1SS403,H3F(B - TOSHIBA - Product.Network

1SS403

TO SHIBA Diode Silic on Ep itaxia l Planar Type

1SS403

High Voltage Switching Applications

 AEC-Q101 Qualified (Note1)

 Two-pin small packages are suitable for higher mounting densities.

 Excellent in forward current and forward voltage

characteristics : VF (2) = 0.90V (typ.)

 Fast reverse recovery time : trr = 60ns (max)

 Small total capacitance : CT = 1.5pF (typ.)

Note1: For detail information, please contact to our sales.

Absolute Maximum Ratings (Ta = 25°C)

Characteristic Symbol Rating Unit

Maximum (peak) reverse voltage VRM 250 V

Reverse voltage VR 200 V

Maximum (peak) forward current IFM 300 mA

Average forward current IO 100 mA

Surge current (10ms) IFSM 2 A

Power dissipation P 200 * mW

Junction temperature Tj 125 °C

Storage temperature range Tstg −55 to 125 °C

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operat ing temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e . reliabil ity test

report and estimated failure rate, etc).

*: When mounted on a glass epoxy board PCB: 20 mm × 20 mm ,

with copper pad 4 mm × 4 mm.

Electrical Characteristics (Ta = 25°C)

Characteristic Symbol Test

Circuit

Test Condition Min Typ. Max Unit

Forward voltage VF (1) ― IF = 10mA ― 0.72 1.0 V

VF (2)

― IF = 100mA ― 0.90 1.2

Reverse current IR (1) ― VR = 50V ― ― 0.1 μA

IR (2) ― VR = 200V ― ― 1.0

Total capacitance CT ― VR = 0, f = 1MHz ― 1.5 3.0 pF

Reverse recovery tim e trr ― IF = 10mA (Fig. 1 ) ― 10 60 ns

JEDEC ―

JEITA

―

TOSHIBA

1-1E1A

Weight: 0.0045g (typ.)

Unit: mm

Start of commercial production

1998-10

2015-01-09

1SS403

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the in for mation

in this document, and related hardware, software and systems (collect i vely "Product") without notice.

• This document and any information herein may not be reproduced without pri or written permission from TOSHIBA. Even with

TOSHIBA's written permission, reproduct i on is permiss i bl e only if reproduction is without alteration/omission.

• Though TOS HIBA work s c ontinually t o improve Product 's qual it y and reliability, Product can malfuncti on or fail. Cust omers are

responsibl e for compl ying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimi ze risk and avoid situations in which a malfunction or fail ure of Product could cause loss of hum an life, bodily

injury or damage to property, including data loss or corruption. Before custom ers use the Product, create designs including the

Product, or incorporat e the Product into thei r own applicati ons, c ustomers m ust also refer t o and comply with (a) the latest versions of

all relevant TOSHIBA i nformation, i ncluding without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set fort h i n the "TOSHIBA Semiconductor Reliability Handbook " and (b) the

instruct i ons for the applicati on with which the Product will be used with or for. Customers are solely responsi bl e for all aspects o f their

own product design or applications, includi ng but not limit ed to (a) determini ng the appropri at eness of t he use of t his Product i n such

design or applications; (b) evaluat ing and determ i ni ng the applic ability of any information contained i n this docum ent, or in charts,

diagrams, programs, al gorithms , sample application circuits, or any other referenced documents; and (c) val i dat i ng al l operati ng

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILI TY FOR CUSTOMERS' PRODUCT DESIGN OR

APPLICATIONS.

• PRODUCT IS NEI THE R INTENDE D NO R WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS TH AT REQUIRE

EXTRAORDINARI LY HIGH LEVELS OF QUALITY AND/OR REL IABILITY, AND/OR A MALFUNCTI O N OR FAILURE O F WHICH

MAY CAUSE LOSS OF HUMAN LIFE, BODILY I NJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDED USE"). E xcept for s peci fic applic at i ons as expressl y stated in this document, Unintended Use i ncludes, without

limitation, equipment used in nuclear fac ilities, equi pm ent used in the aerospace industry, medical equipment, equipment used for

automobiles, trai ns, ships and other transportation, traffic signaling equipment, equipment us ed to control combustions or explosions ,

safety devices, elevators and escal ators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE

PRODUCT FOR UNINTE NDE D USE, TOSHI BA ASSUMES NO LI ABILITY FOR PRODUCT. For details, please contact your

TOSHIBA sales representative.

• Do not disassemble, anal yze, reverse-engineer, al ter, modif y, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated int o any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulati ons.

• The information contained herein is presented only as guidance for Product use. No responsi bility i s assumed by TOSHIBA f or any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whet her expres s or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERM S AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTE NT ALL OWABLE BY LAW, TOSHI BA (1) ASSUMES NO LIABILITY

WH ATSOEVER, INCLUDING WI THOUT LIMITATION, INDIRECT, CONSEQUENTIAL, S PE CIAL, O R INCI DENTAL DAMAGES OR

LOSS, INCL UDING W ITHOUT LIMITATION, LOSS OF PROFITS, LOS S OF OPP ORTUNI TI E S, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATIO N, INCLUDING WARRANTIES O R CO NDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURP O SE, ACCURACY OF INFORM ATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, includi ng without

limitation, for the design, development, use, s tockpiling or manufacturing of nuclear, chemical, or biol ogic al weapons or missile

technology products (mass destruct i on weapons). Product and related software and technology may be controlled under the

applicable export laws and regulat ions i ncludi ng, without l imitation, t he Japanese Foreign Exchange and Foreign Trade Law and the

U.S. Export Administrat i on Regulati ons. Export and re-export of Product or relat ed software or technology are strictly prohibi ted

except in compliance with all applicable export laws and regulat i ons.

• Please contact your TOS HIBA s ales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicabl e l aws and regulations t hat regulate the inclusion or us e of control l ed substances,

including without limi tation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILIT Y FOR DAMAGES OR LOSSES

OCCURRING AS A RESULT OF NONCOMPLIANCE WIT H APPLICAB L E LAWS AND REGULATIONS.

2015-01-09