Finisar Product Specification Analog Receiver, Pigtailed, PIN ROSA PIN-1310-5I-50SMF-FCUPC PRODUCT FEATURES * High performance InGaAs PIN photodiode * Wide operating temperature (-40C to 85C) * 1260-1600 wavelength response * Pigtailed package * Data rates up to 6GHz analog bandwidth APPLICATIONS CATV analog receiver, satellite distribution networks, analog video The PIN-1310-5I-50SMF-FCUPC is a high-performance InGaAs PIN photo-detector packaged to meet performance requirements of analog fiber applications. The TO-46 component can is mounted inside an ultem coaxial package which is then pigtailed with a single-mode fiber and terminated with a fiber connector. The pigtail is 50cm long as standard, terminated with an FC/UPC connector. Other pigtail lengths or connector styles may be available - please contact your regional sales manager. Applications include CATV and other analog network applications. PRODUCT SELECTION Part Number PIN-1310-5I-50SMF-FCUPC Description 1310 nm PIN Diode, 50cm single-mode pigtailed package, FC UPC connector Confidential and Proprietary (c) 2012 Finisar Corporation. All rights reserved Rev. A1 Page 1 PIN-1310-5I-50SMF-FCUPC Product Specification - April 2013 Finisar I. Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to +85C Case Operating Temperature -40* to +85C Lead Solder Temperature 260C, 10 sec. PIN Reverse Voltage 10V PIN forward current 2mA ESD Exposure (Human Body Model) 50V1 Incident Optical Power +6dBm average, +10dBm Peak Notice Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Confidential and Proprietary (c) 2012 Finisar Corporation. All rights reserved Rev. A1 Page 2 Finisar PIN-1310-5I-50SMF-FCUPC Product Specification - April 2013 II. Electro-Optical Characteristics Parameters Responsivity Capacitance Wavelength Response Dark Current PIN -3dB Bandwidth Rise/Fall Time Maximum Fiber Input Power Optical Return Loss Test Condition 1310nm, Vr=5V F-100kHz Vr=5V Into 50, -5V bias Po 0.1mWp-p =1310nm Symbol R C RESP Idark BW TR/TF Pmax ORL Min. 0.8 0.2 1260 Typ. 0.85 0.35 1310 6 7 50 3 23 Max. 0.45 1600 5 100 Units mA/mW pF nm nA GHz ps mW dB Notes: 1. Responsivity is for the entire pigtailed assembly, measured at 1310nm. 2. Capacitance is measured at 5V reverse bias. The PIN structure is fully depleted at less than 2V reverse bias. 3. Photodiode may respond to wavelengths outside this range, but is not guaranteed to do so. 4. Bandwidth is measured using small signal analysis. 5. The rise and fall times are measured using a laser source with transition times less than 30ps (20-80%), and an average power of 0.5mW. Confidential and Proprietary (c) 2012 Finisar Corporation. All rights reserved Rev. A1 Page 3 Notes 1 2 3 4 5 Finisar PIN-1310-5I-50SMF-FCUPC Product Specification - April 2013 III. Environmental Specifications Parameter Case Operating Temperature Storage Temperature V. Symbol Top Tsto Min -40 -40 Typ Max 85 85 Units C C Ref. Mechanical Specifications (dimensions are in mm) Confidential and Proprietary (c) 2012 Finisar Corporation. All rights reserved Rev. A1 Page 4 Finisar PIN-1310-5I-50SMF-FCUPC Product Specification - April 2013 VI. Revision History Revision Date A1 4/13/2013 VII. Description * Document created. For More Information Finisar Corporation 1389 Moffett Park Drive Sunnyvale, CA 94089-1133 Tel. 1-408-548-1000 Fax 1-408-541-6138 sales@finisar.com www.finisar.com Confidential and Proprietary (c) 2012 Finisar Corporation. All rights reserved Rev. A1 Page 5