UPD24D Series
• SIP SSR
• 2 Relays in one package with independent control input
• Ratings per channel of 15A @ 280 VAC
• PCB Mount Package or Panel Mount quick connect terminals (F option)
• SCR output for heavy industrial loads
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
• Low Leakage (snubberless) output
PRODUCT SELECTION
Control Voltage 15A 15A
3-32 VDC UPD2415D UPD2415D-10
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description (Per Channel) UPD2415D UPD2415D-10
Operating Voltage (47-440Hz) [Vrms] 24-280 24-280
Maximum Load Current [Arms](3) 15 15
Minimum Load Current [mArms] 150 150
Transient Overvoltage [Vpk] 600 600
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 115/120 115/120
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 1.4
Thermal Resistance Junction to Case [°C/W] 1.2 1.2
Maximum I² t for fusing (50/60Hz, 1/2 cycle) [A² sec] 66/60 66/60
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500
Minimum Power Factor (with Maximum Load) 0.5 0.5
INPUT SPECIFICATIONS (1)
Description UPD2415D UPD2415D-10
Control Voltage Range 3-15 VDC 3-15 VDC
Must Turn On Voltage 3.0 VDC 3.0 VDC
Must Turn Off Voltage 1.0 VDC 1.0 VDC
Typical Input Current @ 12 VDC 36 mAdc 36 mAdc
Nominal Input Impedance 300 Ohm 300 Ohm
Maximum Turn-On Time [msec] 1/2 Cycle 0.02
Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms
Minimum Insulation Resistance (@ 500 VDC) 109 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80°C
Ambient Storage Temperature Range -40 to 125°C
Weight (typical) 1.44 oz. (40.8g)
GENERAL NOTES
1) All parameters at 25°C and per section unless otherwise specified.
2) Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, see following pages for derating curves.
MECHANICAL SPECIFICATIONS
WIRING DIAGRAM
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
Rev. 082812
ANNEX - ENVIROMENTAL INFORMATION
