107-68141 Packaging Specification 01Sep08 Rev F PLUG ASSY FOR 2.5MM SLIM BATTERY CONN. 1. PURPOSE Define the packaging specifiction and packaging method of PLUG ASSY FOR 2.5MM SLIM BATTERY CONN. Connector. PLUG ASSY FOR 2.5MM SLIM BATTERY CONN. 2. APPLICABLE PRODUCT Product Description Part No. 6376042-2 PLUG ASSY FOR 2.5MM SLIM BATTERY CONN.(WITHOUT NUT PLATE) 1376042-2 PLUG ASSY FOR 2.5MM SLIM BATTERY CONN.(WITHOUT NUT PLATE) 3. PACKAGING MATERIAL Package Part No. INNER MIDDLE Description Size(LxWxH) Usage 3-912078-8 TY Slim Battery Plug 5P 295x182x13.1 8/504 9-912064-2 INNER BOX TYPE-2 302x195x103 1/504 9-912064-3 URETHANE CUSHION 280x170x5 2/504 TAPE 25w 4.0MR/504 DESICCANT 10g 2/504 623853-1 1-623124-0 OUTER 995250-7 PE BAG 407x457 1/504 623865-4 INNER LABEL 102X51 1/504 2-912011-9 CARTON C-5-3/4 397x313x220 1/2016 912065-2 AIR CAP #37 C-5 1100x390x4 1/2016 623865-1 OUTER LABEL 102X102 1/2016 Inner Middle Outer LABEL - 623865-4 623865-1 SEALING - Tape Tape 4. PACKAGING QUANTITY QTY Inner Middle Outer 72 pcs/tray 504 pcs/inner box 2016 pcs/carton DR CHK APVD Sam Wu Ocean Tang Michelle Peng Tyco Electronics AMP Guangdong Ltd. East Rongqi Road, Ronggui Town, Shunde, Foshan, Guangdong, P.R. China QR-ME-030B * Trademark | Indicates change 1 of 3 LOC FR 107-68141 5. PACKING METHOD 5.1. Load connectors qty as 4 all oriented same way into tray. 4TRAY 5.2. Place another tray onto previous tray with products.and ensure the two trays are justification completely. TRAY, TRAY 5.3. Stack 7 trays with contacts one by one.then one empty tray & wrap the trays with tape(see figure 1). 7 TRAY TRAY(1) 1 3 (623853-1) 1 5.4. Place one stack into the polybag and place two bags of desiccant(1-623124-0) on top of tray & heat-seal it. TRAYTRAY(1-623124-0) 5.5. Set up an inner box. 5.6. Place a cushion on bottom of inner box, and ensure under edge of tray don't pin cushion. TRAY 5.7. Place trays full of connectors qty as 4 into the inner box and place 1 cushion on top of empty tray. 4 TRAYTRAY 5.8. Close cover of the inner box, place tape on the middle of three sides. () 5.9. Place an inner label on the middle of cover of box. 5.10. Set up a carton.and secure bottom flaps with tape. Rev F QR-ME-030B 2 of 3 107-68141 5. PACKING METHOD 5.11. Spread air cap and put into the box, air cap facing down. 5.12. Put 4 inner boxes full of products into the cartion and muffle 4 inner boxes with air cap. 4 5.13. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" Rev F QR-ME-030B 3 of 3