MJH Series: (.498 Height) Non-Shielded, Partially Shielded Performance Specifications Materials and Finish Housing: Shielding: Contacts: Glass filled polyester, UL 94V-0 rated, black Copper alloy plated with 90 in tin Phosphor bronze, gold plated over nickel in mating area with SnPb terminals over nickel Mechanical Characteristics Durability: 1000 mating cycles Electrical Characteristics Current/Voltage: Dielectric Withstanding Voltage: Insulation Resistance: Contact Resistance: Features * * * * * .498 Height Meets FCC requirements UL and C-UL approved E145613 6, 8, and 10 positions Non-shielded and partially shielded 150 Vac at 1.5 amps maximum, at 25C 1000 Vac RMS minimum, 60 Hz 500 megaohms minimum 30 milliohms maximum Dimensions & PCB Layout MJH Non-Shielded 6 Positions -- Shown without panel stops 13.21 [.520] 2.54 [.100] 12.65 [.498] 7.73 [.304] 2.54 [.100] 1.27 [.050] O0.890.70 [O.0350.028]X6 O3.180.70 .64 [.025] [O.1250.028]X2 8.89 [.350] 18.03 [.710] 10.16 [.400] 3.50 [.138] 3.300.30 [.1300.012] 10.160.13 [.4000.005] Recommended tolerance 0.05 unless noted. PCB thickness 0.6 mm (0.063"). 12 Catalog MCMJ74a 03/04 Edition 3 www.erni.com MJH Series:(.498 Height) Non-Shielded, Partially Shielded Dimensions & PCB Layout MJH Non-Shielded 8 Positions -- Shown without panel stops 1 3 8 6 4 5 2.54 [.100] 2 8.89 [.350] 11.430.13 [.450.005] 0.64 [.025] 1.27 [.050] 2.54 [.100] 8 7 O3.250.07 [O.1280.003] X2 1 15.24 [.600] 3.650.25 [.144.010] 3.51 [.138] 12.65 [.498] 18.03 [.710] O0.890.07 [O.0350.003]X8 1 11.43 [.450] 8 Recommended tolerance 0.05 unless noted. PCB thickness 0.6 mm (0.063"). www.erni.com Catalog MCMJ74a 03/04 Edition 3 www.erni.com Catalog MCMJ74 Rev. 09/02 13 MJH Series: (.498 Height) Non-Shielded, Partially Shielded Dimensions & PCB Layout MJHS- Shielded 8 Positions -- Shown with panel stop, PC ground and shield 16.00 [.630] 11.43 [.450] 18.03 [.710] 2.36 [.093] 12.65 [.498] 8.89 [.350] 16.76 [.660] TOP OF PCB LP O3.250.07 [O.128.003] X2 13.70 [.539] 0.380.10 [.015.004] 1 3.05 [.120] 8 1.27 [.050] RECOMMENDED PANEL CUTOUT 8.89 [.350] 0.64 [.025] 2.54 [.100] O0.890.07 [O.035.003] X8 3.50 [.138] 2.54 [.100] 2.54 [.100] 3.81 [.150] 0.51 [.020] 17.78 [.700] O1.600.07 [O.063.003] X2 11.43 [.450] 15.75 [.620] Recommended tolerance 0.05 unless noted. PCB thickness 0.6 mm (0.063"). 14 Catalog MCMJ74a 03/04 Edition 3 www.erni.com MJH Series: (.498 Height) Non-Shielded, Partially Shielded Ordering Information 6 positions 8 positions 10 positions Part No. 6 contacts 8 contacts 10 contacts Catalog MCMJ74a 03/04 Edition 3 Non-Shielded 133635 Shielded w/panel stops 133137 Non-Shielded 133691 Non-Shielded w/panel stops 133495 Partial Shield w/panel stops 133538 Partial Shield w/panel stops 133143 www.erni.com 15