idle bytes 101 32 flags / 30 idle bytes 110 64 flags / 62 idle bytes 111 128 flags / 126 idle bytes LEVEL[3:0]: The indirect channel FIFO trigger level (LEVEL[3:0]), in concert with the TRANS bit, configure the various channel FIFO free space levels which trigger the HDLC processor to start transmission of a HDLC packet as well as trigger the partial packet buffer to make DMA request for data as shown in the following table. The channel FIFO trigger level to be written to the channel provision RAM, in an indirect write operation, must be set up in this register 180 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER before triggering the write. LEVEL[3:0] reflects the value written until the completion of a subsequent indirect channel read operation. The HDLC processor starts transmitting a packet when the channel FIFO free space is less than or equal to the level specified in the appropriate Start Transmission Level column of the following table or when an end of a packet is stored in the channel FIFO. When the channel FIFO free space is less than or equal to the level specified in the Expedite Trigger Level column of the following table and the HDLC processor is transmitting a packet and an end of a packet is not stored in the channel FIFO, the partial packet buffer makes expedite requests to the TMAC to retrieve XFER[2:0] + 1 blocks of data. To prevent lockup, the channel transfer size (XFER[2:0]) can be configured to be less than or equal to the start transmission level set by LEVEL[3:0] and TRANS. Alternatively, the channel transfer size can be set, such that, the total number of blocks in the logical channel FIFO minus the start transmission level is an integer multiple of the channel transfer size. TRANS: The indirect transmission start bit (TRANS), in concert with the LEVEL[3:0] bits, configure the various channel FIFO free space levels which trigger the HDLC processor to start transmission of a HDLC packet as well as trigger the partial packet buffer to make DMA request for data as shown in the following table. The transmission start mode to be written to the channel provision RAM, in an indirect write operation, must be set up in this register before triggering the write. TRANS reflects the value written until the completion of a subsequent indirect channel read operation. The HDLC processor starts transmitting a packet when the channel FIFO free space is less than or equal to the level specified in the appropriate Start Transmission Level column of the following table or when an end of a packet is stored in the channel FIFO. When the channel FIFO free space is greater than the level specified in the Expedite Trigger Level column of the following table and the HDLC processor is transmitting a packet and an end of a packet is not stored in the channel FIFO, the partial packet buffer makes expedited requests to the TMAC to retrieve XFER[2:0] + 1 blocks of data. To prevent lockup, the channel transfer size (XFER[2:0]) can be configured to be less than or equal to the start transmission level set by LEVEL[3:0] and TRANS. Alternatively, the channel transfer size can be set, such that, the total number of blocks in the logical channel FIFO minus the start transmission level is an integer multiple of the channel transfer size. Table 26 - Level[3:0]/TRANS Settings LEVEL[3:0] Expedite Trigger Level Start Transmission Level (TRANS=0) Start Transmission Level (TRANS=1) 0000 2 Blocks (32 bytes free) 1 Block (16 bytes free) 1 Block (16 bytes free) 181 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER LEVEL[3:0] Expedite Trigger Level Start Transmission Level (TRANS=0) Start Transmission Level (TRANS=1) 0001 3 Blocks (48 bytes free) 2 Blocks (32 bytes free) 1 Block (16 bytes free) 0010 4 Blocks (64 bytes free) 3 Blocks (48 bytes free) 2 Blocks (32 bytes free) 0011 6 Blocks (96 bytes free) 4 Blocks (64 bytes free) 3 Blocks (48 bytes free) 0100 8 Blocks (128 bytes free) 6 Blocks (96 bytes free) 4 Blocks (64 bytes free) 0101 12 Blocks (192 bytes free) 8 Blocks (128 bytes free) 6 Blocks (96 bytes free) 0110 16 Blocks (256 bytes free) 12 Blocks (192 bytes free) 8 Blocks (128 bytes free) 0111 24 Blocks (384 bytes free) 16 Blocks (256 bytes free) 12 Blocks (192 bytes free) 1000 32 Blocks (512 bytes free) 24 Blocks (384 bytes free) 16 Blocks (256 bytes free) 1001 48 Blocks (768 bytes free) 32 Blocks (512 bytes free) 24 Blocks (384 bytes free) 1010 64 Blocks (1 Kbytes free) 48 Blocks (768 bytes free) 32 Blocks (512 bytes free) 1011 96 Blocks (1.5 Kbytes free) 64 Blocks (1 Kbytes free) 48 Blocks (768 bytes free) 1100 128 Blocks (2 Kbytes free) 96 Blocks (1.5 Kbytes free) 64 Blocks (1 Kbytes free) 1101 192 Blocks (3 Kbytes free) 128 Blocks (2 Kbytes free) 96 Blocks (1.5 Kbytes free) 1110 256 Blocks (4 Kbytes free) 192 Blocks (3 Kbytes free) 128 Blocks (2 Kbytes free) 1111 384 Blocks (6 Kbytes free) 256 Blocks (4 Kbytes free) 192 Blocks (3 Kbytes free) 182 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x3A0 : THDL Indirect Block Select Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R BUSY X Bit 14 R/W BRWB 0 Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 R/W BLOCK[8] 0 Bit 7 R/W BLOCK[7] 0 Bit 6 R/W BLOCK[6] 0 Bit 5 R/W BLOCK[5] 0 Bit 4 R/W BLOCK[4] 0 Bit 3 R/W BLOCK[3] 0 Bit 2 R/W BLOCK[2] 0 Bit 1 R/W BLOCK[1] 0 Bit 0 R/W BLOCK[0] 0 This register provides the block number used to access the block pointer RAM. Writing to this register triggers an indirect block register access. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. BLOCK[8:0]: The indirect block number (BLOCK[8:0]) indicate the block to be configured or interrogated in the indirect access. 183 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER BRWB: The block indirect access control bit (BRWB) selects between a configure (write) or interrogate (read) access to the block pointer RAM. Writing a logic zero to BRWB triggers an indirect block write operation. Data to be written is taken from the Indirect Block Data register. Writing a logic one to BRWB triggers an indirect block read operation. The data read can be found in the Indirect Block Data register. BUSY: The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set high when this register is written to trigger an indirect access, and will stay high until the access is complete. At which point, BUSY will be set low. This register should be polled to determine when data from an indirect read operation is available in the THDL Indirect Block Data register or to determine when a new indirect write operation may commence. 184 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x3A4 : THDL Indirect Block Data Bit Type Function Default Unused XXXXH Reserved 0 Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 31 to Bit 16 Bit 15 R/W Bit 8 R/W BPTR[8] 0 Bit 7 R/W BPTR[7] 0 Bit 6 R/W BPTR[6] 0 Bit 5 R/W BPTR[5] 0 Bit 4 R/W BPTR[4] 0 Bit 3 R/W BPTR[3] 0 Bit 2 R/W BPTR[2] 0 Bit 1 R/W BPTR[1] 0 Bit 0 R/W BPTR[0] 0 This register contains data read from the transmit block pointer RAM after an indirect block read operation or data to be inserted into the transmit block pointer RAM in an indirect block write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. BPTR[8:0]: The indirect block pointer (BPTR[8:0]) configures the block pointer of the block specified by the Indirect Block Select register. The block pointer to be written to the transmit block pointer RAM, in an indirect write operation, must be set up in this register before triggering the write. 185 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The block pointer value is the block number of the next block in the linked list. A circular list of blocks must be formed in order to use the block list as a channel FIFO buffer. FPTR[8:0] reflects the value written until the completion of a subsequent indirect block read operation. When provisioning a channel FIFO, all blocks pointers must be re-written to properly initialize the FIFO. Reserved: The reserved bit (Reserved) must be set low for correct operation of the FREEDM-8 device. 186 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x3B0 : THDL Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 R/W BIT8 0 Bit 8 R/W TSTD 0 Bit 7 R/W BURSTEN 0 Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 R/W BURST[2] 0 Bit 1 R/W BURST[1] 0 Bit 0 R/W BURST[0] 0 This register configures all provisioned channels. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. BURST[2:0]: The DMA burst length bits (BURST[2:0]) configure the maximum amount of transmit data that can be requested in a single DMA transaction for channels whose channel transfer size is set to one block (XFER[2:0] = 'b000). BURST[2:0] has no effect when BURSTEN is set low, nor on channels configured with other transfer sizes. BURST[2:0] defines the maximum number 187 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER of 16 byte blocks, less one, that is transferred in each DMA transaction. Thus, the minimum number of blocks is one (16 bytes) and the maximum is eight (128 bytes). BURSTEN: The burst length enable bit (BURSTEN) controls the use of BURST[2:0] in determining the amount of data requested in a single DMA transaction for channels whose channel transfer size is set to one block (XFER[2:0] = 'b000). BURSTEN has no effect on channels configured with other transfer sizes. When BURSTEN is set high, the maximum size of DMA transfer is limited by BURST[2:0]. The transmit HDLC processor may combine several channel transfer size amounts into a single transaction. When BURSTEN is set low, the amount of data in a DMA transfer is limited to one block. TSTD: The telecom standard bit (TSTD) controls the bit ordering of the HDLC data transferred from the PCI host. When TSTD is set low, the least significant bit of the each byte on the PCI bus (AD[0], AD[8], AD[16] and AD[24]) is the first HDLC bit transmitted and the most significant bit of each byte (AD[7], AD[15], AD[23] and AD[31]) is the last HDLC bit transmitted (datacom standard). When TSTD is set high, AD[0], AD[8], AD[16] and AD[24] are the last HDLC bit transmitted and AD[7], AD[15], AD[23] and AD[31] are the first HDLC bit transmitted (telecom standard). BIT8: The least significant stuff control bit (BIT8) carries the value placed in the least significant bit of each octet when the HDLC processor is configured (7BIT set high) to stuff the least significant bit of each octet in the corresponding transmit link (TD[n]). When BIT8 is set high, the least significant bit (last bit of each octet transmitted) is forced high. When BIT8 is set low, the least significant bit is forced low. BIT8 is ignored when 7BIT is set low. 188 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x400 : TCAS Indirect Link and Time-slot Select Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R BUSY X Bit 14 R/W RWB 0 Unused X Bit 13 Bit 12 R/W Reserved[1] 0 Bit 11 R/W Reserved[0] 0 Bit 10 R/W LINK[2] 0 Bit 9 R/W LINK[1] 0 Bit 8 R/W LINK[0] 0 Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 R/W TSLOT[4] 0 Bit 3 R/W TSLOT[3] 0 Bit 2 R/W TSLOT[2] 0 Bit 1 R/W TSLOT[1] 0 Bit 0 R/W TSLOT[0] 0 This register provides the link number and time-slot number used to access the transmit channel provision RAM. Writing to this register triggers an indirect register access and transfers the contents of the Indirect Channel Data register to an internal holding register. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. TSLOT[4:0]: The indirect time-slot number bits (TSLOT[4:0]) indicate the time-slot to be configured or interrogated in the indirect access. For a channelised T1 link, time-slots 1 to 24 are valid. For 189 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER a channelised E1 link, time-slots 1 to 31 are valid. For unchannelised links, only time-slot 0 is valid. LINK[2:0]: The indirect link number bits (LINK[2:0]) select amongst the 8 transmit links to be configured or interrogated in the indirect access. RWB: The indirect access control bit (RWB) selects between a configure (write) or interrogate (read) access to the transmit channel provision RAM. The address to the transmit channel provision RAM is constructed by concatenating the TSLOT[4:0] and LINK[2:0] bits. Writing a logic zero to RWB triggers an indirect write operation. Data to be written is taken from the PROV and the CHAN[6:0] bits of the Indirect Data register. Writing a logic one to RWB triggers an indirect read operation. Addressing of the RAM is the same as in an indirect write operation. The data read can be found in the PROV and the CHAN[6:0] bits of the Indirect Channel Data register. BUSY: The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set high when this register is written to trigger an indirect access, and will stay high until the access is complete. At which point, BUSY will be set low. This register should be polled to determine when data from an indirect read operation is available in the TCAS Indirect Channel Data register or to determine when a new indirect write operation may commence. Reserved[1:0]: The reserved bits (Reserved[1:0]) must be set low for the correct operation of the FREEDM-8 device. 190 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x404 : TCAS Indirect Channel Data Bit Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X PROV 0 Unused X Bit 8 Type R/W Bit 7 Bit 6 R/W CHAN[6] 0 Bit 5 R/W CHAN[5] 0 Bit 4 R/W CHAN[4] 0 Bit 3 R/W CHAN[3] 0 Bit 2 R/W CHAN[2] 0 Bit 1 R/W CHAN[1] 0 Bit 0 R/W CHAN[0] 0 This register contains the data read from the transmit channel provision RAM after an indirect read operation or the data to be inserted into the transmit channel provision RAM in an indirect write operation. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CHAN[6:0]: The indirect data bits (CHAN[6:0]) report the channel number read from the transmit channel provision RAM after an indirect read operation has completed. Channel number to be written to the transmit channel provision RAM in an indirect write operation must be set up in this 191 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER register before triggering the write. CHAN[6:0] reflects the value written until the completion of a subsequent indirect read operation. PROV: The indirect provision enable bit (PROV) reports the channel provision enable flag read from transmit channel provision RAM after an indirect read operation has completed. The provision enable flag to be written to the transmit channel provision RAM in an indirect write operation must be set up in this register before triggering the write. When PROV is set high, the current time-slot is assigned to the channel as indicated by CHAN[6:0]. When PROV is set low, the time-slot does not belong to any channel. The transmit link data is set to the contents of the Idle Time-slot Fill Data register. PROV reflects the value written until the completion of a subsequent indirect read operation. 192 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x408 : TCAS Framing Bit Threshold Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 R/W FTHRES[6] 0 Bit 5 R/W FTHRES[5] 0 Bit 4 R/W FTHRES[4] 1 Bit 3 R/W FTHRES[3] 1 Bit 2 R/W FTHRES[2] 1 Bit 1 R/W FTHRES[1] 1 Bit 0 R/W FTHRES[0] 1 This register contains the threshold used by the clock activity monitors to detect for framing bits/bytes. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. FTHRES[6:0]: The framing bit threshold bits (FTHRES[6:0]) contains the threshold used by the clock activity monitor to detect for the presence of framing bits. A counter in the clock activity monitor of each receive link increments at each SYSCLK and is cleared, when the BSYNC bit of that link is set low, by each rising edge of the corresponding TCLK[n]. When the BSYNC bit of that link 193 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER is set high, the counter is cleared at every fourth rising edge of the corresponding TCLK[n]. When the counter exceeds the threshold given by FTHRES[6:0], a framing bit/byte has been detected. FTHRES[6:0] should be set as a function of the SYSCLK period and the expected gapping width of TCLK[n] during data bits and during framing bits/bytes. Legal range of FTHRES[6:0] is 'b0000001 to 'b1111110. 194 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x40C : TCAS Idle Time-slot Fill Data Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 R/W FDATA[7] 1 Bit 6 R/W FDATA[6] 1 Bit 5 R/W FDATA[5] 1 Bit 4 R/W FDATA[4] 1 Bit 3 R/W FDATA[3] 1 Bit 2 R/W FDATA[2] 1 Bit 1 R/W FDATA[1] 1 Bit 0 R/W FDATA[0] 1 This register contains the data to be written to disabled time-slots of a channelised link. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. FDATA[7:0]: The fill data bits (FDATA[7:0]) are transmitted during disabled (PROV set low) time-slots of channelised links. 195 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x410 : TCAS Channel Disable Bit Type Function Default Unused XXXXH CHDIS 0 Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 31 to Bit 16 Bit 15 R/W Bit 6 R/W DCHAN[6] 0 Bit 5 R/W DCHAN[5] 0 Bit 4 R/W DCHAN[4] 0 Bit 3 R/W DCHAN[3] 0 Bit 2 R/W DCHAN[2] 0 Bit 1 R/W DCHAN[1] 0 Bit 0 R/W DCHAN[0] 0 This register controls the disabling of one specific channel to allow orderly provisioning of timeslots. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. DCHAN[6:0]: The disable channel number bits (DCHAN[6:0]) selects the channel to be disabled. When CHDIS is set high, the channel specified by DCHAN[6:0] is disabled. Data in timeslots associated with the specified channel is set to FDATA[7:0] in the Idle Time-slot Fill Data register. When CHDIS is set low, the channel specified by DCHAN[6:0] operates normally. 196 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CHDIS: The channel disable bit (CHDIS) controls the disabling of the channels specified by DCHAN[6:0]. When CHDIS is set high, the channel selected by DCHAN[6:0] is disabled. Data in timeslots associated with the specified channel is set to FDATA[7:0] in the Idle Timeslot Fill Data register. When CHDIS is set low, the channel specified by DCHAN[6:0] operates normally. 197 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x480 : TCAS Link #0 Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 R/W BSYNC 0 Bit 1 R/W E1 0 Bit 0 R/W CEN 0 This register configures operational modes of transmit link #0 (TD[0] / TCLK[0]). Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CEN: The channelise enable bit (CEN) configures transmit link #0 for channelised operation. TCLK[0] is held quiescent during the T1 framing bit or the E1 framing byte. Thus, on the first rising edge of TCLK[0] after the extended quiescent period, a downstream block can sample the m.s.b. of time-slot 1. When CEN is set low, link #0 is unchannelised and the E1 register bit is ignored. TCLK[0] is gapped during non-data bytes. The choice between treating all data 198 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER bits as a contiguous stream with arbitrary byte alignment or byte aligned to gaps in TCLK[0] is controlled by the BSYNC bit. E1: The E1 frame structure select bit (E1) configures link #0 for channelised E1 operation when CEN is set high. TCLK[0] is held quiescent during the FAS and NFAS framing bytes. The most significant bit of time-slot 1 is placed on TD[0] on the last falling edge of TCLK[0] ahead of the extended quiescent period. Link data is present at time-slots 1 to 31. When E1 is set low and CEN is set high, link #0 is configured for channelised T1 operation. TCLK[0] is held quiescent during the framing bit. The m.s.b. of time-slot 1 is placed on TD[0] on the last falling edge of TCLK[0] ahead of the extended quiescent period. Link data is present at time-slots 1 to 24. E1 is ignored when CEN is set low. BSYNC: The byte synchronisation enable bit (BSYNC) controls the interpretation of gaps in TCLK[0] when link #0 is in unchannelised mode (CEN set low). When BSYNC is set high, the data bit on TD[0] clocked in by a downstream device on the first rising edge of TCLK[0] after an extended quiescent period is considered to be the most significant bit of a data byte. When BSYNC is set quiescent , gaps in TCLK[0] carry no special significance. BSYNC is ignored when CEN is set high. 199 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x484-0x488 : TCAS Link #1 to Link #2 Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 R/W BSYNC 0 Bit 1 R/W E1 0 Bit 0 R/W CEN 0 This register set configures operational modes of transmit link #1 to link # 2 (TD[n] / TCLK[n]; where 1 n 2). Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CEN: The channelise enable bit (CEN) configures the corresponding transmit link for channelised operation. TCLK[n] is held quiescent during the T1 framing bit or the E1 framing byte. Thus, on the first rising edge of TCLK[n] after the extended quiescent period, a downstream block can sample the m.s.b. of time-slot 1. When CEN is set low, the corresponding link is 200 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER unchannelised and the E1 register bit is ignored. TCLK[n] is gapped during non-data bytes. The choice between treating all data bits as a contiguous stream with arbitrary byte alignment or byte aligned to gaps in TCLK[n] is controlled by the BSYNC bit. E1: The E1 frame structure select bit (E1) configures the corresponding link for channelised E1 operation when CEN is set high. TCLK[n] is held quiescent during the FAS and NFAS framing bytes. The most significant bit of time-slot 1 is placed on TD[n] on the last falling edge of TCLK[n] ahead of the extended quiescent period. Link data is present at time-slots 1 to 31. When E1 is set low and CEN is set high, the corresponding link is configured for channelised T1 operation. TCLK[n] is held quiescent during the framing bit. The m.s.b. of time-slot 1 is placed on TD[n] on the last falling edge of TCLK[n] ahead of the extended quiescent period. Link data is present at time-slots 1 to 24. E1 is ignored when CEN is set low. BSYNC: The byte synchronisation enable bit (BSYNC) controls the interpretation of gaps in TCLK[n] when the corresponding link is in unchannelised mode (CEN set low). When BSYNC is set high, the data bit on TD[n] clocked in by a downstream device on the first rising edge of TCLK[n] after an extended quiescent period is considered to be the most significant bit of a data byte. When BSYNC is set low, gaps in TCLK[n] carry no special significance. BSYNC is ignored when CEN is set high. 201 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x48C : TCAS Link #3 Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 Unused 0 Bit 1 R/W E1 0 Bit 0 R/W CEN 0 This register set configures operational modes of transmit link #3. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CEN: The channelise enable bit (CEN) configures transmit link #3 for channelised operation. TCLK[3] is held quiescent during the T1 framing bit or the E1 framing byte. Thus, on the first rising edge of TCLK[3] after the extended quiescent period, a downstream device can sample the m.s.b. of time-slot 1. When CEN is set low, link #3 is unchannelised and the E1 register bit 202 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER is ignored. TCLK[3] is gapped during non-data bytes. All data bits are treated as a contiguous stream with arbitrary byte alignment. E1: The E1 frame structure select bit (E1) configures link #3 for channelised E1 operation when CEN is set high. TCLK[3] is held quiescent during the FAS and NFAS framing bytes. The most significant bit of time-slot 1 is placed on TD[3] on the last falling edge of TCLK[3] ahead of the extended quiescent period. Link data is present at time-slots 1 to 31. When E1 is set low and CEN is set high, link #3 is configured for channelised T1 operation. TCLK[3] is held quiescent during the framing bit. The m.s.b. of time-slot 1 is placed on TD[3] on the last falling edge of TCLK[3] ahead of the extended quiescent period. Link data is present at time-slots 1 to 24. E1 is ignored when CEN is set low. 203 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x490-0x49C : TCAS Link #4 to Link #7 Configuration Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 Unused X Bit 4 Unused X Bit 3 Unused X Bit 2 Unused 0 Bit 1 R/W E1 0 Bit 0 R/W CEN 0 This register set configures operational modes of transmit link #4 to link # 7 (TD[n] / TCLK[n]; where 4 n 7 ). Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. CEN: The channelise enable bit (CEN) configures the corresponding transmit link for channelised operation. TCLK[n] is held quiescent during the T1 framing bit or the E1 framing byte. Thus, on the first rising edge of TCLK[n] after the extended quiescent period, a downstream device can sample the m.s.b. of time-slot 1. When CEN is set low, the corresponding link is 204 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER unchannelised and the E1 register bit is ignored. TCLK[n] is gapped during non-data bytes. All data bits are treated as a contiguous stream with arbitrary byte alignment. E1: The E1 frame structure select bit (E1) configures the corresponding link for channelised E1 operation when CEN is set high. TCLK[n] is held quiescent during the FAS and NFAS framing bytes. The most significant bit of time-slot 1 is placed on TD[n] on the last falling edge of TCLK[n] ahead of the extended quiescent period. Link data is present at time-slots 1 to 31. When E1 is set low and CEN is set high, the corresponding link is configured for channelised T1 operation. TCLK[n] is held quiescent during the framing bit. The m.s.b. of time-slot 1 is placed on TD[n] on the last falling edge of TCLK[n] ahead of the extended low period. Link data is present at time-slots 1 to 24. E1 is ignored when CEN is set low. 205 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x500 : PMON Status Bit Type Function Default Bit 31 to Bit 16 Unused XXXXH Bit 15 Unused X Bit 14 Unused X Bit 13 Unused X Bit 12 Unused X Bit 11 Unused X Bit 10 Unused X Bit 9 Unused X Bit 8 Unused X Bit 7 Unused X Bit 6 Unused X Bit 5 R C2DET X Bit 4 R C1DET X Bit 3 R UFDET X Bit 2 R OFDET X Bit 1 Unused X Bit 0 Unused X This register contains status information indicating whether a non-zero count has been latched in the count registers. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. OFDET: The overflow detect bit (OFDET) indicates the status of the PMON Receive FIFO Overflow Count register. OFDET is set high when overflow events have occurred during the latest PMON accumulation interval. OFDET is set low if no overflow events are detected. 206 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER UFDET: The underflow detect bit (UFDET) indicates the status of the PMON Transmit FIFO Underflow Count register. UFDET is set high when underflow events have occurred during the latest PMON accumulation interval. UFDET is set low if no underflow events are detected. C1DET: The configurable event #1 detect bit (C1DET) indicates the status of the PMON Configurable Count #1 register. C1DET is set high when selected events have occurred during the latest PMON accumulation interval. C1DET is set low if no selected events are detected. C2DET: The configurable event #2 detect bit (C2DET) indicates the status of the PMON Configurable Count #2 register. C2DET is set high when selected events have occurred during the latest PMON accumulation interval. C2DET is set low if no selected events are detected. 207 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x504 : PMON Receive FIFO Overflow Count Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R OF[15] X Bit 14 R OF[14] X Bit 13 R OF[13] X Bit 12 R OF[12] X Bit 11 R OF[11] X Bit 10 R OF[10] X Bit 9 R OF[9] X Bit 8 R OF[8] X Bit 7 R OF[7] X Bit 6 R OF[6] X Bit 5 R OF[5] X Bit 4 R OF[4] X Bit 3 R OF[3] X Bit 2 R OF[2] X Bit 1 R OF[1] X Bit 0 R OF[0] X This register reports the number of receive FIFO overflow events in the previous accumulation interval. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. OF[15:0]: The OF[15:0] bits reports the number of receive FIFO overflow events that have been detected since the last time this register was polled. This register is polled by writing to the FREEDM-8 Master Clock / BERT Activity Monitor and Accumulation Trigger register. The write 208 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER access transfers the internally accumulated error count to the FIFO overflow register and simultaneously resets the internal counter to begin a new cycle of error accumulation. 209 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x508 : PMON Receive FIFO Underflow Count Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R UF[15] X Bit 14 R UF[14] X Bit 13 R UF[13] X Bit 12 R UF[12] X Bit 11 R UF[11] X Bit 10 R UF[10] X Bit 9 R UF[9] X Bit 8 R UF[8] X Bit 7 R UF[7] X Bit 6 R UF[6] X Bit 5 R UF[5] X Bit 4 R UF[4] X Bit 3 R UF[3] X Bit 2 R UF[2] X Bit 1 R UF[1] X Bit 0 R UF[0] X This register reports the number of transmit FIFO underflow events in the previous accumulation interval. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. UF[15:0]: The UF[15:0] bits reports the number of transmit FIFO underflow events that have been detected since the last time this register was polled. This register is polled by writing to the FREEDM-8 Master Clock / BERT Activity Monitor and Accumulation Trigger register. The write 210 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER access transfers the internally accumulated error count to the FIFO underflow register and simultaneously resets the internal counter to begin a new cycle of error accumulation. 211 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x50C : PMON Configurable Count #1 Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R C1[15] X Bit 14 R C1[14] X Bit 13 R C1[13] X Bit 12 R C1[12] X Bit 11 R C1[11] X Bit 10 R C1[10] X Bit 9 R C1[9] X Bit 8 R C1[8] X Bit 7 R C1[7] X Bit 6 R C1[6] X Bit 5 R C1[5] X Bit 4 R C1[4] X Bit 3 R C1[3] X Bit 2 R C1[2] X Bit 1 R C1[1] X Bit 0 R C1[0] X This register reports the number events, selected by the FREEDM-8 Master Performance Monitor Control register, that occurred in the previous accumulation interval. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. C1[15:0]: The C1[15:0] bits reports the number of selected events that have been detected since the last time this register was polled. This register is polled by writing to the FREEDM-8 Master Clock / BERT Activity Monitor and Accumulation Trigger register. The write access transfers 212 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER the internally accumulated error count to the configurable count #1 register and simultaneously resets the internal counter to begin a new cycle of event accumulation. 213 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x510 : PMON Configurable Count #2 Bit Type Bit 31 to Bit 16 Function Default Unused XXXXH Bit 15 R C2[15] X Bit 14 R C2[14] X Bit 13 R C2[13] X Bit 12 R C2[12] X Bit 11 R C2[11] X Bit 10 R C2[10] X Bit 9 R C2[9] X Bit 8 R C2[8] X Bit 7 R C2[7] X Bit 6 R C2[6] X Bit 5 R C2[5] X Bit 4 R C2[4] X Bit 3 R C2[3] X Bit 2 R C2[2] X Bit 1 R C2[1] X Bit 0 R C2[0] X This register reports the number events, selected by the FREEDM-8 Master Performance Monitor Control register, that occurred in the previous accumulation interval. Note This register is not byte addressable. Writing to this register modifies all the bits in the register. Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all four byte enables are negated, no access is made to this register. C2[15:0]: The C2[15:0] bits reports the number of selected events that have been detected since the last time this register was polled. This register is polled by writing to the FREEDM-8 Master Clock / BERT Activity Monitor and Accumulation Trigger register. The write access transfers 214 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER the internally accumulated error count to the configurable count #2 register and simultaneously resets the internal counter to begin a new cycle of event accumulation. 215 PM7366 FREEDM-8 DATA SHEET PMC-970930 11 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER PCI CONFIGURATION REGISTER DESCRIPTION PCI configuration registers are implemented by the PCI Interface. These registers can only be accessed when the PCI Interface is a target and a configuration cycle is in progress as indicated using the IDSEL input. Notes on PCI Configuration Register Bits: 1. Writing values into unused register bits has no effect. However, to ensure software compatibility with future, feature-enhanced versions of the product, unused register bits must be written with logic zero. Reading back unused bits can produce either a logic one or a logic zero; hence unused register bits should be masked off by software when read. 2. Except where noted, all configuration bits that can be written into can also be read back. This allows the processor controlling the FREEDM-8 to determine the programming state of the block. 3. Writable PCI configuration register bits are cleared to logic zero upon reset unless otherwise noted. 4. Writing into read-only PCI configuration register bit locations does not affect FREEDM-8 operation unless otherwise noted. 5. Certain register bits are reserved. These bits are associated with megacell functions that are unused in this application. To ensure that the FREEDM-8 operates as intended, reserved register bits must only be written with their default values. Similarly, writing to reserved registers should be avoided. 11.1 PCI Configuration Registers PCI configuration registers can only be accessed by the PCI host. For each register description below, the hexadecimal register number indicates the PCI offset. 216 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x00 : Vendor Identification/Device Identification Bit Type Function Default Bit 31 to Bit 16 R DEVID[15:0] 7366H Bit 15 to Bit 0 R VNDRID[15:0] 11F8H VNDRID[15:0]: The VNDRID[15:0] bits identifies the manufacturer of the device. Valid vendor identifiers are allocated by the PCI SIG. DEVID[15:0]: The DEVID[15:0] bits define the particular device. Valid device identifiers will be specified by PMC-Sierra. The default value of DEVID[15:0] is that of the FREEDM-8 device. 217 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x04 : Command/Status Bit Type Function Default Bit 31 R/W PERR 0 Bit 30 R/W SERR 0 Bit 29 R/W MABT 0 Bit 28 R/W RTABT 0 Bit 27 R/W TABT 0 Bit 26 R DVSLT[1] 0 Bit 25 R DVSLT[0] 1 Bit 24 R/W DPR 0 Bit 23 R FBTBE 1 Bit 22 to Bit 16 R Reserved 00H Bit 15 to Bit 10 R Reserved 00H Bit 9 R FBTBEN 0 Bit 8 R/W SERREN 0 Bit 7 R ADSTP 0 Bit 6 R/W PERREN 0 Bit 5 R VGASNP 0 Bit 4 R MWAI 0 Bit 3 R SPCEN 0 Bit 2 R/W MSTREN 0 Bit 1 R/W MCNTRL 0 Bit 0 R IOCNTRL 0 The lower 16 bits of this register make up the Command register which provides basic control over the GPIC's ability to respond to PCI accesses. When a 0 is written to all bits in the command register, the GPIC is logically disconnected from the PCI bus for all accesses except configuration accesses. The upper 16-bits is used to record status information for PCI bus related events. Reads to the status portion of this register behave normally. Writes are slightly different in that bits can be 218 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER reset, but not set. A bit is reset whenever the register is written, and the data in the corresponding bit location is a 1. IOCNTRL: When IOCNTRL is set to zero, the GPIC will not respond to PCI bus I/O accesses. MCNTRL: When MCNTRL is set to one, the GPIC will respond to PCI bus memory accesses. Clearing MCNTRL disables memory accesses. MSTREN: When MSTREN is set to one, the GPIC can act as a Master. Clearing MSTREN disables the GPIC from becoming a Master. SPCEN: The GPIC does not decode PCI special cycles. The SPCEN bit is forced low. MWAI: The GPIC does not generate memory-write-and-invalidate commands. The MWAI bit is forced low. VGASNP: The GPIC is not a VGA device. The VGASNP bit is forced low. PERREN: When the PERREN bit is set to one, the GPIC can report parity errors. Clearing the PERREN bit causes the GPIC to ignore parity errors. ADSTP: The GPIC does not perform address and data stepping. The ADSTP bit is forced low. SERREN: When the SERREN bit is set high, the GPIC can drive the SERRB line. Clearing the SERREN bit disables the SERRB line. SERREN and PERREN must be set to report an address parity error. FBTBEN: As a master, the GPIC does not generate fast back-to-back cycles to different devices. This bit is forced low. The upper 16-bits make up the PCI Status field. The status field tracks the status of PCI bus related events. Reads to this register behave normally. Writes are slightly different in that bits can 219 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER be reset, but not set. A bit is reset whenever the register is written, and the data in the corresponding bit location is a one. FBTBE: The FBTBE bit is hardwired to one to indicate the GPIC supports fast back-to-back transactions with other targets. DPR: The Data Parity Reported (DPR) bit is set high if the GPIC is an initiator and asserts or detects a parity error on the PERRB signal while the PERREN bit is set in the Command register. The DPR bit is cleared by the PCI Host. DVSLT[1:0]: The Device Select Timing (DEVSLT) bits specify the allowable timings for the assertion of DEVSELB by the GPIC as a target. These are encoded as 00B for fast, 01B for medium, 10B for slow and 11B is not used. The GPIC allows for medium timing. TABT: The Target Abort (TABT) bit is set high by the GPIC when as a target, it terminates a transaction with a target abort. The TABT bit is cleared by the PCI Host. RTABT: The Received Target Abort (RTABT) bit is set high by the GPIC when as an initiator, its transaction is terminated by a target abort. The RTABT bit is cleared by the PCI Host. MABT: The Master Abort (MABT) bit is set high by the GPIC when as an initiator, its transaction is terminated by a master abort and a special cycle was not in progress. The MABT bit is cleared by the PCI Host. SERR: The System Error (SERR) bit is set high whenever the GPIC asserts the SERRB output. The SERR bit is cleared by the PCI Host. PERR: The Parity Error (PERR) bit is set high whenever the GPIC detects a parity error, even if parity error handling is disabled by clearing PERREN in the Command register. The PERR bit is cleared by the PCI Host. 220 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x08 : Revision Identifier/Class Code Bit Type Function Default Bit 31 to Bit 24 R CCODE[23:16] 02H Bit 23 to Bit 16 R CCODE[15:8] 80H Bit 15 to Bit 8 R CCODE[7:0] 00H Bit 7 to Bit 0 R REVID[7:0] 01H REVID[7:0]: The Revision Identifier (REVID[7:0]) bits specify a device specific revision identifier and are chosen by PMC-Sierra. CCODE[23:0]: The class code (CCODE[23:0]) bits are divided into three groupings: CCODE[23:16] define the base class of the device, CCODE[15:8] define the sub-class of the device and CCODE[7:0] specify a register specific programming interface. Note: Base Class Code: 02H Network Controller Sub-Class Code: 80H Other Controllers Register Class Code: 00H None defined. 221 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x0C : Cache Line Size/Latency Timer/Header Type Bit Type Function Default Bit 31 to Bit 24 R Reserved 00H Bit 23 R MLTFNC 0 Bit 22 to Bit 16 R HDTYPE[6:0] 00H Bit 15 to Bit 8 R/W LT[7:0] 00H Bit 7 to Bit 0 R/W CLSIZE 00H CLSIZE[7:0]: The Cache Line Size (CLSIZE[7:0]) bits specify the size of the system cacheline in units of dwords. The GPIC uses this value to determine the type of read command to issue in a Master Read transfer. If the transfer size is equal to one, the GPIC will issue a Memory Read command. If the transfer size is equal to or less than the CLSIZE, the GPIC will issue a Memory Read Line command. For transfers larger than CLSIZE, the GPIC issues a Memory Read Multiple command. LT[7:0]: The Latency Timer (LT[7:0]) bits specify in units of the PCI clock, the value of the Latency Timer for the GPIC. At reset the value is zero. HDTYPE[6:0]: The Header Type (HDTYPE[7:0]) bits specify the layout of the base address registers. Only the 00H encoding is supported. MLTFNC: The Multi-Function (MLTFNC) bit specifies if the GPIC supports multiple PCI functions. If this bit is set low, the device only supports one function and if the bit is set high, the device supports multi-functions. The MLTFNC bit is set low to indicate the GPIC only supports one PCI function. 222 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x10 : CBI Memory Base Address Register Bit Type Function Default Bit 31 to Bit 12 R/W BSAD[27:8] 00000H Bit 11 to Bit 4 R BSAD[7:0] 00H Bit 3 R PRFTCH 0 Bit 2 R TYPE[1] 0 Bit 1 R TYPE[0] 0 Bit 0 R MSI 0 The GPIC supports memory mapping only. At boot-up the internal registers space is mapped to memory space. The device driver can disable memory space through the PCI Configuration Command register. MSI: MSI is forced low to indicate that the internal registers map into memory space. TYPE[1:0]: The TYPE field indicates where the internal registers can be mapped. The encoding 00B indicates the registers may be located anywhere in the 32 bit address space, 01B indicates that the registers must be mapped below 1 Meg in memory space, 10B indicates the base register is 64 bits and the encoding 11B is reserved. The TYPE field is set to 00B to indicate that the CBI registers can be mapped anywhere in the 32 bit address space. PRFTCH: The Prefetchable (PRFTCH) bit is set if there are no side effects on reads and data is returned on all the lanes regardless of the byte enables. Otherwise the bit is cleared. TSBs contain registers, such as interrupt status registers, in which bits are cleared on a read. If the PCI Host is caching data there is a possibility an interrupt status could be lost if data is prefetched, but the cache is flushed and the data is not used. The PRFTCH bit is forced low to indicate that prefetching of data is not supported for internal registers. 223 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER BSAD[27:0]: The Base Address (BSAD[27:0]) bits defines the size and location of the memory space required for the CBI registers. The BSAD[27:0] bits correspond to the most significant 28 bits of the PCI address space. The size of the address space required can be determined by writing all ones to Base Address register and then reading from it. By scanning the returned value from the least significant bit upwards, the size of the required address space can be determined. The binary weighted value of the first one bit found (after the configuration bits) indicates the required amount of space. The BSAD[7:0] bits are forced low to indicate that the CBI registers require 4K bytes of memory space. After determining the memory requirements of the CBI registers, the PCI Host can map them to its desired location by modifying the BSAD[27:8] bits in the Base Address register. 224 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Register 0x3C : Interrupt Line / Interrupt Pin / MIN_GNT / MAX_LAT Bit Type Function Default Bit 31 to Bit 24 R MAXLAT[7:0] 0FH Bit 23 to Bit 16 R MINGNT[7:0] 05H Bit 15 to Bit 8 R INTPIN[7:0] 01H Bit 7 to Bit 0 R/W INTLNE[7:0] 00H INTLNE[7:0]: The Interrupt Line (INTLNE[7:0]) field is used to indicate interrupt line routing information. The values in this register are system specific and set by the PCI Host. INTPIN[7:0]: The Interrupt Pin (INTPIN[7:0]) field is used to specify the interrupt pin the GPIC uses. Since the GPIC will use INTAB on the PCI bus, the value in this register is set to one. MINGNT[7:0]: The Minimum Grant (MINGNT[7:0]) field specifies how long of a burst period the bus master needs (in increments of 250 nsec). MAXLAT[7:0]: The Maximum Latency (MAXLAT[7:0]) field specifies how often a bus master needs access to the PCI bus (in increments of 250 nsec). 225 PM7366 FREEDM-8 DATA SHEET PMC-970930 12 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER TEST FEATURES DESCRIPTION The FREEDM-8 also supports a standard IEEE 1149.1 five signal JTAG boundary scan test port for use in board testing. All device inputs may be read and all device outputs may be forced via the JTAG test port. 12.1 Test Mode Registers Test mode registers are used to apply test vectors during production testing of the FREEDM. Production testing is enabled by asserting the PMCTEST pin. During production tests, FREEDM8 registers are selected by the TA[11:0] pins. The address of a register on TA[11:0] is identical to the PCI offset of that register when production testing is disabled (PMCTEST low). Read accesses are enabled by asserting TRDB low while write accesses are enabled by asserting TWRB low. Test mode register data is conveyed on the TDAT[15:0] pins. Test mode registers (as opposed to normal mode registers) are selected when TA[11]/TRS is set high. 226 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 27 - Test Mode Register Memory Map Address TA[10:0] Register 0x000 - 0x7FC Normal Mode Registers 0x800 - 0x83C Reserved 0x840 - 0x87C GPIC Test Registers 0x880 - 0x8FC Reserved 0x900 - 0x9FC RCAS Test Registers 0xA00 - 0xA3C RHDL Test Registers 0xA40 - 0xA7C Reserved 0xA80 - 0xAFC RMAC Test Registers 0xB00 - 0xB7C TMAC Test Registers 0xB80 - 0xBBC THDL Test Registers 0xBC0 - 0xBFF Reserved 0xC00 - 0xCFC TCAS Test Registers 0xD00 - 0xD1C PMON Test Registers 0xD20 - 0xFFF Reserved Notes on Test Mode Register Bits: 1. Writing values into unused register bits has no effect. However, to ensure software compatibility with future, feature-enhanced versions of the product, unused register bits must be written with logic zero. Reading back unused bits can produce either a logic one or a logic zero; hence unused register bits should be masked off by software when read. 2. Writable test mode register bits are not initialized upon reset unless otherwise noted. 12.2 JTAG Test Port The FREEDM-8 JTAG Test Access Port (TAP) allows access to the TAP controller and the 4 TAP registers: instruction, bypass, device identification and boundary scan. Using the TAP, device input logic levels can be read, device outputs can be forced, the device can be identified and the device scan path can be bypassed. For more details on the JTAG port, please refer to the Operations section. 227 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Table 28 - Instruction Register Length - 3 bits Instructions Selected Register Instruction Code IR[2:0] EXTEST Boundary Scan 000 IDCODE Identification 001 SAMPLE Boundary Scan 010 BYPASS Bypass 011 BYPASS Bypass 100 STCTEST Boundary Scan 101 BYPASS Bypass 110 BYPASS Bypass 111 12.2.1 Identification Register Length - 32 bits Version number - 1H Part Number - 7366H Manufacturer's identification code - 0CDH Device identification - 173660CDH 12.2.2 Boundary Scan Register The boundary scan register is made up of 268 boundary scan cells, divided into input observation (in_cell), output (out_cell), and bi-directional (io_cell) cells. These cells are detailed in the pages which follow. The first 32 cells form the ID code register, and carry the code 173660CDH. The cells are arranged as follows: Table 29 - Boundary Scan Chain Pin/ Enable Register Bit Cell Type Device I.D. RD[0] 267 IN_CELL 0 RCLK[0] 266 IN_CELL 0 RD[1] 265 IN_CELL 0 228 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. RCLK[1] 264 IN_CELL 1 RD[2] 263 IN_CELL 0 RCLK[2] 262 IN_CELL 1 RD[3] 261 IN_CELL 1 RCLK[3] 260 IN_CELL 1 RD[4] 259 IN_CELL 0 RCLK[4] 258 IN_CELL 0 RD[5] 257 IN_CELL 1 RCLK[5] 256 IN_CELL 1 RD[6] 255 IN_CELL 0 RCLK[6] 254 IN_CELL 1 RD[7] 253 IN_CELL 1 RCLK[7] 252 IN_CELL 0 Tied to `1' 251 IN_CELL 0 Tied to `0' 250 IN_CELL 1 Tied to `1' 249 IN_CELL 1 Tied to `0' 248 IN_CELL 0 TA[0] 247 IN_CELL 0 Tied to `0' 246 IN_CELL 0 TA[1] 245 IN_CELL 0 Tied to `0' 244 IN_CELL 0 TA[2] 243 IN_CELL 1 Tied to `0' 242 IN_CELL 1 TA[3] 241 IN_CELL 0 Tied to `0' 240 IN_CELL 0 TA[4] 239 IN_CELL 1 Tied to `0' 238 IN_CELL 1 TA[5] 237 IN_CELL 0 Tied to `0' 236 IN_CELL 1 229 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. TA[6] 235 IN_CELL - Tied to `0' 234 IN_CELL - TA[7] 233 IN_CELL - Tied to `0' 232 IN_CELL - TA[8] 231 IN_CELL - Tied to `0' 230 IN_CELL - TA[9] 229 IN_CELL - Tied to `0' 228 IN_CELL - TA[10] 227 IN_CELL - Tied to `0' 226 IN_CELL - TA[11]/TRS 225 IN_CELL - Tied to `0' 224 IN_CELL - TRDB 223 IN_CELL - Tied to `0' 222 IN_CELL - TWRB 221 IN_CELL - Tied to `0' 220 IN_CELL - Tied to `1' 219 IN_CELL - Tied to `0' 218 IN_CELL - Tied to `1' 217 IN_CELL - Tied to `0' 216 IN_CELL - Tied to `1' 215 IN_CELL - Tied to `0' 214 IN_CELL - Tied to `1' 213 IN_CELL - Tied to `0' 212 IN_CELL - Tied to `1' 211 IN_CELL - Tied to `0' 210 IN_CELL - Tied to `1' 209 IN_CELL - Tied to `0' 208 IN_CELL - PCICLKO 207 OUT_CELL - 230 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. PCICLKO_OEN 206 OUT_CELL - PCICLK 205 IN_CELL - GNTB 204 IN_CELL - REQB[0] 203 OUT_CELL - REQB_OEN[0] 202 OUT_CELL - AD[31] 201 IO_CELL - AD_OEN[31] 200 OUT_CELL - AD[30] 199 IO_CELL - AD_OEN[30] 198 OUT_CELL - AD[29] 197 IO_CELL - AD_OEN[29] 196 OUT_CELL - AD[28] 195 IO_CELL - AD_OEN[28] 194 OUT_CELL - AD[27] 193 IO_CELL - AD_OEN[27] 192 OUT_CELL - AD[26] 191 IO_CELL - AD_OEN[26] 190 OUT_CELL - AD[25] 189 IO_CELL - AD_OEN[25] 188 OUT_CELL - AD[24] 187 IO_CELL - AD_OEN[24] 186 OUT_CELL - CBEB[3] 185 IO_CELL - CBEB_OEN[3] 184 OUT_CELL - IDSEL 183 IN_CELL - AD[23] 182 IO_CELL - AD_OEN[23] 181 OUT_CELL - AD[22] 180 IO_CELL - AD_OEN[22] 179 OUT_CELL - AD[21] 178 IO_CELL - 231 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. AD_OEN[21] 177 OUT_CELL - AD[20] 176 IO_CELL - AD_OEN[20] 175 OUT_CELL - AD[19] 174 IO_CELL - AD_OEN[19] 173 OUT_CELL - AD[18] 172 IO_CELL - AD_OEN[18] 171 OUT_CELL - AD[17] 170 IO_CELL - AD_OEN[17] 169 OUT_CELL - AD[16] 168 IO_CELL - AD_OEN[16] 167 OUT_CELL - CBEB[2] 166 IO_CELL - CBEB[2]_OEN 165 OUT_CELL - FREMEB 164 IO_CELL - FRAMEB_OEN 163 OUT_CELL - IRDYB 162 IO_CELL - IRDY_OEN 161 OUT_CELL - TRDYB 160 IO_CELL - TRDYB_OEN 159 OUT_CELL - DEVSELB 158 IO_CELL - DEVSELB_OEN 157 OUT_CELL - STOPB 156 IO_CELL - STOPB_OEN 155 OUT_CELL - LOCKB 154 IN_CELL - PERRB 153 IO_CELL - PERRB_OEN 152 OUT_CELL - SERRB 151 IO_CELL - SERRB_OEN 150 OUT_CELL - PAR 149 IO_CELL - 232 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. PAR_OEN 148 OUT_CELL - CBEB[1] 147 IO_CELL - CBEB_OEN[1] 146 OUT_CELL - AD[15] 145 IO_CELL - AD_OEN[15] 144 OUT_CELL - AD[14] 143 IO_CELL - AD_OEN[14] 142 OUT_CELL - AD[13] 141 IO_CELL - AD_OEN[13] 140 OUT_CELL - AD[12] 139 IO_CELL - AD_OEN[12] 138 OUT_CELL - AD[11] 137 IO_CELL - AD_OEN[11] 136 OUT_CELL - AD[10] 135 IO_CELL - AD_OEN[10] 134 OUT_CELL - AD[9] 133 IO_CELL - AD_OEN[9] 132 OUT_CELL - AD[8] 131 IO_CELL - AD_OEN[8] 130 OUT_CELL - CBEB[0] 129 IO_CELL - CBEB_OEN[0] 128 OUT_CELL - AD[7] 127 IO_CELL - AD_OEN[7] 126 OUT_CELL - AD[6] 125 IO_CELL - AD_OEN[6] 124 OUT_CELL - AD[5] 123 IO_CELL - AD_OEN[5] 122 OUT_CELL - AD[4] 121 IO_CELL - AD_OEN[4] 120 OUT_CELL - 233 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. AD[3] 119 IO_CELL - AD_OEN[3] 118 OUT_CELL - AD[2] 117 IO_CELL - AD_OEN[2] 116 OUT_CELL - AD[1] 115 IO_CELL - AD_OEN[1] 114 OUT_CELL - AD[0] 113 IO_CELL - AD_OEN[0] 112 OUT_CELL - Tied to `1' 111 IN_CELL - Tied to `0' 110 IN_CELL - Tied to `1' 109 IN_CELL - Tied to `0' 108 IN_CELL - PCIINTB 107 OUT_CELL PCIINTB_OEN 106 OUT_CELL - PMCTEST 105 IN_CELL - RSTB 104 IN_CELL - TBCLK 103 OUT_CELL - TBCLK_OEN 102 OUT_CELL - TBD 101 IN_CELL - Tied to `0' 100 IN_CELL - TDAT[15] 99 OUT_CELL - TDAT_OEN[15] 98 OUT_CELL - Tied to `0' 97 IN_CELL - TDAT[14] 96 OUT_CELL - TDAT_OEN[14] 95 OUT_CELL - Tied to `0' 94 IN_CELL - TDAT[13] 93 OUT_CELL - TDAT_OEN[13] 92 OUT_CELL - Tied to `0' 91 IN_CELL - 234 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. TDAT[12] 90 OUT_CELL - TDAT_OEN[12] 89 OUT_CELL - Tied to `0' 88 IN_CELL - TDAT[11] 87 OUT_CELL - TDAT_OEN[11] 86 OUT_CELL - Tied to `0' 85 IN_CELL - TDAT[10] 84 OUT_CELL - TDAT_OEN[10] 83 OUT_CELL - Tied to `0' 82 IN_CELL - TDAT[9] 81 OUT_CELL - TDAT_OEN[9] 80 OUT_CELL - Tied to `0' 79 IN_CELL - TDAT[8] 78 OUT_CELL - TDAT_OEN[8] 77 OUT_CELL - Tied to `0' 76 IN_CELL - TDAT[7] 75 OUT_CELL - TDAT_OEN[7] 74 OUT_CELL - Tied to `0' 73 IN_CELL - TDAT[6] 72 OUT_CELL - TDAT_OEN[6] 71 OUT_CELL - Tied to `0' 70 IN_CELL - TDAT[5] 69 OUT_CELL - TDAT_OEN[5] 68 OUT_CELL - Tied to `0' 67 IN_CELL - TDAT[4] 66 OUT_CELL - TDAT_OEN[4] 65 OUT_CELL - Tied to `0' 64 IN_CELL - TDAT[3] 63 OUT_CELL - TDAT_OEN[3] 62 OUT_CELL - 235 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. Tied to `0' 61 IN_CELL - TDAT[2] 60 OUT_CELL - TDAT_OEN[2] 59 OUT_CELL - Tied to `0' 58 IN_CELL - TDAT[1] 57 OUT_CELL - TDAT_OEN[1] 56 OUT_CELL - Tied to `0' 55 IN_CELL - TDAT[0] 54 OUT_CELL - TDAT_OEN[0] 53 OUT_CELL - Tied to `0' 52 IN_CELL - Unconnected 51 OUT_CELL - Unconnected 50 OUT_CELL - Tied to `0' 49 IN_CELL - Unconnected 48 OUT_CELL - Unconnected 47 OUT_CELL - Tied to `0' 46 IN_CELL - Unconnected 45 OUT_CELL - Unconnected 44 OUT_CELL - Tied to `0' 43 IN_CELL - Unconnected 42 OUT_CELL - Unconnected 41 OUT_CELL - Tied to `0' 40 IN_CELL - Unconnected 39 OUT_CELL - Unconnected 38 OUT_CELL - Tied to `0' 37 IN_CELL - Unconnected 36 OUT_CELL - Unconnected 35 OUT_CELL - Tied to `0' 34 IN_CELL - Unconnected 33 OUT_CELL - 236 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. Unconnected 32 OUT_CELL - Tied to `0' 31 IN_CELL - Unconnected 30 OUT_CELL - Unconnected 29 OUT_CELL - TCLK[7] 28 IN_CELL - TD[7] 27 OUT_CELL - TD_OEN[7] 26 OUT_CELL - TCLK[6] 25 IN_CELL - TD[6] 24 OUT_CELL - TD_OEN[6] 23 OUT_CELL - TCLK[5] 22 IN_CELL - TD[5] 21 OUT_CELL - TD_OEN[5] 20 OUT_CELL - TCLK[4] 19 IN_CELL - TD[4] 18 OUT_CELL - TD_OEN[4] 17 OUT_CELL - TCLK[3] 16 IN_CELL - TD[3] 15 OUT_CELL - TD_OEN[3] 14 OUT_CELL - TCLK[2] 13 IN_CELL - TD[2] 12 OUT_CELL - TD_OEN[2] 11 OUT_CELL - TCLK[1] 10 IN_CELL - TD[1] 9 OUT_CELL - TD_OEN[1] 8 OUT_CELL - TCLK[0] 7 IN_CELL - TD[0] 6 OUT_CELL - TD_OEN[0] 5 OUT_CELL - TAP Output - TDO 237 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 Pin/ Enable FRAME ENGINE AND DATA LINK MANAGER Register Bit Cell Type Device I.D. TDI TAP Input - TCK TAP Clock - TMS TAP Input - TRSTB TAP Input - SYSCLK 4 IN_CELL - RBD 3 OUT_CELL - RBD_OEN 2 OUT_CELL - RBCLK 1 OUT_CELL - RBCLK_OEN 0 OUT_CELL - Notes: 1. RD[0] is the first bit of the scan chain (closest to TDI). 2. Enable cell pinname_OEN, tristates pin pinname when set high. Figure 16 - Input Observation Cell (IN_CELL) IDCODE Scan Chain Out INPUT to internal logic Input Pad G1 G2 SHIFT-DR I.D. Code bit 12 1 2 MUX 12 12 D C CLOCK-DR Scan Chain In In this diagram and those that follow, CLOCK-DR is equal to TCK when the current controller state is SHIFT-DR or CAPTURE-DR, and unchanging otherwise. The multiplexor in the center of the 238 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER diagram selects one of four inputs, depending on the status of select lines G1 and G2. The ID Code bit is as listed in the table above. Figure 17 - Output Cell (OUT_CELL) Scan Chain Out G1 EXTEST Output or Enable from system logic IDCODE SHIFT-DR 1 G1 G2 1 Output or Enable MUX 1 2 I.D. code bit 1 2 MUX 1 2 1 2 D C CLOCK-DR UPDATE-DR Scan Chain In 239 D C PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 18 - Bi-directional Cell (IO_CELL) Scan Chain Out G1 EXTEST OUTPUT from internal logic IDCODE 1 SHIFT-DR INPUT from pin I.D. code bit MUX 1 G1 G2 12 1 2 MUX 12 12 D INPUT to internal logic OUTPUT to pin D C C CLOCK-DR UPDATE-DR Scan Chain In Figure 19 - Layout of Output Enable and Bi-directional Cells Scan Chain Out OUTPUT ENABLE from internal logic (0 = drive) OUT_CELL Scan Chain In Scan Chain Out INPUT to internal logic OUTPUT from internal logic IO_CELL I/O PAD Scan Chain In 240 PM7366 FREEDM-8 DATA SHEET PMC-970930 13 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER OPERATIONS This section presents connection details to the PM6344 EQUAD and PM4388 TOCTL devices, and operating details for the JTAG boundary scan feature. 13.1 EQUAD Connections The required connections between the PM6344 EQUAD and the FREEDM-8 are shown in the following table: Table 30 - FREEDM-EQUAD Connections FREEDM Pin Direction EQUAD Pin RCLK[n] RDLCLK/RDLEOM[m] RD[n] RDLSIG/RDLINT[m] n.c. RFP[m] n.c. RCLKO[m] TCLK[n] TDLCLK/TDLURD[m] TD[n] TDLSIG/TDLINT[m] The RFRACE1 and TFRACE1 bits in the EQUAD's Datalink Options Register should be set to `1'. In addition, the EQUAD's Channel Select Registers should be programmed such that timeslot 0 is disabled and timeslots 1 to 31 enabled. 13.2 TOCTL Connections The required connections between the PM4388 TOCTL and the FREEDM-8 are shown in the following table: Table 31 - FREEDM-TOCTL Connections FREEDM Pin Direction TOCTL Pin RCLK[n] ICLK/ISIG[n] RD[n] ID[n] n.c. IFP[n] TCLK[n] EFP/RCLK/ESIG[n] TD[n] ED[n] 241 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER All 8 framers in the TOCTL should be programmed to operate in "Clock Master: NxDS0" mode in both the ingress and egress direction. 13.3 JTAG Support The FREEDM-8 supports the IEEE Boundary Scan Specification as described in the IEEE 1149.1 standards. The Test Access Port (TAP) consists of the five standard pins, TRSTB, TCK, TMS, TDI and TDO used to control the TAP controller and the boundary scan registers. The TRSTB input is the active low reset signal used to reset the TAP controller. TCK is the test clock used to sample data on input, TDI and to output data on output, TDO. The TMS input is used to direct the TAP controller through its states. The basic boundary scan architecture is shown below. Figure 20 - Boundary Scan Architecture Boundary Scan Register TDI Device Identification Register Bypass Register Instruction Register and Decode Mux DFF Control TMS Test Access Port Controller Select Tri-state Enable TRSTB TCK 242 TDO PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The boundary scan architecture consists of a TAP controller, an instruction register with instruction decode, a bypass register, a device identification register and a boundary scan register. The TAP controller interprets the TMS input and generates control signals to load the instruction and data registers. The instruction register with instruction decode block is used to select the test to be executed and/or the register to be accessed. The bypass register offers a single bit delay from primary input, TDI to primary output , TDO. The device identification register contains the device identification code. The boundary scan register allows testing of board inter-connectivity. The boundary scan register consists of a shift register placed in series with device inputs and outputs. Using the boundary scan register, all digital inputs can be sampled and shifted out on primary output TDO. In addition, patterns can be shifted in on primary input, TDI and forced onto all digital outputs. TAP Controller The TAP controller is a synchronous finite state machine clocked by the rising edge of primary input, TCK. All state transitions are controlled using primary input, TMS. The finite state machine is described below. 243 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 21 - TAP Controller Finite State Machine TRSTB=0 Test-Logic-Reset 1 0 1 1 Run-Test-Idle 1 Select-IR-Scan Select-DR-Scan 0 0 0 1 1 Capture-IR Capture-DR 0 0 Shift-IR Shift-DR 1 1 0 0 1 1 Exit1-IR Exit1-DR 0 0 Pause-IR Pause-DR 0 1 0 1 0 0 Exit2-DR Exit2-IR 1 1 Update-DR 1 0 Update-IR 1 0 All transitions dependent on input TMS 244 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Test-Logic-Reset The test logic reset state is used to disable the TAP logic when the device is in normal mode operation. The state is entered asynchronously by asserting input, TRSTB. The state is entered synchronously regardless of the current TAP controller state by forcing input, TMS high for 5 TCK clock cycles. While in this state, the instruction register is set to the IDCODE instruction. Run-Test-Idle The run test/idle state is used to execute tests. Capture-DR The capture data register state is used to load parallel data into the test data registers selected by the current instruction. If the selected register does not allow parallel loads or no loading is required by the current instruction, the test register maintains its value. Loading occurs on the rising edge of TCK. Shift-DR The shift data register state is used to shift the selected test data registers by one stage. Shifting is from MSB to LSB and occurs on the rising edge of TCK. Update-DR The update data register state is used to load a test register's parallel output latch. In general, the output latches are used to control the device. For example, for the EXTEST instruction, the boundary scan test register's parallel output latches are used to control the device's outputs. The parallel output latches are updated on the falling edge of TCK. Capture-IR The capture instruction register state is used to load the instruction register with a fixed instruction. The load occurs on the rising edge of TCK. Shift-IR The shift instruction register state is used to shift both the instruction register and the selected test data registers by one stage. Shifting is from MSB to LSB and occurs on the rising edge of TCK. 245 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Update-IR The update instruction register state is used to load a new instruction into the instruction register. The new instruction must be scanned in using the Shift-IR state. The load occurs on the falling edge of TCK. The Pause-DR and Pause-IR states are provided to allow shifting through the test data and/or instruction registers to be momentarily paused. Boundary Scan Instructions The following is a description of the standard instructions. Each instruction selects a serial test data register path between input, TDI and output, TDO. BYPASS The bypass instruction shifts data from input, TDI to output, TDO with one TCK clock period delay. The instruction is used to bypass the device. EXTEST The external test instruction allows testing of the interconnection to other devices. When the current instruction is the EXTEST instruction, the boundary scan register is place between input, TDI and output, TDO. Primary device inputs can be sampled by loading the boundary scan register using the Capture-DR state. The sampled values can then be viewed by shifting the boundary scan register using the Shift-DR state. Primary device outputs can be controlled by loading patterns shifted in through input TDI into the boundary scan register using the Update-DR state. SAMPLE The sample instruction samples all the device inputs and outputs. For this instruction, the boundary scan register is placed between TDI and TDO. Primary device inputs and outputs can be sampled by loading the boundary scan register using the Capture-DR state. The sampled values can then be viewed by shifting the boundary scan register using the Shift-DR state. IDCODE The identification instruction is used to connect the identification register between TDI and TDO. The device's identification code can then be shifted out using the Shift-DR state. 246 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER STCTEST The single transport chain instruction is used to test out the TAP controller and the boundary scan register during production test. When this instruction is the current instruction, the boundary scan register is connected between TDI and TDO. During the Capture-DR state, the device identification code is loaded into the boundary scan register. The code can then be shifted out output, TDO using the Shift-DR state. INTEST The internal test instruction is used to exercise the device's internal core logic. When this instruction is the current instruction, the boundary scan register is connected between TDI and TDO. During the Update-DR state, patterns shifted in on input, TDI are used to drive primary inputs. During the Capture-DR state, primary outputs are sampled and loaded into the boundary scan register. 247 PM7366 FREEDM-8 DATA SHEET PMC-970930 14 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER FUNCTIONAL TIMING 14.1 Receive Link Input Timing The timing relationship of the receive clock (RCLK[n]) and data (RD[n]) signals of an unchannelised link is shown in Figure 22. The receive data is viewed as a contiguous serial stream. There is no concept of time-slots in an unchannelised link. Every eight bits are grouped together into a byte with arbitrary alignment. The first bit received (B1 in Figure 22) is deemed the most significant bit of an octet. The last bit received (B8) is deemed the least significant bit. Bits that are to be processed by the FREEDM-8 are clocked in on the rising edge of RCLK[n]. Bits that should be ignored (X in Figure 22) are squelched by holding RCLK[n] quiescent. In Figure 22, the quiescent period is shown to be a low level on RCLK[n]. A high level, effected by extending the high phase of the previous valid bit, is also acceptable. Selection of bits for processing is arbitrary and is not subject to any byte alignment nor frame boundary considerations. Figure 22 - Unchannelised Receive Link Timing RCLK[n] RD[n] B1 B2 B3 B4 X B5 X X X B6 B7 B8 B1 X The timing relationship of the receive clock (RCLK[n]) and data (RD[n]) signals of a channelised T1 link is shown in Figure 23. The receive data stream is a T1 frame with a single framing bit (F in Figure 23) followed by octet bound time-slots 1 to 24. RCLK[n] is held quiescent during the framing bit. The RD[n] data bit (B1 of TS1) clocked in by the first rising edge of RCLK[n] after the framing bit is the most significant bit of time-slot 1. The RD[n] bit (B8 of TS24) clocked in by the last rising edge of RCLK[n] before the framing bit is the least significant bit of time-slot 24. In Figure 23, the quiescent period is shown to be a low level on RCLK[n]. A high level, effected by extending the high phase of bit B8 of time-slot TS24, is equally acceptable. In channelised T1 mode, RCLK[n] can only be gapped during the framing bit. It must be active continuously at 1.544 MHz during all time-slot bits. Time-slots can be ignored by setting the PROV bit in the corresponding word of the receive channel provision RAM in the RCAS block to low. Figure 23 - Channelised T1 Receive Link Timing RCLK[n] RD[n] B7 B8 F B1 B2 B3 B4 B5 B6 B7 B8 B1 B2 B3 TS 24 TS 1 248 TS 2 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The timing relationship of the receive clock (RCLK[n]) and data (RD[n]) signals of a channelised E1 link is shown in Figure 24. The receive data stream is an E1 frame with a singe framing byte (F1 to F8 in Figure 24) followed by octet bound time-slots 1 to 31. RCLK[n] is held quiescent during the framing byte. The RD[n] data bit (B1 of TS1) clocked in by the first rising edge of RCLK[n] after the framing byte is the most significant bit of time-slot 1. The RD[n] bit (B8 of TS31) clocked in by the last rising edge of RLCLK[n] before the framing byte is the least significant bit of time-slot 31. In Figure 24, the quiescent period is shown to be a low level on RCLK[n]. A high level, effected by extending the high phase of bit B8 of time-slot TS31, is equally acceptable. In channelised E1 mode, RCLK[n] can only be gapped during the framing byte. It must be active continuously at 2.048 MHz during all time-slot bits. Time-slots can be ignored by setting the PROV bit in the corresponding word of the receive channel provision RAM in the RCAS block to low. Figure 24 - Channelised E1 Receive Link Timing RCLK[n] RD[n] B6 B7 B8 F1 F2 F3 F4 F5 F6 F7 F8 B1 B2 B3 B4 B5 B6 B7 B8 B1 B2 B3 B4 TS 31 FAS / NFAS TS 1 TS 2 14.2 Transmit Link Output Timing The timing relationship of the transmit clock (TCLK[n]) and data (TD[n]) signals of a unchannelised link is shown in Figure 25. The transmit data is viewed as a contiguous serial stream. There is no concept of time-slots in an unchannelised link. Every eight bits are grouped together into a byte with arbitrary byte alignment. Octet data is transmitted from most significant bit (B1 in Figure 25) and ending with the least significant bit (B8 in Figure 25). Bits are updated on the falling edge of TCLK[n]. A transmit link may be stalled by holding the corresponding TCLK[n] quiescent. In Figure 25, bits B5 and B2 are shown to be stalled for one cycle while bit B6 is shown to be stalled for three cycles. In Figure 25, the quiescent period is shown to be a low level on TCLK[n]. A high level, effected by extending the high phase of the previous valid bit, is also acceptable. Gapping of TCLK[n] can occur arbitrarily without regard to byte nor frame boundaries. Figure 25 - Unchannelised Transmit Link Timing TCLK[n] TD[n] B1 B2 B3 B4 B5 B6 B7 B8 B1 B2 The timing relationship of the transmit clock (TCLK[n]) and data (TD[n]) signals of a channelised T1 link is shown in Figure 26. The transmit data stream is a T1 frame with a single framing bit (F in Figure 26) followed by octet bound time-slots 1 to 24. TCLK[n] is held quiescent during the framing bit. The most significant bit of each time-slot is transmitted first (B1 in Figure 26). The 249 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER least significant bit of each time-slot is transmitted last (B8 in Figure 26). The TD[n] bit (B8 of TS24) before the framing bit is the least significant bit of time-slot 24. In Figure 26, the quiescent period is shown to be a low level on TCLK[n]. A high level, effected by extending the high phase of bit B8 of time-slot TS24, is equally acceptable. In channelised T1 mode, TCLK[n] can only be gapped during the framing bit. It must be active continuously at 1.544MHz during all time-slot bits. Time-slots that are not provisioned to belong to any channel (PROV bit in the corresponding word of the transmit channel provision RAM in the TCAS block set low) transmit the contents of the Idle Fill Time-slot Data register. Figure 26 - Channelised T1 Transmit Link Timing TCLK[n] TD[n] B7 B8 TS 24 B1 B2 B3 B4 B5 B6 B7 B8 B1 B2 B3 F TS 1 TS 2 The timing relationship of the transmit clock (TCLK[n]) and data (TD[n]) signals of a channelised E1 link is shown in Figure 27. The transmit data stream is an E1 frame with a singe framing byte (FAS/NFAS in Figure 27) followed by octet bound time-slots 1 to 31. TCLK[n] is held quiescent during the framing byte. The most significant bit of each time-slot is transmitted first (B1 in Figure 27). The least significant bit of each time-slot is transmitted last (B8 in Figure 27). The TD[n] bit (B8 of TS31) before the framing byte is the least significant bit of time-slot 31. In Figure 27, the quiescent period is shown to be a low level on TCLK[n]. A high level, effected by extending the high phase of bit B8 of time-slot 31, is equally acceptable. In channelised E1 mode, TCLK[n] can only be gapped during the framing byte. It must be active continuously at 2.048 MHz during all time-slot bits. Time-slots that are not provisioned to belong to any channel (PROV bit in the corresponding word of the transmit channel provision RAM in the TCAS block set low) transmit the contents of the Idle Time-slot Fill Data register. Figure 27 - Channelised E1 Transmit Link Timing TCLK[n] TD[n] B6 B7 B8 TS 31 B2 B3 B4 B5 B6 B7 B8 B1 B2 B3 B4 B1 FAS / NFAS TS 1 TS 2 14.3 PCI Interface A PCI burst read cycle is shown In Figure 28. The cycle is valid for target and initiator accesses. The target is responsible for incrementing the address during the data burst. The 'T' symbol 250 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER stands for a turn around cycle. A turn around cycle is required on all signals which can be driven by more than one agent. During Clock 1, the initiator drives FRAMEB to indicate the start of a cycle. It also drives the address onto the AD[31:0] bus and drives the C/BEB[3:0] lines with the read command. In the example below, the command would indicate a burst read. The IRDYB, TRDYB and DEVSELB signals are in turnaround mode (i.e. no agent is driving the signals for this clock cycle). This cycle on the PCI bus is called the address phase. During Clock 2, the initiator ceases to drive the AD[31:0] bus in order that the target can drive it in the next cycle. The initiator also drives the C/BEB[3:0] lines with the byte enables for the read data. IRDYB is driven active by the initiator to indicate it is ready to accept the data transfer. All subsequent cycles on the PCI bus are called data phases. During Clock 3, the target claims the transaction by driving DEVSELB active. It also places the first data word onto the AD[31:0] bus and drives TRDYB to indicate to the initiator that the data is valid. During Clock 4, the initiator latches in the first data word. The target negates TRDYB to indicate to the initiator that it is not ready to transfer another data word. During Clock 5, the target places the second data word onto the AD[31:0] bus and drives TRDYB to indicate to the initiator that the data is valid. During Clock 6, the initiator latches the second data word and negates IRDYB to indicate to the target that it is not ready for the next transfer. The target shall drive the third data word until the initiator accepts it. During Clock 7, the initiator asserts IRDYB to indicate to the target it is ready for the third data word. It also negates FRAMEB since this shall be the last transfer. During Clock 8, the initiator latches in the last word and negates IRDYB. The target, having seen FRAMEB negated in the last clock cycle, negates TRDYB and DEVSELB. All of the above signals shall be driven to their inactive state in this clock cycle, except for FRAMEB which shall be tristated. The target shall stop driving the AD[31:0] bus and the initiator shall stop driving the C/BEB[3:0] bus; this shall be the turnaround cycle for these signals. 251 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 28 - PCI Read Cycle 1 2 3 4 5 6 7 8 9 PCICLK T FRAMEB AD[31:0] Address T C/BEB[3:0] Bus Cmd Byte Enable IRDYB TRDYB DEVSELB Data 1 Data 2 Byte Enable Data 3 T Byte Enable T T T T A PCI burst write transaction is shown in Figure 29. The cycle is valid for target and initiator accesses. The target is responsible for incrementing the address for the duration of the data burst. The 'T' symbol stands for a turn around cycle. A turn around cycle is required on all signals which can be driven by more than one agent. During clock 1, the initiator drives FRAMEB to indicate the start of a cycle. It also drives the address onto the AD[31:0] bus and drives the C/BEB[3:0] lines with the write command (in the above example the command would indicate a burst write). The IRDYB, TRDYB and DEVSELB signals are in turnaround mode (no agent is driving the signals for this clock cycle). This cycle on the PCI bus is called the address phase. During clock 2, the initiator ceases to drive the address onto the AD[31:0] bus and starts driving the first data word. The initiator also drives the C/BEB[3:0] lines with the byte enables for the write data. IRDYB is driven active by the initiator to indicate it is ready to accept the data transfer. The target claims the transaction by driving DEVSELB active and drives TRDYB to indicate to the initiator that it is ready to accept the data. All subsequent cycles on the PCI bus are called data phases. During clock 3, the target latches in the first data word. The initiator starts to drive the next data word onto the AD[31:0] lines. During clock 4, the target latches in the second data word. Both the initiator and the target indicate that they are not ready to transfer any more data by negating the ready lines. During clock 5, the initiator is ready to transfer the next data word so it drives the AD[31:0] lines with the third data word and asserts IRDYB. The initiator negates FRAMEB since this is the last data phase of this cycle. The target is still not ready so a wait state shall be added. 252 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER During clock 6, the target is still not ready so another wait state is added. During clock 7, the target asserts TRDYB to indicate that it is ready to complete the transfer. During clock 8, the target latches in the last word and negates TRDYB and DEVSELB, having seen FRAMEB negated previously. The initiator negates IRDYB. All of the above signals shall be driven to their inactive state in this clock cycle except for FRAMEB which shall be tri-stated. Figure 29 - PCI Write Cycle 1 2 3 4 5 6 7 8 9 PCICLK T FRAMEB AD[31:0] C/BEB[3:0] IRDYB TRDYB DEVSELB Address Data 1 Data 2 Data 3 Bus Cmd Byte En Byte En Byte Enable T T T T T The PCI Target Disconnect (Figure 30) illustrates the case when the target wants to prematurely terminate the current cycle. Note, when the FREEDM-8 is the target, it never prematurely terminates the current cycle. A target can terminate the current cycle by asserting the STOPB signal to the initiator. Whether data is transferred or not depends on the state of the ready signals at the time that the target disconnects. If the FREEDM-8 is the initiator and the target terminates the current access, the FREEDM-8 will retry the access after two PCI bus cycles. During clock 1, an access is in progress. During clock 2, the target indicates that it wishes to disconnect by asserting STOPB. Data may be transferred depending on the state of the ready lines. During clock 3, the initiator negates FRAMEB to signal the end of the cycle. During clock 4, the target negates STOPB and DEVSELB in response to the FRAMEB signal being negated. 253 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 30 - PCI Target Disconnect 1 2 3 4 5 6 PCICLK T FRAMEB STOPB DEVSELB The PCI Target Abort Diagram (Figure 31) illustrates the case when the target wants to abort the current cycle. Note, when the FREEDM-8 is the target, it never aborts the current cycle. A target abort is an indication of a serious error and no data is transferred. A target can terminate the current cycle by asserting STOPB and negating DEVSELB. If the FREEDM-8 is the initiator and the target aborts the current access, the abort condition is reported to the PCI Host. During clock 1, a cycle is in progress. During clock 2, the target negates DEVSELB and TRDYB and asserts STOPB to indicate an abort condition to the initiator. During clock 3, the initiator negates FRAMEB in response to the abort request. During clock 4, the target negates STOPB signal in response to the FRAMEB signal being negated. Figure 31 - PCI Target Abort 1 2 3 4 5 PCICLK T FRAMEB TRDYB STOPB DEVSELB 254 6 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The PCI Bus Request Cycle Diagram (Figure 32) illustrates the case when the initiator is requesting the bus from the bus arbiter. When the FREEDM-8 is the initiator, it requests the PCI bus by asserting its REQB output to the central arbiter. The arbiter grants the bus to the FREEDM-8 by asserting the GNTB line. The FREEDM-8 will wait till both the FRAMEB and IRDYB lines are idle before starting its access on the PCI bus. The arbiter can remove the GNTB signal at any time, but the FREEDM-8 will complete the current transfer before relinquishing the bus. Figure 32 - PCI Bus Request Cycle 1 2 3 4 5 6 PCICLK REQB GNTB T FRAMEB The PCI Initiator Abort Termination Diagram (Figure 33) illustrates the case when the initiator aborts a transaction on the PCI bus. An initiator may terminate a cycle if no target claims it within five clock cycles. A target may not have responded because it was incapable of dealing with the request or a bad address was generated by the initiator. IRDYB must be valid one clock after FRAMEB is deasserted as in a normal cycle. When the FREEDM-8 is the initiator and aborts the transaction, it reports the error condition to the PCI Host. Figure 33 - PCI Initiator Abort Termination 1 2 3 4 5 6 7 PCICLK T FRAMEB TRDYB IRDYB DEVSELB T T T 255 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER The PCI Exclusive Lock Cycle Diagram (Figure 34) illustrates the case when the current initiator locks the PCI bus. The FREEDM-8 will never initiate an lock, but will behave appropriately when acting as a target. During clock 1, the present initiator has gained access of the LOCKB signal and the PCI bus. The first cycle of a locked access must be a read cycle. The initiator asserts FRAMEB and drives the address of the target on the AD[31:0] lines. During clock 2, the present initiator asserts LOCKB to indicate to the target that a locked cycle is in progress. During clock 3, the target samples the asserted LOCKB signal and marks itself locked. The data cycle has to complete in order for the lock to be maintained. If for some reason the cycle was aborted, the initiator must negate LOCKB. During clock 4, the data transfer completes and the target is locked. During clock 6, another initiator may use the PCI bus but it cannot use the LOCKB signal. If the other initiator attempts to access the locked target that it did not lock, the target would reject the access. During clock 7, the same initiator that locked this target accesses the target. The initiator asserts FRAMEB and negates LOCKB to re-establish the lock. During clock 8, the target samples LOCKB deasserted and locks itself. During clock 9, the initiator does not want to continue the lock so it negates LOCKB. The target samples LOCKB and FRAMEB deasserted it removes its lock. Figure 34 - PCI Exclusive Lock Cycle 1 2 3 4 5 6 7 8 9 PCICLK T FRAMEB AD[31:0] LOCKB IRDYB TRDYB DEVSELB Address Data T T Address T T T T T T T 256 Data T PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Fast back-to-back transactions are used by an initiator to conduct two consecutive transactions on the PCI bus without the required idle cycle between them. This can only occur if there is a guarantee that there will be no contention between the initiator or targets involved in the two transactions. In the first case, an initiator may perform fast back-to-back transactions if the first transaction is a write and the second transaction is to the same target. All targets must be able to decode the above transaction. In the second case, all of the targets on the PCI bus support fast back-to-back transactions, as indicated in the PCI Status configuration register. The FREEDM-8 only supports the first type of fast back-to-back transactions and is shown in Figure 35. During clock 1, the initiator drives FRAMEB to indicate the start of a cycle. It also drives the address onto the AD[31:0] bus and drives the C/BEB[3:0] lines with the write command. In this example the command would indicate a single write. The IRDYB, TRDYB and DEVSELB signals are in turnaround mode and are not being driven for this clock cycle. This cycle on the PCI bus is called the address phase. During clock 2, the initiator ceases to drive the address onto the AD[31:0] bus and starts driving the data element. The initiator also drives the C/BEB[3:0] lines with the byte enables for the write data. IRDYB is driven active by the initiator to indicate that the data is valid. The initiator negates FRAMEB since this the last data phase of this cycle. The target claims the transaction by driving DEVSELB active and drives TRDYB to indicate to the initiator that it is ready to accept the data. During clock 3, the target latches in the data element and negates TRDYB and DEVSELB, having seen FRAMEB negated previously. The initiator negates IRDYB and drives FRAMEB to start the next cycle. It also drives the address onto the AD[31:0] bus and drives the C/BEB[3:0] lines with the write command. In this example the command would indicate a burst write. During clock 4, the initiator ceases to drive the address onto the AD[31:0] bus and starts driving the first data element. The initiator also drives the C/BEB[3:0] lines with the byte enables for the write data. IRDYB is driven active by the initiator to indicate that the data is valid. The target claims the transaction by driving DEVSELB active and drives TRDYB to indicate to the initiator that it is ready to accept the data. During clock 5, the initiator is ready to transfer the next data element so it drives the AD[31:0] lines with the second data element. The initiator negates FRAMEB since this is the last data phase of this cycle. The target accepts the first data element and negates TRDYB to indicate its is not ready for the next data element. During clock 6, the target is still not ready so a wait state shall be added. During clock 7, the target asserts TRDYB to indicate that it is ready to complete the transfer. During clock 8, the target latches in the last element and negates TRDYB and DEVSELB, having seen FRAMEB negated previously. The initiator negates IRDYB. All of the above signals shall be driven to their inactive state in this clock cycle, except for FRAMEB which shall be tri-stated. The 257 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER target stops driving the AD[31:0] bus and the initiator stops driving the C/BEB[3:0] bus. This shall be the turnaround cycle for these signals. Figure 35 - PCI Fast Back to Back 1 2 3 4 5 6 7 8 9 PCICLK T FRAMEB AD[31:0] C/BEB[3:0] IRDYB TRDYB DEVSELB Address Data Address Data Bus Cmd Byte En Bus Cmd T Data T Byte Enable T T T 14.4 BERT Interface The timing relationship between the receive link clock and data (RCLK[n] / RD[n]) and the receive BERT port signals (RBCLK / RBD) is shown in Figure 36. The selected RCLK[n] is placed on RBCLK after an asynchronous delay. The selected receive link data (RD[n]) is sampled on the rising edge of the associated RCLK[n] and transferred to RBD on the falling edge of RBCLK. Figure 36 - Receive BERT Port Timing RCLK[n] RD[n] B1 B2 B3 B4 X B5 X X X B6 B7 B8 B1 X RBCLK RBD B1 B2 B3 B4 B5 B6 B7 B8 B1 The timing relationship between the transmit link clock and data (TCLK[n] / TD[n]) and the transmit BERT port signals (TBCLK / TBD) is shown in Figure 37. TCLK[n] is shown to have an arbitrary gapping. When TCLK[n] is quiescent, TBD is ignored (X in Figure 37). The selected TCLK[n] is buffered and placed on TBCLK. The transmit BERT data (TBD) is sampled on the rising edge of the TBCLK and transferred to the selected TD[n] on the falling edge of TCLK[n]. 258 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 37 - Transmit BERT Port Timing TCLK[n] TBCLK TBD TD[n] B1 B2 B3 B4 X B5 X X X B6 B7 B8 B1 X B2 B1 B2 B3 B4 B5 259 B6 B7 B8 B1 PM7366 FREEDM-8 DATA SHEET PMC-970930 15 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER ABSOLUTE MAXIMUM RATINGS Maximum rating are the worst case limits that the device can withstand without sustaining permanent damage. They are not indicative of normal operating conditions. Table 32 - FREEDM-8 Absolute Maximum Ratings Ambient Temperature under Bias -40C to +85C Storage Temperature -40C to +125C Supply Voltage (VDD) -0.3V to +4.6V Bias Voltage (VBIAS) (VDD - 0.3) to +5.5V Voltage on Any Pin -0.3V to VBIAS + 0.3V Static Discharge Voltage 1000 V Latch-Up Current 100 mA DC Input Current 20 mA Lead Temperature +230C Absolute Maximum Junction Temperature +150C 260 PM7366 FREEDM-8 DATA SHEET PMC-970930 16 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER D.C. CHARACTERISTICS (TA = -40C to +85C, VDD = 3.3 V 10%) Table 33 - FREEDM-8 D.C. Characteristics Symbol Parameter Min Typ Max Units Conditions 3.0 3.3 3.6 Volts Note 5. 5.0 5.5 Volts Note 5. VDD Power Supply VBIAS 5V Bias Supply VDD VIL PCI Input Low Voltage -0.2 0.8 Volts Guaranteed Input LOW Voltage for PCI inputs. VIH PCI Input High Voltage 2.0 VBIAS Volts Guaranteed Input HIGH Voltage for PCI inputs. VOL Output or Bi-directional Low Voltage 0.4 Volts IOL = -4 mA for all outputs except TBCLK, RBCLK, RBD, PCICLKO, PCIINTB, where IOL = -6 mA and TD[2:0], where IOL = -8 mA. Notes 3, 5. VOH Output or Bi-directional High Voltage 2.4 Volts IOH = 4 mA for all outputs except TBCLK, RBCLK, RBD, PCICLKO, PCIINTB, where IOH = 6 mA and TD[2:0], where IOH = 8 mA. Notes 3, 5. VT+ Schmitt Triggered Input High Voltage 2.0 VBIAS Volts VT- Schmitt Triggered Input Low Voltage -0.2 0.8 Volts IILPU Input Low Current 10 45 100 A VIL = GND, Notes 1, 3, 5. IIHPU Input High Current -10 0 +10 A VIH = VDD, Notes 1, 3 IIL Input Low Current -10 0 +10 A VIL = GND, Notes 2, 3 IIH Input High Current -10 0 +10 A VIH = VDD, Notes 2, 3 CIN Input Capacitance 5 pF Excludes package. Package typically 2 pF. Note 5. COUT Output Capacitance 5 pF All pins. Excludes package. Package typically 2 pF. Note 5. 0.26 2.52 261 PM7366 FREEDM-8 DATA SHEET PMC-970930 Symbol ISSUE 3 Parameter Min FRAME ENGINE AND DATA LINK MANAGER Typ Max Units Conditions CIO Bi-directional Capacitance 5 pF All pins. Excludes package. Package typically 2 pF. Note 5. LPIN Pin Inductance 2 nH All pins. Note 5. IDDOP Operating Current. mA VDD = 3.6V, Outputs unloaded. Aggregate link clock rate = 64 MHz 285 356.7 Notes on D.C. Characteristics: 1. Input pin or bi-directional pin with internal pull-up resistor. 2. Input pin or bi-directional pin without internal pull-up resistor 3. Negative currents flow into the device (sinking), positive currents flow out of the device (sourcing). 4. Input pin or bi-directional pin with internal pull-down resistor. 5. Typical values are given as a design aid. The product is not tested to the typical values given in the data sheet. 262 PM7366 FREEDM-8 DATA SHEET PMC-970930 17 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER FREEDM-8 TIMING CHARACTERISTICS (TA = -40C to +85C, VDD = 3.3 V 10%, VBIAS = 5.0V 10%) Table 34 - FREEDM-8 Link Input (Figure 38, Figure 39) Symbol Description Min Max Units RCLK[7:0] Frequency (See Note 3) 1.542 1.546 MHz RCLK[7:0] Frequency (See Note 4) 2.046 2.05 MHz RCLK[2:0] Frequency (See Note 5) 52 MHz RCLK[7:3] Frequency (See Note 5) 10 MHz RCLK[7:0] Duty Cycle 40 60 % SYSCLK Frequency 25 33 MHz SYSCLK Duty Cycle 40 60 % tSRD RD[7:3] Set-Up Time 5 ns tHRD RD[7:3] Hold Time 5 ns tSRD RD[2:0] Set-Up Time 2 ns tHRD RD[2:0] Hold Time 2 ns tSTBD TBD Set-Up Time (See Note 6) 15 ns tHTBD TBD Hold Time 0 ns Notes on Input Timing: 1. When a set-up time is specified between an input and a clock, the set-up time is the time in nanoseconds from the 1.4 Volt point of the input to the 1.4 Volt point of the clock. 2. When a hold time is specified between an input and a clock, the hold time is the time in nanoseconds from the 1.4 Volt point of the clock to the 1.4 Volt point of the input. 3. Applicable only to channelised T1 links and measured between framing bits. 4. Applicable only to channelised E1 links and measured between framing bytes. 5. Applicable only to unchannelised links of any format and measured between any two RCLK rising edges. 6. TBD set-up time is measured with a 20 pF load on TBCLK. The set-up time increases by 1 ns for each 10 pF of extra load on TBCLK. 263 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 38 - Receive Link Input Timing RCLK[n] tS RD tH RD tS TBD tH TBD RD[n] Figure 39 - BERT Input Timing TBCLK TBD Table 35 - FREEDM-8 Link Output (Figure 40, Figure 41) Symbol Description Min Max Units TCLK[7:0] Frequency (See Note 4) 1.542 1.546 MHz TCLK[7:0] Frequency (See Note 5) 2.046 2.05 MHz TCLK[2:0] Frequency (See Note 6) 52 MHz TCLK[7:3] Frequency (See Note 6) 10 MHz TCLK[7:0] Duty Cycle 40 60 % tPTD TCLK[2:0] Low to TD[2:0] Valid 3 15 ns tPTD TCLK[7:3] Low to TD[7:3] Valid 5 27 ns tPRBD RBCLK Low to RBD Valid -5 5 ns 264 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Notes on Output Timing: 1. Output propagation delay time is the time in nanoseconds from the 1.4 Volt point of the reference signal to the 1.4 Volt point of the output. 2. Maximum and minimum output propagation delays are measured with a 50 pF load on all the outputs, except for PCI Bus outputs and TD[2:0] outputs. For PCI Bus outputs, maximum output propagation delays are measured with a 50 pF load while minimum output propagation delays are measured with a 0 pF load. For TD[2:0] outputs, propagation delays are measured with a 20 pF load. Maximum propagation delay for TD[2:0] increases by 1.0 ns for each 10 pF of extra load. 3. Output propagation delays of signal outputs that are specified in relation to a reference output are measured with a 50 pF load on both the signal output and the reference output. 4. Applicable only to channelised T1 links and measured between framing bits. 5. Applicable only to channelised E1 links and measured between framing bytes. 6. Applicable only to unchannelised links of any format and measured between any two TCLK rising edges. 7. Output tri-state delay is the time in nanoseconds from the 1.4 Volt point of the reference signal to the point where the total current delivered through the output is less than or equal to the leakage current. Figure 40 - Transmit Link Output Timing TCLK[n] tP TD TD[n] 265 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 41 - BERT Output Timing RBCLK tP RBD RBD Table 36 - PCI Interface (Figure 42) Symbol Description Min PCICLK Frequency Max Units 33 MHz 60 % PCICLK Duty Cycle 40 tSPCI All PCI Input and Bi-directional Set-up time to PCICLK 7 ns tHPCI All PCI Input and Bi-directional Hold time to PCICLK 0 ns tPPCI PCICLK to all PCI Outputs Valid 2 tZPCI All PCI Output PCICLK to Tri-state tZNPCI All PCI Output Tri-state from PCICLK to active 266 2 11 ns 28 ns ns PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 42 - PCI Interface Timing PCICLK tS PCI tH PCI PCI INPUT tP PCI PCI OUTPUT tZ PCI TRISTATE OUTPUT PCI Data Valid tZN PCI PCI TRISTATE OUTPUT Data Valid Table 37 - JTAG Port Interface (Figure 43) Symbol Description Min TCK Frequency Max Units 1 MHz 60 % TCK Duty Cycle 40 tSTMS TMS Set-up time to TCK 50 ns tHTMS TMS Hold time to TCK 50 ns tSTDI TDI Set-up time to TCK 50 ns tHTDI TDI Hold time to TCK 50 ns tPTDO TCK Low to TDO Valid 2 267 50 ns PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 43 - JTAG Port Interface Timing TCK tS TMS tH TMS tS TDI tH TDI TMS TDI TCK tP TDO TDO 268 PM7366 FREEDM-8 DATA SHEET PMC-970930 18 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER ORDERING AND THERMAL INFORMATION Table 38 - FREEDM-8 Ordering Information PART NO. DESCRIPTION PM7366-BI 256 Enhanced Ball Grid Array (SBGA) PM7366-PI 272 Plastic Ball Grid Array (PBGA) Table 39 - FREEDM-8 Thermal Information PART NO. AMBIENT TEMPERATURE Theta Ja Theta Jc PM7366-BI -40C to +85C 24 C/W 2 C/W PM7366-PI -40C to +85C 28 C/W 7 C/W 269 PM7366 FREEDM-8 DATA SHEET PMC-970930 19 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER MECHANICAL INFORMATION Figure 44 - 256 Pin Enhanced Ball Grid Array (SBGA) D1, M 1 0.127 A -A- A1 BALL CORNER D A1 BALL CORNER 20 18 19 -B.30 A C A S B 14 16 17 15 12 13 10 11 8 9 6 7 4 5 2 3 1 S A B C D b A1 BALL I.D. INK MARK E F G H J K L E E1, N M N P R T U A V W e 0.127 Y A e TOP VIEW A BOTTOM VIEW DIE SIDE A A2 bbb aaa P ccc C -C- SIDE VIEW A1 SEATING PLANE ddd A-A SECTION VIEW Notes: 1) ALL DIMENSIONS IN MILLIMETER. 2) DIMENSION aaa DENOTES COPLANARITY 3) DIMENSION bbb DENOTES PARALLEL 4) DIMENSION ccc DENOTES FLATNESS PACKAGE TYPE: BODY SIZE: Dim. 256 PIN THERMAL BALL GRID ARRAY 27 x 27 x 1.45 MM A A1 A2 D D1 E E1 0. 56 0. 76 26. 90 24. 03 26. 90 24. 03 Min. 1. 32 Nom. 1. 45 0. 63 0. 82 27. 00 24. 13 27. 00 24. 13 Max. 1. 58 0. 70 0. 88 27. 10 24. 23 27. 10 24. 23 M,N e b aaa bbb ccc 0. 60 20x20 1. 27 0. 75 0. 90 270 0. 15 0. 15 0. 20 ddd P 0. 15 0. 20 0. 33 0. 30 0. 50 0. 35 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER Figure 45 - 272 Pin Plastic Ball Grid Array (PBGA) 0.20 D (4X ) A1 BALL CORNER Px A D1 B A1 BALL CORNER 0.30 M C A B 0.10 M C 20 18 19 16 17 14 15 12 13 10 11 8 9 6 7 4 5 2 3 1 b A B C D E F G H J K L M N P R T U V W Y A1 BALL INDICATOR E1 E e 45o CHAMFER 4 PLACES J Py e I TOP VIEW "d" DIA. 3 PLACES BOTTOM VIEW 300 TYP +/- 10 A A2 bbb C aaa C C A1 c SIDE VIEW SEATING PLANE NOTES: 1) A LL DIMENSIONS IN MILLIMETER. 2) DIMENSION aaa DENOTES COPLA NA RITY . 3) DIMENSION bbb DENOTES PA RA LLEL. 1.92 2.12 0.50 1.12 26.80 23.50 26.80 23.50 0.60 2.13 2.33 0.60 1.17 27.00 24.00 27.00 24.00 1.435 1.435 0.76 2.32 2.54 0.70 1.22 27.20 24.70 27.20 24.70 0.90 271 0.36 0.56 1.0 1.27 24.03 24.03 24.13 24.13 24.23 24.23 0.15 0.35 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER NOTES 272 PM7366 FREEDM-8 DATA SHEET PMC-970930 ISSUE 3 FRAME ENGINE AND DATA LINK MANAGER CONTACTING PMC-SIERRA, INC. PMC-Sierra, Inc. 105-8555 Baxter Place Burnaby, BC Canada V5A 4V7 Tel: (604) 415-6000 Fax: (604) 415-6200 Document Information: Corporate Information: Application Information: Web Site: document@pmc-sierra.com info@pmc-sierra.com apps@pmc-sierra.com http://www.pmc-sierra.com None of the information contained in this document constitutes an express or implied warranty by PMC-Sierra, Inc. as to the sufficiency, fitness or suitability for a particular purpose of any such information or the fitness, or suitability for a particular purpose, merchantability, performance, compatibility with other parts or systems, of any of the products of PMC-Sierra, Inc., or any portion thereof, referred to in this document. PMC-Sierra, Inc. expressly disclaims all representations and warranties of any kind regarding the contents or use of the information, including, but not limited to, express and implied warranties of accuracy, completeness, merchantability, fitness for a particular use, or non-infringement. In no event will PMC-Sierra, Inc. be liable for any direct, indirect, special, incidental or consequential damages, including, but not limited to, lost profits, lost business or lost data resulting from any use of or reliance upon the information, whether or not PMC-Sierra, Inc. has been advised of the possibility of such damage. (c) 1998 PMC-Sierra, Inc PM-970930 (r3) PMC-Sierra, Inc. ref: PM970867 (r4) Issue date: July 1999 105 - 8555 Baxter Place Burnaby, BC Canada V5A 4V7 604 .415.6000