Noise Suppression Products/EMI Suppression Filters > EMIFILr (RC Combined) > Array Data Sheet 1 EMIFILr (RC Combined) Array NFA31G Series (1206 Size) c Dimensions c Equivalent Circuit (7) (Top View) (8) (9) (10) (1) (2) Input (Output) (7) (3) (4) (5) 0.40.15 (8) (9) (10) (6) 0.80.1 1.10.5 (2)GND 0.80.2 (1)GND 3.20.2 (3) (4) (Bottom View) (6) Output (Input) No polarity. : Electrode 0.05 min. 0.05 min. (in mm) c Insertion Loss Characteristics (Main Items) c Insertion Loss Characteristics (Main Items) (50 - 50) 0 10 (5) 1.60.2 (50 - 50) 0 10 NFA31GD1006R84 Insertion Loss (dB) Insertion Loss (dB) NFA31GD1004704 NFA31GD4706R84 20 NFA31GD1016R84 30 40 NFA31GD4704704 20 NFA31GD1014704 30 40 50 50 1 10 100 Frequency (MHz) 1000 2000 c Insertion Loss Characteristics (Main Items) 1 1000 2000 (50 - 50) 0 10 10 NFA31GD1001014 NFA31GD4703304 Insertion Loss (dB) Insertion Loss (dB) 100 Frequency (MHz) c Insertion Loss Characteristics (Main Items) (50 - 50) 0 10 NFA31GD4701014 20 NFA31GD1011014 30 40 20 30 40 50 50 1 10 100 Frequency (MHz) 1000 2000 1 10 100 Frequency (MHz) 1000 2000 Continued on the following page. oThis data sheet is applied for RC Combined CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (RC Combined) > Array Data Sheet 2 Continued from the preceding page. c Packaging Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 100 c Rated Value (p: packaging code) Part Number Capacitance Resistance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFA31GD1006R84p 10pF 20% 6.8ohm 40% 50mA 6Vdc 1000M ohm -40 to +85C NFA31GD1004704p 10pF 20% 47ohm 30% 20mA 6Vdc 1000M ohm -40 to +85C NFA31GD1001014p 10pF 20% 100ohm 30% 15mA 6Vdc 1000M ohm -40 to +85C NFA31GD1016R84p 100pF 20% 6.8ohm 40% 50mA 6Vdc 1000M ohm -40 to +85C NFA31GD1014704p 100pF 20% 47ohm 30% 20mA 6Vdc 1000M ohm -40 to +85C NFA31GD1011014p 100pF 20% 100ohm 30% 15mA 6Vdc 1000M ohm -40 to +85C Number of Circuit: 4 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for RC Combined CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/