MTA, CST-100 II, SL-156 and
AMP Economy Power
(EP) Connectors
2
© 1977, 1978, 1979, 1980, 1983, 1986,
1988, 1992, 1993, 1994, 1995, 1999,
2000, 2001, 2002, 2003 and 2005 by
Tyco Electronics Corporation.
All International Rights Reserved.
AMP, AMP-O-LECTRIC, AMP-O-MATIC,
AMPOMATOR, CERTI-CRIMP,
PRO-CRIMPER, MADISON CABLE and
TYCO are trademarks.
TEFLON is a trademark of E.I. DuPont
De Nemours and Company.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
Introduction and Table of Contents .................................................2,3
Connector Selection Guide ........................................................3
.050 [1.27] Centerline Connectors
MTA-50 IDC Connectors and Headers ............................................4-10
Introduction and Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
IDC Connector Kits (Feed-Thru and Closed End)
RibbonCable .......................................................5,6
DiscreteWire........................................................7,8
Through-Hole Header Assemblies
VerticalandRight-Angle .................................................9
Surface Mount Header Assemblies
VerticalandRight-Angle ................................................10
.100 [2.54] Centerline Connectors
MTA-100 IDC Connectors and Headers ..........................................11-31
Introduction ............................................................11
Wire-to-BoardMateabilityGuide .........................................12,13
Connectors — UL94V-2 and UL94V-0
Closed End with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15
Feed-Thru with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
LED Closed End and Feed-Thru — UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15
Accessories .........................................................16,17
Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 19
MTA-100 Posted Connectors (Wire-to-Wire) UL94V-2
ClosedEnd ..........................................................20
Feed-Thru ...........................................................20
Headers — UL94V-0
Flat—StraightandRight-AnglePosts .....................................21
Narrow Flat — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Polarized — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Friction Lock — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Headers with Retention Peg — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
High Profile Headers — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Polarized — High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . . . . .27
Friction Lock — High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . .28
Polarized—SurfaceMount,Straight ......................................29
Friction Lock — Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Shrouded — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
CST-100 II Crimp Contacts, Housings and Shrouded Headers .........................31,32
.156 [3.96] Centerline Connectors
MTA-156 IDC Connectors and Headers ..........................................33-57
Introduction ............................................................33
Wire-to-BoardMateabilityGuide .........................................34,35
Connectors — UL94V-2 and UL94V-0
Closed End with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .36, 37
Closed End without Locking Ramp, with and without Polarizing Tabs . . . . . . . . .36, 37
Feed-Thru with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . . . .38, 39
Feed-Thru without Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .38, 39
Accessories .........................................................40-42
Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44
MTA-156 Posted Connectors (Wire-to-Wire) — UL94V-2
ClosedEnd ..........................................................45
Feed-Thru ...........................................................45
MTA-156 Headers — UL94V-0
Flat—StraightPosts ...................................................46
Flat—Right-AnglePosts................................................47
FrictionLock—StraightPosts ...........................................48
FrictionLock—Right-AnglePosts ........................................49
Polarized Lock—StraightPosts..........................................50
Polarized Lock—Right-AnglePosts ......................................51
Friction Lock — High Temperature, Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Shrouded — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
MTA-156 Quad Connectors — UL94V-0 .........................................54,55
ClosedEndwithLockingRamp ............................................55
Feed-ThruwithLockingRamp .............................................55
Introduction
This catalog has been designed
to assist you, our customer, iden-
tify products to satisfy your con-
nector needs for printed circuit
board headers, mass termination
connectors preloaded with con-
tacts, crimp-snap contacts and
housings, and card edge con-
nectors with preloaded contacts.
The list at right identifies by
centerline the types of product
available and is meant to be of
assistance to you in the product
selection process.
IDC
MTA-50
IDC
MTA-100
Crimp
CST-100 II
IDC
MTA-156
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Table of Contents
3
MTA-156 Card Edge .......................................................56,57
Connectors — UL94V-0
Closed End with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Feed-Thru with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Accessories ............................................................57
SL-156 Crimp Connectors and Headers .........................................58-62
Wire-to-BoardMateabilityGuide ............................................58
Wire-to-Board Crimp Contacts and Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Wire-to-BoardHousings—UL94V-0 .........................................60
Housings with Through Board Latch — UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Housings and Contacts for Large Insulation Diameter (LID) Wire . . . . . . . . . . . . . . . . . .62
AMP Economy Power (EP) Connector System .......................................63-69
.156 [3.96] Centerline Connectors
Introduction ............................................................63
CrimpContacts .........................................................64
PlugHousings,Low-Profile ................................................64
Low-Profile Headers — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . .65
Low-Profile Headers, High Temp. — Straight and Right-Angle Posts . . . . . . . . . . . . . . .66
.200 [5.08] Centerline Connectors
Plug Housings and Straight and Right-Angle Post Headers . . . . . . . . . . . . . . . . . . . . . .67
.312 [7.92] Centerline Connectors
Low-ProfileHeaders—StraightPosts .......................................68
Single Connectors
1-Position Plug Housing and High-Profile Header — Straight Post . . . . . . . . . . . . . . . . .69
MTA Wire Selection and Ribbon Cable Preparation ......................................70
IDC Ribbon Cable ...........................................................71-74
MTA Wire Termination Flowchart ...................................................75
MTA Application Tooling .......................................................76-79
Part Number Index ...........................................................80-82
Global Contacts ...............................................................83
Center- Contact Wire-to- No. of Wire Wire Current Voltage Operating UL Replace-
Product Name line Termin- Wire Positions Size Insulation Rating Rating Temp. Flammability ment Approvals
ation Option (AWG) Dia. Max. (A)** Max. (VAC) Range (°C) Contacts
.050" Centerline
MTA-50 IDC Connector .050 IDC Planned 2–28 30–26 .039*1 30 –55 to +105 V-0 & V-2 No
Kits and Headers 1.27 0.99
.100" Centerline
MTA-100 Connectors .100 IDC Yes 2–28 28–22 .060* 5 250 –55 to +105 V-0 & V-2 Yes
and Headers 2.54 1.52
CST-100 II Contacts .100 Crimp Planned 2–28 26–22 .065 4 250 –55 to +105 V-0 Yes
and Housings 2.54 1.65
.156" Centerline
MTA-156 Connectors .156 IDC Yes 2–24 26–18 .095* 7 600 –55 to +105 V-0 & V-2 Yes
and Headers 3.96 2.41
Quad Connectors .156 IDC No 2–12 22–18 .095* 12.5 600 –55 to +105 V-0 Yes
3.96 2.41
SL-156 Contacts .156 1–24; 2–10 .105
and Housings 3.96 Crimp No w/ through 24–18 2.67 10 250 –25 to +105 V-0 Yes
board latch
SL-156 Large Ins. Dia. (LID) .156 Crimp No 2–24 24–16 .112 10 250 –25 to +105 V-0 Yes
Contacts and Housings 3.96 2.84
.156", .200" and .312" Centerlines
.156 Crimp No 1–12 22–18 .118 8 (1 pos.) 250 –25 to +105 V-0 Yes
3.96 3.00 7.5 (2–12 Pos.)
AMP Economy Power .200 Crimp No 2–12 22–18 .118 250 –25 to +105 V-0 Yes
(EP) Connector System 5.08 3.00 7.5 (2–12 Pos.)
.312 Crimp No 2–5 22–18 .118 250 –25 to +105 V-0 Yes
7.92 3.00 7.5 (2–5 Pos.)
** When terminated one position at a time.
** Current Rating is application dependent.
Need more information?
Call Technical Support at the
numbers listed below.
Technical Support is staffed
with specialists well versed
in Tyco Electronics products.
They can provide you with:
■Technical support
■Catalogs
■Technical Documents
■Product Samples
■Authorized Distributor
Locations
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Connector Selection Guide
Crimp
SL-156
Crimp
AMP EP Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Table of Contents (Continued)
4
MTA-50
.050 [1.27]
Product Facts
■2–28 contact positions
■Connectors terminate 26,
28 and 30 AWG discrete wire
or .050 [1.27] centerline rib-
bon cable
■Color-coded housings
■Maximum cable insulation
diameter of .039 [0.99] with
PVC insulation only
■IDC contacts pre-loaded in
receptacle housing
■30 V, 1 A contact rating
■Contact design allows for
gold-to-gold or tin-to-tin
interface
■Contacts are lubricated to
prevent fretting corrosion
■Wire feed-thru capability for
daisy-chain wiring or closed
end for point-to-point wiring
■Connectors are polarized for
proper mating
■Manual and semiautomatic
application tooling
■Mating heights shown below:
■Component Recognized by
Underwriters Laboratories
Inc. to US and Canadian
Standards,
File No. E28476
(Connectors and Headers)
File No. E53793
(Ribbon Cable)
The MTA-50 IDC Connector
System is a wire-to-printed cir-
cuit board system with con-
tacts in a staggered, single
row on .050 [1.27] centerline.
The design features wire feed-
through capability for daisy-
chain applications. Insulation
displacement contacts are
used to terminate a wide
range of conductor sizes.
Ribbon cable can also be ter-
minated when the appropriate
receptacle assembly and
strain relief cover are used.
Header assemblies for board
mount applications include
right-angle (horizontal) and
vertical mount products.
These are available in
through-hole and surface
mount configurations.
Typical uses of the MTA-50
IDC connectors would be in
the Appliance, Commercial
and Home Equipment and
Security products industries.
See the following pages for
related products:
■Ribbon Cable (reels), .050
[1.27] centerline (p. 71)
■Application Tooling (p. 76)
■Cable Assemblies (p. 74)
Performance Data
Voltage Rating — 30 VAC
Current Rating — 1 amp max.
Low-Level Resistance —
30 milliohms
Dielectric Withstanding Voltage —
500 VAC
Insulation Resistance —
1,000 megohms
Operating Temperature —
–55°C to +105°C for connector only;
cable rating may be lower
Technical Documents
Application Specification —
114-13072 MTA-50 Connectors
Product Specifications —
108-2113 MTA-50 Connectors
100-4703 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
PVC insulation)
100-6257 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
TPO insulation)
.503
[12.78]
or
.254
[6.45]
Max.
Vertical
Max.
Right-Angle
These matrixes have been
prepared to assist you in
defining the correct mating
halves for the MTA-50 header
and connector kit combina-
tion. Where a “Y” is indicated
the combination is a valid
mating pair.
Note: Tyco Electronics does NOT rec-
ommend intermating connectors and
headers with different contact plat-
ings.
1445120
1445121
1445169
1445172
Connector Kits
1445343 YYYY
1445346 YYYY
1445349 YYYY
1445352 YYYY
1445355 YYYY
1445358 YYYY
1445361 YYYY
1445364 YYYY
1445367 YYYY
1445370 YYYY
1445373 YYYY
1445376 YYYY
1445125
1445126
1445171
1445174
Headers
Connector Kits
Matrix for .000030 [0.00076]
Gold Plated Part Numbers
1445342 YY YY
1445345 Y YYY
1445348 Y YYY
1445351 Y YYY
1445354 Y YYY
1445357 Y YYY
1445360 Y YYY
1445363 Y YYY
1445366 Y YYY
1445369 Y YYY
1445372 Y YYY
1445375 Y YYY
1445123
1445124
1445170
1445173
Connector Kits
Matrix for .000015 [0.00038]
Gold Plated Part Numbers
Matrix for Tin Plated
Part Numbers
1445341 YYYY
1445344 YYYY
1445347 YYYY
1445350 YYYY
1445353 YYYY
1445356 YYYY
1445359 YYYY
1445362 YYYY
1445365 YYYY
1445368 YYYY
1445371 YYYY
1445374 YYYY
Headers Headers
MTA-50 IDC Connector Kit / Header Mateability Guide
MTA-50 IDC Connectors and Headers
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
5
MTA-50
.050 [1.27]
Connector Kits — Ribbon Cable
Feed-Thru and Closed End
Connectors
Material and Finish
Housing — UL 94V-2 rated, thermo-
plastic
Contacts — Phosphor bronze;
.000100 [0.00254] min. tin in wire
termination area, over .000050 [0.00127]
min. nickel; choice on mating end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Color Coding by Wire Size for
UL94V-0 Connectors
26 AWG — Blue
28 AWG — Green
30 AWG — Brown
For Strain Relief Covers see
page 6.
For mating Headers see
pages 9 and 10.
For Mateability Guide, see
matrixes on page 4.
A±.004
[±0.10]
(See Note 1)
.050
[1.27]
.035
[0.89]
.100 ±.003
[2.54 ±0.08]
.190 ±.003
[4.83 ±0.08]
Ref.
Ref.
Position 1
.150
[3.81]
.315 ±.006
[8.00 ±0.15]
Connector Kit Ordering
Information
Connector Kit consists of
Receptacle Assembly and
Strain Relief Cover.
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part num-
ber 1445359
2 position = 0-1445359-2
and
28 position = 2-1445359-8
Base Part Numbers
Connector Feed-Thru Closed End
Type & Connector Kit No. of Connector Kit No. of
Wire Size Part Nos. Circuits Part Nos. Circuits
Tin Plated
26 AWG 1445359 2–28 1445368 2–28
0.12–0.15 mm2
28 AWG 1445362 2–28 1445371 2–28
0.08–0.09 mm2
30 AWG 1445365 2–28 1445374 2–28
0.05–0.06 mm2
.000030 [0.00076] Gold Plated
26 AWG 1445361 2–28 1445370 2–28
0.12–0.15 mm2
28 AWG 1445364 2–28 1445373 2–28
0.08–0.09 mm2
30 AWG 1445367 2–28 1445376 2–28
0.05–0.06 mm2
.000015 [0.00038] Gold Plated
26 AWG 1445360 2–28 1445369 2–28
0.12–0.15 mm2
28 AWG 1445363 2–28 1445372 2–28
0.08–0.09 mm2
30 AWG 1445366 2–28 1445375 2–28
0.05–0.06 mm2
Notes:
1. To determine connector overall
length (dim. A), multiply .050 x the
number of circuits and add .082.
Example: .050 x 10 circuits
equals 0.50 + .082 = .582 [14.78].
2. Strain relief covers shown on
page 6 are required and sold as
part of the Connector Kit.
3. Stranded UL Style 1061 or equiv-
alent wire is recommended.
4. Unless otherwise stated all toler-
ances (except plating) to be ±.005
[±0.13].
5. Consult Product Drawing for
RoHS Compliant information.
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
Receptacle Assemblies — Ribbon Cable
MTA-50 IDC Connectors and Headers (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
6
MTA-50
.050 [1.27]
.090
[2.29]4 Plcs.
.040
[1.02]
.068
[1.73] 2 Plcs.
2 Plcs.
A.255
[6.48]
.237 ±.008
[6.02 ±0.20]
Strain Relief Covers
Material and Finish
Strain Relief Cover — UL 94V-0
rated, thermoplastic, black
Closed End
Feed-Thru and Closed End
No. of Circuits Dim. A No. of Circuits Dim. A
16 .960
24.38
17 1.010
25.65
18 1.060
26.92
19 1.110
28.19
20 1.160
29.46
21 1.210
30.73
22 1.260
32.00
23 1.310
33.27
24 1.360
34.54
25 1.410
35.81
26 1.460
37.08
27 1.510
38.35
28 1.560
39.62
2.260
6.60
3.310
7.87
4.360
9.14
5.410
10.41
6.460
11.68
7.510
12.95
8.560
14.22
9.610
15.49
10 .660
16.76
11 .710
18.03
12 .760
19.30
13 .810
20.57
14 .860
21.84
15 .910
23.11
Closed End
.123 ±.006
[3.12 ±0.15]
.237 ±.008
[6.02 ±0.20]
A
Feed-Thru
Feed-Thru
Connector Kits — Ribbon
Cable (Continued)
MTA-50 IDC Connectors and Headers (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
7
MTA-50
.050 [1.27]
Connector Kits — Discrete Wire
Feed-Thru and Closed End
Connectors
Material and Finish
Housing — UL 94V-2 rated, thermo-
plastic
Contacts — Phosphor bronze;
.000100 [0.00254] min. tin in wire
termination area, over .000050 [0.00127]
min. nickel; choice on mating end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Color Coding by Wire Size for
UL94V-0 Connectors
26 AWG — Blue
28 AWG — Green
30 AWG — Brown
For Strain Relief Covers see
page 8.
For mating Headers see
pages 9 and 10.
For Mateability Guide, see
matrixes on page 4.
A±.004
[±0.10]
(See Note 1)
.050
[1.27]
.035
[0.89]
.100 ±.003
[2.54 ±0.08]
.190 ±.003
[4.83 ±0.08]
Ref.
Ref.
Position 1
.150
[3.81]
.315 ±.006
[8.00 ±0.15]
Base Part Numbers
Connector Feed-Thru Closed End
Type & Connector Kit No. of Connector Kit No. of
Wire Size Part Nos. Circuits Part Nos. Circuits
Tin Plated
26 AWG 1445341 2–28 1445350 2–28
0.12–0.15 mm2
28 AWG 1445344 2–28 1445353 2–28
0.08–0.09 mm2
30 AWG 1445347 2–28 1445356 2–28
0.05–0.06 mm2
.000030 [0.00076] Gold Plated
26 AWG 1445343 2–28 1445352 2–28
0.12–0.15 mm2
28 AWG 1445346 2–28 1445355 2–28
0.08–0.09 mm2
30 AWG 1445349 2–28 1445358 2–28
0.05–0.06 mm2
.000015 [0.00038] Gold Plated
26 AWG 1445342 2–28 1445351 2–28
0.12–0.15 mm2
28 AWG 1445345 2–28 1445354 2–28
0.08–0.09 mm2
30 AWG 1445348 2–28 1445357 2–28
0.05–0.06 mm2
Notes:
1. To determine connector overall
length (dim. A), multiply .050 x the
number of circuits and add .082.
Example: .050 x 10 circuits
equals 0.50 + .082 = .582 [14.78].
2. Strain relief covers shown on
page 8 are required and sold as
part of the Connector Kit.
3. Stranded UL Style 1061 or equiv-
alent wire is recommended.
4. Unless otherwise stated all toler-
ances (except plating) to be ±.005
[±0.13].
5. Consult Product Drawing for
RoHS Compliant information.
Connector Kit Ordering
Information
Connector Kit consists of
Receptacle Assembly and
Strain Relief Cover.
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part num-
ber 1445341
2 position = 0-1445341-2
and
28 position = 2-1445341-8
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
Receptacle Assemblies — Discrete Wire
MTA-50 IDC Connectors and Headers (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
8
MTA-50
.050 [1.27]
Strain Relief Covers
Material and Finish
Strain Relief Cover — UL 94V-0
rated, thermoplastic, black
Closed End
No. of Circuits Dim. A No. of Circuits Dim. A
16 .960
24.38
17 1.010
25.65
18 1.060
26.92
19 1.110
28.19
20 1.160
29.46
21 1.210
30.73
22 1.260
32.00
23 1.310
33.27
24 1.360
34.54
25 1.410
35.81
26 1.460
37.08
27 1.510
38.35
28 1.560
39.62
2.260
6.60
3.310
7.87
4.360
9.14
5.410
10.41
6.460
11.68
7.510
12.95
8.560
14.22
9.610
15.49
10 .660
16.76
11 .710
18.03
12 .760
19.30
13 .810
20.57
14 .860
21.84
15 .910
23.11
Feed-Thru and Closed End
Feed-Thru
.040
[1.02]
.068
[1.73]
.090
[2.29] 4 Plcs.
2 Plcs.
2 Plcs.
.255
[6.48]
.237 ±.008
[6.02 ±0.20]
A
Closed End
.123 ±.006
[3.12 ±0.15]
.237 ±.008
[6.02 ±0.20]
A
Feed-Thru
Connector Kits —
Discrete Wire (Continued)
MTA-50 IDC Connectors and Headers (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
9
MTA-50
.050 [1.27]
Right-Angle
A
.035
[0.89]
.125
[3.18]
.016
[0.41]
.050
[1.27]
Ref.
Ref.
Ref.
Ref.
Circuit #1
.180
[4.57]
.220 ±.003
[5.59 ±0.08]
.035
[0.89]Ref.
Vertical
Material and Finish
Housing — UL 94V-0 rated, thermo-
plastic, black
Contacts — Brass, .000100 [0.00254]
min. tin over .000050 [0.00127] min.
nickel on solder legs; choice on mating
end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
.035
[0.89]
Ref.
Circuit #1
.060
[1.52]
.125
[3.18]
A
Ref.
.050
[1.27]
.016
[0.41]
Ref. Ref.
.035
[0.89]
.170
[4.32]
.220 ±.003
[5.59 ±0.08]
Ref.
Base Part Numbers
Through-Hole
Header No. of
Part Nos. Posts
Standard UL 94V-0, Tin Plated
1445120 2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445125 2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
1445123 2–28
Note: To determine header overall
length (dim. A), multiply .050
x the number of circuits and
add .150. Example: .050 x 6
circuits equals .300 + .150 =
.450 [11.43].
.100
[2.54]
.035
[0.89]
.210
[5.33]
.050
[1.27]
.250*
[6.35]
.031 ±.002
[0.78 ±0.05]
Circuit #1
Typ.
Dia. Typ.
Recommended Mounting Hole Size and
Pattern for .062 [1.57] Thick PC Board
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
Base Part Numbers
Through-Hole
Header No. of
Part Nos. Posts
Standard UL 94V-0, Tin Plated
1445169 2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445171 2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
1445170 2–28
.100
[2.54]
.250*
[6.35]
.035
[0.89]
.068
[1.73]
.0705
[1.90]
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
.050
[1.27]
.031 ±.002
[0.78 ±0.05]
.060 ±.003
[1.52 ±0.08]
Circuit #1
Typ. Dia. Typ.
Dia.
Typ.
Recommended Mounting Hole Size and
Pattern for .062 [1.57] Thick PC Board
Header Ordering Information
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part num-
ber 1445120
2 position = 0-1445120-2
and
28 position = 2-1445120-8
For mating Connector Kits
see pages 5 through 8.
For mateability options, see
matrixes on page 4.
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
Through-Hole Header
Assemblies
MTA-50 IDC Connectors and Headers (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
10
MTA-50
.050 [1.27]
Right-Angle
Vertical
Material and Finish
Housing — UL 94V-0 rated, thermo-
plastic, black
Contacts — Brass, .000100 [0.00254]
min. tin over .000050 [0.00127] min.
nickel on solder pads; choice on mating
end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Boardlock — Phosphor bronze, tin
plated .000100 [0.000254] min. over
.000050 [0.00127] min. nickel
.035
[0.89] Ref.
Circuit #1
A
.170
[4.32]
.249
[6.32]
.220 ±.003
[5.59 ±0.08]
Ref.
For mating Connector Kits
see pages 5 through 8.
For mateability options, see
matrixes on page 4.
Note: To determine header overall
length (dim. A), multiply .050
x the number of circuits and
add .150. Example: .050 x 6
circuits equals .300 + .150 =
.450 [11.43].
.162
[4.11]
.128
[3.25]
.100
[2.54]
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
.050
[1.27]
Circuit #1
Typ. .028 ±.001
[0.71 ±0.03]
.075 ±.001
[1.91 ±0.03]
.070 ±.003
[1.78 ±0.08]
2 Plcs.
.145 ±.003
[3.68 ±0.08]
2 Plcs.
.574*
[14.58]
Recommended PC Board Layout
for use with .010 [0.25] Thick Stencil
Typ.
Base Part Numbers
Surface Mount
Header No. of
Part Nos. Posts
Standard UL 94V-0, Tin Plated
1445172 2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445174 2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
1445173 2–28
Base Part Numbers
Surface Mount
Header No. of
Part Nos. Posts
Standard UL 94V-0, Tin Plated
1445121 2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445126 2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
1445124 2–28
Note: All SMT product is pre-
packaged in standard tape and
reel format.
.162
[4.11]
.574*
[14.58]
.100
[2.54]
.100
[2.54]
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
.050
[1.27]
Circuit #1
Typ.
.100
[2.54]Typ. Typ.
Typ.
.028 ±.001
[0.71 ±0.03]
.065 ±.001
[1.65 ±0.03]
.070 ±.003
[1.78 ±0.08]2 Plcs.
.145 ±.003
[3.68 ±0.08]
2 Plcs.
Recommended PC Board Layout
for use with .010 [0.25] Thick Stencil
Header Ordering Information
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part num-
ber 1445121
2 position = 0-1445121-2
and
28 position = 2-1445121-8
A
.050
[1.27]
.035
[0.89]
Ref.
Ref. Circuit #1
.180
[4.57]
.270
[6.86]
.220 ±.003
[5.59 ±0.08]
Ref.
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
Surface Mount Header
Assemblies
MTA-50 IDC Connectors and Headers (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
11
MTA-100
.100 [2.54]
Product Facts
■Connectors and headers for
2 through 28 positions; wire
sizes of 22, 24, 26 and
28 AWG [0.4-0.08 mm2]
■Wire-to-Post Connectors
preloaded with dual beam
contacts
■Connectors and headers,
except shrouded headers,
are end-to-end stackable
■Connector styles include
both closed end and feed-
thru connectors with locking
ramps, with and without
polarizing tabs
■Molded ribs on housing do
not allow reverse mating
■Posted connectors for 2
through 19 positions
■Connectors preloaded with
IDC contacts
■All contacts are slotted for
insulation displacement
(IDC) terminal technique
■Contacts are lubricated for
fretting corrosion protection
■Benefits derived from the
MTA-100 system include
increased quality and ease
of handling such as—
■One-step assembly
■No wire stripping
■No contact damage
■Reduced wiring errors
■Simpler tooling
■Simple maintenance and
repair
■Meets the material require-
ments of Table 23.1 of
UL1410 Standards for
Television Receiver and
Video Products (wire-to-
post connectors only)
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
R
R
Technical Documents
Product Specification
108-1050 MTA-100 Connectors
Application Specifications
114-1019 MTA-100 Connectors
114-1031 MTA-100 Ribbon Cable
Assembly
MTA-100 connectors
accept discrete and ribbon
cable wire sizes ranging
from 22 – 28 AWG [0.4 –
0.08 mm2] with maximum
insulation outside diameter
of .060 [1.52] for terminat-
ing single wire and .050
[1.27] for mass termination
of wires. Tin plated solid,
fused stranded, or stranded
(7 strands) wire with PVC
insulation can be used on
22 – 28 AWG [0.4 – 0.9 mm2]
MTA-100 connectors and
19 stranded wire on
22–24 AWG [0.4– 0.2 mm2]
MTA-100 connectors. Only
Performance Data*
Voltage Rating — 250 vac
Current Rating — 5 amp max.
Low-Level Resistance —
6 m⍀max. initial
Dielectric Withstanding Voltage —
750 vac/1 min.
Insulation Resistance —
5000 M⍀min. initial
Operating Temperature —
⫺55⬚Cto⫹105⬚C
Note: Refer to page 70 for approved
wire listings.
one wire to be terminated
into an IDC contact slot.
The wire-to-post connector
housing material is flame
retardant thermoplastic,
either UL94V-2 or UL94V-0
rated.
A full line of .100 [2.54]
centerline headers com-
pletes the system. Headers
are available with straight or
right-angle posts, in flat,
polarized or friction lock
styles. Headers are avail-
able in 2 through 28
positions. Shrouded headers
are available in 2 through
14 positions.
*Refer to the Product Specification
for additional electrical, mechanical
and environmental performance
tests and requirements.
.100 [2.54] Centerline MTA-100 IDC Connectors and Headers
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
647532
1744075
647609
12
MTA-100
.100 [2.54]
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 header and connector combination. Where a “Y” is indicated the combination is
a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.
640440 YYYYYYYYYYYYYYYYYYN
640441 YYYYYYYYYYYYYYYYYYN
640442 YYYYYYYYYYYYYYYYYYN
640443 YYYYYYYYYYYYYYYYYYN
640468 YYYYYYYYYYYYYYYYYYN
640469 YYYYYYYYYYYYYYYYYYN
640470 YYYYYYYYYYYYYYYYYYN
640471 YYYYYYYYYYYYYYYYYYN
640620 YYYYYYYYYYYYYYYYYYN
640621 YYYYYYYYYYYYYYYYYYN
640622 YYYYYYYYYYYYYYYYYYN
640623 YYYYYYYYYYYYYYYYYYN
641311 YYYYYYYYYYYYYYYYYYN
641312 YYYYYYYYYYYYYYYYYYN
641313 YYYYYYYYYYYYYYYYYYN
641314 YYYYYYYYYYYYYYYYYYN
641534 YYYYYYYYYYYYYYYYYYN
641535 YYYYYYYYYYYYYYYYYYN
641536 YYYYYYYYYYYYYYYYYYN
641537 YYYYYYYYYYYYYYYYYYN
641653 YYYYYYYYYYYYYYYYYYN
641654 YYYYYYYYYYYYYYYYYYN
641655 YYYYYYYYYYYYYYYYYYN
641656 YYYYYYYYYYYYYYYYYYN
643498 YYYYYYYYYYYYYYYYYYN
643813 YYYYYYYYYYYYYYYYYYN
643814 YYYYYYYYYYYYYYYYYYN
643815 YYYYYYYYYYYYYYYYYYN
643816 YYYYYYYYYYYYYYYYYYN
643828 YYYYYYYYYYYYYYYYYYN
644083 YYYYYYYYYYYYYYYYYYN
644312 YYYYYYYYYYYYYYYYYYN
644313 YYYYYYYYYYYYYYYYYYN
644497 YYYYYYYYYYYYYYYYYYN
644511 YYYYYYYYYYYYYYYYYYN
644512 YYYYYYYYYYYYYYYYYYN
644513 YYYYYYYYYYYYYYYYYYN
644514 YYYYYYYYYYYYYYYYYYN
644540 YYYYYYYYYYYYYYYYYYN
644563 YYYYYYYYYYYYYYYYYYN
644564 YYYYYYYYYYYYYYYYYYN
644565 YYYYYYYYYYYYYYYYYYN
644574 YYYYYYYYYYYYYYYYYYN
644575 YYYYYYYYYYYYYYYYYYN
644576 YYYYYYYYYYYYYYYYYYN
644577 YYYYYYYYYYYYYYYYYYN
644578 YYYYYYYYYYYYYYYYYYN
644579 YYYYYYYYYYYYYYYYYYN
644795 YYYYYYYYYYYYYYYYYYN
*1375820 YYYYYYYYNNYYNNYYYYY
*Select contact plating to match header plating.
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYY YY YY YYY Y Y
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYY YY YY YYY Y Y
NNYYY YY YY YYY Y Y
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYY YY YY YYY Y Y
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYY YY YY YYY Y Y
NNYYY YY YY YYY Y Y
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
NNYYYYYYYYYYYY
YYYYYYYYYYYYYY
640452
640453
640454
640455
640456
640457
644456
644457
644486
644488
644694
644695
644803
644861
644874
644875
644876
644877
644892
644893
644894
647047
647048
647050
647051
647106
647166
Headers
Connectors
Matrix for Tin Plated
Part Numbers
647502
647531
647623
MTA-100 Connector/Header Mateability Guide
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
13
MTA-100
.100 [2.54]
641237 YYYYYYYYYYYYNNNYYY
641238 YYYYYYYYYYYYNNNYYY
641239 YYYYYYYYYYYYNNNYYY
641240 YYYYYYYYYYYYNNNYYY
641241 YYYYYYYYYYYYNNNYYY
641242 YYYYYYYYYYYYNNNYYY
641243 YYYYYYYYYYYYNNNYYY
641244 YYYYYYYYYYYYNNNYYY
644020 YYYYYYYYYYYYNNNYYY
644042 YYYYYYYYYYYYNNNYYY
644043 YYYYYYYYYYYYNNNYYY
644044 YYYYYYYYYYYYNNNYYY
644702 YYYYYYYYYYYYNNNYYY
644726 YYYYYYYYYYYYNNNYYY
*1375820 YYYYYYNNYYYYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
YYYYYYYY
641211
641212
641213
641214
641215
641216
644487
644489
644884
644885
644886
644887
644896
644897
644898
647108
647109
647114
647116
647117
647168
Headers
Connectors
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 header and connector combination. Where a “Y” is indicated the combination is
a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
641190 YYY YYYYYYYYYY YYYYYYY Y
641191 YYY YYYYYYYYYY YYYYYYY Y
641192 YYY YYYYYYYYYY YYYYYYY Y
641193 YYY YYYYYYYYYY YYYYYYY Y
641198 YYY YYYYYYYYYY YYYYYYY Y
641199 YYY YYYYYYYYYY YYYYYYY Y
641200 YYY YYYYYYYYYY YYYYYYY Y
641201 YYY YYYYYYYYYY YYYYYYY Y
644038 YYY YYYYYYYYYY YYYYYYY Y
644040 YYY YYYYYYYYYY YYYYYYY Y
647477 YYY YYYYYYYYYY YYYYYYY Y
647480 YYY YYYYYYYYYY YYYYYYY Y
*1375820 NNN NNNNNNNNNN NNNNNNY Y
1744020 YYY YYYYYYYYYY YYYYYYY Y
641122
641123
641124
641125
641126
641127
644888
644889
644890
644891
647075
647076
647078
647079
647107
647167
Headers
Connectors
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
*Select contact plating to match header plating.
647626
647624
647534
1744047
647625
647627
647533
1744074
MTA-100 Connector/Header Mateability Guide (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
1744163
647467
14
MTA-100
.100 [2.54]
Material and Finish
Housing — UL94V-2 rated, nylon, see
below for color; or UL94V-0 rated,
nylon, black
Contacts — Phosphor bronze, post tin
plated, .000030 [0.00076] or .000015
[0.00038] post gold-plated over nickel
Closed End Connectors
.520
[13.21]
.275
[6.99]
.075
[1.91]
.245
[6.22]
.275
[6.99]
.184
[4.67]
.100
[2.54] Typ.
A
.056
[1.42]
Without Polarizing Tabs
With Polarizing Tabs
.075
[1.91]
.228
[5.80]
.520
[13.21]
.275
[6.99]
.075
[1.91]
.245
[6.22]
.305
[7.75] .184
[4.67]
.100
[2.54] Typ.
A
.056
[1.42]
Without Polarizing Tabs
With Polarizing Tabs
.075
[1.91]
.228
[5.80]
Feed-Thru Connectors
Color Coding by
Wire Size for UL94V-2
Connectors
28 AWG — Green
26 AWG — Blue
24 AWG — White
22 AWG — Red
All wire sizes in UL94V-0 —
Black
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 20 thru 30.
Notes:
1. Refer to pages 70-74 for
approved wire listing.
2. For strain reliefs and dust covers,
see page 16.
3. For keying plugs, see page 17.
4. Other circuit sizes are available
upon request. Minimums may
apply.
5. Connector circuits can be molded
closed for keying purposes.
Minimums may apply.
6. Where no part numbers appear in
the chart, parts can be made
available upon request. Minimums
may apply.
7. To determine connector overall
length (dim. A), multiply .100 x the
number of circuits. Example: .100
x 10 circuits equals 1.000 inch
[25.4 mm].
MTA-100 IDC Connectors—Closed End and Feed-Thru
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
15
MTA-100
.100 [2.54]
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number, and their
RoHS (Restrictions on
Certain Hazardous
Substances) Compliant
(lead free) equivalent avail-
able for the described con-
nectors.
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position closed end con-
nector without polarizing tabs
for 22 AWG wire would be:
Base number 640440 plus
prefix-and-suffix
4- —-0
The correct ordering num-
ber is 4-640440-0
All part numbers are the
RoHS equivalent version.
Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-640440-2
3 3-640440-3
4 3-640440-4
5 3-640440-5
6 3-640440-6
7 3-640440-7
8 3-640440-8
9 3-640440-9
10 4-640440-0
11 4-640440-1
12 4-640440-2
13 4-640440-3
14 4-640440-4
15 4-640440-5
16 4-640440-6
17 4-640440-7
18 4-640440-8
19 4-640440-9
20 5-640440-0
21 5-640440-1
22 5-640440-2
23 5-640440-3
24 5-640440-4
25 5-640440-5
26 5-640440-6
27 5-640440-7
28 5-640440-8
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Base Part Numbers
Closed End Feed-Thru
Without Tabs With Tabs Without Tabs With Tabs
Connector Type
& Wire Size Connector RoHS Connector RoHS Connector RoHS Connector RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-2, Tin Plated
22 AWG 640440 32–58 643813 32–58 640620 32–58 644540132–45
0.3–0.4 mm2
24 AWG 640441 32–58 643814 32–58 640621 32–58 644563132–54
0.2 mm2
26 AWG 640442 32–58 643815 32–58 640622 32–58 644564132–45
0.12–0.15 mm2
28 AWG 640443 32–58 643816 32–58 640623 32–58 644565132–45
0.08–0.09 mm2
Tape Mounted on Reel UL94V-2, Tin Plated
22 AWG 640468 32–58 644511 42–68 641311 32–58 ——
0.3–0.4 mm2
24 AWG 640469 32–58 644512 32–58 641312 32–58 ——
0.2 mm2
26 AWG 640470 32–58 644513 32–58 641313 32–58 ——
0.12–0.15 mm2
28 AWG 640471 32–58 644514 32–58 641314 32–58 ——
0.08–0.09 mm2
Standard UL94V-2, .000030 [0.00076] Gold Plated
22 AWG 641237 32–58 644042 32–58 641241 32–58 644702132–45
0.3–0.4 mm2
24 AWG 641238 32–58 644020 32–58 641242 32–58 ——
0.2 mm2
26 AWG 641239 32–58 644043132–44 641243 32–58 644726132–45
0.12–0.15 mm2
28 AWG 641240 32–58 644044132–44 641244 32–58 ——
0.8–0.9 mm2
Standard UL94V-2, .000015 [0.00038] Gold Plated
22 AWG 641190 32–58 644038132–44 641198 32–58 647477 32–46
0.3–0.4 mm2
24 AWG 641191 32–58 1744020132–44 641199 32–58 ——
0.2 mm2
26 AWG 641192 32–58 644040132–44 641200 32–58 647480 32–43
0.12–0.15 mm2
28 AWG 641193 32–58 ——641201 32–58 ——
0.08–0.09 mm2
LED*, UL94V-2, Tin Plated (See Note 1)
22 AWG 641534 32–33 ——641653 32–33 ——
0.3–0.4 mm2
24 AWG 641535 32–33 644795 32–33 641654 32–33 ——
0.2 mm2
26 AWG 641536 32–33 ——641655 32–33 ——
0.12–0.15 mm2
28 AWG 641537 32–33 ——641656 32–33 ——
0.08–0.09 mm2
Standard UL94V-0, Tin Plated (Gold is available, minimums may apply.) (Black in color)
22 AWG 643498132–45 644083132–45 644575132–45 644578132–45
0.3–0.4 mm2
24 AWG 644574132–45 644312132–45 644576132–45 644579132–45
0.2 mm2
26 AWG 643828132–45 644313132–45 644577132–45 644497132–45
0.12–0.15 mm2
*LED connectors are designed to mate with .014–.020 [0.36–0.51] diameter posts or square leads.
1Other circuit sizes are available upon request. Minimums may apply.
2Tape mounted.
Note: Blocked circuit configurations are available. Contact product engineer or product manager for details.
Minimums may apply.
MTA-100 IDC Connectors—Closed End and Feed-Thru (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
16
MTA-100
.100 [2.54]
Covers
Material (RoHS Compliant)
Strain Relief Cover — UL94V-2
rated, nylon, white
Dust Covers — UL94V-0 rated,
polyester, white
Closed End Strain Relief Covers
Feed-Thru Strain Relief Covers
Closed End Dust Covers
Feed-Thru Dust Covers
.340
[8.64]
.345
[8.76]
.127
[3.23]
Note: This portion of the front locking bar
may or may not be present.
A
A.130
[3.3]
.105
[2.67]
.360
[9.14]
Retention Dimple .335
[8.51]
.360
[9.14]
Note: This portion of the front locking bar
may or may not be present.
A
.127
[3.23]
A
.130
[3.3]
.245
[6.22]
.395
[10.03]
Retention Dimple
Cover Ordering Information
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for
a 10-position closed end
strain relief cover would be:
Base number 643075 plus
prefix-and-suffix
1- —-0
The correct ordering num-
ber is
1-643075-0
Base Part Numbers
Closed End Feed-Thru
Strain Relief Dust Strain Relief Dust
Covers Covers Covers Covers
Cover No. of Cover No. of Cover No. of Cover No. of
Part Nos. Circuits Part Nos. Circuits Part Nos. Circuits Part Nos. Circuits
643075 2–28 640550 2–28 643077 2–28 640642 3-28
Cover Length
No. of Dim. Prefix/
Circuits A Suffix
2.200 -2
5.08
3.300 -3
7.62
4.400 -4
10.16
5.500 -5
12.7
6.600 -6
15.24
7.700 -7
17.78
8.800 -8
20.32
9.900 -9
22.86
10 1.00 1- -0
25.4
11 1.100 1- -1
27.94
12 1.200 1- -2
30.48
13 1.300 1- -3
33.02
14 1.400 1- -4
35.56
15 1.500 1- -5
38.1
16 1.600 1- -6
40.64
17 1.700 1- -7
43.18
18 1.800 1- -8
45.72
19 1.900 1- -9
48.26
20 2.000 2- -0
50.8
21 2.100 2- -1
53.34
22 2.200 2- -2
55.88
No. of Dim. Prefix/
Circuits A Suffix
No. of Dim. Prefix/
Circuits A Suffix
No. of Dim. Prefix/
Circuits A Suffix
23 2.300 2- -3
58.42
24 2.400 2- -4
60.96
25 2.500 2- -5
63.5
26 2.600 2- -6
66.04
27 2.700 2- -7
68.58
28 2.800 2- -8
71.12
MTA-100 IDC Connector Accessories
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
17
MTA-100
.100 [2.54]
Replacement IDC Contacts
Material and Finish
Phosphor bronze, post tin plated;
.000030 [0.00076] or .000015
[0.00038] post gold plated over nickel
Note: Tyco Electronics does not rec-
ommend terminating an MTA
contact more than one time.
Use replacement contacts
when required for field repairs
or wire changes.
Wire Size Part Numbers
AWG mm2Standard .000030 [0.00076] .000015 [0.00038] LED
Tin Plated Gold Plated Gold Plated Tin Plated
22 0.3–0.4 640636-3 641186-4 641186-3 641643-2
24 0.2 640637-3 641187-4 641187-3 641644-2
26 0.12–0.15 640638-3 641188-4 641188-3 641645-2
28 0.08–0.09 640639-2 641189-4 641189-3 641646-2
Crimp Snap-In Contacts
Material and Finish
Phosphor bronze, tin plated
Wire Size Part Nos.
AWG mm2Loose Piece* Strip**
26-22 0.12–0.4 640709-2 640708-2
**Hand Tool No. 59836-1 (IS 408-6527)
**Applicator No. 466747-1 (IS 408-8040)
Special applications for crimp snap-in contacts are:
1. Double wire per contact
2. Coax or shielded wire
3. Mixed wire size in same connector
Note: Only one crimp snap-in contact per connector.
.125
[3.18]
.038
[0.97]
.077
[1.96]
.065
[1.65]
.300
[7.62]
.500
[12.7]
.027
[0.69] Sq.
Ref.
1.800
[45.72] Ref.
2
.452
[11.48] .075
[1.91]
.070
[1.78]
.070
[1.78]
.142
[3.61]
Max.
.425
[10.8]
Keying Plug with Carrier
Strip (10 plugs per strip)
Part No. 641994-1
Material (RoHS Compliant)
UL94V-2 rated, nylon, natural color
Note: Removal of contact is not
necessary when using keying plug.
MTA-100 IDC Connector Accessories (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
18
MTA-100
.100 [2.54]
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not accept-
able for mating.
640440 YYYYYYYY
640441 YYYYYYYY
640442 YYYYYYYY
640443 YYYYYYYY
640468 YYYYYYYY
640469 YYYYYYYY
640470 YYYYYYYY
640471 YYYYYYYY
640620 YYYYYYYY
640621 YYYYYYYY
640622 YYYYYYYY
640623 YYYYYYYY
641311 YYYYYYYY
641312 YYYYYYYY
641313 YYYYYYYY
641314 YYYYYYYY
641534 YYYYYYYY
641535 YYYYYYYY
641536 YYYYYYYY
641537 YYYYYYYY
641653 YYYYYYYY
641654 YYYYYYYY
641655 YYYYYYYY
641656 YYYYYYYY
643498 YYYYYYYY
643813 Y* Y* Y* Y* Y* Y* Y* Y*
643814 Y* Y* Y* Y* Y* Y* Y* Y*
643815 Y* Y* Y* Y* Y* Y* Y* Y*
643816 Y* Y* Y* Y* Y* Y* Y* Y*
643828 YYYYYYYY
644083 Y* Y* Y* Y* Y* Y* Y* Y*
644312 Y* Y* Y* Y* Y* Y* Y* Y*
644313 Y* Y* Y* Y* Y* Y* Y* Y*
644497 Y* Y* Y* Y* Y* Y* Y* Y*
644511 Y* Y* Y* Y* Y* Y* Y* Y*
644512 Y* Y* Y* Y* Y* Y* Y* Y*
644513 Y* Y* Y* Y* Y* Y* Y* Y*
644514 Y* Y* Y* Y* Y* Y* Y* Y*
644540 Y* Y* Y* Y* Y* Y* Y* Y*
644563 Y* Y* Y* Y* Y* Y* Y* Y*
644564 Y* Y* Y* Y* Y* Y* Y* Y*
644565 Y* Y* Y* Y* Y* Y* Y* Y*
644574 YYYYYYYY
644575 YYYYYYYY
644576 YYYYYYYY
644577 YYYYYYYY
644578 Y* Y* Y* Y* Y* Y* Y* Y*
644579 Y* Y* Y* Y* Y* Y* Y* Y*
644795 Y* Y* Y* Y* Y* Y* Y* Y*
1375820 NNNNNNNN
647000
647001
647002
647003
647004
647005
647006
647007
Posted Connectors
Connectors
Matrix for Tin Plated
Part Numbers
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
MTA-100 Posted Connector/Connector Mateability Guide
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
19
MTA-100
.100 [2.54]
641237 YYYYYYYY
641238 YYYYYYYY
641239 YYYYYYYY
641240 YYYYYYYY
641241 YYYYYYYY
641242 YYYYYYYY
641243 YYYYYYYY
641244 YYYYYYYY
644020 Y* Y* Y* Y* Y* Y* Y* Y*
644042 Y* Y* Y* Y* Y* Y* Y* Y*
644043 Y* Y* Y* Y* Y* Y* Y* Y*
644044 Y* Y* Y* Y* Y* Y* Y* Y*
644702 Y* Y* Y* Y* Y* Y* Y* Y*
644726 Y* Y* Y* Y* Y* Y* Y* Y*
1375820 NNNNNNNN
647008
647009
647010
647011
647012
647013
647014
647015
Posted Connectors
Connectors
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not accept-
able for mating.
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
641190 YYYYYYYY
641191 YYYYYYYY
641192 YYYYYYYY
641193 YYYYYYYY
641198 YYYYYYYY
641199 YYYYYYYY
641200 YYYYYYYY
641201 YYYYYYYY
644038 Y* Y* Y* Y* Y* Y* Y* Y*
644040 Y* Y* Y* Y* Y* Y* Y* Y*
647477 Y* Y* Y* Y* Y* Y* Y* Y*
647480 Y* Y* Y* Y* Y* Y* Y* Y*
1375820 NNNNNNNN
1744020 Y* Y* Y* Y* Y* Y* Y* Y*
647008
647009
647010
647011
647012
647013
647014
647015
Posted Connectors
Connectors
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
MTA-100 Posted Connector/Connector Mateability Guide (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Base Part Numbers
Connector Type Closed End Connector Feed-Thru Connector
& Wire Size Part Nos. RoHS Equiv. Part Nos. No. of Circuits
Standard UL 94V-2, Tin Plated
22 AWG 647000 647004 —2
0.3–0.4 mm232–491
24 AWG 647001 32–491647005 —2
0.2 mm2
26 AWG 647002 32–491647006 —2
0.12–0.15 mm2
28 AWG 647003 32–491647007 —2
0.08–0.09 mm2
Standard UL 94V-2, .000030 [0.00076] Gold Plated
22 AWG 647008 32–491647012 —2
0.3–0.4 mm2
24 AWG 647009 32–491647013 —2
0.2 mm2
26 AWG 647010 32–491647014 —2
0.12–0.15 mm2
28 AWG 647011 32–491647015 —2
0.08–0.09 mm2
Standard UL 94V-2, .000015 [0.00038] Gold Plated
22 AWG 647016 32–491647020 —2
0.3–0.4 mm2
24 AWG 647017 32–491647021 —2
0.2 mm2
26 AWG 647018 32–491647022 —2
0.12–0.15 mm2
28 AWG 647019 32–491647023 —2
0.08–0.09 mm2
12 and 3 position MTA-100 Posted Connectors (Closed End) can not mate with MTA-100 connectors with polarizing tabs.
2Parts may be manufactured upon request. Minimums may apply. Contact product engineer or product manager for details.
20
MTA-100
.100 [2.54]
Material and Finish
Housing — UL 94V-2 rated, nylon, see
chart for color
Contacts — Copper alloy, post tin or
gold plated over nickel (see chart)
Notes:
1. Mating half visuals - pages 14 & 15.
2. Use feed thru strain relief covers & feed
thru dust covers (if needed) - page 16.
3. Approved wire listing - pages 70 thru 74.
Closed End Feed-Thru
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are
determined by the number of
circuit positions in the connec-
tor. For example, the complete
part number for a 12-position
closed end connector for
22 AWG wire would be:
Base number 647000 plus
prefix-and-suffix
4- —-2
The correct ordering number is
4-647000-2
All part numbers are the RoHS
equivalent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-647000-2
thru
19 4-647000-9
See page 15 for an explanation of RoHS
lead free equivalents.
Note: All RoHS equivalent part numbers
may not be available upon catalog
release. If the number you need is not
available, please contact Product
Engineering to expedite your request.
Color Coding by Wire Size
for UL 94V-2 Connectors
22 AWG — Red
24 AWG — White
26 AWG — Blue
28 AWG — Green
Performance Data
Voltage Rating — 250 VAC
Current Rating — 4 amp max.
Low-Level Resistance —
16 mΩmax. initial
Dielectric Withstanding Voltage —
750 VAC/1 min.
Insulation Resistance — 5000 MΩ
min. initial
Operating Temperature —
–55°C to +105°C
Technical Documents
Product Specification
108-1050-1 MTA-100 Posted
Connector
Application Specification
114-1019 MTA-100 Connectors
Replacement IDC Contacts
Material and Finish
Contacts — Copper alloy, post tin or
gold plated over nickel
No. of Dim.
Circuits AB
2.300 .227
[7.62] [5.77]
3.400 .327
[10.16] [8.31]
4.500 .427
[12.70] [10.85]
5.600 .527
[15.24] [13.39]
No. of Dim.
Circuits AB
6.700 .627
[17.78] [15.93]
7.800 .727
[20.32] [18.47]
8.900 .827
[22.86] [21.01]
91.000 .927
[25.40] [23.55]
No. of Dim.
Circuits AB
10 1.100 1.027
[27.94] [26.09]
11 1.200 1.127
[30.48] [28.63]
12 1.300 1.227
[33.02] [31.17]
13 1.400 1.327
[35.56] [33.71]
No. of Dim.
Circuits AB
14 1.500 1.427
[38.10] [36.25]
15 1.600 1.527
[40.64] [38.79]
16 1.700 1.627
[43.18] [41.33]
17 1.800 1.727
[45.72] [43.87]
18 1.900 1.827
[48.26] [46.41]
19 2.000 1.927
[50.80] [48.95]
Part Numbers
Wire Size Tin .000030
AWG mm2Plated [.00076]
Gold Plated
22 0.3–0.4 3-647030-1 3-647030-2
24 0.2 3-647031-1 3-647031-2
26 0.12–0.15 3-647032-1 3-647032-2
28 0.8–0.9 3-647033-1 3-647033-2
.843
[21.40]
B
Dim.
.303
[7.70]
.079
[2.00]
.415
[10.54]
.025
[0.54] Sq.
.100
[2.54] Typ.
ADim.
.843
[21.40]
B
Dim.
.303
[7.70]
.079
[2.00]
.415
[10.54]
.025
[0.54] Sq.
.100
[2.54] Ty p .
ADim.
.083
[2.10]
.770
[19.55]
.075
[1.91]
.025
[0.64]
MTA-100 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
21
MTA-100
.100 [2.54]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts
would be:
Base number 641211 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-641211-0
All part numbers are the RoHS
equivalent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-641211–2
thru
28 5-641211-8
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Straight Post (.025 [0.64] Square)
.200
[5.08]
A
.025
[0.64]
Sq.
.100
[2.54]
Typ.
.050
[1.27]
Typ.
Post No. 1 .295
[7.49]
.100
[2.54]
.140
[3.56]
Ref.
.535
[13.59]
.200
[5.08]
A
.100
[2.54]
.025
[0.64]
Sq.
.050
[1.27]
Typ.
.100
[2.54]
Typ.
.140
[3.56]
Ref.
.295
[7.49]
.062
[1.57]
Post No. 1
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
X= .120 [3.05] min., .240 [6.1] max.
when mated with MTA-100 Connector.
X= .120 [3.05] min., when mated with
CST-100 II Connector.
Right-Angle Post (.025 [0.64] Square)
Base Part Numbers
Straight Posts Right-Angle Posts
Header No. of Posts/ Header No. of Posts/
Part Nos. RoHS Equiv. Part Nos. RoHS Equiv.
Standard UL94V-0, Tin Plated
640452 2–28 640453 2–28
Standard UL94V-0, .000030 [0.00076] Gold Plated
641211 2–28 641212 2–28
32–58 32–58
Standard UL94V-0, .000015 [0.00038] Gold Plated
641122 2–28 641123 2–28
32–58 32–58
.100
[2.54]
Typ.
.050/.040
[1.27/1.02]
Edge of Board
.120
[3.05]
Min.
Dia.
.100
[2.54] Typ.
.050/.040
[1.27/1.02]
Edge of Board
X
Dia.
Note: Consult Product Drawing for details
on placing headers onto PC boards.
MTA-100 Flat Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
22
MTA-100
.100 [2.54]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers without retentive legs are
suitable for breakaway application.
3. 2 or 3 retentive leg(s) per header,
depending upon number of positions.
4. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
5. To determine header overall
length (dim. A) multiply .100 x the
number of posts minus (–) .012.
Example: .100 x 10 posts – .012
= .988 inches [25.1 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
without retentive legs would be:
Base number 644456 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-644456-0
All part numbers are the RoHS
equivalent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-644456-2
thru
28 5-644456-8
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
.044
[1.12]
Typ.
.100
[2.54]
.100
[2.54]
Typ.
A
.092
[2.34]
.150
[3.81] .260
[6.6]
.110
[2.79] Ref.
.025
[0.64]
Sq.
Post No. 1
Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square)
Straight and
Right-Angle
Post with
Retentive Legs
.044
[1.12]
Typ.
.100
[2.54]
Post No. 1
.100
[2.54]
Typ.
.295
[7.49]
.505
[12.83]
.110
[2.79]
Ref.
A.092
[2.34]
.025
[0.64]
Sq.
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
.110
[2.79]
Ref.
.0335
[0.85]
Base Part Numbers
Straight Posts Right-Angle Posts
Without With Without With
Retentive Legs Retentive Legs Retentive Legs Retentive Legs
Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
644456 32–58 644695 32–58 644457 32–58 644694 32–58
Standard UL94V-0, .000030 [0.00076] Gold Plated
644884 2–28 644886 2–28 644885 2–28 644887 2–28
Standard UL94V-0, .000015 [0.00038] Gold Plated
644888 2–28 644890 2–28 644889 2–28 644891 2–28
.100
[2.54]
Typ. .050/.040
[1.27/1.02]
Edge of Board
.060
[1.52]
Min.
Dia.
For Straight Leg
Headers
Dia.
For Retentive Leg
Headers
.037
[0.94 ]
±.002
±0.05
.100
[2.54]
Typ.
Edge of Board
.060
[1.52]
Min.
.050/.040
[1.27/1.02] Dia.
For Straight Leg
Headers
Dia.
For Retentive Leg
Headers
.037
[0.94 ]
±.002
±0.05
Note: Consult Product Drawing for details
on placing headers onto PC boards.
MTA-100 Narrow Flat Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
High temperature product available. Please contact Sales Engineer or Product Information Center.
23
MTA-100
.100 [2.54]
.125
[3.18]
A
.025
[0.64]
Sq.
.100
[2.54]
Typ.
.050
[1.27]
Typ.
Post
No. 1
.295
[7.49]
.100
[2.54]
.535
[13.59]
.290
[7.37]
.035
[0.89]
Min.
.140
[3.56]
Ref.
.225
[5.72]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. All posts on retentive leg headers
are bent.
4. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 641213 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-641213-0
All part numbers are the RoHS
equivalent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-641213-2
thru
28 5-641213-8
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square)
.125
[3.18]
A
.025
[0.64]
Sq.
.100
[2.54]
Typ.
.050
[1.27]
Typ.
Post
No. 1 .295
[7.49] .290
[7.37]
.100
[2.54] .140
[3.56]
.140
[3.56] Max.
.035
[0.89] Min.
.225
[5.72]
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Base Part Numbers
Straight Posts Right-Angle Posts
Without With Without With
Retentive Legs Retentive Legs Retentive Legs Retentive Legs
Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
640454 2–28 644876 2–28 640455 2–28 644877 2–28
Standard UL94V-0, .000030 [0.00076] Gold Plated
641213 32–58 —— 641214 32–58 ——
Standard UL94V-0, .000015 [0.00038] Gold Plated
641124 32–58 —— 641125 32–58 ——
.100
[2.54]
Typ.
Edge of Board
.130
[3.30]
Min.
.050/.040
[1.27/1.02]
Dia. for straight
leg headers
Dia. for retentive
leg headers
.037
[0.94 ]
±.002
±0.05
.100
[2.54]
Typ.
Edge of Board
X
.050/.040
[1.27/1.02]
Dia. for straight
leg headers
Dia. for retentive
leg headers
.037
[0.94 ]
±.002
±0.05
.125
[3.18]
Ref.
34°
.135
[3.43] Ref.
34°
Retentive Leg Retentive Leg
X= .110 [2.79] min., .160 [4.06]
max. when mated with
MTA-100 Connector.
X= .110 [2.79] min., .120 [3.05]
max. when mated with
CST-100 II Connector.
Note: Consult Product Drawing for details
on placing headers onto PC boards.
MTA-100 Polarized Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
24
MTA-100
.100 [2.54]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. All posts on retentive leg headers
are bent.
4. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 641215 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-641215-0
All part numbers are the RoHS
equivalent version. Example:
No. of Standard Lead Free
Pos. Prefix/Suffix RoHS
Prefix/Suffix
2 641215-2 3-641215-2
thru
28 2-641215-8 5-641215-8
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square)
.050
[1.27]
Typ.
Post
No. 1
.295
[7.49]
.100
[2.54]
.140
[3.56]
Ref.
.535
[13.59]
.310
[7.87]
.125
[3.18]
A
.100
[2.54]
Typ.
.040
[1.02]
Max.
.025
[0.64]
Sq.
.225
[5.72]
.125
[3.18]
A
.025
[0.64]
Sq.
.100
[2.54]
Typ.
.050
[1.27]
Typ.
.295
[7.49] .310
[7.87]
.100
[2.54] .140
[3.56]
Max.
.140
[3.56]
.040
[1.02]
Max.
.225
[5.72]
Post
No. 1
Base Part Numbers
Straight Posts Right-Angle Posts
Without With Without With
Retentive Legs Retentive Legs Retentive Legs Retentive Legs
Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
640456 2–28 644874 2–28 640457 2–28 644875 2–28
Standard UL94V-0, .000030 [0.00076] Gold Plated
641215 32–58 —— 641216 32–58 ——
Standard UL94V-0, .000015 [0.00038] Gold Plated
641126 32–58 —— 641127 32–58 ——
.125
[3.18]
Ref.
34°
.135
[3.43]
34°
Retentive Leg Retentive Leg
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
.100
[2.54]
Typ.
Edge of Board
.130
[3.30]
Min.
.050/.040
[1.27/1.02]
Dia. for straight
leg headers
Dia. for retentive
leg headers
.037
[0.94 ]
±.002
±0.05
.100
[2.54]
Typ.
Edge of Board
X
.050/.040
[1.27/1.02]
Dia. for straight
leg headers
Dia. for retentive
leg headers
.037
[0.94 ]
±.002
±0.05
X= .110 [2.79] min., .160 [4.06]
max. when mated with
MTA-100 Connector.
X= .110 [2.79] min., .120 [3.05]
max. when mated with
CST-100 II Connector.
Note: Consult Product Drawing for details
on placing headers onto PC boards.
MTA-100 Friction Lock Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
25
MTA-100
.100 [2.54]
Page_Head (Continued)
Material and Finish
Housing — UL94V-0 rated, thermo-
plastic, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 647609 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-647609-0
All part numbers are the RoHS
equivalent version. Example:
No. of Standard Lead Free
Pos. Prefix/Suffix RoHS
Prefix/Suffix
2 647609-2 3-647609-2
3 647609-3 3-647609-3
4 647609-4 3-647609-4
5 647609-5 3-647609-5
6 647609-6 3-647609-6
7 647609-7 3-647609-7
8 647609-8 3-647609-8
9 647609-9 3-647609-9
10 1-647609-0 4-647609-0
11 1-647609-1 4-647609-1
12 1-647609-2 4-647609-2
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Friction Lock
Polarized
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
.070
[1.78] Min.
Ø .052 ±.002
[1.32 ±0.05]
.100
[2.54]
.090
[2.29]
Ø .040 ±.003
[1.02 ±0.07 ]
Typ.
.025 ±.001
[0.64 ±0.03]
Square Typ.
.113
[2.87]
A.250
[6.35]
.025-.040
[0.64-1.01]
.070
[1.78]
.135
[3.43]
.290±.010
[7.37±0.25].347±.010
[8.81±0.25].550 ±.010
[13.97±0.25]
.125
[3.18]
.050
[1.27]
.100
[2.54]Typ.
Post No.1
.025 ±.001
[0.64 ±0.03]
Square Typ.
.113
[2.87]
A.250
[6.35]
.055
[1.39]
.055
[1.40]
.070
[1.78]
.135
[3.43]
.290 ±.010
[7.37 ±0.25].347 ±.010
[8.81 ±0.25].550 ±.010
[13.97 ±0.25]
.125
[3.18]
.050
[1.27]
Typ.
.100
[2.54]
Post No. 1
Min.
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base Part Numbers
Friction Lock Polarized
Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647609 32-42 647623 32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647626 32-42 647624 32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647627 32-42 647625 32-42 Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
MTA-100 Headers with Retention Peg—Straight
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
26
MTA-100
.100 [2.54]
Material and Finish
Housing — UL94V-0 rated, thermo-
plastic, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall length
(dim. A) multiply .100 x the number
of posts. Example: .100 x 10 posts
equals 1.000 inch [25.4 mm].
4. This product can be mounted in
the middle of the PC Board as
shown in the PCB layout.
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with right-angle posts would be:
Base number 647630 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-647630-0
All part numbers are the RoHS
equivalent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-647630-2
3 3-647630-3
4 3-647630-4
5 3-647630-5
6 3-647630-6
7 3-647630-7
8 3-647630-8
9 3-647630-9
10 4-647630-0
11 4-647630-1
12 4-647630-2
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
.250
[6.35] .113
[2.87]
A
.025
[0.64]
Sq.
.050
[1.27]
.100
[2.54]
.347
[8.81]
.290
[7.37]
.112
[2.84]
.040
[1.02]
Max.
.125
[3.18]
Post No. 1
.113
[2.87]
.025
[0.64]
Sq.
.100
[2.54]
.050
[1.27]
Post
No. 1
.290
[7.37]
.125
[3.18]
.070
[1.78]
.112
[2.84]
.250
[6.35]
.347
[8.81]
.140
[3.56]
A
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
.100
[2.54] Typ.
.040 ±.003
[1.02 ±0.07]Dia.
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base Part Numbers
Friction Lock Polarized
Right-Angle Posts Right-Angle Posts
Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647630 32-42 647651 32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647629 32-42 647653 32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647628 32-42 647652 32-42
Friction Lock
Right-Angle Post (.025 [0.64] Square)
Polarized
Right-Angle Post (.025 [0.64] Square)
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
MTA-100 High Profile Headers—Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
27
MTA-100
.100 [2.54]
Page_Head (Continued)
Material and Finish
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
13–18 Position — UL94V-0 rated,
LCP, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 647047 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-647047-0
All part numbers are the RoHS
equivalent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-647047-2
thru
12 4-647047-2
13 NA
thru
18 NA
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Straight Post (.025 [0.64] Square)
.113
[2.87]
A
.025
[0.64]
Sq.
.100
[2.54]
.050
[1.27]
Post
No. 1
.290
[7.37]
.135
[3.43]
.550
[13.97]
.070
[1.78]
.125
[3.18]
.250
[6.35]
.347
[8.81]
Right-Angle Post (.025 [0.64] Square)
.113
[2.87]
.025
[0.64]
Sq.
.100
[2.54]
.050
[1.27]
Post
No. 1
.290
[7.37]
.125
[3.18]
.070
[1.78]
.112
[2.84]
.250
[6.35]
.347
[8.81]
.140
[3.56]
A
Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board
.300
[7.62]
.150
[3.81]
.100
[2.54]
Typ.
.040
[1.02]
Pre-Tinned Plated
Thru Hole Typ.
.060
[1.52]
Pre-Tinned Land
Both Sides Typ.
.008
[0.20]
Min. Thk. Solder
Paste In Area Shown
.065
[1.65]
.0325
[0.826]
Post No. 1
For use with Infrared Reflow Process Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base Part Numbers
Straight Posts Straight Posts (Tube Loaded) Right-Angle Posts
Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647047 32–42 647298 32–42 647048 32–42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647109 32–42 647300 32–42 647114 32–42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647075 32–42 647299 32–42 647076 32–42
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
MTA-100 Polarized High Temperature Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
28
MTA-100
.100 [2.54]
Material and Finish
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
13–18 Position — UL94V-0 rated,
LCP, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 647050 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-647050-0
All part numbers are the RoHS
equivalent version. Example:
No. of Standard Lead Free
Pos. Prefix/Suffix RoHS
Prefix/Suffix
2 647050-2 3-647050-2
thru
12 1-647050-2 4-647050-2
13 1-647050-3 NA
thru
18 1-647050-8 NA
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square)
Base Part Numbers
Straight Posts Straight Posts (Tube Loaded) Right-Angle Posts
Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647050 32-42 647295 32-42 647051 32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647116 32-42 647297 32-42 647117 32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647078 32-42 647296 32-42 647079 32-42
Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board
.300
[7.62]
.150
[3.81]
.100
[2.54]
Typ.
.040
[1.02]
Pre-Tinned Plated
Thru Hole Typ.
.060
[1.52]
Pre-Tinned Land
Both Sides Typ.
.008
[0.20]
Min. Thk. Solder
Paste In Area Shown
.065
[1.65]
.0325
[0.826]
Post No. 1
.250
[6.35] .113
[2.87]
A
.025
[0.64]
Sq.
.050
[1.27]
.100
[2.54]
.130
[3.30]
.550
[13.97]
.347
[8.81]
.290
[7.37]
.040
[1.02]
Max.
.125
[3.18]
Post No. 1
.250
[6.35] .113
[2.87]
A
.025
[0.64]
Sq.
.050
[1.27]
.100
[2.54]
.347
[8.81]
.290
[7.37]
.112
[2.84]
.040
[1.02]
Max.
.125
[3.18]
Post No. 1
For use with Infrared Reflow Process Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
MTA-100 Friction Lock High Temperature Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
29
MTA-100
.100 [2.54]
Material and Finish
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
13–18 Position — UL94V-0 rated,
LCP, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position sur-
face mount polarized header
would be:
Base number 647106 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-647106-0
All part numbers are the RoHS
equivalent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-647106-2
12 4-647106-2
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Polarized Header Friction Lock Header
Recommended PC Board Layout for use with .010 [0.25] Thick Stencil
.250
[6.35]
.318
[8.08]
Ref.
.113
[2.87]
.025
[0.64]
Sq.
.050
[1.27]
.100
[2.54]
.347
[8.81]
.290
[7.37]
.070
[1.78]
.125
[3.18]
.159
[4.04]
Typ.
Post No. 1
.250
[6.35]
.318
[8.08]
Ref.
.113
[2.87]
.025
[0.64]
Sq.
.050
[1.27]
.100
[2.54]
.347
[8.81]
.290
[7.37]
.040
[1.02]
Max.
.125
[3.18]
.159
[4.04]
Post No. 1
.235
[5.97]
.100
[2.54]
Typ.
.060
[1.52]
.070
[1.78]
Post No. 1
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
For use with Infrared Reflow Process Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
Base Part Numbers
Polarized Headers Friction Lock Headers
Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647106 32-42 647166 32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647108 32-42 647168 32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647107 32-42 647167 32-42
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
MTA-100 Polarized and Friction Lock Surface Mount Headers—Straight
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Tape Mount Part Numbers
Polarized Headers Friction Lock Headers
Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647531 32-42 647502 32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
1744163 32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647467 32-42
30
MTA-100
.100 [2.54]
Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square)
Material and Finish
Housing — UL94V-0 rated, polyester,
black
Posts — Copper alloy, tin plated; or
.000030 [0.00076] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers with .000015 [0.00038]
gold plated post are available
upon request. Minimums may
apply.
3. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14 and 15.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
with pegs would be:
Base number 644486 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-644486-0
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Notes:
1. Select load headers (omitted pin
headers) are available upon
request. Please contact product
engineer or product manager for
details.
2. MTA-100 shrouded headers
do not mate with CST-100 II hous-
ings.
A
.025
[0.64]
Typ. .100
[2.54]
.092
[2.34]
Typ. Ref.
Post No. 1
.313
[7.95]
.410
[10.41]
.140
[3.56]
.176
[4.47]
Ref.
.107
[2.72]
Ref.
.125
[3.18]
.200
[5.08] .440
[11.18]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
(Solder Side of Board Shown)
Polarized
Retention Peg
.042
[1.07]
.100
[2.54]
Typ.
.081/.075
[2.06/1.91]
.124
[3.15]
Edge of Board
.125
[3.18]
Min.
.050/.040
[1.27/1.02]
Dia.
Dia.
A
.025
[0.64]
Typ. .100
[2.54]
.092
[2.34]
Typ. Ref.
Post No. 1
.313
[7.95]
.410
[10.41]
.176
[4.47]
Ref.
.130
[3.30]
.200
[5.08]
.050
[1.27]
Max.
.137
[3.48]
Ref.
.100
[2.54]
Typ.
Edge of Board
.300
[7.62]
Max.
.050/.040
[1.27/1.02]Dia.
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
(Solder Side of Board Shown)
Header Length
No. of Dim. Prefix/
Circuits A Suffix
2.284 3- -2
7.21
3.384 3- -3
9.75
4.484 3- -4
12.29
5.584 3- -5
14.83
6.684 3- -6
17.37
7.784 3- -7
19.91
8.884 3- -8
22.45
9.984 3- -9
24.99
No. of Dim. Prefix/
Circuits A Suffix
10 1.084 4- -0
27.53
11 1.184 4- -1
30.07
12 1.284 4- -2
32.61
13 1.384 4- -3
35.15
No. of Dim. Prefix/
Circuits A Suffix
14 1.484 4- -4
37.69
No. of Dim. Prefix/
Circuits A Suffix
.206
[5.23]
Ref.
.130
[3.30]
Ref.
Rear Bend
Front Bend
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base Part Numbers
Straight Posts Right-Angle Posts
With Without Without Pegs Only
Pegs Pegs Front Bend Rear Bend
Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
644486 22-34 644861 22-34 644488 22-34 644803 22-34
Standard UL94V-0, .000030 [0.00076] Gold Plated
644487 22-34 —— 644489 22-34 ——
MTA-100 Shrouded Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
31
CST-100 II
.100 [2.54]
Product Facts
■Low cost wire-to-board
interconnections
■Wide wire range for single
contact
■Tin and gold plated
contacts
■Mates with specified MTA
and similar competitive
notched headers
■Plastic latching feature in
housing helps prevent con-
tact backout
■Locking ramps and polariz-
ing tabs are standard
■For keying purposes use
keying plug 641994-1
(page 17)
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 21 thru 29 and 32.
See page 15 for an explanation of
RoHS lead free equivalents.
®
.260
[6.60]
Ref.
.510
[12.95]
.190
[4.83]
A
.100
[2.54]
Typ.
.060
[1.52]
Typ.
Performance Data
Voltage Rating — 250 vac
Current Rating — 4 amp max.
Low-Level Resistance — 6 m⍀
max. initial; 10 m⍀max. final
Insulation Resistance — 1000 M⍀
min. initial; 100 M⍀min. final
Operating Temperature —
⫺55⬚Cto⫹105⬚C
Technical Documents
Product Specification
108-1948
Application Specification
114-13036
Instruction Sheet
408-8493
No. of Dim. Part
Pos. A Numbers
2.220 1375820-2
5.59
3.320 1375820-3
8.13
4.420 1375820-4
10.67
5.520 1375820-5
13.21
6.620 1375820-6
15.75
7.720 1375820-7
18.29
8.820 1375820-8
20.83
9.920 1375820-9
23.37
10 1.020 1-1375820-0
25.91
11 1.120 1-1375820-1
28.45
12 1.220 1-1375820-2
30.99
13 1.320 1-1375820-3
33.53
14 1.420 1-1375820-4
36.07
15 1.520 1-1375820-5
38.61
No. of Dim. Part
Pos. A Numbers
16 1.620 1-1375820-6
41.15
17 1.720 1-1375820-7
43.69
18 1.820 1-1375820-8
46.23
19 1.920 1-1375820-9
48.77
20 2.020 2-1375820-0
51.31
21 2.120 2-1375820-1
53.85
22 2.220 2-1375820-2
56.39
23 2.320 2-1375820-3
58.93
24 2.420 2-1375820-4
61.47
25 2.520 2-1375820-5
64.01
26 2.620 2-1375820-6
66.55
27 2.720 2-1375820-7
69.09
28 2.820 2-1375820-8
71.63
Application Tooling
Loose Piece Contacts —
Hand Tool No. 58517-3 (408-4064)
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Applicator No. 567373-3
(Request Catalog 65828)
AMP-O-MATIC Stripper-Crimper
Machine* Applicator No. 567910-1 or
567827-1 (with CQM) (Request Catalog
65004)
AMPOMATOR CLS IIIG Lead Making
Machine* (Request Catalog 82659)
*Requires applicators. For part
numbers, call Technical Support.
Contacts
Part Numbers
Tin Plated 15 Au Gold Plated 30 Au Gold Plated
1375819-1 (Strip) 1375819-2 (Strip) 1375819-3 (Strip)
1445336-1 (Loose Piece) 1445336-2 (Loose Piece) 1445336-3 (Loose Piece)
Material and Finish (RoHS Compliant)
Phosphor bronze, pretinned or .000015 [.00038] gold, over nickel
.000030 [0.00076] gold over nickel
Wire Range — 22–26 AWG [0.35–0.13 mm2]
Max. Ins. Dia. — .065 [1.65]
Housing*
Material (RoHS Compliant)
UL94V-0 rated, nylon, white
.195
[4.95]
.440
[11.17]
.016±.002
[.406±.051]
*Housings without polarizing tabs
may be manufactured upon
request. Minimums may apply.
Contact product engineering or
product manager for details.
.100 [2.54] Centerline CST-100 II Crimp Contacts and Housings
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Base Part Numbers
Straight Posts
With Without Right-Angle Posts
Pegs Pegs Without Pegs Only
Header No. of Header No. of Header No. of
Part Nos. Posts/ Part Nos. Posts/ Part Nos. Posts/
RoHS Equiv. RoHS Equiv. RoHS Equiv.
Standard UL94V-0, Tin Plated
644893 32-44 644892 32-44 644894 32-44
Standard UL94V-0, .000030 [0.00076] Gold Plated
644897 32-44 644896 32-44 644898 32-44
32
CST-100 II
.100 [2.54]
Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square)
Material and Finish
Housing — UL94V-0 rated, polyester,
black
Posts — Copper alloy, tin plated; or
.000030 [0.00076] gold over nickel
A
.025
[0.64]
Typ. .100
[2.54]
.092
[2.34]
Ref.
Post No. 1
.313
[7.95]
.410
[10.41]
.140
[3.56]
.176
[4.47]
Ref.
.107
[2.72]
Ref.
.125
[3.18]
.280
[7.11] .520
[13.21]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
(Solder Side of Board Shown)
.042
[1.07]
.100
[2.54]
Typ.
.081/.075
[2.06/1.91]
.124
[3.15]
Edge of Board
.125
[3.18]
Min.
.050/.040
[1.27/1.02]
Dia.
Dia.
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers with .000015 [0.00038]
gold plated posts are available
upon request. Minimums may
apply.
3. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
page 31.
A
.025
[0.64]
Typ.
.100
[2.54]
.036
[0.91]
Max.
.092
[2.34]
Typ.
Post No. 1
.313
[7.95]
.176
[4.47]
Ref.
.107
[2.72]
Ref.
.140
[3.56]
.280
[7.11]
.100
[2.54]
Typ.
Edge of Board
.450
[11.43]
Max.
.050/.040
[1.27/1.02]Dia.
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
(Solder Side of Board Shown)
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
with pegs would be:
Base number 644893 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-644893-0
All part numbers are the RoHS
equivalent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-644893-2
thru
14 4-644893-4
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
CST-100 II shrouded headers only
mate with CST-100 II housings. All
the MTA-100 headers except the
MTA-100 shrouded headers mate
with CST-100 II housings.
Header Length
No. of Dim. Prefix/
Circuits A Suffix
2.284 3- -2
7.21
3.384 3- -3
9.75
4.484 3- -4
12.29
5.584 3- -5
14.83
6.684 3- -6
17.37
7.784 3- -7
19.91
No. of Dim. Prefix/
Circuits A Suffix
8.884 3- -8
22.45
9.984 3- -9
24.99
10 1.084 4- -0
27.53
No. of Dim. Prefix/
Circuits A Suffix
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Polarized
Retention Peg
CST-100 II Shrouded Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
33
MTA-156
.156 [3.96]
Product Facts
■Connectors and headers for
2 through 24 positions; wire
sizes of 18, 20, 22, 24 and
26 AWG [0 .9– 0.12 mm2]
■Connectors and headers,
except shrouded headers,
are end-to-end stackable
■Quad Connectors for higher
current rating (page 54)
■Posted connectors for 2, 3,
4,6,9,12,15 and 24 posi-
tions
■Card edge connectors for
3, 6, 9,12,15,18 and 20
through 24 positions
■Connectors preloaded with
IDC contacts
■All contacts are slotted for
insulation displacement
(IDC) termination technique
■Connector styles include
both closed end and feed-
thru, with and without lock-
ing ramps and polarizing
tabs
■Molded ribs on housing do
not allow reverse mating
■Contacts are lubricated for
fretting corrosion protection
■Benefits derived from the
MTA-156 system include
increases quality and ease
of handling such as—
■One-step assembly
■No wire stripping
■No contact damage
■Reduced wiring errors
■Simpler tooling
■Simple maintenance
and repair
■Meets the material require-
ments of Table 23.1 of
UL 1410 Standards for
Television Receiver and
Video Products (wire-to-
post connectors only)
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
R
R
MTA-156 connectors
accept discrete and ribbon
cable wire sizes ranging
from 18 – 26 AWG
[0.9– 0.12 mm2] with maxi-
mum insulation outside
diameter.095 [2.41] for sin-
gle wire and .070 [1.78] for
mass termination of wires.
Tin plated solid, fused
stranded or stranded (7, 16,
and 19 strands) wire with
PVC insulation can be used
on 18 AWG [0.8 – 0.9 mm2]
MTA-156 connectors; 7, 10,
and 19 stranded wire on
20 AWG [0.5 – 0.6 mm2]
MTA-156 connectors; and 7
and 19 stranded wire on
22 – 26 AWG [0.4 – 0.12 mm2]
MTA-156 connectors.
Only one wire to be termi-
nated into an IDC contact
slot.
Mass termination of wire
provides the lowest applied
cost because it drastically
reduces the labor content
of virtually any cable or har-
ness assembly required.
Technical Documents
Product Specification
108-1051 MTA-156 Connectors
Application Specifications
114-1020 MTA-156 Connectors,
Posted Connectors and
Card Edge Connectors
114-1032 MTA-156 Ribbon Cable
Assembly
Note: Refer to page 70 for approved
wire listings.
Performance Data*
Voltage Rating — 600 vac
Current Rating —
7 amp max. for MTA-156 Connector
Low-Level Resistance —
3.0 m⍀max. initial
Dielectric Withstanding Voltage —
2200 vac/1 min.
Insulation Resistance —
5000 M⍀min. initial
Operating Temperature —
⫺55⬚Cto⫹105⬚C
*Refer to the Product Specification
for additional electrical, mechanical
and environmental performance
tests and requirements.
The wire-to-post connector
housing material is flame
retardant thermoplastic,
either UL94V-2 or UL94V-0
rated.
A full line of .156 [3.96]
centerline headers com-
pletes the system. Headers
are available with straight
or right-angle posts, in flat
friction lock and shrouded
styles. Headers are available
in 2 through 24 positions.
.156 [3.96] Centerline MTA-156 IDC Connectors and Headers
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
34
MTA-156
.156 [3.96]
MTA-156 Connector/
Header Mateability
Guide
Matrix for Tin Plated
Part Numbers
This matrix has been
prepared to assist you,
our customer, in defin-
ing the correct mating
halves for the MTA-156
header and connector
combination. Where a
“Y” is indicated the
combination is a valid
mating pair. Where an
“N” is indicated the
combination is not
acceptable for mating.
Headers
Connectors
640426 YYYNYYYYYYNYYYYYY
640427 YYYNYYYYYYNYYYYYY
640428 YYYNYYYYYYNYYYYYY
640429 YYYNYYYYYYNYYYYYY
640430 YYYNYYYYYYNYYYYYY
640431 YYYYYYYYYYYYYYYYY
640432 YYYYYYYYYYYYYYYYY
640433 YYYYYYYYYYYYYYYYY
640434 YYYYYYYYYYYYYYYYY
640435 YYYYYYYYYYYYYYYYY
640472 YYYNYYYYYYNYYYYYY
640473 YYYNYYYYYYNYYYYYY
640474 YYYNYYYYYYNYYYYYY
640475 YYYNYYYYYYNYYYYYY
640476 YYYNYYYYYYNYYYYYY
640477 YYYYYYYYYYYYYYYYY
640478 YYYYYYYYYYYYYYYYY
640479 YYYYYYYYYYYYYYYYY
640480 YYYYYYYYYYYYYYYYY
640481 YYYYYYYYYYYYYYYYY
640595 YYYNYYYYYYNYYYYYY
640599 YYYNYYYYYYNYYYYYY
640600 YYYNYYYYYYNYYYYYY
640601 YYYNYYYYYYNYYYYYY
640602 YYYNYYYYYYNYYYYYY
640604 YYYYYYYYYYYYYYYYY
640605 YYYYYYYYYYYYYYYYY
640606 YYYYYYYYYYYYYYYYY
640607 YYYYYYYYYYYYYYYYY
640608 YYYYYYYYYYYYYYYYY
641301 YYYNYYYYYYNYYYYYY
641302 YYYNYYYYYYNYYYYYY
641303 YYYNYYYYYYNYYYYYY
641304 YYYNYYYYYYNYYYYYY
641305 YYYNYYYYYYNYYYYYY
641306 YYYYYYYYYYYYYYYYY
641307 YYYYYYYYYYYYYYYYY
641308 YYYYYYYYYYYYYYYYY
641309 YYYYYYYYYYYYYYYYY
641310 YYYYYYYYYYYYYYYYY
643817 YYYNYYYYYYNYYYYYY
643818 YYYNYYYYYYNYYYYYY
643819 YYYNYYYYYYNYYYYYY
643820 YYYNYYYYYYNYYYYYY
643821 YYYNYYYYYYNYYYYYY
644082 YYYYYYYYYYYYYYYYY
644461 YYYYYYYYYYYYYYYYY
644462 YYYYYYYYYYYYYYYYY
644463 YYYYYYYYYYYYYYYYY
644464 YYYYYYYYYYYYYYYYY
644465 YYYNYYYYYYNYYYYYY
644466 YYYNYYYYYYNYYYYYY
644467 YYYNYYYYYYNYYYYYY
644468 YYYNYYYYYYNYYYYYY
644469 YYYYYYYYYYYYYYYYY
644470 YYYYYYYYYYYYYYYYY
644471 YYYYYYYYYYYYYYYYY
644472 YYYYYYYYYYYYYYYYY
644501 YYYYYYYYYYYYYYYYY
644502 YYYYYYYYYYYYYYYYY
644566 YYYYYYYYYYYYYYYYY
644567 YYYYYYYYYYYYYYYYY
644569 YYYYYYYYYYYYYYYYY
644570 YYYYYYYYYYYYYYYYY
644572 YYYYYYYYYYYYYYYYY
644783 YYYNYYYYYYNYYYYYY
644791 YYYYYYYYYYYYYYYYY
644860 YYYNYYYYYYNYYYYYY
644878 YYYNYYYYYYNYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYYYYYYYYYY
YYYNYYYYYYYY
YYYYYYYYYYYY
YYYNYYYYYYYY
YYYNYYYYYYYY
640383
640384
640385
640387
640388
640389
640445
644611
644612
644613
644614
644615
644616
644617
644749
644750
644751
644752
644753
644754
644755
647123
647124
647125
647126
647127
647128
647129
647130
647210
647211
647212
647227
647228
647229
647230
647646
647648
1744017
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YNYYYNYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YNYYYNYYY
Y YYYYYYYYY
Y YNYYYNYYY
Y YNYYYNYYY
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
35
MTA-156
.156 [3.96]
644763
This matrix has been prepared to assist you, our customer, in defining the correct mating
halves for the MTA-156 header and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not
acceptable for mating.
Headers
641202
641203
641204
641207
641208
641209
641210
644627
644628
644629
644630
644631
644632
644633
644756
644757
644758
644759
644760
644761
644762
647131
647132
647133
647134
647135
647136
641217 YYYNYYYYYYNYYYYYY
641218 YYYNYYYYYYNYYYYYY
641219 YYYNYYYYYYNYYYYYY
641220 YYYNYYYYYYNYYYYYY
641221 YYYNYYYYYYNYYYYYY
641222 YYYYYYYYYYYYYYYYY
641223 YYYYYYYYYYYYYYYYY
641224 YYYYYYYYYYYYYYYYY
641225 YYYYYYYYYYYYYYYYY
641226 YYYYYYYYYYYYYYYYY
641227 YYYNYYYYYYNYYYYYY
641228 YYYNYYYYYYNYYYYYY
641229 YYYNYYYYYYNYYYYYY
641230 YYYNYYYYYYNYYYYYY
641231 YYYNYYYYYYNYYYYYY
641232 YYYYYYYYYYYYYYYYY
641233 YYYYYYYYYYYYYYYYY
641234 YYYYYYYYYYYYYYYYY
641235 YYYYYYYYYYYYYYYYY
641236 YYYYYYYYYYYYYYYYY
644460 YYYNYYYYYYNYYYYYY
644662 YYYNYYYYYYNYYYYYY
644663 YYYNYYYYYYNYYYYYY
644687 YYYYYYYYYYYYYYYYY
644718 YYYNYYYYYYNYYYYYY
644720 YYYNYYYYYYNYYYYYY
Connectors
Headers
641113
641114
641115
641118
641119
641120
641121
644764
644765
644766
644767
644768
644769
647139
647140
647141
647142
647143
647144
647649
Connectors
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
YYYNYYYYYY
YYYNYYYYYY
YYYNYYYYYY
YYYNYYYYYY
YYYNYYYYYY
YYYYYYYYYY
YYYYYYYYYY
YYYYYYYYYY
YYYYYYYYYY
Y YYYYYYYYY
Y YYNYYYYYY
Y YYNYYYYYY
Y YYNYYYYYY
Y YYNYYYYYY
Y YYNYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYYYYYYYY
Y YYNYYYYYY
Y YYNYYYYYY
Y YYNYYYYYY
Y YYYYYYYYY
Y YYNYYYYYY
Y YYNYYYYYY
641148 YYYNYYYYYYYYYNYYYYYYY
641149 YYYNYYYYYYYYYNYYYYYYY
641150 YYYNYYYYYYYYYNYYYYYYY
641151 YYYNYYYYYYYYYNYYYYYYY
641152 YYYNYYYYYYYYYNYYYYYYY
641153 YYYYYYYYYYYYYYYYYYYYY
641154 YYYYYYYYYYYYYYYYYYYYY
641155 YYYYYYYYYYYYYYYYYYYYY
641156 YYYYYYYYYYYYYYYYYYYYY
641157 YYYYYYYYYYYYYYYYYYYYY
641168 YYYNYYYYYYYYYNYYYYYYY
641169 YYYNYYYYYYYYYNYYYYYYY
641170 YYYNYYYYYYYYYNYYYYYYY
641171 YYYNYYYYYYYYYNYYYYYYY
641172 YYYNYYYYYYYYYNYYYYYYY
641173 YYYYYYYYYYYYYYYYYYYYY
641174 YYYYYYYYYYYYYYYYYYYYY
641175 YYYYYYYYYYYYYYYYYYYYY
641176 YYYYYYYYYYYYYYYYYYYYY
641177 YYYYYYYYYYYYYYYYYYYYY
644284 YYYNYYYYYYYYYNYYYYYYY
647478 YYYNYYYYYYYYYNYYYYYYY
647479 YYYNYYYYYYYYYNYYYYYYY
647496 YYYYYYYYYYYYYYYYYYYYY
MTA-156 Connector/Header Mateability Guide (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
36
MTA-156
.156 [3.96]
Material and Finish
Housing — UL94V-2 rated, nylon,
see below for color; or UL94V-0 rated,
nylon, black
Contacts — Phosphor bronze, post tin
plated, .000030 [0.00076] or .000015
[.00038] post gold plated over nickel
Closed End with Locking Ramp
Closed End without Locking Ramp
without Polarizing Tabs
with Polarizing Tabs
without Polarizing Tabs
with Polarizing Tabs
Color Coding by Wire Size for
UL94V-2 Connectors
26 AWG — Blue
24 AWG — White
22 AWG — Red
20 AWG — Yellow
18 AWG — Orange
All Wire Sizes in UL94V-0 —
Black
.725
[18.42]
.245
[6.22]
.100
[2.54]
.325
[8.26]
.355
[9.02]
.230
[5.84]
.156
[3.96] Typ.
A
.050
[1.27]
.097
[2.46]
.100
[2.54]
.258
[6.56]
.050
[1.27]
.725
[18.42]
.245
[6.22]
.325
[8.26]
.355
[9.02]
.180
[4.57]
.050
[1.27] .156
[3.96] Typ.
A
.047
[1.19]
.100
[2.54]
.258
[6.56]
.050
[1.27]
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Closed End Connectors with Locking Ramp, see pages 45 thru 48,
50, 52, and 53, (49 and 51 Front Bend Headers Only).
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Closed End Connectors without Locking Ramp, see pages 46 thru 53.
Notes:
1. Only connectors with locking
ramp and without polarizing tabs
mate with posted connectors on
page 45.
2. Refer to pages 70 thru 74 for
approved wire listing.
3. For strain reliefs and dust covers,
see pages 40 and 41.
4. For keying plugs and panel
mount end caps, see page 42.
5. Other circuit sizes are available
upon request. Minimums
may apply.
6. Connector circuits can be
molded closed for keying pur-
poses. Minimums may apply.
7. Where no part numbers appear
in the chart, parts can be made
available upon request.
Minimums may apply.
8. To determine connector overall
length (Dim. A), multiply .156 x
the number of circuits. Example:
.156 x 10 circuits equals 1.560
inches [39.62 mm].
MTA-156 IDC Connectors—Closed End
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
37
MTA-156
.156 [3.96]
Base Part Numbers
Closed End with Locking Ramp Closed End without Locking Ramp
Without Tabs With Tabs Without Tabs With Tabs
Connector Type
Connector Connector Connector Connector
& Wire Size Part RoHS Part RoHS Part RoHS Part RoHS
Nos. Equiv. Nos. Equiv. Nos. Equiv. Nos. Equiv.
Standard UL94V-2, Tin Plated
18 AWG 640426 32–54 643817 32–54 640431 32–54 644461132–44
0.8–0.9 mm2
20 AWG 640427 32–54 643818 32–54 640432 32–54 644462132–44
0.5–0.6 mm2
22 AWG 640428 32–54 643819 32–54 640433 32–54 644463132–44
0.3–0.4 mm2
24 AWG 640429 32–54 643820 32–54 640434 32–54 644464132–44
0.2 mm2
26 AWG 640430 32–54 643821 32–54 640435 32–54 ——
0.12–0.15 mm2
Tape Mounted on Reel UL94V-2, Tin Plated
18 AWG 640472 32–54 644878 32–54 640477 32–54 ——
0.8–0.9 mm2
20 AWG 640473 32–54 ——640478 32–54 ——
0.5–0.6 mm2
22 AWG 640474 32–54 644783 32–54 640479 32–54 644791132–44
0.3–0.4 mm2
24 AWG 640475 32–54 ——640480 32–54 ——
0.2 mm2
26 AWG 640476 32–54 ——640481 32–54 ——
0.12–0.15 mm2
Standard UL94V-2, .000030 [0.00076] Gold Plated
18 AWG 641217 32–54 644460132–42 641222 32–54 ——
0.8–0.9 mm2
20 AWG 641218 32–54 644663132–42 641223 32–54 ——
0.5–0.6 mm2
22 AWG 641219 32–54 644662132–42 641224 32–54 644687132–44
0.3–0.4 mm2
24 AWG 641220 32–54 ——641225 32–54 ——
0.2 mm2
26 AWG 641221 32–54 ——641226 32–54 ——
0.12–0.15 mm2
Standard UL94V-2, .000015 [0.00038] Gold Plated
18 AWG 641148 32–54 644284132–42 641153 32–54 ——
0.8–0.9 mm2
20 AWG 641149 32–54 ——641154 32–54 ——
0.5–0.6 mm2
22 AWG 641150 32–54 647478132–42 641155 32–54 ——
0.3–0.4 mm2
24 AWG 641151 32–54 ——641156 32–54 ——
0.2 mm2
26 AWG 641152 32–54 ——641157 32–54 ——
0.12–0.15 mm2
Standard UL94V-0, Tin Plated (Black in color)
18 AWG 644860132–42 ——644502132–42 644082132–42
0.8–0.9 mm2
22 AWG ————644501132–42 644566132–42
0.3–0.4 mm2
1Other circuit sizes are available upon request. Minimums may apply.
Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for
details. Minimums may apply.
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described connec-
tors.
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position closed end con-
nector with locking ramp
and without polarizing tabs
for 18 AWG wire would be:
Base number 640426 plus
prefix-and-suffix
4- —-0
The correct ordering number
is
4-640426-0
All part numbers in bold face
are the RoHS equivalent
version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-640426-2
3 3-640426-3
4 3-640426-4
5 3-640426-5
6 3-640426-6
7 3-640426-7
8 3-640426-8
9 3-640426-9
10 4-640426-0
11 4-640426-1
12 4-640426-2
13 4-640426-3
14 4-640426-4
15 4-640426-5
16 4-640426-6
17 4-640426-7
18 4-640426-8
19 4-640426-9
20 5-640426-0
21 5-640426-1
22 5-640426-2
23 5-640426-3
24 5-640426-4
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
MTA-156 IDC Connectors—Closed End (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
38
MTA-156
.156 [3.96]
Material and Finish
Housing — UL94V-2 rated, nylon,
see below for color; or UL94V-0 rated,
nylon, black
Contacts — Phosphor bronze; post tin
plated, .000030 [.00076] or .000015
[.00038] post gold plated over nickel
Feed-Thru with Locking Ramp
Feed-Thru without Locking Ramp
without Polarizing Tabs
with Polarizing Tabs
without Polarizing Tabs
with Polarizing Tabs
.725
[18.42]
.245
[6.22]
.325
[8.26]
.385
[9.78] .180
[4.57]
.156
[3.96] Typ.
A
.050
[1.27]
.047
[1.19]
.258
[6.56]
.050
[1.27]
.100
[2.54]
.725
[18.42]
.245
[6.22]
.100
[2.54]
.325
[8.26]
.385
[9.78]
.230
[5.84]
.156
[3.96] Typ.
A
.050
[1.27]
.097
[2.46]
.100
[2.54]
.258
[6.56]
.050
[1.27]
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Feed–Thru Connectors with Locking Ramp, see pages 45 thru 48,
50, 52, and 53, (49 and 51 Front Bend Headers Only).
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Feed–Thru Connectors without Locking Ramp, see pages 46 thru 53.
Color Coding by Wire Size for
UL94V-2 Connectors
26 AWG — Blue
24 AWG — White
22 AWG — Red
20 AWG — Yellow
18 AWG — Orange
All Wire Sizes in UL94V-0 —
Black
Notes:
1. Only connectors with locking
ramp and without polarizing tabs
mate with posted connectors on
page 45.
2. Refer to pages 70 thru 74 for
approved wire listing.
3. For strain reliefs and dust covers,
see pages 40 and 41.
4. For keying plugs and panel
mount end caps, see page 42.
5. Other circuit sizes are available
upon request. Minimums
may apply.
6. Connector circuits can be
molded closed for keying pur-
poses. Minimums may apply.
7. Where no part numbers appear
in the chart, parts can be made
available upon request.
Minimums may apply.
8. To determine connector overall
length (Dim. A), multiply .156 x
the number of circuits. Example:
.156 x 10 circuits equals 1.560
inches [39.62 mm].
MTA-156 IDC Connectors—Feed-Thru
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
39
MTA-156
.156 [3.96]
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the
base part number and num-
ber of circuits available for
the described connectors.
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position feed-thru con-
nector with locking ramp
and without polarizing tabs
for 18 AWG wire would be:
Base number 640599 plus
prefix-and-suffix
4- —-0
The correct ordering number
is
4-640599-0
The part numbers in bold
face are the RoHS equiva-
lent version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-640599-2
3 3-640599-3
4 3-640599-4
5 3-640599-5
6 3-640599-6
7 3-640599-7
8 3-640599-8
9 3-640599-9
10 4-640599-0
11 4-640599-1
12 4-640599-2
13 4-640599-3
14 4-640599-4
15 4-640599-5
16 4-640599-6
17 4-640599-7
18 4-640599-8
19 4-640599-9
20 5-640599-0
21 5-640599-1
22 5-640599-2
23 5-640599-3
24 5-640599-4
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Base Part Numbers
Feed-Thru with Locking Ramp Feed-Thru without Locking Ramp
Without Tabs With Tabs Without Tabs With Tabs
Connector Type
Connector Connector Connector Connector
& Wire Size Part RoHS Part RoHS Part RoHS Part RoHS
Nos. Equiv. Nos. Equiv. Nos. Equiv. Nos. Equiv.
Standard UL94V-2, Tin Plated
18 AWG 640599 32–54 644465132–44 640604 32–54 644469132–44
0.8–0.9 mm2
20 AWG 640600 32–54 644466132–44 640605 32–54 644470132–44
0.5–0.6 mm2
22 AWG 640601 32–54 644467132–44 640606 32–54 644471132–44
0.3–0.4 mm2
24 AWG 640602 32–54 644468132–44 640607 32–54 644472132–44
0.2 mm2
26 AWG 640595 32–54 ——640608 32–54 ——
0.12–0.15 mm2
Tape Mounted on Reel UL94V-2, Tin Plated
18 AWG 641302 32–54 ——641306 32–54 ——
0.8–0.9 mm2
20 AWG 641303 32–54 ——641307 32–54 ——
0.5–0.6 mm2
22 AWG 641304 32–54 ——641308 32–54 ——
0.3–0.4 mm2
24 AWG 641305 32–54 ——641309 32–54 ——
0.2 mm2
26 AWG 641301 32–54 ——641310 32–54 ——
0.12–0.15 mm2
Standard UL94V-2, .00003 [.00076] Gold Plated
18 AWG 641227 32–54 644718132–44 641232 32–54 ——
0.8–0.9 mm2
20 AWG 641228 32–54 ——641233 32–54 ——
0.5–0.6 mm2
22 AWG 641229 32–54 644720132–44 641234 32–54 ——
0.3–0.4 mm2
24 AWG 641230 32–54 ——641235 32–54 ——
0.2 mm2
26 AWG 641231 32–54 ——641236 32–54 ——
0.12–0.15 mm2
Standard UL94V-2, .000015 [.00038] Gold Plated
18 AWG 641168 32–54 647479132–42 641173 32–54 ——
0.8–0.9 mm2
20 AWG 641169 32–54 ——641174 32–54 ——
0.5–0.6 mm2
22 AWG 641170 32–54 647496132–42 641175 32–54 ——
0.3–0.4 mm2
24 AWG 641171 32–54 ——641176 32–54 ——
0.2 mm2
26 AWG 641172 32–54 ——641177 32–54 ——
0.12–0.15 mm2
Standard UL94V-0, Tin Plated
18 AWG ————644567132–42 644570132–42
0.8–0.9 mm2
22 AWG ————644569132–42 644572132–42
0.3–0.4 mm2
1Other circuit sizes are available upon request. Minimums may apply.
Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for
details. Minimums may apply.
MTA-156 IDC Connectors—Feed-Thru (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
40
MTA-156
.156 [3.96]
A
.130
[3.30]
.105
[2.67]
.440
[11.18]
.335
[8.51]
Retention Dimple
.127
[3.23]
.440
[11.18]
Note: This portion of front locking bar
may or may not be present
A
.335
[8.51]
Closed End Covers
Material (RoHS Compliant)
Strain Relief Covers — UL94V-2
rated, nylon, white
Dust Covers — UL94V-0 rated,
polyester, white
Strain Relief Covers Dust Covers
Base Part Numbers
Closed End
Strain Relief Dust
Covers Covers
Cover No. of Cover No. of
Part Nos. Circuits Part Nos. Circuits
643067 2–24 640551 2–24
Cover Length
No. of Dim. Prefix/
Circuits A Suffix
2.312 -2
7.92
3.468 -3
11.89
4.624 -4
15.85
5.780 -5
19.81
6.936 -6
23.77
71.092 -7
27.74
81.248 -8
31.7
91.404 -9
35.66
10 1.560 1- -0
39.62
11 1.716 1- -1
43.59
12 1.872 1- -2
47.55
13 2.028 1- -3
51.51
14 2.184 1- -4
55.47
15 2.340 1- -5
59.44
16 2.496 1- -6
63.4
17 2.652 1- -7
67.36
No. of Dim. Prefix/
Circuits A Suffix
No. of Dim. Prefix/
Circuits A Suffix
18 2.808 1- -8
71.32
19 2.964 1- -9
75.29
20 3.120 2- -0
79.25
21 3.276 2- -1
83.21
22 3.432 2- -2
87.17
23 3.588 2- -3
91.14
24 3.744 2- -4
95.1
Cover Ordering Information
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for a
10-position closed-end
strain relief cover would be:
Base number 643067 plus
prefix-and-suffix
1- —-0
The correct ordering number
is
1-643067-0
Feed-Thru Covers
Material (RoHS Compliant)
Strain Relief Covers — UL94V-2
rated, nylon, white
Dust Covers — UL94V-0 rated,
polyester, white
Strain Relief Covers Dust Covers
.127
[3.23]
.470
[11.94]
Note: This portion of front locking bar
may or may not be present
A
A
.325
[8.26]
.475
[12.07]
.130
[3.3]
Retention Dimple
Base Part Numbers
Feed-Thru
Strain Relief Dust
Covers Covers
Cover No. of Cover No. of
Part Nos. Circuits Part Nos. Circuits
643071 2–24 640643 2–24
MTA-156 Connector Accessories
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
41
MTA-156
.156 [3.96]
Crimp Snap-in Contacts
Material and Finish
Contacts — Phosphor bronze,
tin plated
.110
[2.79]
.105
[2.67]
.580
[14.73]
.165
[4.19]Max.
Wire Size Part Nos.
AWG mm2Loose Piece* Strip**
26–22 .12–0.3 640557-3 640556-3
22–18 0.3–0.9 640559-3 640558-3
**Hand Tool No. 59837-1 (408-6528)
**AMP-O-LECTRIC Model “G” Termination
Machine (Request Catalog 65828)
Note: Requires applicator. For part number,
call Technical Support.
Special applications for crimp snap-in contacts are:
1. Double wire per contact
2. Coax or shielded wire
3. Mixed wire size in same connector
Note: Only one crimp snap-in contact per connector.
Wire Size Part Numbers
AWG mm2Tin Plated .000030 [0.00076] .000015 [0.00038]
Gold Plated Gold Plated
18 0.8–0.9 640631-3 641143-4 641143-3
20 0.5–0.6 640632–3 641144-4 641144-3
22 0.3–0.4 640633-3 641145-4 641145-3
24 0.2 640634-3 641146-4 641146-3
26 0.12–0.15 640635-3 641147-4 641147-3
Replacement IDC Contacts
Material and Finish
Contacts — Phosphor bronze, post tin
plated; .000030 [0.00076] or .000015
[0.00038] post gold plated over nickel
Note: Tyco Electronics does not rec-
ommend terminating an MTA
contact more than one time.
Use replacement contacts
when required for field repairs
or wire changes.
.637
[16.18]
.125
[3.18]
MTA-156 Connector Accessories (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
42
MTA-156
.156 [3.96]
.375
[9.52]
.300
[7.62]
.065
[1.65]
.051
[1.30]
.066
[1.68]
.070
[1.78] Dia.
.300
[7.62]
.085
[2.16]
.065
[1.65]
.051
[1.30]
.066
[1.68]
.453
[11.5]
.578
[14.7]
.010
[.254]
Max. R. Typ. at Min.
Tolerance Cutout
Keying Plugs
Material (RoHS Compliant)
UL94V-2 rated, nylon, natural color
Note: Removal of contact is not
necessary when using keying plug.
Loose Piece
Part No. 640629-1 (Flush)
Used with keyed headers
On Carrier Strip
Part No. 641623-1 (Flush)
(10 per strip)
Long Nose
Flush
.125
[3.18]
.500
[12.70]
Ref.
2.525
[64.14]
Ref.
.300
[7.62]
Ref.
Panel Mount End Caps
Part No. 641440-1
Part No. 641533-1
(2-position only)
Material (RoHS Compliant)
UL94V-2 rated, nylon, black
Notes:
1. Both left-hand and right-hand
end caps are attached by a con-
necting tab. This tab must be
broken off prior to installing on
connector.
2. For best results attach panel
mount end caps to the MTA-156
(IDC) connectors shown on pages
36 thru 39. While not preferred,
panel mount end caps can be
attached to MTA-156 (IDC)
posted connector on page 45.
.440
[11.18]
.520
[13.2]
.410
[10.41]
.550
[13.97]
Two-Position Only
641533-1
3- thru 24-Position
641440-1
See Note 1
.453
[11.5]
A
.010
[.254]
Max. R. Typ.
at Min.
Tolerance
Cutout
No. of Dim.
Pos. A
3.736
18.69
4.892
22.66
61.204
30.58
91.672
42.47
12 2.140
54.36
15 2.608
66.24
24 4.012
101.9 Recommended Panel Cutout
(Recommended Panel Thickness .062 [1.57] to .067 [1.70] max.)
.564
[14.33]
.520
[13.2]
.440
[11.18]
Part No. 640630-1 (Long Nose)
Used with staked post
MTA-156 Connector Accessories (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
43
MTA-156
.156 [3.96]
MTA-156 Posted
Connector/Connector
Mateability Guide
Posted
Connectors
Connectors
640426 YYYYYYYYYY
640427 YYYYYYYYYY
640428 YYYYYYYYYY
640429 YYYYYYYYYY
640430 YYYYYYYYYY
640431 NNNNNNNNNN
640432 NNNNNNNNNN
640433 NNNNNNNNNN
640434 NNNNNNNNNN
640435 NNNNNNNNNN
640472 YYYYYYYYYY
640473 YYYYYYYYYY
640474 YYYYYYYYYY
640475 YYYYYYYYYY
640476 YYYYYYYYYY
640477 NNNNNNNNNN
640478 NNNNNNNNNN
640479 NNNNNNNNNN
640480 NNNNNNNNNN
640481 NNNNNNNNNN
640595 YYYYYYYYYY
640599 YYYYYYYYYY
640600 YYYYYYYYYY
640601 YYYYYYYYYY
640602 YYYYYYYYYY
640604 NNNNNNNNNN
640605 NNNNNNNNNN
640606 NNNNNNNNNN
640607 NNNNNNNNNN
640608 NNNNNNNNNN
641301 YYYYYYYYYY
641302 YYYYYYYYYY
641303 YYYYYYYYYY
641304 YYYYYYYYYY
641305 YYYYYYYYYY
641306 NNNNNNNNNN
641307 NNNNNNNNNN
641308 NNNNNNNNNN
641309 NNNNNNNNNN
641310 NNNNNNNNNN
643817 NNNNNNNNNN
643818 NNNNNNNNNN
643819 NNNNNNNNNN
643820 NNNNNNNNNN
643821 NNNNNNNNNN
644082 NNNNNNNNNN
644461 NNNNNNNNNN
644462 NNNNNNNNNN
644463 NNNNNNNNNN
644464 NNNNNNNNNN
644465 NNNNNNNNNN
644466 NNNNNNNNNN
644467 NNNNNNNNNN
644468 NNNNNNNNNN
644469 NNNNNNNNNN
644470 NNNNNNNNNN
644471 NNNNNNNNNN
644472 NNNNNNNNNN
644501 NNNNNNNNNN
644502 NNNNNNNNNN
644566 NNNNNNNNNN
644567 NNNNNNNNNN
644569 NNNNNNNNNN
644570 NNNNNNNNNN
644572 NNNNNNNNNN
644783 NNNNNNNNNN
644791 NNNNNNNNNN
644860 YYYYYYYYYY
644878 NNNNNNNNNN
641435
641436
641437
641438
641439
641522
641523
641524
641525
641526
Matrix for Tin Plated
Part Numbers
This matrix has been pre-
pared to assist you, our
customer, in defining the
correct mating halves for
the MTA-156 posted con-
nector and connector com-
bination. Where a “Y” is
indicated the combination
is a valid mating pair.
Where an “N” is indicated
the combination is not
acceptable for mating.
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
44
MTA-156
.156 [3.96]
This matrix has been prepared to assist you, our customer, in defining the correct mating
halves for the MTA-156 posted connector and connector combination. Where a “Y” is indi-
cated the combination is a valid mating pair. Where an “N” is indicated the combination is
not acceptable for mating.
Posted Connectors
Posted Connectors
644807
644809
644812
644814
641217 YYYY
641218 YYYY
641219 YYYY
641220 YYYY
641221 YYYY
641222 NNNN
641223 NNNN
641224 NNNN
641225 NNNN
641226 NNNN
641227 YYYY
641228 YYYY
641229 YYYY
641230 YYYY
641231 YYYY
641232 NNNN
641233 NNNN
641234 NNNN
641235 NNNN
641236 NNNN
644460 NNNN
644662 NNNN
644663 NNNN
644687 NNNN
644718 NNNN
644720 NNNN
Connectors
643995
647476
647481
647497
Connectors
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
641148 YYYY
641149 YYYY
641150 YYYY
641151 YYYY
641152 YYYY
641153 NNNN
641154 NNNN
641155 NNNN
641156 NNNN
641157 NNNN
641168 YYYY
641169 YYYY
641170 YYYY
641171 YYYY
641172 YYYY
641173 NNNN
641174 NNNN
641175 NNNN
641176 NNNN
641177 NNNN
644284 NNNN
647478 NNNN
647479 NNNN
647496 NNNN
MTA-156 Posted Connector/Connector Mateability Guide (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
45
MTA-156
.156 [3.96]
Closed End Feed-Thru
.840
[21.34]
.126
[3.20]
.100
[2.54]
.045
[1.14]
Sq.
91.560 1.408 -9
39.62 35.76
12 2.028 1.876 1- -2
51.51 47.65
15 2.496 2.344 1- -5
63.40 59.54
24 3.900 3.748 2- -4
99.06 95.20
No. of Dim. Prefix/
Circuits AB
Suffix
1234
ADim.
.045
[1.14] Sq.
.370
[9.4]
.105
[2.67]
.355
[9.02]
.487
[12.37]
Ref.
1.010
[25.65]
B
Dim.
.156
[3.96]
[ ]
± .010
± 0.25
ADim.
.045
[1.14] Sq.
.370
[9.4]
.105
[2.67]
.385
[9.78]
.487
[12.37]
Ref.
1.010
[25.65]
B
Dim.
p
.156
[3.96]
[ ]
± .010
± 0.25
Performance Data
Voltage Rating — 600 VAC
Current Rating — 7 amp max.
Low-Level Resistance —
7 m⍀max. initial
Dielectric Withstanding Voltage —
1500 VAC/1 min.
Insulation Resistance —
5000 M⍀min. initial
Operating Temperature —
-55⬚Cto⫹105⬚C
Wire Size Part
AWG mm2Numbers
18 0.8-0.9 3-641425-1
20 0.5-0.6 3-641426-1
22 0.3-0.4 3-641427-1
24 0.2 3-641428-1
26 0.12-0.15 3-641429-1
Technical Documents
Product Specification
108-1065 MTA-156 Posted
Connector
Application Specification
114-1020 MTA-156 Connectors,
Posted Connectors and
Card Edge Connectors
Replacement IDC Contacts
Material and Finish
Contacts — Copper alloy, post tin
plated over nickel
Base Part Numbers
Connector Type Closed End Connector1Feed-Thru Connector1
& Wire Size Part Nos. RoHS Equiv. Part Nos. RoHS Equiv.
Standard UL 94V-2, Tin Plated
18 AWG 641435 32, 33, 34, 36, 39, 42, 45, 54 641522 32, 33, 34, 36, 39, 42, 45, 54
0.8-0.9 mm2
20 AWG 641436 32, 33, 34, 36, 39, 42, 45, 54 641523 32, 33, 34, 36, 39, 42, 45, 54
0.5-0.6 mm2
22 AWG 641437 32, 33, 34, 36, 39, 42, 45, 54 641524 32, 33, 34, 36, 39, 42, 45, 54
0.3-0.4 mm2
24 AWG 641438 32, 33, 34, 36, 39, 42, 45, 54 641525 32, 33, 34, 36, 39, 42, 45, 54
0.2 mm2
26 AWG 641439 32, 33, 34, 36, 39, 42, 45, 54 641526 32, 33, 34, 36, 39, 42, 45, 54
0.12-0.15 mm2
Standard UL 94V-2, .000030 [0.00076] Gold Plated
18 AWG 644807 32, 33, 34, 36, 39, 42, 45, 54 644812 32, 33, 34, 36, 39, 42, 45, 54
0.8-0.9 mm2
20 AWG —2——
2—
0.5-0.6 mm2
22 AWG 644809 32, 33, 34, 36, 39, 42, 45, 54 644814 32, 33, 34, 36, 39, 42, 45, 54
0.3-0.4 mm2
24 AWG —2——
2—
0.2 mm2
26 AWG —2——
2—
0.12-0.15 mm2
Standard UL 94V-2, .000015 [0.00038] Gold Plated
18 AWG 647476 32, 33, 34, 36, 39, 42, 45, 54 647481 32, 33, 34, 36, 39, 42, 45, 54
0.8-0.9 mm2
22 AWG 643995 32, 33, 34, 36, 39, 42, 45, 54 647497 32, 33, 34, 36, 39, 42, 45, 54
0.3-0.4 mm2
1MTA-156 Posted Connectors (Closed End and Feed-Thru) will Only mate with MTA-156 connectors with locking
ramp and without polarizing tabs. They will NOT mate with MTA-156 Quad Connectors.
2Parts can be made available upon request. Minimums may apply.
No. of Dim.
Circuits AB
Suffix
2.468 .316 -2
11.89 8.03
3.624 .472 -3
15.85 11.99
4.780 .628 -4
19.81 15.95
61.092 .940 -6
27.74 23.88
Material and Finish
Housing — UL 94V-2 rated, nylon,
see chart for color
Contacts — Copper alloy, post tin or
.000030 [.00076] gold plated over
nickel
Notes:
1. Mating half visuals - pages 36 thru 39.
2. Strain relief & dust covers - pages 40
& 41.
3. Approved wire listing - page 70.
Connector Ordering
Information
The “Base Part Numbers” Chart
at right shows the base part
number and number of circuits
available for the described
connectors.
Prefixes and suffixes are deter-
mined by the number of circuit
positions in the connector. For
example, the complete part
number for a 12-position
closed end connector for
18 AWG wire would be:
Base number 641435 plus
prefix-and-suffix
4- —-2
The correct ordering number is
4-641435-2
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Color Coding by Wire Size
for UL 94V-2 Connectors
18 AWG —Orange
20 AWG — Yellow
22 AWG — Red
24 AWG — White
26 AWG — Blue
MTA-156 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
46
MTA-156
.156 [3.96]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.36-
3.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, see
pages 36 thru 39, 55, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
Base number 640383 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-640383-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-640383–2
thru
24 5-640383-4
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
.250
[6.35]
A
.045
[1.14]
.156
[3.96]
Typ.
.078
[1.98]
Typ.
.450
[11.43]
.125
[3.18]
Solder tail
Length
(See Chart)
.156
[3.96]
Edge of Board
.140
[3.56] Min.
.125
[3.18]
Post No. 1 Ref.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Base Part Numbers
Square Posts Round Posts
.125 [3.18] .175 [4.45] .125 [3.18] .175 [4.45]
Solder tail Solder tail Solder tail Solder tail
Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
640383 2–24 644749 2–24 640384 2–24 644750 2–24
Standard UL94V-0, .000030 [0.00076] Gold Plated
641202 32–54 644756 32–54 641203 32–54 644757 32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
641113 32–54 644763 32–54 641114 32–54 644764 32–54
PC Board Hole Diameters
Square Round
Post Post
.080/.070 .070/.060
[2.03/1.78] [1.78/1.52]
PC Board Hole Diameters
Square Round
Post Post
.080/.070 .070/.060
[2.03/1.78] [1.78/1.52]
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
MTA-156 Flat Headers—Straight
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
47
MTA-156
.156 [3.96]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.36-
3.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, see
pages 36 thru 39, 55, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
Base number 641204 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-641204-0
The part numbers in bold face
are the RoHS equivalent ver-
sion. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-641204–2
thru
24 5-641204-4
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
.125
[3.18]
A
A
.045
[1.14]
Sq.
.156
[3.96]
Typ.
.078
[1.98]
Typ.
.250
[6.35]
.156
[3.96]
.080/.070
[2.03/1.78]
Solder tail
Length
(See Chart)
.390
[9.91]
Edge of Board
X
Post No. 1
.125
[3.18]
.100
[2.54]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for .063 [1.60]
Thk. PC Board for Retentive Leg Header
Y= .140 [3.56] Min., .430 [10.92] Max. when mated with
MTA Connector.
Retentive Leg
X= .140 [3.56] Min., .430 [10.92] Max.
when mated with MTA Connector.
X= .140 [3.56] Min. when mated with
SL-156 Wire-to-Board Connector.
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Base Part Numbers
Square Posts
Retentive Leg .125 [3.18] Solder tail .175 [4.45] Solder tail
Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647646 2–12 640385 2–24 644751 2–24
Standard UL94V-0, .000030 [0.00076] Gold Plated
—— 641204 32–54 644758 32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
—— 641115 32–54 644765 32–54
.390 ±.015
[9.91 ±0.38]
.125
[3.18] 16°
Edge of Board
.156
[3.96]
Y
Typ.
Ø.063±.002
[1.60±0.05]Typ.
MTA-156 Flat Headers—Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
48
MTA-156
.156 [3.96]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.36-
3.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
connectors with a locking ramp
for polarization/retention pur-
poses, see pages 36 thru 39,
55, 60 and 62.
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 55, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
Base number 641208 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-641208-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of Standard Lead Free
Pos. Prefix/Suffix RoHS
Prefix/Suffix
2 641208–2 3-641208–2
thru
24 2-641208-4 5-641208-4
See page 15 for an explanation of
RoHS lead free equivalents.
.156
[3.96]
.125
[3.18]
.450
[11.43]
Solder tail
Length
(See Chart)
.300
[7.62]
A
.156
[3.96]
.045
[1.14]
.180
[4.57]
.078
[1.98]
Post No. 1
.175
[4.45] Min. Edge of Board
Y
.425
[10.8]
Ref.
Typ.
Typ.
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Y= .068 [1.73] Max. 2-8
position tin plated and
2–24 position gold
plated headers.
Y= .073 [1.85] 9-24 position
tin plated headers.
PC Board Hole Diameters
Square Round
Post Post
.080/.070 .070/.060
[2.03/1.78] [1.78/1.52]
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not
available, please contact Product Engineering to expedite your request.
Note:
Select load headers (omitted pin headers) and tube loaded product are available upon request. Please contact product
engineer or product manager for details.
Base Part Numbers
Square Posts Round Posts
Retentive .125 [3.18] .175 [4.45] .125 [3.18] .175 [4.45]
Leg Solder tail Solder tail Solder tail Solder tail
Header RoHS Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
1744017 2-12 640445 2–24 644752 2–24 640388 2–24 644753 2–24
Standard UL94V-0, .000030 [0.00076] Gold Plated
——641208 32–54 644759 32–54 641209 32–54 644760 32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
——641119 32–54 644766 32–54 641120 32–54 644767 32–54
.068
[1.7]
.400
[10.16]
16° ±3°
Retentive Leg
MTA-156 Friction Lock Headers—Straight
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
49
MTA-156
.156 [3.96]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Gold headers are duplex plated, gold
on mating end of post and tin on the
solder tail.
3. .125 [3.18] solder tail lengths are for
.062 [1.57] thick printed circuit boards
and .175 [4.45] solder tail lengths are
for .093-.125 [2.36-3.18] thick printed
circuit boards.
4. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
When using Front Bend
Headers — for mating half
visuals use connectors with a
locking ramp for polarization/
retention purposes. When using
Rear Bend Headers — for mating
half visuals use connectors with-
out a locking ramp. For polariza-
tion purposes only see pages
36 thru 39, 55, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are
determined by the number
of post positions in the header.
For example, the complete part
number for a 10-position header
with square posts, front bend,
and a .125 [3.18] solder tail
length would be:
Base number 641210 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-641210-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of Standard Lead Free
Pos. Prefix/Suffix RoHS
Prefix/Suffix
2 641210–2 3-641210–2
thru
24 2-641210-4 5-641210-4
See page 15 for an explanation of
RoHS lead free equivalents.
.125
[3.18]
.450
[11.43]
.212
[5.38]
.425
[10.8]
.156
[3.96] Y
.045
[1.14]
Sq.
.180
[4.57]
A
.300
[7.62]
.078
[1.98]
Typ.
Typ.
.156
[3.96] .080/.070
[2.03/1.78]
Edge of Board
Post No. 1
X
Solder tail
Length
(See Chart)
.425
[10.8]
.157
[3.99]
Y
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Front Bend
X= .325 [8.26] Min., .400 [10.16]
Max., when mated with
MTA Connector.
X= .325 [8.26] Min., .345 [8.76]
Max., when mated with
SL-156 Connector.
Rear Bend
X= .500 [12.7] Min., .650 [16.51]
Max., when mated with
MTA Connector.
X= .500 [12.7] Min., when mated
with SL-156 Connector.
Y= .068 [1.73] Max. 2-8
position tin plated and
2–24 position gold
plated headers.
Y= .073 [1.85] 9-24 position
tin plated headers.
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Base Part Numbers
Square Posts
Front Bend Rear Bend
.125 [3.18] .175 [4.45] .125 [3.18] .175 [4.45]
Solder tail Solder tail Solder tail Solder tail
Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
640389 2–24 644754 2–24 640387 2–24 644755 2–24
Standard UL94V-0, .000030 [0.00076] Gold Plated
641210 32–54 644761 32–54 641207 32–54 644762 32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
641121 32–54 644768 32–54 641118 32–54 644769 32–54
MTA-156 Friction Lock Headers—Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
50
MTA-156
.156 [3.96]
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
.210
[5.33]
A
.125
[3.18]
.156
[3.96]
.076
[1.93]
.045
[1.14]
.425
[10.80]
.100
[2.54]
.125
[3.18]
.450
[11.43] .545
[13.84]
.073
[1.85]
.156
[3.96]
.066/.062
[1.68/1.57] Edge of Board
Dia.
.167
[4.24]
.225
[5.72] Min.
.078
[1.98]
90°Ref.
Typ. Retention Tabs
4 Plc.
Post No. 1
Polarized
Retention Peg
Typ.
Peg Hole
Polarized
Retention Peg
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated or
.000030 [0.00076] gold over nickel
Notes:
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Peg holes are not required in
PC Boards when headers without pegs
are used.
3. One peg only on a 2 position header,
other position sizes have two pegs.
4. Headers with .00015 [0.00038] gold
plated post are available upon request.
Minimums may apply.
5. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
connectors with a locking ramp
for polarization/retention pur-
poses, see pages 36 thru 39,
55, 60 and 62.
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with square posts with
pegs would be:
Base number 644615 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-644615-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-644615–2
thru
18 4-644615-8
See page 15 for an explanation of
RoHS lead free equivalents.
PC Board Hole Diameters
Square Round
Post Post
.069/.065 .054/.050
[1.75/1.65] [1.37/1.27]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base Part Numbers
Square Posts Round Posts
Without Pegs With Pegs Without Pegs With Pegs
Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
644611 32–48 644615 32–48 644612 32–48 644616 32–48
Standard UL94V-0, .000030 [0.00076] Gold Plated
644627 32–48 644631 32–48 644628 32–48 644632 32–48
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
MTA-156 Polarized Lock Headers—Straight
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
51
MTA-156
.156 [3.96]
Polarized
Retention Peg
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated or
.000030 [0.00076] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Peg holes are not required in PC
Boards when headers without
pegs are used.
3. One peg only on a 2 position
header, other position sizes have
two pegs.
4. Headers with .00015 [0.00038]
gold plated post are available
upon request. Minimums may
apply.
5. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
only connectors with a locking
ramp for polarization/retention
purposes, see pages 36 thru
39, 55, 60 and 62.
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with front bend and
with pegs would be:
Base number 644617 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-644617-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-644617–2
thru
18 4-644617-8
See page 15 for an explanation of
RoHS lead free equivalents.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
.125
[3.18]
.156
[3.96]
.076
[1.93]
Typ.
.045
[1.14]
.210
[5.33]
Typ.
Ref.
.450
[11.43] .545
[13.84]
.156
[3.96]
Edge of Board
Dia.
.239
[6.07]
Reg. Hole
.066/.062
[1.68/1.57]
.078
[1.98]
.069/.065
[1.75/1.65]
90°Ref.
Typ. Retention Tabs
4 Plc.
Post No. 1
A
.100
[2.54]
.425
[10.80]
Front Bend Rear Bend
.205
[5.21]
Typ.
.073
[1.85]
Typ.
.125
[3.18]
.200
[5.08]
Typ.
.125
[3.18]
x
Typ.
Sq.
Front Bend
X= .350 [8.89] Min., .825 [20.96]
Max., when mated with
MTA Connector.
X= .350 [8.89] Min. when mated
with SL-156 Connector.
Rear Bend
X= .500 [12.7] Min., .700 [17.78]
Max., when mated with
MTA Connector.
X= .500 [12.7] Min., when
mated with SL-156
Connector.
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Base Part Numbers
Square Posts
Front Bend Rear Bend
Without Pegs With Pegs Without Pegs
Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
644613 32–48 644617 32–48 644614 32–48
Standard UL94V-0, .000030 [0.00076] Gold Plated
644629 32–48 644633 32–48 644630 32–48
MTA-156 Polarized Lock Headers—Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
52
MTA-156
.156 [3.96]
Material and Finish
Housing —UL94V-0 rated, nylon, black
Posts — Copper alloy, tin plated,
.000015 [0.00038] gold over nickel
Temperature— Maximum
Temperature Rating: 280°C
Notes:
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Gold headers are duplex plated, gold
on mating end of post and tin-lead on
the solder tail.
3. Headers with straight and right-angle
square posts are available upon
request. Minimums may apply.
4. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
connectors with a locking ramp
for polarization/retention pur-
poses, see pages 36 thru 39,
55, 60 and 62.
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with round tin plated posts:
Base number 647648 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-647648-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of Lead Free
Pos. RoHS
Prefix/Suffix
2 3-647648–2
12 4-647648-2
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Recommended Mounting Hole Pattern
for .062 [1.57] Thick PC Board
Base Part Numbers
Round Post
Header RoHS
Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647648 32–42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647649 32–42
For use with Infrared Reflow Process
.650± .010
[16.51 ± 0.25]
Solder Paste Area
.057± .003
[1.45 ± 0.08]
Pretinned Plated
Thru Hole Typ.
.100
[2.54]
Pretinned Land
(Both Sides) Typ.
.008
[0.20]
Min. Thick Solder Paste
in Area Shown
.120 Typ.
[3.05]
.156 Typ.
[3.96]
.070 Typ.
[1.78]
Position No. 1
.120 Typ.
[3.05]
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Ø .045 ±.001
[1.14 ±0.03]
.076 ±.003
[1.93 ±0.08]
2 Plcs.
.210
[5.33]
.450
[11.43]
.125
[3.18]
Mating
End
Solder tail
Post No. 1
A
Ref.
.156
[3.96] Typ.
.425
[10.80]
.335
[8.51]
.700 ±.010
[17.78 ±0.25 ]
.125 ±.010
[3.18 ±0.25 ]
Ref.
Ref.
Typ.
+ .005
– .010
+0.13
–0.25
.073
[1.85 ]
.545 ±.010
[13.84 ±0.25 ]
Typ.
MTA-156 Friction Lock High Temperature Headers—Straight
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
53
MTA-156
.156 [3.96]
Material and Finish
Housing — UL94V-0 rated, polyester,
black
Posts — Copper alloy, tin plated; or
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Gold headers are duplex plated, gold
on mating end of post and tin on the
solder tail.
3. Peg holes are not required in PC boards
when headers without pegs are used.
4. One peg only on a 2 position header,
other position sizes have two pegs.
5. Right-angle front and rear bend headers
with retention pegs can be made avail-
able upon request. Minimums may apply.
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, see
pages 36 thru 39 and 55.
Header Ordering Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight, square
posts and with pegs would be:
Base number 647127 plus
prefix-and-suffix
4- —-0
The correct ordering number is
4-647127-0
No. of Dim. RoHS
Pos. A Prefix/
Suffix
2.406 2--2
10.31
3.562 2--3
14.27
4.718 2--4
18.24
5.874 2--5
22.20
61.030 2--6
26.16
71.186 2--7
30.12
81.342 2--8
34.09
91.498 2--9
38.05
10 1.654 3--0
42.01
11 1.810 3--1
45.97
12 1.966 3--2
49.94
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Straight Post (.045 [1.14] Square or Round) Right-Angle (.045 [1.14] Square)
A
.455
[11.56]
Polarized
Retention Peg
.125
[3.18]
.045
[1.14]
Post
No. 1
.156
[3.96]
.550
[13.97]
.525
[13.34]
.300
[7.62]
.125
[3.18]
.100
[2.54] .167
[4.24]
.210
[5.33]
.066/062
[1.68/1.58]
Dia.
.156
[3.96]
.078
[1.98]
.167
[4.24]
.245
[6.22]
Edge of Board
Min.
.066/062
[1.68/1.58]
Dia.
.156
[3.96]
.078
[1.98]
.239
[6.07]
.350/.700
[8.89/17.78]
.069/.065
[1.75/1.65]
Edge of Board
Dia.
Recommended Mounting Hole Pattern for .062 [1.57] Thick
PC Board Using a Straight Post Header
Recommended Mounting Hole Pattern for .062 [1.57] Thick
PC Board Using a Right-Angle Header
Front Bend
Rear Bend
Post
No. 1
.156
[3.96] Typ.
.045
[1.14]
.525
[13.34]
Ref.
.300
[7.62]
Ref.
.455
[11.56] .210
[5.33]
.205
[5.21]
.125
[3.18]
Post
No. 1
.156
[3.96] Typ.
.045
[1.14]
.525
[13.34]
Ref.
.300
[7.62]
Ref.
.455
[11.56] .210
[5.33]
.205
[5.21 ]
±.002
±0.05
.125
[3.18 ]
±.010
±0.25
PC Board Hole Diameters
Square Post Round Post
.069/.065 .054/.050
[1.75/1.65] [1.37/1.27]
Base Part Numbers
Straight Square Posts Straight Round Posts
Without Pegs With Pegs Without Pegs With Pegs
Header RoHS Header RoHS Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647123 22–32 647127 22–32 647124 22–32 647128 22–32
Standard UL94V-0, .000030 [0.00076] Gold Plated
647131 22–32 647135 22–32 647132 22–32 647136 22–32
Standard UL94V-0, .000015 [0.00038] Gold Plated
647139 22–32 647143 22–32 647140 22–32 647144 22–32
Square Posts
Right-Angle Posts, Front Bend Right-Angle Posts, Rear Bend
Without Pegs Without Pegs
Header RoHS Header RoHS
Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
647125 22–32 647126 22–32
Standard UL94V-0, .000030 [0.00076] Gold Plated
647133 22–32 647134 22–32
Standard UL94V-0, .000015 [0.00038] Gold Plated
647141 22–32 647142 22–32
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or prod-
uct manager for details.
Note: Consult Product Drawing for details
on placing headers onto PC boards.
MTA-156 Shrouded Headers—Straight and Right-Angle
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
54
MTA-156
.156 [3.96]
644329
644370
644371
644375
644376
644377
644381
644382
644383
644387
644388
644389
640389
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
640385
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
640383
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
640445
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644611
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644613
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Connectors
Headers
644615
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644617
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644749
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644751
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644752
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644754
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
647123
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
647125
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
647126
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
647127
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Product Facts
■Provides four points of
contact
■Greater current carrying
capability than Standard
MTA-156 Connectors
■Connector styles include
both closed end and feed-
thru with locking ramp, with
and without polarizing tabs
in 2 through 12 positions
■Available for wire ranges of
18 – 22 AWG [0.9– 0.3
mm✒]
■Contacts are lubricated for
fretting corrosion protection
■Complies with
Tyco Electronics Quality
Specification 102-6,
“Preparation of Design
Objectives”
■Uses existing MTA applica-
tion tooling for termination
■Quad connectors preloaded
with contacts
■All contacts are slotted for
insulation displacement
(IDC) termination technique
■Connectors and headers are
end-to-end stackable
■AWG size is “frosted” on
the side of the connector
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
■Satisfies the VDE require-
ments according to VDE
110, Insulation Group B,
250 vac for air and creep-
age paths
R
R
The MTA-156 Quad Con-
nector provides a connec-
tion with four points of
contact. The UL94V-0 rated
connector with multi-point
contacts provides greater
current carrying capability
than the Standard MTA-156
Connector. These connec-
tors comply with
Tyco Electronics Quality
Specification 102-6* and
satisfy the VDE requirements
according to VDE 110.
The connectors are avail-
able for wire ranges of
18 – 22 AWG [0.9– 0.3 mm2]
and in a variety of styles
including closed end and
feed-thru with locking ramp,
with and without polarizing
tabs.
Only one wire to be termin-
ated into an IDC contact
slot.
*The 102-6 Quality Specification is
the new procedure for “Preparation
of Design Objectives”. Its purpose is
to provide a means for verifying the
maximum current carrying capacity
of the device.
Note: Refer to pages 70 through 74
for approved wire listings.
The MTA-156 Quad Connectors
only mate with standard MTA-
156 square post headers and
use existing MTA application
tooling for termination.
Performance Data
Voltage Rating — 600 vac
Current Rating — 12.5 amp max. on a
single circuit.
For Multiple Circuit Loading —
refer to Product Specification for current
rating chart.
Low-Level Resistance —
3.0 m⍀max. initial
Dielectric Withstanding Voltage —
1500 vac/1 min.
Insulation Resistance —
5000 M⍀min. initial
Operating Temperature —
-55⬚Cto⫹105⬚C
Technical Documents
Product Specifications
108-1219 MTA-156 Quad Connector
System
Application Specifications
114-1048 MTA-156 Quad
Connector
This matrix has been prepared to assist you, our customer,
in defining the correct mating halves for the MTA-156
header and connector combination. Where a “Y” is indi-
cated the combination is a valid mating pair.
MTA-156 IDC Quad Connectors
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
55
MTA-156
.156 [3.96]
Closed End with Locking Ramp
without Polarizing Tabs with Polarizing Tabs
with Polarizing Tabs
.156
[3.96] Typ.
A.097
[2.46]
.100
[2.54]
.308
[7.82]
.725
[18.42]
.245
[6.22]
.100
[2.54]
.325
[8.26] .355
[9.02]
.280
[7.11]
.180
[4.57]
.230
[5.84]
.090
[2.29]
without Polarizing Tabs
.725
[18.42]
.245
[6.22]
.100
[2.54]
.325
[8.26]
.385
[9.78]
.230
[5.84]
.180
[4.57]
.090
[2.29]
.280
[7.11]
Feed-Thru with Locking Ramp
.156
[3.96] Typ.
A
.097
[2.46]
AWG
.100
[2.54]
.308
[7.82]
Base Part Numbers
Closed End with Locking Ramp Feed-Thru with Locking Ramp
Without Tabs With Tabs Without Tabs With Tabs
Connector Type
& Wire Size Connector RoHS Connector RoHS Connector RoHS Connector RoHS
Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv. Part Nos. Equiv.
Standard UL94V-0, Tin Plated
18 AWG 644329 32–42 644381 32–42 644375 32–42 644387 32–42
0.8-0.9 mm2
20 AWG 644370 32–42 644382 32–42 644376 32–42 644388 32–42
0.5-0.6 mm2
22 AWG 644371 32–42 644383 32–42 644377 32–42 644389 32–42
0.3-0.4 mm2
Material and Finish
Housing — UL94V-0 rated, nylon,
black
Contacts — High conductivity copper
alloy, post tin plated
For mateability options, see
matrix on page 54.
For strain relief and dust
covers, see pages 40
and 41.
For mating half visuals, see
pages 46 thru 48 and 50,
52 and 53, (49 and 51 Front
Bend Headers only). Mates
with tin-plated square posts
only.
Refer to pages 70 thru 74
for approved wire listing.
Note: To determine connector overall
length (Dim. A), multiply .156 x the
number of circuits. Example: .156 x
10 circuits equals 1.560 inches
[39.62 mm].
Note: Tyco Electronics does not rec-
ommend terminating an MTA contact
more than one time. Use replace-
ment contacts when required for
field repairs or wire gage changes.
Wire Size Part
AWG mm2Numbers
18 0.8-0.9 3-644508-1
20 0.5-0.6 3-644509-1
22 0.3-0.4 3-644510-1
.562
[14.27]
.116
[2.95]
AWG AWG
AWG
Connector Ordering
Information
The “Base Part Numbers”
Chart above shows the base
part number and number of
circuits available for the
described connectors.
Prefixes and suffixes are deter-
mined by the number of circuit
positions in the connector. For
example, the complete part
number for a 10-position
closed end connector with
locking ramp and without
polarizing tabs for 18 AWG
wire would be:
Base number 644329 plus
prefix-and-suffix
1- —-0
The correct ordering number is
1-644329-0
The set of numbers in bold face
are the RoHS equivalent ver-
sion of the standard product.
Example:
No. of Standard Lead Free
Pos. Prefix/Suffix RoHS
Prefix/Suffix
2 644329–2 3-644329–2
thru
12 1-644329-2 4-644329-2
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Replacement IDC Contacts
Material and Finish
Contacts — High conductivity copper
alloy post tin plated
MTA-156 IDC Quad Connectors—Closed End and Feed-Thru
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
56
MTA-156
.156 [3.96]
.170
[4.32]
.156
[3.96]
Typ.
A
B
C
.161
[4.09]
.094
[2.39]
.380
[9.65]
.075
[1.91]
.677
[17.2]
.440
[11.18]
Ref.
.300
[7.62]
.125
[3.18] Dia.
.312
[7.92 ]
± .005
± 0.13
.015
[0.38 ]
± .005
± 0.13
.100
[2.54]
Min.
.100
[2.54]
Min.
Circuitry
side
.090
[2.29]
Min.
.156
[3.96]
Typ. x 45° Cham.
Both sides
D[ ]
± .005
± 0.13
Recommended PC Board Layout
for .062 [1.57] Thk. PC Board
B
E
.145
[3.68]
.375
[9.53]
.138
[3.51]
.075
[1.91]
R.
.130
[3.3]
Typ.
Recommended Panel Cutout
Material and Finish
Housing — UL94V-0 rated, polyester,
see chart for color
Contacts — Phosphor bronze, post tin
plated
Note: Refer to pages 70 thru 74 for
approved wire listings.
Color Coding by Wire Size for
UL94V-0 Connectors
26 AWG — Blue
24 AWG — White
22 AWG — Red
20 AWG — Yellow
18 AWG — Orange
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the
base part number and num-
ber of circuits available for
the described connectors.
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
12-position closed end con-
nector without mounting ears
for 18 AWG wire would be:
Base number 640859 plus
prefix-and-suffix
1- —-2
The correct ordering num-
ber is
1-640859-2
See page 15 for an explanation of
RoHS lead free equivalents.
Performance Data
Voltage Rating — 600 vac
Current Rating — 5 amp max.
Low-Level Resistance —
7 m⍀max. initial
Dielectric Withstanding Voltage —
1250 vac/1 min.
Insulation Resistance —
5000 M⍀min. initial
Operating Temperature —
⫺55⬚Cto⫹105⬚C
Technical Documents
Product Specification
108-1058 MTA-156 Card Edge
Connectors
Application Specification
114-1020 MTA-156 Connectors,
Posted Connectors and
Card Edge Connectors
Base Part Numbers
Closed End Feed-Thru
Connector Type Without With Without With
& Wire Size Mounting Ears Mounting Ears Mounting Ears Mounting Ears
No. of No. of No. of No. of
Connector Circuits/ Connector Circuits/ Connector Circuits/ Connector Circuits/
Part Nos. RoHS Part Nos. RoHS Part Nos. RoHS Part Nos. RoHS
Equiv. Equiv. Equiv. Equiv.
Standard UL94V-0, Tin Plated
3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12,
18 AWG 640859 15,18, 20-24 640864 15,18, 20-24 641283 15,18, 20-24 641288 15,18, 20-24
0.8-0.9 mm233, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42,
45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54
3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12,
20 AWG 640860 15,18, 20-24 640865 15,18, 20-24 641284 15,18, 20-24 641289 15,18, 20-24
0.5-0.6 mm233, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42,
45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54
3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12,
22 AWG 640861 15,18, 20-24 640866 15,18, 20-24 641285 15,18, 20-24 641290 15,18, 20-24
0.3-0.4 mm233, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42,
45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54
3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12,
24 AWG 640862 15,18, 20-24 640867 15,18, 20-24 641286 15,18, 20-24 641291 15,18, 20-24
0.2 mm233, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42,
45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54
3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12,
26 AWG 640863 15,18, 20-24 640868 15,18, 20-24 641287 15,18, 20-24 641292 15,18, 20-24
0.12-0.15 mm233, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42,
45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54
No. of Dimensions Prefix/
Circuits ABCDE Suffix
3.500 [12.70] .926 [23.52] 1.248 [31.70] .484 [12.29] .650 [16.51] -3
6.968 [24.59] 1.394 [35.41] 1.716 [43.59] .952 [24.18] 1.118 [28.40] -6
91.436 [36.47] 1.862 [47.29] 2.184 [55.47] 1.420 [36.07] 1.586 [40.28] -9
12 1.904 [48.36] 2.330 [59.18] 2.652 [67.36] 1.888 [47.96] 2.054 [52.17] 1- -2
15 2.372 [60.25] 2.798 [71.07] 3.120 [79.25] 2.356 [59.84] 2.522 [64.06] 1- -5
18 2.840 [72.14] 3.266 [82.96] 3.588 [91.14] 2.824 [71.73] 2.990 [75.95] 1- -8
20 3.152 [80.06] 3.578 [90.88] 3.900 [99.06] 3.136 [79.65] 3.302 [83.87] 2- -0
21 3.308 [84.02] 3.734 [94.84] 4.056 [103.02] 3.292 [83.62] 3.458 [87.83] 2- -1
22 3.464 [87.99] 3.890 [98.81] 4.212 [106.98] 3.448 [87.58] 3.614 [91.80] 2- -2
23 3.620 [91.95] 4.046 [102.77] 4.368 [110.95] 3.604 [91.54] 3.770 [95.76] 2- -3
24 3.776 [95.91] 4.202 [106.73] 4.524 [114.91] 3.760 [95.50] 3.926 [99.72] 2- -4
MTA-156 IDC Card Edge Connectors—Closed End and Feed-Thru
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
57
MTA-156
.156 [3.96]
Dust Cover
Material (RoHS Compliant)
UL94V-0 rated, polyester, white
Cover is for both Closed End
and Feed-Thru connectors
Cover Ordering Information
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for
a 12-position dust cover
would be:
Base number 641106 plus
prefix-and-suffix
1- —-2
The correct ordering number
is
1-641106-2
.130
[3.3]
.609
[15.47]
.126
[3.2]
.100
[2.54]
Locking Plugs
Material (RoHS Compliant)
UL94V-2 rated, nylon, white
Part Number 641101-1
A.130
[3.3]
.530
[13.46]
Retention Dimple
No. of Dim. Prefix/
Circuits A Suffix
3.504 -3
12.80
6.972 -6
24.69
91.440 -9
36.58
12 1.908 1- -2
48.46
15 2.376 1- -5
60.35
18 2.844 1- -8
72.24
20 3.156 2- -0
80.16
21 3.312 2- -1
84.12
22 3.468 2- -2
88.09
23 3.624 2- -3
92.05
24 3.780 2- -4
96.01
.195
[4.95]
.075
[1.91]
.074
[1.88]
1.150
[29.21]
Note: Contact can remain during
locking plug installation.
Material (RoHS Compliant)
UL94V-2 rated, nylon, white
Part Number 641293-1
.900
[22.86]
.170
[4.32]
.100
[2.54]
Note: Contact must be removed to
install locking plug.
Base Part Number
Cover Part No. No. of Circuits
641106 3, 6, 9, 12, 15, 18, 20-24
Replacement IDC Contacts
Material and Finish
Phosphor bronze; post tin plated
Part Numbers
3-640991-1 (18 AWG [0.8-0.9 mm2])
3-640992-1 (20 AWG [0.5-0.6 mm2])
3-640993-1 (22 AWG [0.3-0.4 mm2])
3-640994-1 (24 AWG [0.2 mm2])
3-640995-1 (26 AWG [0.12-0.15 mm2])
MTA-156 IDC Card Edge Accessories
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
58
SL-156
.156 [3.96]
The AMP SL-156 connec-
tors shown on the following
pages are designed to
mate with .045 [1.14]
square or round post
headers or staked posts on
.156 [3.96] centers.
The wire-to-board
connector is a two-piece
connector system with the
wire crimped to the contact,
then inserted into the hous-
ing. This product mates with
the MTA-156 flat, polarized
and friction lock header, or
staked posts (not MTA-156
shrouded headers).
Performance Data
Voltage Rating — 250 vac
Current Rating —
10 amp max. at 250 vac
Low-Level Resistance —
3.0 m⍀max. initial
Dielectric Withstanding Voltage —
2000 vac/1 min.
Insulation Resistance —
1000 M⍀min. initial
Operating Temperature —
⫺55⬚Cto⫹105⬚C
The Large Insulation
Diameter (LID) Contacts
and Housings are for use
in applications where wire
insulation is up to .112
[2.84] in diameter.
Technical Documents
Product Specification
108-1049, 108-1049-1, 108-1049-2
Application Specification
114-1021
Product Facts
■Rugged wire-to-board
interconnection to mate
with .045 square or round
post headers or staked
posts on .156 centers
■Standard Connectors accept
wire range of 18–24 AWG
[0.9–0.2 mm✒] and LID
Connectors accept wire
range of 18–24 AWG
[0.9–0.2 mm✒] and a lim-
ited 16 AWG [1.29–1.42
mm✒] (2550–2800 CMA)
■Two-piece interconnection
system (connector/header)
■Housing made of flame
retardant nylon
■Available in 1- through
24-position connector
configurations
■Connectors are end-to-end
stackable
■Wire-to-board system offers
polarization with friction
lock for positive mating
■Meets the material
requirements of Table 23.1
of UL1410 Standard for
High-Voltage Television
Receivers and Video
Productions
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
R
R
Y
647230
N
Y
N
YY
YYY
YYY
647227
647228
647229
647260
Y
Y
N
644769
647262
N
Y
Y
647261
Y
Y
Y
Y
Y
Y
644751
YYYYN
YYYYY
YYYYN
644752
644753
644754
644755
YYYY
YYYY
YYYYYN
Y
Y
NY
YY
644756
644757
644758
644759
644760
644761
644762
Y
641113
647401 YYYYY
647400 YYYYY
647402 YYYYY
YYYY
YYYY
YYYYYY
Y
Y
YY
YY
641114
641115
N
Y
N
641118
641119
641120
641121
644763
644764
644765
644766
644767
644768
Headers
640383
647401 YYYNY
647400
LID
LID
LID
YYYYY
647402 YYYNY
YY
YY
YY
Y
Y
Y
640384
640385
640387
640388
640389
640445
644611
644612
644613
644614
644615
644616
644617
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
644750
Y
Y
Y
Headers
644749
Y
644322
Y
Y
Y
Y
Y
N
647401
647400
647402
YY
YY
YYYYYY
Y
Y
YNYY
YYYY
YYY
640250
640251
770849
Housings
640250
640251
Standard
Standard
Standard
770849
Housings
640250
640251
770849
Housings
641202
641203
641204
641207
641208
641209
641210
644627
644628
644629
644630
644631
644632
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Headers
644633
Y
Y
YY
These matrixes represent only the housing and header
combinations. You also need to consider the plating on
the contacts and headers. Gold contacts with gold
headers and tin contacts with tin headers.
Matrix for Tin Plated
Part Numbers
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
.156 [3.96] Centerline SL-156 Crimp Contacts and Housings
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
59
SL-156
.156 [3.96]
For housings, see pages 60
and 61.
Contacts
Material and Finish
.012 [0.3] bright tin plated brass or
phosphor bronze; .012 [0.3] pre-tin
brass; or .012 [0.3] brass or phosphor
bronze with .000030 [0.00076] gold
over nickel (see chart)
■All tin-plated contacts are
post lubricated to resist
fretting corrosion
■Maximum insulation
diameter is .105 [2.67]
■Wire range is 18-30 AWG
[0.9-0.06 mm2]
Application Note
Part No. 640252 has a
higher mating and un-
mating force than Part
No. 350980 and is recom-
mended to be used only in
housings with 1 through 12
positions.
Part No. 350980 can be
used in any size housing
but is recommended to be
used in housings with 13
through 24 positions.
Part No. 770476 is recom-
mended for use in any size
housing. Its mating force is
similar to Part No. 350980
while unmating force is
similar to 640252.
.115
[2.92]
.121/.115
[3.07/2.92]
.145/.140
[3.68/3.56]
.230
[5.84]
.180
[4.57]
.131 ±.004
[3.33 ±0.10]
A
High Force
(6.5 Amp Max. Current Rating)
B
Low Force
(6.5 Amp Max. Current Rating)
C
Hooded (Dual Wipe)
(10 Amp. Max. Current Rating)
Wire Size Contact Material and Finish Part Numbers
AWG mm2Strip Loose Piece
24–30 A brass, pre-tin plated 641550-1 —
0.2-0.06
brass, bright tin plated 640252-1 640706-1
A brass, pre-tin plated 640252-2 640706-2
brass, RoHS Compliant 3-640252-1 3-640706-1
brass, bright tin plated 350980-1 640707-1
18–24 brass, pre-tin plated 350980-2 —
0.9-0.2 Bbrass, gold plated 350980-3 770258-1
brass, RoHS Compliant 3-350980-1 3-640707-1
phosphor bronze, bright tin plated 770476-1 770522-1
C phosphor bronze, gold plated 770476-2 770522-2
phosphor bronze, RoHS Compliant 3-770476-1 3-770522-1
Keying Plugs
Material (RoHS Compliant)
UL94V-2 rated, nylon, natural color
.300
[7.62]
.225
[5.72]
.300
[7.62]
Keying Plug
Part No. 640254-1
Keying Pin
Part No. 640255-1
Application Tooling
Extraction Tool
Part No. 90471-1
Loose Piece Contacts —
PRO-CRIMPER II Hand Tool
Part No. 58614-1 (408-4228)
[For field service use only]
For CERTI-CRIMP hand tool, contact
Technical Support.
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Applicator 680211-3
(Request Catalog 65828)
AMP-O-LECTRIC Model “K”
Termination Machine* Applicator
466468-2
AMP-O-MATIC Stripper-Crimper
Machine* SCA 466947-1 or 567828-1
(with CQM) (Request Catalog 65004)
AMPOMATOR CLS IV+ Lead Making
Machine* Applicator 466468-1
(Request Catalog 82659)
*Requires applicators. For part
numbers, call Technical Support.
SL-156 Crimp Contacts and Keying Plugs
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
60
SL-156
.156 [3.96]
Housings
Material (RoHS Compliant)
UL94V-0 rated, nylon, white
Notes:
1. Accepts either .045 [1.14]
square or round posts. Housings
mate with flat and friction lock
headers, or staked posts on .156
[3.96] centers.
2. Housings without ramp, with
polarizing tab, available upon
request. Minimums may apply.
3. Recommend contact:
Part No. 640252 for 1 thru 12
positions; Part No. 350980 for 13
thru 24 positions; Part No. 770476
for 1 thru 24 positions.
(A) With Locking Ramp/With Polarizing Tabs
(B) With Locking Ramp/Without Polarizing Tabs
(C) Without Locking Ramp/Without PolarizingTabs
.660
[16.76]
.100
[2.54]
.019
[0.48]
.250
[6.35] 12223 4
.156
[3.96]
Typ.
.076
[1.93]
Typ.
A
.097
[2.46]
.037
[0.93] Ref.
12223 4
.660
[16.76]
.250
[6.35]
.100
[2.54] .156
[3.96]
Typ.
.076
[1.93]
Typ.
A
.037
[0.93]
.097
[2.46]
Ref.
12223 4
.660
[16.76]
.250
[6.35]
.156
[3.96]
Typ.
.076
[1.93]
A
Typ.
.060
[1.52]
For contacts, see page 59.
For mateability options, see
matrix on page 58.
For mating half visuals, for
connectors with locking
ramp, see pages 46, 47,
48, 50 and 52, (49 and 51
Front Bend Headers only.)
For mating half visuals,
for connectors without lock-
ing ramp, see pages 46
thru 52.
No. of Housing Description Part Numbers*
Positions*
2–24 A With Locking Ramp and Polarizing Tabs 770849
1–24 B With Locking Ramp and without Polarizing Tabs 640250
C Without Locking Ramp or Polarizing Tabs 640251
*Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and
12 Position = 1-xxxxxx-2.
Note: Housings not for use with LID Contacts. Shown on page 62.
Note: Dim. A = 0.156 ⫻(No. of Positions – 1) ⫹0.152
SL-156 Housings—Wire-to-Board
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
61
SL-156
.156 [3.96]
Housings
Material (RoHS Compliant)
UL94V-2 rated, nylon, white
.078
[1.98]
.105
[2.67]
PC Board
Posts
.156
[3.96]
1234 78910
123478910
[4.14
.163 + .005
– .000
+ 0.13
– 0.00
.052
[1.32 ]
± .002
± 0.05
B
.105
[2.67]
Latch Cutout
.015
[0.38]
4 Plc.
Max.R.
A
.078
[1.98] Typ.
.156
[3.96] Typ.
.063
[1.60 ]
± .003
± 0.08
.063
[1.60 ]
± .003
± 0.08
.050
[1.27 ]
± .007
± 0.18
.075
[1.91]
.250
[6.35]
.125
[3.18]
.660
[16.76]
No. of Dimensions Latch Location Part
Pos. AB
Centered Between Pos. Number
2.312 1 and 2 1-770894-21
7.92 —
3.468 1 and 2 1-770894-31
11.89 —
4.624 2 and 3 1-770894-41
15.85 —
5.780 2 and 3 1-770894-51
19.81 —
6.936 3 and 4 1-770894-61
23.77 —
71.092 3 and 4 1-770894-71
27.74 —
81.248 4 and 5 1-770894-81
31.70 —
91.404 1.092 1 and 2 & 8 and 9 1-770894-91
35.66 27.74
10 1.560 1.248 1 and 2 & 9 and 10 1-770894-01
39.62 31.70
Note: Not for use with LID Contacts. Shown on page 62.
Recommended PC Board Cutout
for .062 [1.57] Thick PC Board
Mates with .045 square or
round staked posts only.
For contacts, see page 59
.
SL-156 Housings With Through Board Latch
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
62
SL-156
.156 [3.96]
.054
[1.37]
.095
[2.41] Typ.
.156
[3.96]Typ.
.054
[1.37]
Typ.
.0365
[.927]
Ref.
.100
[2.54]
.250
[6.35]
.660
[16.76]
A
Contacts
Material and Finish
.012 [0.3] bright tin plated phosphor
bronze; .012 [0.3] phosphor bronze
with .000030 [0.00076] gold over nickel
(see chart)
■All tin-plated contacts are
post lubricated to resist
fretting corrosion
■Maximum insulation
diameter is .112 [2.85]
■Wire range is 18-24 AWG
[0.9-0.2 mm2] and a limited
16 AWG [1.29-1.42 mm2]
(2550-2800 CMA)
Product Specifications
108-1049-1 and 108-1049-2
Application Specification
114-1021
Application Tooling
Extraction Tool Part No. 90471-1
Loose Piece Contacts —
PRO-CRIMPER II Hand Tool
Part No. 91368-1 [18-24 AWG]
Part No. 91369-1 [16 AWG]
(For field service use only.)
For CERTI-CRIMP hand tool, contact
Technical Support.
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Applicator 1385048-3 [18-24 AWG]
Applicator 1385219-3 [16 AWG]
AMP-O-LECTRIC Model “K”
Termination Machine*
Applicator 1385048-2 [18-24 AWG]
Applicator 1385219-2 [16 AWG]
Housings
Material (RoHS Compliant)
UL 94V-0 rated, nylon, white
Notes:
1. Accepts Standard and LID
contacts.
2. Larger opening in housings
eases contact insertion when
using wires that have large
insulation diameters (.100-.112
[2.54-2.84]).
3. Housings are not End-to-End
stackable.
For mateability options, see
matrix on page 58.
For mating half visuals, for
connectors with locking
ramp, see pages 46, 47,
48, 50 and 52, (49 and 51
Front Bend Headers only.)
For mating half visuals, for
connectors without locking
ramp, see pages 46 thru 52.
Part Numbers*
No. of Description Housings
Positions* with Larger Openings
for Oversize Wire
1-24
Without Locking Ramp 647400
or Polarizing Tabs
With Locking Ramp and 647401
without Polarizing Tabs (shown above)
2–24 With Locking Ramp and 647402
Polarizing Tabs
*Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and
12 Position = 1-xxxxxx-2.
Wire Part Numbers
Size Material Plating For LID* Wire
Strip Loose Piece
Phosphor Tin 647406-1 647409-1
18-24 AWG Bronze Gold 647406-2 647409-2
RoHS Compliant 3-647406-1 3-647409-1
16 AWG Phosphor Tin 647466-1 647485-1
(2550-2800 CMA only) Bronze Gold 647466-2 647485-2
RoHS Compliant 3-647466-1 3-647485-1
*Large Insulation Diameter (.100-.112 [2.54-2.84])
Notes: 1. For information on application tooling, call Technical Support.
2. Can not be used with Standard SL-156 Housings, must be used with LID Housings only.
.160
[4.06]
.112 [2.84]
.108 [2.74]
.524
[13.30]
.143
Hooded (Dual Wipe)
(10 Amp Max. Current Rating)
*For additional part numbers and
information contact Technical Support.
Note: Dim. A = 0.156 ⫻(No. of Positions – 1) ⫹0.19
SL-156 Housings and Contacts for Large Insulation Diameter (LID) Wire
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
63
AMP EP
.156 [3.96], .200 [5.08] and .312 [7.92]
Product Facts
■.156 [3.96], .200 [5.08] and
.312 [7.92] centerline
■Wire-to-board connectors
comprised of plug housings,
receptacle contacts for
discrete wire, and mating
post headers
■Hooded contact designed to
accept wire with insulation
diameters up to .118 [3.00]
■Positive locking feature
built into header back wall
■Locking mechanism on
connector housing
maximizes retention
■Number of positions: 1 to 11
for .156 [3.96] centerline;
2 to 12 for .200 [5.08]
centerline; and 2 to 5 for
.312 [7.92] centerline
■Straight, through-hole
headers
■Positive latch design for
easier mating and unmating
■Polarization tabs help
prevent post misalignment
and mismating
■Low-profile mating height of
.641 [16.3] for 2 to 11
positions
■Straight headers are end-to-
end stackable to conserve
PCB space
■Header packaging: bulk
pack and tube loaded
■Plug housings and post
headers intermateable with
JST VH connectors
■Directive 2002/95/EC (RoHS
Compliant
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
Applications
■Household appliances,
garage door openers,
power supplies, power
connections, or other
areas requiring additional
connector retention
R
R
AMP Economy Power (EP)
Connectors are designed
for secondary power circuit
applications. They consist
of wire-to-pc board plug
housings (for receptacle
contacts) and mating post
headers. Three contact
centerline spacings are
available: .156 [3.96], .200
[5.08] and .312 [7.92].
During mating, the positive
locking lever on the outside
of the plug housing
engages the mating header
housing to provide for
greater retention. This
helps maintain reliable
connections, when other
non-locking type connec-
tors could vibrate apart.
This same locking lever
must be depressed to
unmate the connectors.
The locking mechanism is
also located high enough to
help avoid interference with
pc board clear plastic
coating (potting), which is a
common treatment for many
home appliances.
Headers with .156 [3.96]
centerline are offered in
2 through 11 positions;
2 through 12 positions for
.200 [5.08] centerline; and
.312 [7.92] centerline are
available in 2 through 5
positions. Both versions are
provided in bulk pack or in
tubes for automatic
machines.
The slim, straight, post
headers are stackable end-
to-end for greater flexibility
when designing pc board
configurations.
The mating height of a
low-profile plug and vertical
header is .642 [16.3]; even
the 1-position high-profile
style measures only .732
[18.6] above the pc board.
Compact dimensions like
these are well suited for
most applications in con-
fined spaces.
Performance Characteristics
Voltage Rating — 250 VAC
Current Rating — 7.5 amp max. (2 to
11 pos.), 8 amp max. (1 pos.)
Low Level Overall Resistance–
Initial — 10 mΩmax.
Final — 20 mΩmax.
Dielectric Withstanding Voltage —
1.5 kV AC, 1 min.
Insulation Resistance —
Initial — 1000 MΩmin.
Final — 500 MΩmin.
Durability — 50 mating and unmating
cycles
Operating Temperature — -13˚F to
+221˚F [-25°C to +105°C]
Wire Size Range — 18-22 AWG
[0.89-0.30 mm2]
Insulation Diameter — .118 [3.00]
max.
Technical Documents
Product Specification
108-5609
Application Specification
114-5253
Instruction Sheet
411-5899
AMP Economy Power (EP) Wire-to-Board Connector System
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
64
AMP EP
.156 [3.96]
Contacts and Plug
Housings, Low-Profile
Crimp, Snap-in
Receptacle Contacts
Material and Finish
(RoHS Compliant)
See chart.
Related Product Data
Plug Housings — Pages 64, 67 and 69
Plug Housings, Low-Profile
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Related Product Data
Contacts — see above
Mating Post Headers — Pages 65
and 66
.083
[2.11]
.055
[1.40]
.08
[2.1
.362
[9.19]
.382
[9.70]
.154 [3.91]
.039 [1.00]
.524
[13.31]
.284
[7.21]
.224
[5.69]
.156
[3.96]
.150
[3.81]
(3-11 Pos.)
.295 [7.49]
.039
[1.00]
.059
[1.50]
A
(2 Pos.)
.142 [3.61]
Section X-X
Circuit No. 1
Number of Dimension Part
Positions A Number
2.310 [ 7.86] 1-1123722-2
3.465 [11.82] 1-1123722-3
4.621 [15.78] 1-1123722-4
5.777 [19.74] 1-1123722-5
6.933 [23.70] 1-1123722-6
71.089 [27.66] 1-1123722-7
81.245 [31.62] 1-1123722-8
91.401 [35.58] 1-1123722-9
10 1.557 [39.54] 1-1123722-0
11 1.713 [43.50] 1-1123722-1
12 1.878 [47.70] 1-647690-2*
* Consult Product Drawing for dimensional detail.
Applicator Part Number
Wire Size Wire Material Part AMPOMATOR AMP-O-LECTRIC
Range Insulation and Number CLS IV+ Terminator
AWG mm2Diameter Finish Strip Loose Lead Maker Model K Model G
Form Piece Base Part No. Part No. Part No.
356500 1-471273-3 354500-1
Phos. Brz., 1123721-1 1318912-1*
18–22 0.89-0.30 .067-.118 Pre-Tin 1385286-1 1385286-2 1385286-3
1.70-3.00 Brass, 1123721-2 —
Pre-Tin
* For 18–20 AWG, use Straight Action Hand Tool (SAHT) Part Number 91579-1.
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
65
AMP EP
.156 [3.96]
Straight and Right-Angle
Low-Profile Post Headers
.156 [3.96] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated natural
color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
Related Product Data
Mating Plug Housings — Page 64
Number of Dimension Part Number
Positions A Bulk Pack Tube Loaded (Pcs. per Tube) Bulk Pack with Pegs
2.310 [ 7.86] 1-1123723-2 1-1318300-2 (61) 1744057-2
3.465 [11.82] 1-1123723-3 1-1318300-3 (40) 1744057-3
4.621 [15.78] 1-1123723-4 1-1318300-4 (30) 1744057-4
5.777 [19.74] 1-1123723-5 1-1318300-5 (24) 1744057-5
6.933 [23.70] 1-1123723-6 1-1318300-6 (20) 1744057-6
71.089 [27.66] 1-1123723-7 1-1318300-7 (17) 1744057-7
81.245 [31.62] 1-1123723-8 1-1318300-8 (15) 1744057-8
91.401 [35.58] 1-1123723-9 1-1318300-9 (13) 1744057-9
10 1.557 [39.54] 1-1123723-0 1-1318300-0 (12) 1-1744057-0
11 1.713 [43.50] 1-1123723-1 1-1318300-1 (11) 1-1744057-1
12 1.871 [47.52] 1-647689-2* — 1-1744057-2
* Consult Product Drawing for dimensional detail.
Post No. 1
.028 [0.7]
.244 [6.2]
.118 [3.0]
.146 [3.7]
.303 [7.7]
.077 [1.95]
.045
[1.14] Sq. Post
.077 [1.95] .156
[3.96] Centerline
.268
[6.8]
.335
[8.5]
A
Straight
.156 [3.96] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
Related Product Data
Mating Plug Housings — Page 64
Number of Dimension Part Number
Positions A
2.312 [ 7.92] 647676-2
3.468 [11.88] 647676-3
4.624 [15.84] 647676-4
5.780 [19.80] 647676-5
6.935 [23.76] 647676-6
71.091 [27.72] 647676-7
81.247 [31.68] 647676-8
91.403 [35.64] 647676-9
10 1.559 [39.60] 1-647676-0
11 1.715 [43.56] 1-647676-1
12 1.871 [47.52] 1-647676-2
A
.339
[8.60]
.272
[6.90]
.020
[0.50]
.126
[3.20]
.142
[3.60]
.323
[8.20]
.339
[8.60] .370
[9.40]
.126 ±.004
[3.20 ±0.10]
.079 ±.004
[2.00 ±0.10]
.045
[1.14] Ref.
.156
[3.96]
.045
[1.14]
Post No. 1
Sq. Post
Right-Angle
Edge of Board
.
.350
[8.89]
Ø .065/.069
[1.65/1.75]
Typ.
.156
[3.96]
.
Recommended
PC Board Layout
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Edge of Board
.190 [4.82]
.125 [3.18]
Typ.
.156 [3.96]
.069/.065
[1.75/1.65]
.066/.062
[1.68/1.57]
Typ.
.078 [1.98]
Recommended Mounting Hole Pattern
for .063 [1.6] Thick PC Board
66
AMP EP
.156 [3.96]
Straight and Right-Angle
Low-Profile Post Headers,
High Temperature
.156 [3.96] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
high temperature, natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
Related Product Data
Mating Plug Housings — Page 64
.156 [3.96] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
high temperature, natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
Related Product Data
Mating Plug Housings — Page 64
Straight
Right-Angle
Number of Dimension Part Number
Positions A
2.312 [ 7.92] 1744055-2
3.468 [11.88] 1744055-3
4.624 [15.84] 1744055-4
5 .780 [19.80] 1744055-5
6.935 [23.76] 1744055-6
71.091 [27.72] 1744055-7
81.247 [31.68] 1744055-8
91.403 [35.64] 1744055-9
10 1.559 [39.60] 1-1744055-0
11 1.715 [43.56] 1-1744055-1
Number of Dimension Part Number
Positions A
2.312 [ 7.92] 1744056-2
3.468 [11.88] 1744056-3
4.624 [15.84] 1744056-4
5.780 [19.80] 1744056-5
6.935 [23.76] 1744056-6
71.091 [27.72] 1744056-7
81.247 [31.68] 1744056-8
91.403 [35.64] 1744056-9
10 1.559 [39.60] 1-1744056-0
11 1.715 [43.56] 1-1744056-1
12 1.871 [47.52] 1-1744056-2
Maximum Temperature Rating: 280°C
A
.339
[8.60]
Edge of Board
.575
[14.60]
.156
[3.96] Typ. .045
[1.14] Sq. Post
Typ.
.059
[1.51]
.323
[8.21]
.156
[3.96]
.225
[5.72]
Ø .065/.069
[1.65/1.75]
.190
[4.82]
.303
[7.70] .370
[9.40]
.145
[3.69]
Post No. 1
A
.339
[8.60]
Edge of Board
.617
[15.68]
.059
[1.51]
.323
[8.21]
.142
[3.60]
.350
[8.89]
Ø .065/.069
[1.65/1.75]
.190
[4.82]
.303
[7.70] .370
[9.40]
Post No. 1
.156
[3.96] Typ. Typ.
.156
[3.96]
.045
[1.14] Sq. Post
Recommended
PC Board Layout
Recommended
PC Board Layout
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
AMP EP
.200 [5.08]
67
Plug Housings and
Post Headers
Plug Housings
.200 [5.08] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Related Product Data
Contacts — Page 64
Mating Post Headers — See below
A.406
[10.30] .263
[8.88]
.051
[1.30]
.200
[5.08]
.051
[1.30]
.053
[1.35] Typ.
Typ.
Circuit No. 1
Number of Dimension Part
Positions A Number
2.353 [ 8.98] 1744036-2
3.553 [14.06] 1744036-3
4 .753 [19.14] 1744036-4
5.953 [24.22] 1744036-5
61.153 [29.30] 1744036-6
71.353 [34.38] 1744036-7
81.553 [39.46] 1744036-8
91.753 [44.54] 1744036-9
10 1.953 [49.62] 1-1744036-0
11 2.153 [54.70] 1-1744036-1
12 2.353 [59.78] 1-1744036-2
Post Headers
.200 [5.08] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post—Tin-plated brass
Related Product Data
Mating Plug Housings — See above
Number of Dimension Part Number
Positions A Straight Right-Angle
2.302 [ 7.68] 1744037-2 1744048-2
3.502 [12.76] 1744037-3 1744048-3
4.702 [17.84] 1744037-4 1744048-4
5.902 [22.92] 1744037-5 1744048-5
61.102 [28.00] 1744037-6 1744048-6
71.302 [33.08] 1744037-7 1744048-7
81.502 [38.16] 1744037-8 1744048-8
91.702 [43.24] 1744037-9 1744048-9
10 1.902 [48.32] 1-1744037-0 1-1744048-0
11 2.102 [53.40] 1-1744037-1 1-1744048-1
12 2.302 [58.48] 1-1744037-2 1-1744048-2
A
.339
[8.60]
.575
[14.60]
.200
[5.08] Typ.
Typ.
.323
[8.21]
.200
[5.08]
Ø .065/.069
[1.65/1.75]
.190
[4.82]
.303
[7.70] .370
[9.40]
.059
[1.51]
.146
[3.70]
Post No. 1
Recommended PC Board Layout
Sq. Post
.045
[1.14]
A
.339
[8.60]
Edge of Board
.059
[1.51]
.323
[8.21]
.142
[3.60]
.669
[17.00]
Ø .065/.069
[1.65/1.75]
.190
[4.82]
.303
[7.70] .370
[9.40]
Post
No. 1
Ref. Max.
2 Plcs.
.080
[2.02]
Sq. Post
.045
[1.14]
.200
[5.08] Typ.
Recommended PC Board Layout
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
AMP EP
.312 [7.92]
68
Straight Post Headers,
Low-Profile
.312 [7.92] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated natural
color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
Related Product Data
Mating Plug Housings — Page 64
Number of Dimension Part Number
Positions A Bulk Pack Tube Loaded (Pcs. per Tube)
2.465 [11.82] 1-1123724-2 1-1318301-2 (40)
3.777 [19.74] 1-1123724-3 1-1318301-3 (24)
41.089 [27.66] 1-1123724-4 1-1318301-4 (17)
51.401 [35.58] 1-1123724-5 1-1318301-5 (13)
A
.077 [1.95]
.028 [0.7]
.312 [7.92]
Centerline
.077 [1.95]
.045 Sq. Post
[1.14]
.244 [6.2]
.118 [3.0]
.146 [3.7]
.303 [7.7]
.312 [7.92] Centerline
Recommended PC Board Layout
Acceptable Board Thickness
.062 [1.57]
.063 +.004/-0 Dia. Punched Hole
[1.60 +0.1/-0]
.065 +.004/-0 Dia. Drilled Hole
[1.65 +0.1/-0]
.335
[8.5] .268
[6.8]
Post No. 1
Mating Height
(Low-Profile)
Mating Height
.642 [16.3]
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
AMP EP
High-Profile 1 Position
69
Plug Housing and
Post Header, High-Profile
1 Position Plug Housing
Part Number 1-1123823-1
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Related Product Data
Contacts — Page 64
Mating Post Header — See below
1 Position Post Header,
Straight
Part Numbers
1-1123824-1 (Bulk Pack)
1-1318831-1 (Tube Loaded,
55 pcs. per Tube)
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
Related Product Data
Mating Plug Housing — See above
.571
[14.5]
.244 [6.2] .169 [4.3] .224 [5.7]
.039 [1.0]
.150 [3.8]
.207 [5.3]
Section X-X
Recommended PC Board Layout
Acceptable Board Thickness
.062 [1.57]
Soldering Side
Component Mounting Side
Section X-X
.528
[13.4]
.327 Max.
[8.3]
Urethane Coating Area
.337 [8.55]
.146 [3.7]
.118 [3.0]
.079-.032±.004
[2-0.8±0.1]
.079-.051+.004/-0
[2-1.3+0.1/-0]
.079-.142±.004
[2-3.6±0.1]
.315±.004 [8.0±0.1]
.158±.004 [4.0±0.1]
.128 [3.25]
.189 [4.8]
.045 [1.14] Sq. Post
PC Board
Eyelet
.118
[3.0]
.347
[8.8] .252
[6.4]
.154 [3.9] Max. Dia.
.197 [5.0]
Max. Dia.
.063 +.004/-0 Dia. Punched Hole
[1.60 +0.1/-0]
.065 +.004/-0 Dia. Drilled Hole
[1.65 +0.1/-0]
Mating Height
(High-Profile)
Mating Height
.732 [18.6]
Potting Height
.327 [8.3] Max.
Retention Lock
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
70
MTA
Wire Selection
Proper wire selection is critical
to the success of a wire-to-
board application. The chart
identifies wires that have been
evaluated and approved by the
product engineering section.
If you plan to use a wire not
on the approved list, please
submit a sample 12" length of
wire to Tyco Electronics for
evaluation.
AWG Metric Equivalents
18 —0.8 –0.9 mm2
20 —0.5 –0.6 mm2
22 —0.3 –0.4 mm2
24 —0.2 mm2
26 —0.12 –0.15 mm2
28 —0.08 –0.09 mm2
Product Specifications
108-1050 — MTA-100 Connectors
108-1050-1—MTA-100 Posted
Connectors
108-1051 — MTA-156 Connectors
108-1219 — MTA-156 Quad Connector
System
108-1065—MTA-156 Posted
Connectors
108-1058 — MTA-156 Card Edge
Connectors
Application Specifications
114-1019 — MTA-100 Connectors
114-1020 — MTA-156 Connectors
114-1031 — MTA-100 Ribbon Cable
Connector Assembly
114-1032 — MTA-156 Ribbon Cable
Connector Assembly
114-1048 — MTA-156 Quad Connector
MTA Connectors Approved Wire Listing
MTA-100 Connectors Wall Approved Wire AWG
UL 1007 PVC Insulation .015″[0.381] 22, 24, 26, 28
UL 1061 Semi-Rigid PVC Insulation .009″[0.229] 22, 24, 26, 28
UL 1095 Semi-Rigid PVC Insulation .012″[0.305] 24
UL 1371 TEFLON Insulation — TFE .006″[0.152] 22, 26
UL 1429 Irradiated PVC — X.L.P.V.C. .010″[0.254] 22, 24, 26, 28
UL 2464 PVC .013″[0.330] 24
UL 3265 Irradiated Polyethylene — X.L.P.E. .010″[0.254] 22, 24
UL 3266 Irradiated Polyethylene — X.L.P.E. .015″[0.381] 22, 24
MIL-W-16878, Type B-PVC Insulation .010″[0.254] 22
UL 1213 TEFLON Insulation—T.F.E. .010″[0.254] 22
MTA-156 Connectors
UL 1007 PVC Insulation .015″[0.381] 18, 20, 22, 24
UL 1061 Semi-Rigid PVC Insulation .009″[0.229] 18, 20, 22, 24
UL 1180 TEFLON Insulation — T.F.E. .015″[0.381] 22
UL 1213 TEFLON Insulation — T.F.E. 010″[0.254] 18, 22, 24
UL 1316 PVC/Nylon Wall .015″[0.381] 18, 22
UL 1429 Irradiated PVC — X.L.P.V.C. .010″[0.254] 18, 20, 22, 24
UL 1430 Irradiated PVC — X.L.P.V.C. .015″[0.381] 18, 20, 22, 24
UL 1569 PVC .015″[0.381] 18
UL 3265 Irradiated Polyethylene — X.L.P.E. .010″[0.254] 22
UL 3266 Irradiated Polyethylene — X.L.P.E. .015″[0.381] 18, 20, 22, 24
Note: When selecting approved wire styles noted on this list, the MTA Application Specifications guidelines must be
followed. Also, due to wire variations in insulation wall thickness, hardness and wire stranding we would recom-
mend evaluating the wire selected before final application approval.
TEFLON is a trademark of E.I. DuPont de Nemours and Company.
MTA-100 Ribbon Cable Preparation MTA-156 Ribbon Cable Preparation
† The dimensions shown represent the recommended minimum and maximum for notches;
the actual dimension will depend on your application requirements.
Notes:
1. Cable shall be notched, as indicated in the individual ribbon cable connector assembly drawing, according to the
requirements specified in these figures. Conductor shall not be exposed after notching, nor shall individual wire
stands be cut or nicked.
2. U.L. Style #2651 ribbon cable is approved for use with MTA-100 and MTA-156 connectors per Application
Specification 114-1031 and 114-1032.
Ribbon Cable
Cable Edge-to-End Alignment
(Ends of the cable shall be prepared as indicated in this figure)
.400-.800†
[10.16-20.32]
Feed-Thru NotchDead-End Notch
.036-.046 Standard
(.046-.052 Allowable for
26-28 AWG Wire Only)
.280-.450†
[7.112-11.43]
.036-.046 Standard
(.046-.052 Allowable for
26-28 AWG Wire Only)
.500-1.000†
[12.70-25.40]
Feed-Thru NotchFlush-Mount Notch
.400-.600†
[10.16-15.24]
.062-.080
[1.57-2.03]
.062-.080
[1.57-2.03]
.064 [1.63]
Typ. (Max.)
After Notching
.050 [1.27]
Dia. (Max.)
For Mass Terminating
.100
[2.54]
(Typ.)
Insulation
Conductor
Web
.094 [2.39]
Typ. (Max.)
After Notching
.070 [1.78]
Dia. (Max.)
For Mass Terminating
.156
[3.96]
(Typ.)
Insulation
Conductor
Web
Ribbon Cable End View
–A–
.010 A
Per Inch of Cable Width
Notes:
1. For MTA Cable Assemblies
Contact US Engineering
Cable Assembly Group.
2. For IDC Cable, see pages
71 thru 74.
MTA Wire Selection
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Product Facts
■Compatible with a variety
of Insulation Displacement
Connectors
■Available on .025 [0.63],
.0394 [1.00], .050 [1.27],
.100 [2.54] and .156 [3.96]
centerline
■Color code edge mark on
conductor #1
■Gray flame retardant
flexible PVC insulation
■Insulation rated for
temperature of
-20°C to +105°C
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E53793
R
Tyco Electronics Corporation
has an expanding array of
MADISON CABLE planar
PVC insulated product
designed for compatibility
with a variety of Insulation
Displacement Connectors.
AMP IDC terminations offer
a quick, reliable, cost-effec-
tive cabling system which
can be automated.
The .100 [2.54] centerline
cable is available in 28 to
22 AWG, either as tinned or
as overcoated tinned wire,
in 2 to 28 conductors.
The .156 [3.96] centerline
is available in 22 AWG and
18 AWG, either as tinned
or overcoated tinned, in
2 to 24 conductors.
IDC Ribbon Cable is
produced to tighter stan-
dards than usually required
for high yield insulation
displacement terminations.
The extra precision offers
uncomplicated operation in
fully automatic stripping,
notching and termination
equipment.
71
IDC
Ribbon Cable
.050 [1.27] Centerline, IDC Ribbon Cable
Product Specifications
Voltage Rating — 30 VAC
Component Recognized by UL to
US and Canadian Standards —
AWM Style 2651
Sizes —
26 AWG, 7/34 Tinned copper, PVC
insulation (9 – 64 conductors), 500-ft
reels (Base AMP Part Number 57034)
28 AWG, 7/36 Tinned copper, PVC
insulation (9 – 64 conductors), 100-ft
reels (Base AMP Part Number 57040)
and 500-ft reels (Base AMP Part
Number 971111)
30 AWG, Other conductor counts avail-
able on request. For ordering informa-
tion, call Toll-Free: 1-877-623-4766 or
visit: http://www.madisoncable.com/
fsproducts.htm
IDC Ribbon Cable
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
72
IDC
Ribbon Cable
No. of Dimensions Part
Conductors ABC
Number
28 AWG 7/32 Tinned Copper
2 0.100 [2.54] 0.200 [5.08] 0.044 [1.12] 02WFY00006P
5 0.400 [10.16] 0.500 [12.70] 0.044 [1.12] 05WFY00006P
10 0.900 [22.86] 1.000 [25.40] 0.044 [1.12] 10WFY00006P
15 1.400 [35.56] 1.500 [38.10] 0.044 [1.12] 15WFY00006P
20 1.900 [48.26] 2.000 [50.80] 0.044 [1.12] 20WFY00006P
25 2.400 [60.96] 2.500 [63.50] 0.044 [1.12] 25WFY00006P
28 2.700 [68.58] 2.800 [71.12] 0.044 [1.12] 28WFY00006P
26 AWG 7/34 Tinned Copper
2 0.100 [2.54] 0.200 [6.08] 0.039 [.99] 02WEY00008P
5 0.400 [10.16] 0.500 [12.70] 0.039 [.99] 05WEY00004P
10 0.900 [22.86] 1.000 [25.40] 0.039 [.99] 10WEY00012P
15 1.400 [35.56] 1.500 [38.10] 0.039 [.99] 15WEY00002P
20 1.900 [48.26] 2.000 [50.80] 0.039 [.99] 20WEY00008P
25 2.400 [60.96] 2.500 [63.50] 0.039 [.99] 25WEY00008P
28 2.700 [68.58] 2.800 [71.12] 0.039 [.99] 28WEY00008P
26 AWG 7/34 Overcoated Tinned Copper
2 0.100 [2.54] 0.200 [5.08] 0.039 [.99] 02WEY00007P
5 0.400 [10.16] 0.500 [12.70] 0.039 [.99] 05WEY00007P
10 0.900 [22.86] 1.000 [25.40] 0.039 [.99] 10WEY00007P
15 1.400 [35.56] 1.500 [38.10] 0.039 [.99] 15WEY00007P
20 1.900 [48.26] 2.000 [50.80] 0.039 [.99] 20WEY00007P
25 2.400 [60.96] 2.500 [63.50] 0.039 [.99] 25WEY00007P
28 2.700 [68.58] 2.800 [71.12] 0.039 [.99] 28WEY00007P
Other Conductor Counts Available on Request.
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
Edge Mark .100
[2.54]
Typ. Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — -20°C to +105°C
Flammability — UL: VW1
.010 [0.25]
.050 [1.27] Typ.
B
C
A
Contact MADISON CABLE (1-877-MADISON), a Division of
Tyco Electronics Corporation, for engineering questions or for
order placement of this cable.
24 AWG 7/32 Overcoated Tinned Copper
2 0.100 [2.54] 0.200 [5.08] 0.044 [1.12] 02WFY00007P
5 0.400 [10.16] 0.500 [12.70] 0.044 [1.12] 05WFY00007P
10 0.900 [22.86] 1.000 [25.40] 0.044 [1.12] 10WFY00007P
15 1.400 [35.56] 1.500 [38.10] 0.044 [1.12] 15WFY00007P
20 1.900 [48.26] 2.000 [50.80] 0.044 [1.12] 20WFY00007P
25 2.400 [60.96] 2.500 [63.50] 0.044 [1.12] 25WFY00007P
28 2.700 [68.58] 2.800 [71.12] 0.044 [1.12] 28WFY00007P
22 AWG 7/30 Tinned Copper
2 0.100 [2.54] 0.200 [5.08] 0.051 [1.30] 02WGY00001P
5 0.400 [10.16] 0.500 [12.70] 0.051 [1.30] 05WGY00006P
10 0.900 [22.86[ 1.000 [25.40] 0.051 [1.30] 10WGY00002P
15 1.400 [35.56] 1.500 [38.10] 0.051 [1.30] 15WGY00006P
20 1.900 [48.26] 2.000 [50.80] 0.051 [1.30] 20WGY00006P
25 2.400 [60.96] 2.500 [63.50] 0.051 [1.30] 25WGY00006P
28 2.700 [68.58] 2.800 [71.12] 0.051 [1.30] 28WGY00006P
No. of Dimensions Part
Conductors ABC
Number
.100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Edge Mark
.156
[3.96]
Typ. Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation
Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
.010
[0.25]
.078 [1.98] Typ.
B
A
C
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
No. of Dimensions Part
Conductors ABC
Number
22 AWG 7/30 Tinned Copper
2 0.156 [3.96] 0.312 [7.92] 0.051 [1.30] 02WGY00008P
5 0.624 [15.85] 0.780 [19.81] 0.051 [1.30] 05WGY00008P
10 1.404 [35.66] 1.560 [39.62] 0.051 [1.30] 10WGY00008P
15 2.184 [55.47] 2.340 [59.44] 0.051 [1.30] 15WGY00008P
20 2.964 [75.29] 3.120 [79.25] 0.051 [1.30] 20WGY00008P
24 3.588 [91.14] 3.744 [95.10] 0.051 [1.30] 24WGY00008P
18 AWG 7/26 Tinned Copper
2 0.156 [3.96] 0.312 [7.92] 0.068 [1.73] 02WJY000001P
5 0.624 [15.85] 0.780 [19.81] 0.068 [1.73] 05WJY000010P
10 1.404 [35.66] 1.560 [39.62] 0.068 [1.73] 10WJY000010P
15 2.184 [55.47] 2.340 [59.44] 0.068 [1.73] 15WJY000010P
20 2.964 [75.29] 3.120 [79.25] 0.068 [1.73] 20WJY000010P
24 3.588 [91.14] 3.744 [95.10] 0.068 [1.73] 24WJY000010P
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of
Tyco Electronics Corporation, for engineering questions or for
order placement of this cable.
73
IDC
Ribbon Cable
.156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
74
IDC
Ribbon Cable
In addition to bulk cable,
the US Engineering Cable
Assembly Group offers
Prepared Cable for the .100
[2.54] and .156 [3.96] cen-
terline cables. This can be
in the form of prenotched
cable on reels or cut-to-
length cable segments.
Prenotched 250 foot reels
of cable can be produced
with notches at varying
increments or repeating all
along the cable. The maxi-
mum width of these cables
is 20 conductor for the .100
[2.54] centerline and 13
conductor for the .156
[3.96] centerline.
Prepared Cable is also
available with a Strip and
Retain feature allowing the
cable assembly to be sol-
dered directly to the PC
Board. This saves space
and cost and reduces
spare parts inventory. Strip
and Retain on both ends is
used in family board appli-
cations to maintain the
electrical connection when
the PC Board is separated
into smaller boards after
soldering. Widths are limited
to 20 conductors for the
.100 [2.54] centerline and
13 conductors for the .156
[3.96] centerline. However,
multiple cables can be
placed side-by-side in a
single connector. For other
styles and configurations
contact the product engi-
neer or product manager.
Prepared IDC Ribbon Cable
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Insulation Strain Relief
Conductor
Insulation will be contained
within the confines of the
insulation strain relief as indicated
BMin.
A
Top of
Contact Conductor
Bare wires will not be visible
beyond back of housing
Centerline of Conductor
Back of Housing
Bare wires
will not extend
above top of contact
Choose the appropriate MTA Connector from the MTA Catalog 82056.
Select the proper wire style and AWG for the chosen MTA Connector
(Refer to pages 70-74).
Choose the MTA Termination Tooling (Refer to pages 76-79).
Terminate the Wire-to-MTA Connector per Application Tooling Instruction Sheet.
Inspect the MTA Wire Termination per Application Specification, especially the wire
depth. See illustrations: 114-13072 — MTA-50 Connectors, 114-1019 — MTA-100
Connectors, 114-1020—MTA-156 Connectors, Posted Connector, Card Edge,
114-1048 — MTA-156 Quad Connectors, 114-1031 — MTA-100 Ribbon Cable
Connector Assembly, and 114-1032 — MTA-156 Ribbon Cable Connector Assembly.
Adjust the Termination Tooling (if needed) per Tooling Instruction Sheet
(repeat the step above).
Connector AB
MTA-100 .069–.087 .040
[1.75-2.21] [1.02]
MTA-156 .090–.113 .060
[2.29-2.87] [1.52]
75
MTA Wire Termination
Flowchart
MTA Wire Termination Flowchart
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
76
Application
Tooling
Manual Arbor Frame (with slide)
Part Number 1583518-1*
Upper Tooling
Part Number 1583514-1*
Fixture, Discrete Wire, Closed End
Part Number 1583515-1 (28-26 AWG)
Part Number 1583515-2 (30-28 AWG)
Fixture, Discrete Wire, Feed-Thru
Part Number 1583516-1 (28-26 AWG)
Part Number 1583516-2 (30-28 AWG)
Fixture, Ribbon Cable, Closed End or
Feed-Thru
Part Number 1583517-1
*Required, plus appropriate Fixture(s).
One-At-A-Time Termination Tooling Part Numbers Note: Max. Insulation Outside Diameter Wire:
.060 [1.52] for MTA-100 Connectors /.095 [2.41] for MTA-156 Connectors
MTA-100 and MTA-156 Mass Termination Tooling Part Numbers Note: Max. Insulation Outside Diameter Wire:
.050 [1.27] for MTA-100 Connectors /.070 [1.78] for MTA-156 Connectors
Harness Board Holding Fixture Interchangeable Head
MTA Connector Interchangeable Head Used With and Tape Feed Track
Assembly Part Number Used With Part Number Applicator Tooling Part Number Used With
Assembly Assembly
Closed End ——
58242-1 — 854175-1 & 312522-1
58242-3 58575-1 854200-1 (Base)
Feed Thru 58644-1 (Discrete Wire)†58074-1 (Man Hd Tl) 58243-1 — ——
MTA-100 58644-2 (Notched Cable)†58243-3 58575-1
Connector Closed End ——
58635-1 58575-1 ——
(Posted)
Feed Thru ——
58636-1 58575-1 ——
(Posted)
Closed End ——
58244-1 — 854176-1 & 312522-1
58244-3 58576-1 854200-1 (Base)
Feed Thru 58646-1 (Discrete Wire)†† 58074-1 (Man Hd Tl) 58245-1 — ——
MTA-156
58646-2 (Notched Cable)†† 58245-3 58576-1
Connector Card Edge ——
59848-1 — ——
59848-3 58576-1
Closed End ——
58009-1 ———
(Posted) 58009-2 58576-1
Feed Thru ——58010-2 58576-1 ——
(Posted)
Manual Bench
Closed End ——
58244-1 — Tool 58024-1 ——
58244-3 58576-1 and Tooling
MTA-156 Assy 58040-1
Quad
58245-1 — 58024-1 and
Feed Thru —— Tooling Assy ——
58245-3 58576-1 58040-1
†2- through 12-positions. ††2- through 8-positions.
Manual Bench
Tool 58024-1
and Tooling
Assembly
58039-1
Manual Bench
Tool 58024-1
and Tooling
Assembly
58040-1
Interchangeable Head and Interchangeable Head and
Interchangeable Head Loose-Piece Feed Track Tape Feed Track T-Handle✔
MTA Connector Manual Hand Tool 58074-1 Air Bench Mount Air Bench Mount Special Maintenance
Assembly Air Hand Tool 58075-1 Tool 58338-1 Tool 58338-1 Applicator Tool
Air Bench Mount Tool 58338-1 Electric Bench Electric Bench
Electric Bench Machine 931800-1 Machine 931800-1 Machine 931800-1
MTA-50 Closed End 1583503-1 ————
Feed Thru
Closed 58246-1 (Standard)*n853546-1 & 853542-1
End 58246-2 (Ext Wear)*933567-1 466728-1 59803-1
MTA-100 58246-3 (Ribbon Cable) (Base)
Connector Feed Thru 58442-1 ———59803-1
Posted 58638-1 ———59803-1
(Closed-End)
Closed 58247-1 (Standard)** 853547-1 & 853542-1
End 58247-2 (Ext Wear) 933568-1 466727-1 59804-1
MTA-156 58247-3 (Ribbon Cable) (Base)
Connector Feed Thru 58443-1 ———59804-1
Posted 58082-1 ———59804-1
(Closed-End)
MTA-156 Closed 58061-1 ——567020-1 59839-1
Card-Edge End
MTA-156 Closed 58392-1 ———59804-1
Quad End
*Repair Kit 856600-1 **Repair Kit 856600-2
Notes:
1. A repair kit consists of a cam,
a feed-slide sub-assembly
and a locating pawl.
Repair kits can be made
available for other inter-
changeable heads. Consult
Tyco Electronics.
2. Standard modular heads
58246-1 and 58247-1 are
recommended for low
volume use.
3. Extended wear modular
heads 58246-2 and 58247-2
are recommended for high
volume use.
4. T-Handle Maintenance Tools
are for maintenance (field)
use only. They are not rec-
ommended for production.
5. Some Manual Hand Tool
Assemblies are available:
a. Order 58579-1, comprised
of Head 58246-1 with
Manual Hand Tool 58074-1.
b. Order 58580-1, comprised
of Head 58247-1 with
Manual Hand Tool 58074-1.
c. Order 58639-1, comprised
of Head 58638-1 with
Manual Hand Tool 58074-1.
MTA-50 Mass Termination Tooling Part Numbers
MTA Application Tooling Options
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Interchangeable Head
■Terminates one
unstripped wire per cycle
■Aligns and holds the
connector in place for
each termination
■Automatically advances
the connector after each
termination
Interchangeable Head and
Loose-Piece Feed Track
■No special setup required
■Connectors are easily
loaded into feed track
■Connectors are fed using
a simple spring-loaded
pusher
Interchangeable Head and
Tape Feed Track
■No special setup required
■Tape-mounted connectors
are transferred from prod-
uct reel to feed track by
simply pulling on the free
end of the carrier tape
■Connectors are fed using
a simple spring-loaded
pusher
Special Applicator
■Connectors are easily
hand loaded into feed
track
■Automatically advances
the connector after each
termination
■Cannot be cycled until
the connector is properly
positioned
Manual Hand Tool with
Interchangeable Head
Air Bench Mount Tool with
Interchangeable Head and
Foot Switch
Air Hand Tool with
Interchangeable Head Electric Bench Machine with
Interchangeable Head
One-At-A-Time Termination
Tooling (Typical Tooling
Combinations)
Air Bench Mount Tool with
Interchangeable Head and Loose-Piece Feed Track
Electric Bench Machine with
Interchangeable Head and
Tape Feed Track
AMP-O-LECTRIC Bench
Machine with Special Applicator
Power Units
Manual Hand Tool —
Pistol Grip Handle
Part No. 58074-1
■Easy to use
■Ratchet control will not
release the trigger until it
is fully bottomed
■Head may be rotated for
user convenience
Air Hand Tool —
Pistol Grip Pneumatic Handle
Part No. 58075-1
■Light weight
■Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
■Head may be rotated for
user convenience
Air Bench Mount Tool —
Bench Mount Power Assembly
Part No. 58338-1
■May be mounted with
interchangeable head
pointed up or down
■Operated by a foot
switch
■Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
Electric Bench Machine —
IDC Power Unit
Part No. 931800-1
■All electric: 120 VAC,
60 Hz, 2 A
■Compact, portable and
quiet
■Operated by a foot
switch
T-Handle Maintenance Tool
Interchangeable Heads and Applicators (Refer to page 76 for part numbers.)
77
Application
Tooling
MTA Application Tooling Options (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
78
Application
Tooling
Applicator and Holding Fixture
■Wires are laced into
plastic combs for mass
termination
■Trims excess wire for
closed-end terminations
■Holding fixture may be
mounted to a harness
board
Applicator and Tape Feed Track
■Tape-mounted connectors
are transferred from prod-
uct reel to feed track by
simply pulling on the free
end of the carrier tape
■Connectors are fed using
a simple spring-loaded
pusher
■Feed stop easily adjusted
for different connector
sizes
■Notch cable with up to
28 conductors for .100
centerline, and 24
conductors for .156
centerline
■Pressure plate holds
cable in position during
notching
■Scrap conveniently
removed through a chute
with a blast of air from a
built-in air valve
Mass Termination Tooling
(Typical Tooling
Combinations)
Manual Bench Tool with
Applicator and Holding Fixture
Manual Bench Tool with Applicator and Tape Feed Track
Air Bench MachineAir Harness Tool with
Applicator
Ribbon Cable Notcher
Assembly
2700 lb Air Bench Machine with
Ribbon Cable Notcher Assembly
Power Units
Manual Bench Tool —
Arbor Frame Assembly
Part No. 58024-1
■Applicator and holding
fixture can be oriented for
operator convenience for
closed-end or feed-thru
terminations
■Ram height (insertion
depth) is easily adjusted
■May be bench mounted
Air Harness Tools —
Hand-Held Power Unit
with Applicator
Part No. 58575-1 (MTA-100)
Part No. 58576-1 (MTA-156)
■Applicator can be rotated
360° for orientation with
holding fixture
■Insertion depth is easily
adjusted
■Operates at air pressure
between 75 and 95 psi
[5.17 and 6.55 bar]
Air Bench Machine —
Pneumatic Unit
Part No. 91112-2
■Operated by a foot
switch
■Operates at air pressure
between 80 and 90 psi
[5.52 and 6.21 bar]
■Not recommended for
notching cable with more
than 14 conductors
2700 lb Air Bench Machine —
Part No. 312522-1
■Operated by a foot
switch
■Capable of exerting
2,700 lb [12,000 N] of
force at minimum 80 psi
[5.52 bar] air pressure
■May be bench mounted
Applicators and Notcher Assemblies
Ribbon Cable Notcher Assembly
Part Number Wire Size Centerline Used With
AWG
854449-2 26-28 .100 Manual Bench Tool
2.54 58024-1
854449-4 22-28 .100 Air Bench Machine
2.54 91112-2
2700 lb Bench Machine
.156 312522-1
854449-3 18-24 3.96 AMP-O-LECTRIC
Bench Machine 1-471273-3
(with Conversion Kit 690675-2)
Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC
Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb
Air Bench Machine.
MTA Application Tooling Options (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Hand Tools, Power Units & Accessories
Manual Arbor Frame (MTA-50) 1583518-1 IS 408-8812 2700 lb Air Bench Machine 312522-1 CM 409-5843
Upper Tooling (MTA-50) 1583514-1 IS 408-8812 Terminator Assembly, "G" Term 354500-1 CM 409-5842
Manual Arbor Frame Assembly 58024-1 IS 408-6923 AMP-O-LECTRIC Bench Machine 1-471273-3 CM 409-5128
Ribbon Cable Applicator, .100 58039-1 IS 408-6685 Conversion Kit 690675-2 IS 408-8022
Ribbon Cable Applicator, .156 58040-1 IS 408-6701 Base Assembly 853542-1 IS 408-9636
Manual Hand Tool 58074-1 IS 408-6790 Base 854200-1 IS 408-9650
Air Bench Mount Tool 58338-1 IS 408-9393 Adapter (AMP-O-LECTRIC) 854468-1 IS 408-9687
Air Hand Tool (MTA-100) 58575-1 IS 408-4260 Adapter (2700 lb Machine) 854468-2 IS 408-9687
Air Harness Tool (MTA-156) 58576-1 IS 408-4260 Repair Kit 856600-1 IS 408-9745
T-Handle Maintenance Tool (MTA-100) 59803-1 IS 408-7907 Repair Kit 856600-2 IS 408-9745
T-Handle Maintenance Tool (MTA-156) 59804-1 IS 408-7907 Electric Bench Mount Tool 931800-1 CM 409-5746
Air Arbor Frame Assembly 91112-2 IS 408-7763
One-At-A-Time Termination Tooling
Interchangeable Heads Interchangeable Head & Loose Piece Feed Track
MTA-50 MTA-156 MTA-100 MTA-156
1583503-1 IS 408-8801 58247-1 IS 408-6930 933567-1 IS 408-9435 933568-1 IS 408-9466
MTA-100 58247-2 IS 408-9380 Interchangeable Heads & Tape Feed Track
58246-1 IS 408-6929 58247-3 IS 408-4146 MTA-100 MTA-156
58246-2 IS 408-9379 58443-1 IS 408-9607 853546-1 IS 408-9636 853547-1 IS 408-9637
58246-3 IS 408-4147 58061-1 IS 408-6794 Special Applicators
58442-1 IS 408-9603 58082-1 IS 408-6795
MTA-100 MTA-156
58638-1 IS 408-4358 58392-1 IS 408-9450
466728-1 AI 408-8054 466727-1 AI 408-8054
567020-1 AI 408-8069
Mass Termination Tooling
Die Set Assembly
MTA-50 MTA-100 MTA-156 MTA-100
1583515-1 IS 408-8812 58242-1 IS 408-7994 58009-1 IS 408-7995 854175-1 IS 408-9667
1583515-2 IS 408-8812 58242-3 IS 408-7994 58009-2 IS 408-7995
1583516-1 IS 408-8812 58243-1 IS 408-7994 58010-2 IS 408-7995 MTA-156
1583516-2 IS 408-8812 58635-1 IS 408-7994 58244-1 IS 408-7995 854176-1 IS 408-9650
1583517-1 IS 408-8812 58636-1 IS 408-7994 58244-3 IS 408-7995
58644-1 IS 408-4406 58245-1 IS 408-7995
58644-2 IS 408-4440 58245-3 IS 408-7995
59844-1 IS 408-7994 58646-1 IS 408-4405
59845-1 IS 408-7994 58646-2 IS 408-4439
59845-3 IS 408-7994 59848-1 IS 408-7995
59848-3 IS 408-7995
Technical Documents
Typical Application Rates
The following is a list of technical documents covering the installation, operation, adjustment,
maintenance and repair of MTA application tooling.
Instruction Sheets (IS) provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
Customer Manuals (CM) provide complete, detailed instructions on the installation, operation,
adjustment, maintenance and repair of complex tools and application machines.
Applicator Instructions (AI) are similar to instruction sheets (which cover products and tools), and
provide instructions for installation, adjustment and maintenance of applicators used in auto-
matic and semiautomatic machines.
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Discrete Wire
Method Terminations
Per Hour
Manual Hand Tool 58074-1 with
Interchangeable Head 58246-1 —
Electric Bench Machine 931800-1 with
Interchangeable Head 58246-1 900
Electric Bench Machine 931800-1 with
Interchangeable Head and
Loose-Piece Feed Track 933567-1
1,100
Electric Bench Machine 931800-1 with
Interchangeable Head and Tape Feed Track
853546-1 and 853542-1 (Base)
1,250
Apply One 4-Position MTA-100 Feed-Thru
Connector per Assembly, Discrete Wire
Method Terminations
Per Hour
Manual Bench Tool 58024-1 with
Applicator and Holding Fixture 650
For further information about tooling call Technical Support.
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Ribbon Cable*
Method Terminations
Per Hour
2700 lb Air Bench Machine 312522-1 with
Applicator and Tape Feed Track
854175-1 and 854200-1 (Base)
7,500
* Procedure: Mass terminate 12-conductor ribbon cable with three
connectors per end. After terminating, separate by tearing the
12-conductor assembly into three 4-conductor assemblies.
Cable Notching
Method Cable Ends
Per Hour
2700 lb Air Bench Machine 312522-1 with
Ribbon Cable Notcher Assembly 854449-2
and 854468-2 (Adapter)
1,000
79
Application
Tooling
MTA Application Tooling Options (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
641187 17
641188 17
641189 17
641190 15
641191 15
641192 15
641193 15
641198 15
641199 15
641200 15
641201 15
641202 46
641203 46
641204 47
641207 49
641208 48
641209 48
641210 49
641211 21
641212 21
641213 23
641214 23
641215 24
641216 24
641217 37
641218 37
641219 37
641220 37
641221 37
641222 37
641223 37
641224 37
641225 37
641226 37
641227 39
641228 39
641229 39
641230 39
641231 39
641232 39
641233 39
641234 39
641235 39
641236 39
641237 15
641238 15
641239 15
641240 15
641241 15
641242 15
641243 15
641244 15
641283 56
641284 56
641285 56
641286 56
641287 56
641288 56
641289 56
641290 56
641291 56
641292 56
Part No. Page
02WEY00007P 72
02WEY00008P 72
02WFY00006P 72
02WFY00007P 72
02WGY00001P 72
02WGY00008P 73
02WJY000001P 73
05WEY00004P 72
05WEY00007P 72
05WFY00006P 72
05WFY00007P 72
05WGY00006P 72
05WGY00008P 73
05WJY000010P 73
10WEY00007P 72
10WEY00012P 72
10WFY00006P 72
10WFY00007P 72
10WGY00002P 72
10WGY00008P 73
10WJY000010P 73
15WEY00002P 72
15WEY00007P 72
15WFY00006P 72
15WFY00007P 72
15WGY00006P 72
15WGY00008P 73
15WJY000010P 73
20WEY00007P 72
20WEY00008P 72
20WFY00006P 72
20WFY00007P 72
20WGY00006P 72
20WGY00008P 73
20WJY000010P 73
24WGY00008P 73
24WJY000010P 73
25WEY00007P 72
25WEY00008P 72
25WFY00006P 72
25WFY00007P 72
25WGY00006P 72
28WEY00007P 72
28WEY00008P 72
28WFY00006P 72
28WFY00007P 72
28WGY00006P 72
57034 71
57040 71
350980 59, 60
640250 60
640251 60
640252 59, 60
640383 46
640384 46
640385 47
640387 49
640388 48
640389 49
640426 37
640427 37
640428 37
640429 37
640430 37
640431 37
640432 37
640433 37
640434 37
640435 37
640440 15
640441 15
640442 15
640443 15
640445 48
640452 21
640453 21
640454 23
640455 23
640456 24
640457 24
640468 15
640469 15
640470 15
640471 15
640472 37
640473 37
640474 37
640475 37
640476 37
640477 37
640478 37
640479 37
640480 37
640481 37
640550 16
640551 40
640556 41
640557 41
640558 41
640559 41
640595 39
640599 39
640600 39
640601 39
640602 39
640604 39
640605 39
640606 39
640607 39
640608 39
640620 15
640621 15
640622 15
640623 15
640629 42
640630 42
640631 41
640632 41
640633 41
640634 41
640635 41
640636 17
640637 17
640638 17
640639 17
640642 16
640643 40
640706 59
640707 59
640708 17
640709 17
640859 56
640860 56
640861 56
640862 56
640863 56
640864 56
640865 56
640866 56
640867 56
640868 56
641101 57
641106 57
641113 46
641114 46
641115 47
641118 49
641119 48
641120 48
641121 49
641122 21
641123 21
641124 23
641125 23
641126 24
641127 24
641143 41
641144 41
641145 41
641146 41
641147 41
641148 37
641149 37
641150 37
641151 37
641152 37
641153 37
641154 37
641155 37
641156 37
641157 37
641168 39
641169 39
641170 39
641171 39
641172 39
641173 39
641174 39
641175 39
641176 39
641177 39
641186 17
Part No. Page
80
Note: This index lists all cataloged parts
by base no. only. Complete part nos.
(with prefixes and/or suffixes) are shown
on the page(s) indicated.
Part Number Index
Part No. Page
Part No. Page
Part Number Index
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
641293 57
641301 39
641302 39
641303 39
641304 39
641305 39
641306 39
641307 39
641308 39
641309 39
641310 39
641311 15
641312 15
641313 15
641314 15
641425 45
641426 45
641427 45
641428 45
641429 45
641435 45
641436 45
641437 45
641438 45
641439 45
641440 42
641522 45
641523 45
641524 45
641525 45
641526 45
641533 42
641534 15
641535 15
641536 15
641537 15
641550 59
641623 42
641643 17
641644 17
641645 17
641646 17
641653 15
641654 15
641655 15
641656 15
641994 17
643067 40
643071 40
643075 16
643077 16
643498 15
643813 15
643814 15
643815 15
643816 15
643817 37
643818 37
643819 37
643820 37
643821 37
643828 15
643995 45
644020 15
644038 15
644040 15
644042 15
644043 15
644044 15
644082 37
644083 15
644284 37
644312 15
644313 15
644329 55
644370 55
644371 55
644375 55
644376 55
644377 55
644381 55
644382 55
644383 55
644387 55
644388 55
644389 55
644456 22
644457 22
644460 37
644461 37
644462 37
644463 37
644464 37
644465 39
644466 39
644467 39
644468 39
644469 39
644470 39
644471 39
644472 39
644486 30
644487 30
644488 30
644489 30
644497 15
644501 37
644502 37
644508 55
644509 55
644510 55
644511 15
644512 15
644513 15
644514 15
644540 15
644563 15
644564 15
644565 15
644566 37
644567 39
644569 39
644570 39
644572 39
644574 15
644575 15
644576 15
644577 15
644578 15
644579 15
644611 50
644612 50
644613 51
644614 51
644615 50
644616 50
644617 51
644627 50
644628 50
644629 51
644630 51
644631 50
644632 50
644633 51
644662 37
644663 37
644687 37
644694 22
644695 22
644702 15
644718 39
644720 39
644726 15
644749 46
644750 46
644751 47
644752 48
644753 48
644754 49
644755 49
644756 46
644757 46
644758 47
644759 48
644760 48
644761 49
644762 49
644763 46
644764 46
644765 47
644766 48
644767 48
644768 49
644769 49
644783 37
644791 37
644795 15
644803 30
644807 45
644809 45
644812 45
644814 45
644860 37
644861 30
644874 24
644875 24
81
Part Number Index
Part No. Page Part No. Page Part No. Page
644876 23
644877 23
644878 37
644884 22
644885 22
644886 22
644887 22
644888 22
644889 22
644890 22
644891 22
644892 32
644893 32
644894 32
644896 32
644897 32
644898 32
647000 20
647001 20
647002 20
647003 20
647004 20
647005 20
647006 20
647007 20
647008 20
647009 20
647010 20
647011 20
647012 20
647013 20
647014 20
647015 20
647016 20
647017 20
647018 20
647019 20
647020 20
647021 20
647022 20
647023 20
647030 20
647031 20
647032 20
647033 20
647047 27
647048 27
647050 28
647051 28
647075 27
647076 27
647078 28
647079 28
647106 29
647107 29
647108 29
647109 27
647114 27
647116 28
647117 28
647123 53
647124 53
Part No. Page
Part Number Index (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
647125 53
647126 53
647127 53
647128 53
647131 53
647132 53
647133 53
647134 53
647135 53
647136 53
647139 53
647140 53
647141 53
647142 53
647143 53
647144 53
647166 29
647167 29
647168 29
647295 28
647296 28
647297 28
647298 27
647299 27
647300 27
647400 62
647401 62
647402 62
647406 62
647409 62
647466 62
647476 45
647477 15
647478 37
647479 39
647480 15
647481 45
647485 62
647496 39
647497 45
647609 25
647623 25
647624 25
647625 25
647626 25
647627 25
647628 26
647629 26
647630 26
647646 47
647648 52
647649 52
647651 26
647652 26
647653 26
647676 65
647689 65
647690 64
770258 59
770476 59, 60
770522 59
770849 60
770894 61
971111 71
1123721 64
1123722 64
58009 76, 79
58010 76, 79
58024 76, 78, 79
58039 76, 79
58040 76, 79
58061 76, 79
58074 76, 77, 79
58075 76, 77
58082 76, 79
58242 76, 79
58243 76, 79
58244 76, 79
58245 76, 79
58246 76, 79
58247 76, 79
58338 76, 77, 79
58392 76, 79
58442 76, 79
58443 76, 79
Part No. Page
82
Part Number Index
Part No. Page Part No. Page
1123723 65
1123724 68
1123823 69
1123824 69
1318300 65
1318301 68
1318831 69
1318912 64
1375819 31
1375820 31
1445120 9
1445121 10
1445123 9
1445124 10
1445125 9
1445126 10
1445169 9
1445170 9
1445171 9
1445172 10
1445173 10
1445174 10
1445336 31
1445341 7
1445342 7
1445343 7
1445344 7
1445345 7
1445346 7
1445347 7
1445348 7
1445349 7
1445350 7
Part No. Page
1445351 7
1445352 7
1445353 7
1445354 7
1445355 7
1445356 7
1445357 7
1445358 7
1445359 5
1445360 5
1445361 5
1445362 5
1445363 5
1445364 5
1445365 5
1445366 5
1445367 5
1445368 5
1445369 5
1445370 5
1445371 5
1445372 5
1445373 5
1445374 5
1445375 5
1445376 5
1744017 48
1744020 15
1744036 67
1744037 67
1744048 67
1744055 66
1744056 66
Part No. Page
Application Tooling Part Number Index
58517 31
58575 76, 78, 79
58576 76, 78, 79
58579 76
58614 59
58635 76, 79
58636 76, 79
58638 76, 79
58639 76
58644 76, 79
58646 76, 79
59803 76, 79
59804 76, 79
59836 17
59837 41
59839 76
59845 79
59848 76, 79
90471 59
Part No. Page
91112 78, 79
91579 64
312522 76, 78, 79
354500 79
466468 59
466727 76, 79
466728 76, 79
466747 17
466947 59
471273 78, 79
567020 76, 79
567373 31
567827 31
567828 59
567910 31
680211 59
690675 78, 79
853542 76, 79
853546 76, 79
Part No. Page
853547 76, 79
854175 76, 79
854176 76, 79
854200 76, 79
854449 78
854468 78, 79
856600 76, 79
931800 76, 77, 79
933567 76, 79
933568 76, 79
1385286 64
1583503 76, 79
1583514 76, 79
1583515 76, 79
1583516 76, 79
1583517 76, 79
1583518 76, 79
Part No. Page
Part Number Index (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
Tyco Electronics Corporation www.tycoelectronics.com
Americas
Asia/Pacific
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-2103-6000
Fax: +55-11-2103-6030
Chile – Santiago
Phone: +56-2-345-0361
Fax: +56-2-223-1477
Canada – Toronto
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
Phone: +905-470-4425
Fax: +905-474-5525
Colombia – Bogota
Phone: +57-1-319-8959
Fax: +57-1-319-8960
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax: +52-55-1106-0901
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Australia – Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India – Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia – Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan – Kawasaki, Kanagawa
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Korea – Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia – Selangor
Phone: +60-3-7805-3055
Fax: +60-3-7805-3066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines – Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-21-2407-1588
Fax: +86-21-2407-1599
Singapore – Singapore
Phone: +65-6482-0311
Fax: +65-6482-1012
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax: +886-2-8768-2268
Thailand – Bangkok
Phone: +66-2-955-0500
Fax: +66-2-955-0505
Vietnam – Ho Chi Minh City
Phone: +84-8-930-5546
Fax: +84-8-930-3443
United States
Harrisburg, PA
Phone: +1-717-564-0100
Fax: +1-717-986-7575
Product Information Center:
Phone: +1-800-522-6752
Fax: +1-717-986-7575
Troy, MI
Phone: +1-248-273-3359
Fax: +1-248-273-3322
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1-905-60-0
Fax: +43-1-905-60-1333
Product Information Center:
Phone: +43-1-905-60-1249
Fax: +43-1-905-60-1251
Belarus – Minsk
Phone: +375 17 237 47 94
Fax: +375 17 237 47 94
Belgium – Kessel-Lo
Phone: +32-16-352-300
Fax: +32-16-352-355
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic and Slovakia
Czech Republic – Kurim
Phone: +420-541-162-111
Fax: +420-541-162-223
Product Information Center:
Phone: +420-541-162-113
Fax: +420-541-162-132
Denmark – Glostrup
Phone: +45-43-48-04-00
Fax: +45-43-44-14-14
Egypt – Cairo
Phone: +202-419-2334
Fax: +202-417-7647
Estonia – Tartu
Phone: +372-5138-274
Fax: +372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France – Cergy-Pontoise Cedex
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
Phone: +33-1-3420-8686
Fax: +33-1-3420-8623
France Export Divisions –
Cergy-Pontoise Cedex
Phone: +33-1-3420-8804
Fax: +33-1-3420-8699
Germany – Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Greece – Athens
Phone: +30-210-9370-396/397
Fax: +30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Product Information Center:
Phone: +36-1-289-1016
Fax: +36-1-289-1017
Ireland – Dublin
Phone: +353-1-866-5612
Fax: +353-1-866-5714
Israel – Petach-Tikva
Phone: +972-3-929-0999
Fax: +972-3-919-1088
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031-116
Product Information Center:
Phone: +39-011-4012-428
Fax: +39-011-40-287-428
Lithuania and Latvia
Lithuania – Vilnius
Phone: +370-5-213-1402
Fax: +370-5-213-1403
Product Information Center:
Phone: +370-5-211-3016
Fax: +370-5-213-1403
Netherlands – ’s-Hertogenbosch
Phone: +31-73-6246-246
Fax: +31-73-6212-365
Product Information Center:
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-88-50
Fax: +47-66-77-88-55
Poland – Warsaw
Phone: +48-22-4576-700
Fax: +48-22-4576-720
Product Information Center:
Phone: +48-22-4576-704
Fax: +48-22-4576-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax: +40-21-312-0574
Russia – Moscow
Phone: +7-495-790-7902
Fax: +7-495-721-1893
Product Information Center:
Phone: +7-495-790-7902-404
Fax: +7-495-790-7902-401
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax: +7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa – Port Elizabeth
Phone: +27-41-503-4500
Fax: +27-41-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
+90-212-282-5130/5430
Fax: +90-212-281-8184
Ukraine – Kiev
Phone: +380-44-206-2265
Fax: +380-44-206-2264
Product Information Center:
Phone: +380-44-206-2265
Fax: +380-44-206-2264
United Kingdom –
Stanmore, Middlesex
Phone: +44-8706-080208
Fax: +44-208-954-6234
Product Information Center:
Freephone (UK only):
+0800-267-666
Phone: +44-8706-080208
Fax: +44-208-420-8095
Global Contacts
Tyco Electronics Corporation
Harrisburg, PA
82056–10K–MS–FP–6-08–OG3B
