SMD Multilayer Chip Varistor
AMCV-0603
STANDARD SPECIFICATIONS:
APPLICATIONS:
FEATURES:
1.6 x 0.8 x 0.8 mm.
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 11.30.12
Visit
www.abracon.com
for Terms & Conditions of Sale
ISO 9001:2008
Operating Temperature: -55˚C ~ +125˚
C
• SMD type, small size suitable for high density mounting
• Excellent clamping ratio and strong capability of voltage surge suppression
• Excellent solderability (Ni, Sn plating)
• Transient voltage protection and voltage surge suppression for
LED lighting
• Suitable for LCD-TV, STB, Switch, Router, PLC, Security
System, smart meters, mobile phones
• Suppressing Induced / switching over-voltage caused by
lightning and power
• Protecting DC-DC Module, I/O ports, IC driver
Part Number Max. Working
Voltage
Varistor
Voltage
Max. Clamping
Voltage
Rated Single Pulse
Transient
Typical
Capacitance
Test Condition
<20μA
@1mA
DC 8/20μs ESD Energy
10/1000μs
Peak
Current
8/20μs
@0.5Vrms,
1MHz
DC AC
RMS
Units
Volts
Volts
Volts
Volts
Volts
Joules
Amps
pF
Symbol
VWDC
VWAC
VB
VC
*1
VC
*2
ET
IP
C
AMCV-0603-5R5-C180 5.5 4.0 10.0-14.0 18 23 0.005 3 18
AMCV-0603-5R5-C300 5.5 4.0 10.0-14.0 18 23 0.005 5 30
AMCV-0603-5R5-C500 5.5 4.0 10.0-14.0 18 23 0.01 10 50
AMCV-0603-5R5-C800 5.5 4.0 10.0-14.0 18 23 0.02 10 80
AMCV-0603-5R5-C101 5.5 4.0 10.0-14.0 18 23 0.05 20 100
AMCV-0603-090-C180 9.0 6.4 11.0-16.0 20 26 0.005 3 18
AMCV-0603-090-C300 9.0 6.4 11.0-16.0 20 26 0.005 5 30
AMCV-0603-090-C500 9.0 6.4 11.0-16.0 20 26 0.01 10 50
AMCV-0603-090-C800 9.0 6.4 11.0-16.0 20 26 0.02 15 80
AMCV-0603-090-C101 9.0 6.4 11.0-16.0 20 26 0.05 20 100
AMCV-0603-140-C180 14.0 10.0 16.0-22.0 30 39 0.005 3 18
AMCV-0603-140-C300 14.0 10.0 16.0-22.0 30 39 0.01 5 30
AMCV-0603-140-C500 14.0 10.0 16.0-22.0 30 39 0.02 10 50
AMCV-0603-140-C800 14.0 10.0 16.0-22.0 30 39 0.03 15 80
AMCV-0603-140-C101 14.0 10.0 16.0-22.0 30 39 0.05 20 100
AMCV-0603-180-C180 18.0 12.7 22.0-28.0 40 48 0.005 5 18
AMCV-0603-180-C300 18.0 12.7 22.0-28.0 40 48 0.02 10 30
AMCV-0603-180-C600 18.0 12.7 22.0-28.0 40 48 0.02 10 60
AMCV-0603-180-C800 18.0 12.7 22.0-28.0 40 48 0.03 15 80
AMCV-0603-180-C101 18.0 12.7 22.0-28.0 40 48 0.05 20 100
AMCV-0603-260-C180 26.0 18.4 31.0-38.0 58 70 0.02 5 18
AMCV-0603-260-C300 26.0 18.4 31.0-38.0 58 70 0.03 10 30
AMCV-0603-260-C500 26.0 18.4 31.0-38.0 58 70 0.03 10 50
*
1: Vc, Maximum peak voltage across the varistor measured at a specified pulse current and waveform.
Energy Rating Pulse & Waveform
0.00- 0.05 Joule 1A, 8/20μs
0.10 Joule 2A, 8/20μs
0.20-0.50 Joule 5A, 8/20μs
*
2: Vc, Maximum peak voltage across the varistor measured at 30ns after initiation of pulse on IEC61000-4-2 30A/8KV.
Storage Temperature and Humidity -10˚C ~ +40˚C and RH 70% (Max.)
SMD Multilayer Chip Varistor
AMCV-0603
1.6 x 0.8 x 0.8 mm.
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 11.30.12
Visit
www.abracon.com
for Terms & Conditions of Sale
ISO 9001:2008
OPTIONS AND PART IDENTIFICATION:
Recommended Land Pattern
Dimension: mm
OUTLINE DIMENSION:
Items Test Methods and Remarks
Varistor Voltage at 1mA DC (VB) Measuring current: 1mA DC
Duration: 0.2 to 2 sec
Capacitance (C) Measure source: 0.5 VRMS
Test frequency: 1MHz.
Leakage Current (IL) Measuring voltage: Maximum DC working voltage
Clamping Voltage (VC) Measuring source: 8/20us waveform, ESD waveform
Test Conditions
Unless otherwise specified, the standard atmospheric conditions for measurement/test as:
a. Ambient Temperature: 20±15˚C
b. Relative Humidity: 65±20%
c. Air Pressure: 86 kPa to 106 kPa
AMCV-0603- - C -
Voltage Code
Please refer to the
table above
Tolerance
N=±30%
Y=+100%, -50%
Y=+0%, -60%
Packaging
T: Tape and Reel
(4kpcs / reel)
Capacitance
Code
Please refer to
the table above
L
W
T
a
1.6±0.15
[0.063±0.006]
0.8±0.15
[0.031±0.006]
0.8±0.15
[0.031±0.006]
0.3±0.2
[0.012±0.008]
A
B
C
0.60〜0.80 0.60〜0.80 0.60〜0.80
SMD Multilayer Chip Varistor
AMCV-0603
1.6 x 0.8 x 0.8 mm.
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 11.30.12
Visit
www.abracon.com
for Terms & Conditions of Sale
ISO 9001:2008
REFLOW PROFILE:
Materials
Top View
Side View
Preheat Condition
150 to 200 ˚C; 60 to 120 sec.
Allowed time above 217 ˚C
60 to 90 sec.
Max temperature
260 ˚C
Max time at max temperature
10 sec.
Solder paste
Sn/3.0Ag/0.5Cu
Allowed Reflow time
2x max.
Part Name
Material
1
Base Material
ZnO
2
Internal Conductor
Ag-Pd
3 Terminal Electrode
Ag (Inner layer)
Ni-Sn (Outer layer)
9.0±1.5mm
SMD Multilayer Chip Varistor
AMCV-0603
1.6 x 0.8 x 0.8 mm.
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 11.30.12
Visit
www.abracon.com
for Terms & Conditions of Sale
ISO 9001:2008
TAPE & REEL:
Storage Conditions
Dimension: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
Packing
T: 4,000pcs / reel
A
B
P
T (max)
1.0±0.2 1.8±0.2 4.0±0.1 1.1
a. The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to high humidity
Package must be stored at 40oC or less and 70% RH or less.
b. The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to dust of
harmful gas (e.g. HCI, sulfurous gas of H2S).
c. Packaging material may be deformed if package are stored where they are exposed to heat of direct sunlight.
d. Solderability shall be guaranteed for 6 months from the date of delivery on condition that they are stored at the environment
specified in a.. The parts that are stored more than 6 months shall be checked solderability before use.
