GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
7
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Termination of coaxial cables in automotive, medical and instrumentation applications
utilizes a single motion to crimp the center conductor, shield and outer insulation.
GT5 Series
— Connectors for coaxial shielded cables —
<
Several types and configurations: In-line, board mounted, combinations of
coaxial cable with signal/power, Multi-position and color/ keying variations.
>
Features
USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W)
Cost efficient termination
Highly efficient and reliable single motion "Twin Crimp TM " termination allows high volume production
with semi-automatic equipment.
Space-saving Design
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Color and polarizing variations
Excellent High Frequency Performance
Refer to V.S.W.R. data on the following pages.
Applications
In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems,
RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of
communication equipment, office automation equipment, LAN systems.
*"Twin Crimp" is a registered trade mark of Hirose Electric.
SAE/USCAR-19
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
8
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
BTest Data (Using 1.5D-2V Type cable)
BTermination sequence
3.5
9.5 5
2. Crimp the cable to the terminal.
4. Fully insert the retainer.3. Insert the terminal in the housing until is fully locked.
1. Strip the cable.
High Frequency Characteristics (V.S.W.R.)
Note: Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU.
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1
1.0 2.0 3.0GHZ
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5.8
4.6
4.6
21.7
23.05
5.85.8 5.85.8
23.05
9
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Terminals for coaxial shielded cable
F Connector Terminals
*
*
*
*
*
*
*
GT5-30/0.7-1.5SCF(70)
GT5-2428/1.1-2.2SCF
GT5-2428/1.6-2.5SCF(70)
GT5-30/1.6-2.9SCF(70)
GT5-2428/1.6-2.9SCF(70)
GT5-2022/1.6-2.9SCF(70)
GT5-2022/F2.7-3.5SCF
(70)
GT5-2022/F3.3-3.8SCF
(70)
GT5-30/F3.3-5SCF(70)
GT5-2428/F3.3-5SCF(70)
GT5-2022/F3.3-5SCF(70)
GT5-30/F4-5SCF(70)
GT5-2428/F4-5SCF(70)
GT5-2022/F4-5SCF(70)
755-0065-1-70
755-0123-6-70
755-0078-3-70
755-0022-9-70
755-0002-1-70
755-0071-4-70
755-0077-0-70
755-0054-5-70
755-0016-6-70
755-0012-5-70
755-0034-8-70
755-0020-3-70
755-0024-4-70
755-0036-3-70
#30 or equivalent
#24 to 28 or equivalent
#24 to 28 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
#20 to 22 or equivalent
#20 to 22 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
Part Number CL No.
Inner Insulation Diameter
0.6 to 0.9mm
1.0 to 1.4mm
1.5 to 2.0mm
1.5 to 2.0mm
2.0 to 2.5mm
2.5 to 2.9mm
2.5 to 2.9mm
3.0 to 3.6mm
1.4 to 1.8mm
2.0 to 2.4mm
2.3 to 2.7mm
2.6 to 3.4mm
3.3 to 3.7mm
3.6 to 4.0mm
4.6 to 5.0mm
4.6 to 5.0mm
1,300 pcs. per reel
1,300 pcs. per reel
1,300 pcs. per reel
1,300 pcs. per reel
1,100 pcs. per reel
1,100 pcs. per reel
1,100 pcs. per reel
1,100 pcs. per reel
Outer Diameter
Packaging RoHS
RoHS
YES
YES
Conductor Size (AWG)
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
Part
Insulator
Crimp terminals
Outer terminals
Material
PBT
Phosphor bronze
Brass
Finish
Color: Dark gray
Tin plating
Tin plating
*
*
*
*
*
*
*
GT5-30/0.7-1.5PCF(70)
GT5-30/1.6-2.9PCF(70)
GT5-2428/1.6-2.9PCF
(70)
GT5-2022/1.6-2.9PCF
(70)
GT5-2022/F2.7-3.5PCF
(70)
GT5-2022/F3.3-3.8PCF
(70)
GT5-30/F3.3-5PCF(70)
GT5-2428/F3.3-5PCF
(70)
GT5-2022/F3.3-5PCF
(70)
GT5-30/F4-5PCF(70)
GT5-2428/F4-5PCF(70)
GT5-2022/F4-5PCF(70)
755-0017-9-70
755-0021-6-70
755-0001-9-70
755-0094-0-70
755-0076-8-70
755-0053-2-70
755-0015-3-70
755-0011-2-70
755-0033-5-70
755-0019-4-70
755-0023-1-70
755-0035-0-70
#30 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
#20 to 22 or equivalent
#20 to 22 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
Part Number CL No.
Inner Insulation
Diameter
0.6 to 0.9mm
1.5 to 2.0mm
2.0 to 2.5mm
2.5 to 2.9mm
2.5 to 2.9mm
3.0 to 3.6mm
1.4 to 1.8mm
2.6 to 3.4mm
3.3 to 3.7mm
3.6 to 4.0mm
4.6 to 5.0mm
4.6 to 5.0mm
900 pcs. per reel
900 pcs. per reel
900 pcs. per reel
900 pcs. per reel
900 pcs. per reel
900 pcs. per reel
Outer
Diameter Packaging
Conductor Size (AWG)
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
Part
Insulator
Crimp terminals
Outer terminals
Material
PBT
Brass
Brass
Finish
Color: Dark gray
Tin plating
Tin plating
M Connector Terminals
Low-insertion M Connector Terminals
Part
Insulator
Crimp terminals
Outer terminals
Material
PBT
Brass
Brass
Finish
Color: Dark gray
Tin plating
Tin plating
GT5L-30/0.7-1.5PCF(70)
GT5L-30/1.6-2.9PCF(70)
GT5L-2428/1.6-2.9PCF
(70)
GT5L-2428/1.6-2.5PCF
(70)
755-0068-0-70
755-0067-7-70
755-0066-4-70
755-0079-6-70
#30 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#24 to 28 or equivalent
Part Number HRS No.
Inner Insulation
Diameter
0.6 to 0.9mm
1.5 to 2.0mm
1.4 to 1.8mm
2.6 to 3.4mm
2.6 to 3.4mm
2.3 to 2.7mm
900 pcs. per reel
900 pcs. per reel
Outer
Diameter Packaging
Conductor Size (AWG) RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
10
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
9.6
13
11.1
25
F Connectors
For Single-Conductor coaxial shielded cable
Housings
14.8
7.85
2.8
25
9.6
11.1
13
1.2
GT5R-1S/HU
GT5-1S-HU
Retainer (-Optional-Used with the housings: GT5-1S-HU,
GT5-1PP-HU, GT5N-1PP-HU, GT5H-1PP-HU)
Housing (Not requiring use of the retainer)
Part Number
GT5-1P/S-R
CL No. Material Color
755-0006-2 PBT Dark gray
Part Number
GT5R-1S-HU
CL No. Material Color
755-0047-0 PBT Light gray
(26.35)
Retainer
GT5-1S-HU
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU( I )
GT5-1S-HU(J)
GT5-1S-HU(K)
755-0004-7
755-0037-6
755-0038-9
755-0080-5
755-0081-8
755-0082-0
-
-
-
Light gray
Brown
Green
Blue
Purple
Pink
Black
Cream white
Pastel orange
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
GT5-1PP-HU(70)
GT5-1PP-HU(A)(70)
GT5-1PP-HU(B)(70)
GT5-1PP-HU(C)(70)
GT5-1PP-HU(D)(70)
GT5-1PP-HU(E)(70)
GT5-1PP-HU( I )
GT5-1PP-HU(J)
GT5-1PP-HU(K)
GT5-1P-DS(70)
GT5-1P-DS(A)(70)
GT5-1P-DS(B)(70)
GT5-1P-DS(C)(70)
GT5-1P-DS(D)(70)
GT5-1P-DS(E)(70)
GT5-1P-DS( I )
GT5-1P-DS(J)
GT5-1P-DS(K)
Part Number CL No. Material Color
Key polarizing
code
Corresponding M Connector
Housing- In-line
Corresponding M Connector
Assembly- Board Mounting
-
A
B
C
D
E
I
J
K
USCAR-19
Coding
PBT
B
Shown with inserted retainer.
Figure qFigure wFigure e
Figure rFigure tFigure y
Figure uFigure iFigure o
B
Keying Configurations
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
14.3
11.8
13.4
9.85
0.8
30
25
12.2
9.2
6.8
30
25
17
13.5
9.95
15.9
3
0.6
11
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Part
Housing
Ground terminal
Material
PBT
Phosphor bronze
Finish
____
Tin plating
Housings
(41.4)
(11.4)
20.25
(1.35)
(1.35)
GT5H-1PP-HU
GT5-1P/S-R
GT5-1S-HU
GT5-1P/S-R
(41.4)
30 (11.4)
(1.35)(1.35)
GT5N-1PP-HU
GT5-1P/S-R
GT5-1S-HU
GT5-1P/S-R
Figure qFigure wFigure e
Figure rFigure tFigure y
Figure uFigure iFigure o
M Connectors
GT5-1PP-HU(70)
GT5-1PP-HU(A)(70)
GT5-1PP-HU(B)(70)
GT5-1PP-HU(C)(70)
GT5-1PP-HU(D)(70)
GT5-1PP-HU(E)(70)
GT5-1PP-HU( I )(70)
GT5-1PP-HU(J)(70)
GT5-1PP-HU(K)(70)
755-0005-0-70
755-0039-1-70
755-0040-0-70
755-0103-9-70
755-0104-1-70
755-0105-4-70
-
-
-
Light Gray
Brown
Green
Blue
Purple
Pink
Black
Cream white
Pastel orange
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
-
A
B
C
D
E
I
J
K
Part Number CL No. Corresponding F Connector
Housing Color
Key polarizing
code
USCAR-19
Coding
Note : Refer to pages 27 for panel mounting in-line bracket.
GT5-1S-HU
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU( I )
GT5-1S-HU(J)
GT5-1S-HU(K)
Housings (For use with H type
mounting bracket)
Housing (For use with N type mounting
bracket)
BFully mated connector assemblies.
BFully mated connector assemblies.
Part Number
GT5H-1PP-HU (10)
CL No.
755-0093-7 10
Color Material Corresponding F Connector
Housing
Light Gray PBT GT5-1S-HU
GT5R-1S-HU
B
Keying Configurations
(31.35)
Retainer(GT5-1P/S-R)
B
Shown with inserted retainer.
RoHS
YES
RoHS
YES
Part Number
GT5N-1PP-HU
CL No.
755-0090-9
Color Material Corresponding F Connector
Housing
Light Gray PBT GT5-1S-HU
GT5R-1S-HU
RoHS
YES
Retainer(GT5-1P/S-R)
Retainer(GT5-1P/S-R)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Part Number
GT5A-1PP-HU(70)
CL No.
755-0025-7-70
Part Material
Housing
Ground terminal
PBT
Brass
15
12.4
9.95
11.8
13
4
14
11.15
13.4
30 9.5
7
6.2
15
12.4
9.95
11.8
26
13.4
14
11.15
30 19
7
6.2
11.6
5.8
19
10.4
M3
30
15
GT5-1P/S-R
GT5-1S-HU
M3
Panel 
thickness:1.6
12
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Housings
Panel mounting, enhanced
shielding type
Finish
Color: Light gray
Tin plating
Corresponding F Connector Housing
GT5-1S-HU, GT5R-1S-HU
[]
BRecommended Panel Cut-out
BMounted and fully mated connector
assemblies
Note 1: Retainer is unnecessary.
Note 2: Use JIS B 1111 and 1101 M3 screws for the mounting screws.
Note 1: Retainer is unnecessary.
Note 2: Use JIS B 1111 and 1101 M3 screws for the mounting screws.
RoHS
YES
Part Number
GT5P-1PP-HU(70)
CL No.
755-0030-7-70
Part Material
Housing
Ground terminal
PBT
Brass
Finish
Color: Light gray
Tin plating
Corresponding F Connector Housing
GT5-1S-HU, GT5R-1S-HU
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
7
8.1
Assembly Diagram (1:1)
4
3.2
13.4
11.15
14
3.6
2.6
27.4
12.3
GT5-1S-HU
GT5-1P/S-R
Chassis
30
12.65
11.8
12.8
19
26
12.65
3.2
30
11.8
16.8
19
26
2.6
1.2
1.2
11.15
5
13.4
15.9
7
8.1
5
Assembly Diagram(1:1)
27.4
12.3
1
GT5-1S-HU
GT5-1P/S-R
Chassis
13
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Note 1: Retainer is unnecessary.
Note 2: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws.
Note 1: Retainer is unnecessary.
Note 2: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws.
BMounted and fully mated connector
assemblies
BMounted and fully mated connector
assemblies
Part Number
GT5B-1PP-HU(70)
CL No.
755-0051-7-70
Part Material
Housing
Ground terminal
PBT
Copper alloy
Finish
Color: Light gray
Tin plating
Corresponding F Connector Housing
GT5-1S-HU, GT5R-1S-HU
RoHS
YES
Part Number
GT5S-1PP-HU(70)
CL No.
755-0050-4-70
Part Material
Housing
Ground terminal
PBT
Copper alloy
Finish
Color: Light gray
Tin plating
Corresponding F Connector Housing
GT5-1S-HU, GT5R-1S-HU
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5E-1P-DS(70)
14
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
20.4
15.4
21.3
21.3
GT5-1
GT5-1P/S-R
Note
GT5-1P-DS(70)
T=1.6
15.4
7.7
Panel
Connector assembly, Printed
Circuit Board Mounting Type
GT5-1P-DS(70)
GT5-1P-DS(A)(70)
GT5-1P-DS(B)(70)
GT5-1P-DS(C)(70)
GT5-1P-DS(D)(70)
GT5-1P-DS(E)(70)
GT5-1P-DS(I)(70)
GT5-1P-DS(J)(70)
GT5-1P-DS(K)(70)
755-0007-5-70
755-0041-3-70
755-0042-6-70
755-0083-3-70
755-0084-6-70
755-0085-9-70
-
-
-
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
GT5-1P-DS
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS(I)
GT5-1P-DS(J)
GT5-1P-DS(K)
GT5-1S-HU
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J)
GT5-1S-HU(K)
Part Number CL No. Color
Key polarizing
code
M Connector-Board Type
Corresponding F Connector
Housing
Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board
thickness of 1.6 mm) for the mounting screws.
* Eight types of keys are available.
Please use a mating F connector housing of a matching key type.
Light Gray
Brown
Green
Blue
Purple
Pink
Black
Cream white
Pastel orange
Part
Housing
0.64 x 1.1 Terminals
Insulator
Outer terminals
Material
PBT
Brass
PBT
Phosphor bronze
Finish
-
Tin plating
Dark gray
Tin plating
BRecommended PCB Mounting Pattern
BRecommended PCB Mounting Pattern
BFully Mated connector assemblies
11.8
13.9
3
12.8
13.9
12.8
13.9
Figure qFigure wFigure e
Figure rFigure tFigure y
Figure uFigure iFigure o
12.8
RoHS
YES
GT5E-1P-DS(70) 755-0092-4-70
GT5-1S-HU
GT5R-1S-HU
Part Number CL No. Finish
Corresponding F
Connector Housing
Natural
Tin plating
Dark gray
Tin plating
Tin plating
Material
Part
PA
Brass
PBT
Phosphor bronze
Brass
Housing
0.64 x 1.1 Terminals
Insulator
Outer terminals
Lock pin
YES
RoHS
BFully Mated connector assemblies
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
16.6
25
13.3
11.50.4
1.2
Note 1: Used with separate retainer (GT5-2P/S-R).
Note 2: Please use a mating F connector of a matching key type.
15
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
F Connectors
Two-position type-Each Single-Conductor coaxial shielded cable
Figure qFigure wFigure eFigure r
GT5-2P/S-R
25
41.4
CAV NO
30
25
1.2
21.8
4.75
min.
17.75
5
2.8
1
1.52
0.6
Tin plating
14.5 8
5
1.3
1.5
4.2
7.8
9.8
6.8
1.6
GT5-2P/S-R
GT5-2S-HU
GT5-2P/S-R
Housings
GT5-2S-HU
GT5-2S-HU(A)
GT5-2S-HU(B)
GT5-2S-HU(C)
GT5-2S-HU(D)
755-0044-1
755-0059-9
755-0060-8
755-0097-8
755-0098-0
Figure q
Figure w
Figure e
Figure r
Figure q
D2
A2
B2
C2
Part Number CL No. Color
Key polarizing
code
USCAR-19
Coding
Light Gray
Brown
Green
Blue
Light Gray
Material
PBT
BShown with inserted retainer.
M Connectors
Housings[Panel Mounted Housing]
Figure qFigure wFigure eFigure r
GT5-2PP-HU(70)
GT5-2PP-HU(A)(70)
GT5-2PP-HU(B)(70)
GT5-2PP-HU(C)(70)
GT5-2PP-HU(D)(70)
755-0045-4-70
755-0063-6-70
755-0064-9-70
755-0099-3-70
____
Part Number CL No.
Key polarizing
code
Note1: Used with separate retainer (GT5-2P/S-R).
Coding D2 at USCAR-19 is GT5-2PP-HU.
Note2: Refer to page 27 for panel mounting in-line bracket.
Figure q
Figure w
Figure e
Figure r
Figure q
Color
Light Gray
Brown
Green
Blue
Light Gray
BRecommended Mounting Bracket dimensions.
BFully mated connector assemblies
Part
Housing
Ground terminal
Material
PBT
Phosphor bronze
Finish
-
Tin plating
BKeying Configurations
BKeying Configurations
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
CAV NO
14.8
10.92.8
30
25
18.8
13.4
15.8
22.4
14.15
4
18.8
27.4
7.77 21.3
5.45
16
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
41.4
GT5-2S-HU
GT5-2P/S-R
GT5-2P/S-R
3
3
3
3
Figure qFigure wFigure eFigure r
GT5-2P-DS (70)
Recommended Panel Cut-out
GT5-2P-DS (A)(70) GT5-2P-DS (B)(70) GT5-2P-DS (C)(70)
Housing
Retainer – 2 position (Used with GT5-2S-HU, GT5-2PP-HU,
and GT5N-2PP-HU)
Housing
GT5N-2PP-HU 755-0055-8
Part Number CL No. Color
Note :Used with separate retainer (GT5-2P/S-R).
Light gray
Material
PBT
BFully Mated connector assemblies
GT5-2P/S-R 755-0046-7
Part Number CL No. Color
Dark gray
Material
PBT
GT5-2P-DS(70)
GT5-2P-DS(A)(70)
GT5-2P-DS(B)(70)
GT5-2P-DS(C)(70)
GT5-2P-DS(D)(70)
755-0043-9-70
755-0061-0-70
755-0062-3-70
755-0101-3-70
755-0102-6-70
Figure q
Figure w
Figure e
Figure r
Figure q
D2
A2
B2
C2
Part Number CL No. Color
Key polarizing
code
USCAR-19
Coding
Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws
(for a board thickness of 1.6 mm) for the mounting screws.
Coding D2 at USCAR-19 is GT5-2P-DS.
Light Gray
Brown
Green
Blue
Light Gray
Material
PBT
BRecommended Board Mounting
Pattern
BMounted and fully mated
connector assemblies
BKeying Configurations
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
17
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Power Supply Terminals
F Connector Terminals
M Connector Terminals
2.3 2.8
19
2.8
1.9
2.7
20.7
GT7-2022SCF(70)
GT7A-2022SCF(70)
757-0001-1-70
757-0003-7-70
#20 to 22
#20 to 22
Part Number CL No.
5,000pcs.per reel
3,000pcs.per reel
Material Finish Conductor Size (AWG) Outer
Diameter Packaging
Note 1: Sold by the reel. (See above table for number of Packaging.)
Note 2: This component is used only with applicable HRS housings.
Copper alloy Tin plating 1.4 to 2.4mm
2.6 to 3.1mm
Note 1: Sold by the reel. (See above table for number of Packaging.)
Note 2: This component is used only with applicable HRS housings.
RoHS
YES
GT7-2022PCF(70)
GT7A-2022PCF(70)
757-0002-4-70
757-0004-0-70
#20 to 22
#20 to 22
Part Number CL No.
5,000pcs.per reel
3,000pcs.per reel
Material Finish Conductor Size (AWG) Outer
Diameter Packaging
Brass Tin plating 1.4 to 2.4mm
2.6 to 3.1mm
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
21.1
25
12.5
10.8
Retainer
18
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Combinaton Type (Two Single-Conductor Coaxial shielded Cables + One Power contact)
F Connectors
17.28
16.62.8
Housing
Note : Used with separate retainer (GT5-2/1S-R).
BShown with inserted retainer.
Retainer (exclusively for GT5-2/1S-HU)
GT5-2/1S-R 755-0003-4
Part Number CL No. Color
Dark gray
Material
PBT
M Connectors
Connector assembly, Printed
Circuit Board mounting
31.9
26.9
21.3 23.3
13.4
GT5-2/1P-DS(70) 755-0014-0-70
Part Number CL No.
Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board
thickness of 1.6 mm) for the mounting screws.
Housing
0. 64x1.1 Terminal
Insulator
Outer terminal
Tub terminal for DS 070
PBT
Brass
PBT
Phosphor bronze
Brass
Color: Light gray
Tin plating
Dark gray
Tin plating
Tin plating
Part Material Finish
For inner conductor
Thickness :
1.6mm
For outside conductor
For power supply
B
Recommended Board Mounting Pattern
26.9
23.7
4-R3.25
Board
13.3
0.3
B
Recommended Panel Cut-out
GT5-2/1S-HU 755-0009-0
Part Number CL No. Color
Light gray
Material
PBT
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
15.36
16.63.5
15.8
30
25
13.4
23.3
19
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
M Connectors
GT5-2/ 1PP-R
30 26.3
13.4
Mounting bracket 
attachment side
Outside ground connection
Retainer
1.52
0.6
1
1.6
6.8
4.2
7.8
17.75
1.5
4.75min.
5
5
8
2.8
14.5
9.8
Tin plating finish
Housing - with External Ground
BShown with inserted retainer.
Part Number
GT5N-2/1PP-HU
CL No.
755-0013-8
Material Color
PBT Light gray
Note : Used with separate retainer GT5-2/1PP-R.
Retainer (Used with GT5N-2/1PP-HU and GT5-2/1PP-HU)
Part Number
GT5-2/1PP-R
CL No.
755-0010-0
Material Color
PBT Dark gray
B
Recommended Mounting Bracket Dimensions
Housing - without External Ground
Part Number
GT5-2/1PP-HU(70)
CL No.
755-0008-8-70
Part Material Finish
Housing
Ground terminal
PBT
Phosphor bronze
Color: Light gray
Tin plating
Note 1: Used with separate retainer (GT5-2/1PP-R ).
Note 2: Refer to page 27 for panel mounting in-line bracket.
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
14.8
27.6
2.8
35.8
31.9
9.2
3
1.2
30
21.5
14.6
13.8
16.2
31.9
8.5
33.6
31.9
12.5
11.5
25
20
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
F Connector
GT5-4P/S-R
Part Number
GT5-4S-HU
CL No.
755-0056-0
Material Color
USCAR-19
Coding
PBT Light gray D4
Note: Used with separate retainer (GT5-4P/S-R).
M Connector
Part Number
GT5N-4PP-HU
CL No.
755-0057-3
Material Color
USCAR-19
Coding
PBT Light gray D4
Note 1: The product should be used with a low-force insertion/withdrawal
M connector terminal.
Note 2: Used with separate retainer GT5-4P/S-R.
Retainer (Used with GT5-4S-HU and GT5N-4PP-HU)
Part Number
GT5-4P/S-R
CL No.
755-0058-6
Material Color
PBT Dark gray
4-Position – Single conductor shielded Coaxial cable BShown with inserted retainer.
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
12.6 Lot No.
35.8
40.8
45.8
24
10
5.25
CAV NOPIN No
10.6
34
0.5
3
14.3
15.1
21.3
21
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
M Connector
Panel Outline
For outer conductors
For center conductors
36.2
14.2
0.3
PCB
2-R3
2-R0.5
21.3
Panel
M3 Screw
Board
BRecommended Board Mounting Pattern
BRecommended Panel Cut-out
BMounted and fully mated connector assemblies
GT5-4P-DS(70) 755-0087-4-70 D4
Part Number CL No.
USCAR-19
Coding
Connector assembly, Printed Circuit Board Mounting
Housing
0.64✕1.1Terminal
Insulator
Outer terminal
PBT
Brass
PBT
Phosphor bronze
Light gray
Tin plating
Dark gray
Tin plating
Item Material Color / Finish
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
15.4
15.9
8.7
16.618.65
36
22
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
For Single Conductor Coaxial shielded Cable - Waterproof Type
F Connector
Housing
Part Number
GT5W-1S-HU
CL No.
755-0027-2
MaterialColor
PBT Light gray
Note: Specific retainer is determined by the type of the cable used.
Note: Outer diameter of the cable must be within 2.9 to 3.4 mm. Consult nearest HRS
representative for other diameters.
Retainer (Used with GT5W-1PP-HU, GT5JW-1PP-HU,
GT5W-1S-HU and GT5W-1P-HU)
Part Number
GT5W-1P/S-R
CL No.
755-0028-5
MaterialColor
PBT
Silicon rubber Compound
Dark gray
Dark blue
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
34
18.4
18.2
23
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
M Connectors
Housing
Part Number
GT5W-1P-HU
CL No.
755-0026-0
Part Material Color
Housing
Connector seal
PBT
Silicon rubber Compound
Light gray
White
Note: Use correct retainer.
Please check elsewhere for information about the bracket for
GT5JW-1PP-HU.
BMounted and fully mated connector assemblies
BRecommended Bracket Dimensions Diagram(for GT5W-1PP-HU)
Housings - Bracket Mounting
GT5W-1PP-HU
GT5JW-1PP-HU
755-0070-1
755-0069-2
Part Number CL No. Part
Housing
Connector seal
Material
PBT
Silicon rubber Compound
Color
Light gray
White
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
24
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
G Terminals
For Direct Coaxial Shielded
Cable Termination
14.6
10.8
2.5
6.3
9.3
0.4
28
1
3
6.9
19
1.5D-2V or equivalent
3.5
27
R1
1.9
Part Number
GTB-1.6CF(70)
CL No.
755-0049-5-70
Material Finish Packaging
Brass Tin plating 1,500 pcs. Per reel
3.5 1.5D-2V or equivalent
3.5 Heat-shrink 
tubing
Pre-
solder
3.5
Part Number
G-1.6PCF(70)
CL No.
755-0029-8-70
Material Finish Packaging
Brass Tin plating 1,500 pcs. Per reel
6.3
6.9
3
2
0.4
10.6
7
1.9
R1
1.5D-2V or equivalent
Heat-shrink tubing
72 3.5
1.2
2.3
2.9
Lands
BBoard Termination Pattern
BRecommended Completed Termination cross section
B
Board Termination Pattern
BCompleted Termination cross section
B
Board Termination Pattern
BCompleted Termination cross section
0.6
1.2
2.3
2.8
Lands
Part Number
GTA-1.6CF (70)
CL No.
755-0032-2 -70
Material Finish Packaging
Brass Tin plating 1,500 pcs. Per reel
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.9
0.6
1.2
Lands
R0.3
25
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
For Direct Coaxial Cable Termination
10.5
15
0.5 2
0.8
2.5
9
3
5.25
3.3
1
0.25
6.15
0.25
0.25
1.9
Pre-solder
2.8 3.5
R1
BRecommended Board
Termination Pattern
BCompleted Termination Cross Section
13.6
9.8
8.55
0.5 1.5
2.5
4.75
2.4
2.6
0.25
0.8
2.8
0.25
0.15
1.9
2.4
1.8
1.1
Lands
0.5
1.9
Pre-solder
7.4 0.7 3.5
R1
0.7D
equivalent
BRecommended Board
Termination Pattern
BRecommended Board
Termination Pattern
BRecommended Completed Termination cross
section
BRecommended Completed Termination cross
section
Part Number
GTA-0.7CF
CL No.
755-0074-2
Material Finish Packaging
Brass Tin plating 1,500 pcs. Per reel
Part Number
GTB-0.7CF
CL No.
755-0075-5
Material Finish Packaging
Brass Tin plating 1,500 pcs. Per reel
Lands
RoHS
YES
RoHS
YES
Part Number
GTE-3.7CF
CL No.
755-0122-3
Material Finish Packaging
Brass Tin plating 1,100 pcs. Per reel YES
RoHS
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
26
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Bottom Shield cover
5.4
5.6
5
2.63
3.3
6.45
5.6 T=0.25
R1.6
Part Number
GT5-1P/S-CSB(70)
CL No.
755-0048-2-70
Material Finish
Brass Tin plating
Mounted Condition Installed
Mounted Condition Installed
Top Shield cover
For Improved Electronic Noise Compatibility
RoHS
YES
Part Number
GT5C-1P-CSB( 70)
CL No.
755-0088-7-70
Material Finish
Brass Tin plating
RoHS
YES
2.5
5
8
3
R1
3.5
0.2
Raised point of 
contact
8.2
A
A
B B
6
6.5
2.5
0.6
T-0.4
5
(0.25)
7.5
634
(0.52)
C
C
4.6
Setscrew (M2.5)
Panel
For use with 
coaxial cables 
2.9 to 3.4 mm. 
outside diameter.
For Mid-Cable Termination
Part Number
GT-1.6PG-C(70)
CL No.
755-0031-0-70
Material Finish Packaging
Brass Tin plating 1
BRecommended Panel Cut-out
BAttachment Diagram
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
9.8
4.5
24.5
7.5
T=1
1.1
12
8
27
GT5 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Automatic crimping machine
* Crimp height setting tables are available for each cable type. Please contact your
nearest Hirose Electric account representative.
Different cables will require different crimp height settings.
BTermination Tools
User's manuals are available. Please ask your Hirose Electric account representative.
Panel Mounting In-line Bracket
Item
Specification
Stroke length
Number of strokes
Weight
Motor
Crimping speed
Specification
1.5tons
30mm
200spm(50Hz)
75kg
0.2kW
2000 to 4000pcs. Per hour
Remarks
200spm(60Hz)
AC100V
Specifications
Part Number CM-105
Part Number
GT-BK(70)
CL No.
751-0039-6-70
Material Finish Used with connectors
SPCC Tin plating
GT5-1PP-HU(70), GT5-1PP-HU(B)(70)
GT5-1PP-HU(A)(70), GT5-1PP-HU(D)(70)
GT5-1PP-HU(C)(70), GT5-1PP-HU(I)(70)
GT5-1PP-HU(E)(70), GT5-1PP-HU(K)(70)
GT5-1PP-HU(J)(70), GT5-2PP-HU(70)
GT5-2/1PP-HU(70), GT5-2PP-HU(B)(70)
GT5-2PP-HU(A)(70), GT5-2PP-HU(D)(70)
GT5-2PP-HU(C)(70)
YES
RoHS
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
28
GT5 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT5-30/0.7-1.5PCF(70)
GT5-30/0.7-1.5SCF(70)
GT5-2428/1.1-2.2SCF
GT5-2428/1.6-2.5PCF(70)
GT5-2428/1.6-2.5SCF(70)
GT5-30/1.6-2.9PCF(70)
GT5-30/1.6-2.9SCF(70)
GT5-2428/1.6-2.9PCF(70)
GT5-2428/1.6-2.9SCF(70)
GT5-2022/1.6-2.9SCF(70)
GT5-2022/F2.7-3.5PCF(70)
GT5-2022/F2.7-3.5SCF(70)
GT5-2022/F3.3-3.8PCF(70)
GT5-2022/F3.3-3.8SCF(70)
GT5-2428/F3.3-5PCF(70)
GT5-2428/F3.3-5SCF(70)
GT5-2022/F3.3-5PCF(70)
GT5-2022/F3.3-5SCF(70)
GT5-30/F4-5PCF(70)
GT5-30/F4-5SCF(70)
GT5-2428/F4-5PCF(70)
GT5-2428/F4-5SCF(70)
GT5-2022/F4-5PCF(70)
GT5-2022/F4-5SCF(70)
G-1.6PCF(70)
GTA-0.7CF
GTB-0.7CF
GTA-1.6CF(70)
GTB-1.6CF(70)
Name of Applicabe Terminal Name of Applicabe Applicator CL No.
AP105-GT5-30/0.7-1.5P
AP105-GT5-30/0.7-1.5S
AP105-GT5-2428/1.1-2.2S-ID
AP105-GT5-2428/1.6-2.5P
AP105-GT5-2428/1.6-2.5S
AP105-GT5-30/1.6-2.9P-ID
AP105-GT5-30/1.6-2.9P
AP105-GT5-30/1.6-2.9P-A
AP105-GT5-30/1.6-2.9S-ID
AP105-GT5-30/1.6-2.9S
AP105-GT5-2428/1.6-2.9P
AP105-GT5-2428/1.6-2.9PWS
AP105-GT5-2428/1.6-2.9P-B
AP105-GT5-2428/1.6-2.9S
AP105-GT5-2428/1.6-2.9SWS
AP105-GT5-2428/1.6-2.9S-B
AP105-GT5-2022/1.6-2.9S
AP105-GT5-2022/F2.7-3.5P
AP105-GT5-2022/F2.7-3.5S
AP105-GT5-2022/F3.3-3.8P
AP105-GT5-2022/F3.3-3.8S
AP105-GT5-2428/F3.3-5P-ID
AP105-GT5-2428/F3.3-5S-ID
AP105-GT5-2022/F3.3-5P-ID
AP105-GT5-2022/F3.3-5P
AP105-GT5-2022/F3.3-5P2.2D-ID
AP105-GT5-2022/F3.3-5S-ID
AP105-GT5-2022/F3.3-5S
AP105-GT5-2022/F3.3-5S2.2D-ID
AP105-GT5-30/F4-5P-ID
AP105-GT5-30/F4-5S-ID
AP105-GT5-2428/F4-5P-ID
AP105-GT5-2428/F4-5P-3C2V
AP105-GT5-2428/F4-5S-ID
AP105-GT5-2428/F4-5S-3C2V
AP105-GT5-2022/F4-5P-ID
AP105-GT5-2022/F4-5P
AP105-GT5-2022/F4-5P-18ID
AP105-GT5-2022/F4-5P-RG58
AP105-GT5-2022/F4-5S-ID
AP105-GT5-2022/F4-5S
AP105-GT5-2022/F4-5S-18ID
AP105-GT5-2022/F4-5S-RG58
AP105-G-1.6P
AP105-GTA .B-0.7P
AP105-GTA .B-0.7P
AP105-GTA .B-1.6P
AP105-GTA .B-1.6P
CL901-5021-8
CL901-5080-7
CL901-5171-0
CL901-5100-2
CL901-5101-5
CL901-5019-6
CL901-5017-0
CL901-5040-2
CL901-5020-5
CL901-5018-3
CL901-5029-0
CL901-5031-1
CL901-5103-0
CL901-5030-9
CL901-5032-4
CL901-5104-3
CL901-5088-9
CL901-5091-3
CL901-5092-6
CL901-5075-7
CL901-5076-0
CL901-5037-8
CL901-5038-0
CL901-5058-8
CL901-5059-0
CL901-5070-3
CL901-5060-0
CL901-5061-2
CL901-5071-6
CL901-5033-7
CL901-5034-0
CL901-5035-2
CL901-5056-2
CL901-5036-5
CL901-5057-5
CL901-5054-7
CL901-5052-1
CL901-5121-2
CL901-5105-6
CL901-5055-0
CL901-5053-4
CL901-5102-8
CL901-5106-9
CL901-5041-5
CL901-5047-1
CL901-5047-1
●Harnes Tool
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.