3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
For technical, sales or ordering information call
800-225-5373
3M™ CP2 Press-Fit Header
2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series
• 25 mm basic system unit
• 38, 44 and 50 mm module
• 2 mm grid spacing allows for high signal density at low cost
• “Eye of the Needle” compliant pin press-t design reduces manufacturing
time and cost
• Three contact mating levels for Early Mate Late Break or “Hot Swap”
applications reduces manufacturing time and cost
• Feed through termination available for midplane applications
• Additional grounding rows available for improved ground bounce and
EMI immunity
• Mates with 5-row 3M™ HSHM, UHM, and CP2 Sockets
• End-to-end stackable with 5-row 3M™ HSHM, HM and CP2 Headers
• See the Regulatory Information Appendix (RIA) in the “RoHS compliance”
section of www.3Mconnectors.com for compliance information
(RIA E1 & C1 apply)
Date Modified: July 16, 2015 TS-2263-B
Sheet 1 of 7
Physical
Insulation:
Material: Glass Filled Polyester (PBT)
Flammability: UL94V-0
Contact:
Material: Copper Alloy
Plating: See Ordering Information
Mechanical
Mating Force: ≤ 0.75N/PIN
Withdrawl Force: ≥ 0.15N/PIN
Mating and Un-mating Operations: 200 for KR plating
Electrical
Current Rating: 1.0 Amperes at 70°C with all contacts powered
Contact Resistance: ≤ 20 mΩ
Insulation Resistance: ≥ 10,000 MΩ
Test Voltage: 750 VACRMS
Environmental
Temperature Ratings: -55°C to 125°C
PCB Data
Recommended PCB Plated Through Hole: Ө 0.6±0.05 mm
Drill hole diameter: Ө 0.7±0.02 mm
Hole platings: Cu 25~50μm, Sn<10 μm
PCB thickness: 2.4 - 5.6 mm for 3.7 mm tails, 1.4 - 5.6 mm for 2.3 mm tails
Press-In Force: ≤ 204N/pin on nominal hole diameter
Retention Force: ≥ 13.5N/pin on nominal hole diameter
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
For technical, sales or ordering information call
800-225-5373
3M™ CP2 Press-Fit Header
2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series
TS-2263-B
Sheet 2 of 7
Ordering Information
CP2-HABXXX-XXX-XXXX
RECOMMENDED PCB LAYOUT
Signal
Contact
Quantity
Dimension A Dimension B Dimension C
95 38.00 [1.496] 38.30 [1.508] 36.00 [1.417]
110 44.00 [1.732] 44.30 [1.744] 42.00 [1.653]
125 50.00 [1.968] 50.30 [1.980] 48.00 [1.890]
5
2
1
"A"
"C"
z
b
c
d
e
f
a
Tail
Mating
MAX
length
length
z
b
c
d
e
f
az
b
c
d
e
f
a
z
b
c
d
e
f
a
"B"
4
2
1
Number of Signal Contacts
095,110 and125
Loading Configurations
(See diagrams on following pages)
Grounding Options:
G= with ground pins
Blank= without ground pins
EMLB Patterns
Primary Tail Length
1= 3.7 mm
2= 2.3 mm
4= 15.8 mm
Plating Options
FJ= 10∼20 μ" Gold Contact Area
100∼200 μ" Matte Tin
50∼80 μ" Nickel Underplate
(RIA E1 & C1 apply)
KR= 30∼40 μ" Gold Contact Area
100∼200 μ" Matte Tin
50∼80 μ" Nickel Underplate
(RIA E1 & C1 apply)
KV = 30∼40 μ" Mate End Gold Contact area
Gold Flash Tail Contact area
50∼80 μ" Nickel Underplate
(RIA E1 & C1 apply)
For Primary Tail Length option 4 only
• This diagram serves only for Part Number descriptive definitions.
• For standard product configuration please see following pages.
PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS.
mm
[Inch]
±0.13
±1 ±0.3
Tolerance Unless Noted
±0. ±.0 ±.00
mm
[ ] Dimensions for
Reference only
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
For technical, sales or ordering information call
800-225-5373
3M™ CP2 Press-Fit Header
2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series
TS-2263-B
Sheet 3 of 7
CP2-HAB095-E1-TG30 Connector Type B19
F
EAAAAAAAAAAAAAAAAAAA
DAAAAAAAAAAAAAAAAAAA
CAAAAAAAAAAAAAAAAAAA
BAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAA
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
CP2-HAB095-GE1-TG30 Connector Type B19
FCCCCCCCC CCCCCCCC
EAAAAAAAAAAAAAAAAAAA
DAAAAAAAAAAAAAAAAAAA
CAAAAAAAAAAAAAAAAAAA
BAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAA
ZCCCCCCCC CCCCCCCC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
CP2-HAB095-A1-TG30 Connector Type B19
F
EBBBBBBBBBBBBBBBBBBB
DBBBBBBBBBBBBBBBBBBB
CBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBB
ABBBBBBBBBBBBBBBBBBB
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
CP2-HAB095-GA1-TG30 Connector Type B19
FCCCCCCCC CCCCCCCC
EBBBBBBBBBBBBBBBBBBB
DBBBBBBBBBBBBBBBBBBB
CBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBB
ABBBBBBBBBBBBBBBBBBB
ZCCCCCCCC CCCCCCCC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
For technical, sales or ordering information call
800-225-5373
3M™ CP2 Press-Fit Header
2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series
TS-2263-B
Sheet 4 of 7
CP2-HAB095-GA4-GG30 Connector Type B19
FTTTTTTTT TTTTTTTT
ERRRRRRRRRRRRRRRRRRR
DRRRRRRRRRRRRRRRRRRR
CRRRRRRRRRRRRRRRRRRR
BRRRRRRRRRRRRRRRRRRR
ARRRRRRRRRRRRRRRRRRR
ZTTTTTTTT TTTTTTTT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Signal Contact Configuration Worksheet Connector Type B19
F
E
D
C
B
A
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
CP2-HAB110-E1-TG30 Connector Type B22
F
EAAAAAAAAAAAAAAAAAAAAAA
DAAAAAAAAAAAAAAAAAAAAAA
CAAAAAAAAAAAAAAAAAAAAAA
BAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAA
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
CP2-HAB110-GE1-TG30 Connector Type B22
FCCCCCCCCC CCCCCCCCC
EAAAAAAAAAAAAAAAAAAAAAA
DAAAAAAAAAAAAAAAAAAAAAA
CAAAAAAAAAAAAAAAAAAAAAA
BAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAA
ZCCCCCCCCC CCCCCCCCC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
For technical, sales or ordering information call
800-225-5373
3M™ CP2 Press-Fit Header
2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series
TS-2263-B
Sheet 5 of 7
CP2-HAB110-A1-TG30 Connector Type B22
F
EBBBBBBBBBBBBBBBBBBBBBB
DBBBBBBBBBBBBBBBBBBBBBB
CBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBB
ABBBBBBBBBBBBBBBBBBBBBB
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
CP2-HAB110-GA1-TG30 Connector Type B22
FCCCCCCCCC CCCCCCCCC
EBBBBBBBBBBBBBBBBBBBBBB
DBBBBBBBBBBBBBBBBBBBBBB
CBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBB
ABBBBBBBBBBBBBBBBBBBBBB
ZCCCCCCCCC CCCCCCCCC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
CP2-HAB110-GA4-GG30 Connector Type B22
FTTTTTTTTT TTTTTTTTT
ERRRRRRRRRRRRRRRRRRRRRR
DRRRRRRRRRRRRRRRRRRRRRR
CRRRRRRRRRRRRRRRRRRRRRR
BRRRRRRRRRRRRRRRRRRRRRR
ARRRRRRRRRRRRRRRRRRRRRR
ZTTTTTTTTT TTTTTTTTT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Signal Contact Configuration Worksheet Connector Type B22
F
E
D
C
B
A
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
For technical, sales or ordering information call
800-225-5373
3M™ CP2 Press-Fit Header
2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series
TS-2263-B
Sheet 6 of 7
CP2-HAB125-E1-TG30 Connector Type B25
F
EAAAAAAAAAAAAAAAAAAAAAAAAA
DAAAAAAAAAAAAAAAAAAAAAAAAA
CAAAAAAAAAAAAAAAAAAAAAAAAA
BAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAA
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
CP2-HAB125-GE1-TG30 Connector Type B25
FBBBBBBBBBBB BBBBBBBBBBB
EAAAAAAAAAAAAAAAAAAAAAAAAA
DAAAAAAAAAAAAAAAAAAAAAAAAA
CAAAAAAAAAAAAAAAAAAAAAAAAA
BAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAA
ZBBBBBBBBBBB BBBBBBBBBBB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
CP2-HAB125-A1-TG30 Connector Type B25
F
EBBBBBBBBBBBBBBBBBBBBBBBBB
DBBBBBBBBBBBBBBBBBBBBBBBBB
CBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBBBBB
ABBBBBBBBBBBBBBBBBBBBBBBBB
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
CP2-HAB125-GA1-TG30 Connector Type B25
FCCCCCCCCCCC CCCCCCCCCCC
EBBBBBBBBBBBBBBBBBBBBBBBBB
DBBBBBBBBBBBBBBBBBBBBBBBBB
CBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBBBBB
ABBBBBBBBBBBBBBBBBBBBBBBBB
ZCCCCCCCCCCC CCCCCCCCCCC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
For technical, sales or ordering information call
800-225-5373
3M™ CP2 Press-Fit Header
2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series
TS-2263-B
Sheet 7 of 7
CP2-HAB125-GA4-GG30 Connector Type B25
FTTTTTTTTTTT TTTTTTTTTTT
ERRRRRRRRRRRRRRRRRRRRRRRRR
DRRRRRRRRRRRRRRRRRRRRRRRRR
CRRRRRRRRRRRRRRRRRRRRRRRRR
BRRRRRRRRRRRRRRRRRRRRRRRRR
ARRRRRRRRRRRRRRRRRRRRRRRRR
ZTTTTTTTTTTT TTTTTTTTTTT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Signal Contact Configuration Worksheet Connector Type B25
F
E
D
C
B
A
Z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Please recycle. Printed in USA.
© 3M 2015. All rights reserved.
RIA-2217A-E
3
Electronics Materials Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
3M is a trademark of 3M Company.
Unless otherwise noted, references to industry specifications are intended to indicate substantial compliance to the material elements of the
specification. Such references should not be construed as a guarantee of compliance to all requirements in a given specification.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy
or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You
assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized
officer of 3M.
Warranty; Limited Remedy; Limited Liability
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product
or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any direct, indirect, special, incidental
or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
