BAS16WS-G www.vishay.com Vishay Semiconductors Small Signal Fast Switching Diode FEATURES * Silicon epitaxial planar diode * Fast switching diode * AEC-Q101 qualified * Base P/N-G3 - green, commercial grade * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: SOD-323 Weight: approx. 4 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box PARTS TABLE PART BAS16WS-G ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS BAS16WS-G3-08 or BAS16WS-G3-18 Single diode AK Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Repetitive peak reverse voltage Forward current (continuous) SYMBOL VALUE UNIT VR 75 V VRRM 100 V IF 250 mA A t = 1 s IFSM 2 t = 1 ms IFSM 1 A t=1s IFSM 0.5 A Ptot 200 mW SYMBOL VALUE UNIT RthJA 650 K/W Tj 150 C Storage temperature range Tstg - 65 to + 150 C Operating temperature range Top - 55 to + 150 C Non-repetitive peak forward current Power dissipation THERMAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature Rev. 1.1, 13-May-13 TEST CONDITION Document Number: 85152 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS16WS-G www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MAX. UNIT IF = 1 mA VF 0.715 V IF = 10 mA VF 0.855 V IF = 50 mA VF 1 V Forward voltage TYP. IF = 150 mA VF 1.250 V VR = 25 V, TJ = 150 C IR 30 A Leakage current VR = 75 V IR 1 A VR = 75 V, TJ = 150 C IR 50 A VR = 0, f = 1 MHz CD 2 pF IF = 10 mA, IR = 10 mA, iR = 1 mA, RL = 100 trr 6 ns Diode capacitance Reverse recovery time MIN. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 500 103 400 Tj = 100 C 102 Ptot (mW) IF (mA) Tj = 25 C 10 1 300 200 100 10- 1 0 10- 2 0 1 2 18185 0 100 200 Tamb (C) VF (V) 18105 Fig. 1 - Forward Characteristics Fig. 3 - Admissible Power Dissipation vs. Ambient Temperature 104 Tj = 25 C 5 2 10 Tj = 25 C 1.1 f = 1 MHz f = 1 kHz 3 1.0 CD (VR) 2 102 5 CD (0 V) Rf () 5 0.9 0.8 2 10 5 0.7 2 10-2 17438 10-1 1 10 IF (mA) Fig. 2 - Dynamic Forward Resistance vs. Forward Current Rev. 1.1, 13-May-13 0 102 17440 2 4 6 8 10 VR (V) Fig. 4 - Relative Capacitance vs. Reverse Voltage Document Number: 85152 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS16WS-G www.vishay.com Vishay Semiconductors 104 5 2 103 IR (nA) 5 2 102 5 2 10 5 VR = 20 V 2 1 0 100 17441 200 Tj (C) Fig. 5 - Leakage Current vs. Junction Temperature 0.1 (0.004) max. 0 to 8 0.15 (0.006) 0.10 (0.004) 0.2 (0.008) 0.8 (0.031) 1.15 (0.045) PACKAGE DIMENSIONS in millimeters (inches): SOD-323 0.40 (0.016) 0.25 (0.010) 1.95 (0.077) 1.60 (0.063) 2.50 (0.098) 1.1 (0.043) 2.85 (0.112) 1.5 (0.059) 0.40 (0.016) 0.20 (0.008) Cathode bar Foot print recommendation: Document no.:S8-V-3910.02-001 (4) Created - Date: 24.August.2004 Rev. 5 - Date: 23.Sept.2009 17443 Rev. 1.1, 13-May-13 1.6 (0.063) 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) Document Number: 85152 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BAS16WS-G3-08 BAS16WS-G3-18