SOMC Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount FEATURES * Isolated, bussed and dual terminator schematics available * 14, 16 or 20 terminal package * Molded case construction * Thick film resistive elements * Reflow solderable * Compatible with automatic surface mounting equipment * Reduces total assembly costs * For wave flow soldering contact factory * Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS POWER RATING GLOBAL MODEL PACKAGE P70 C W ELEMENT P70 C W SOMC 0.08 0.16 0.08 CIRCUIT 14 16 20 1.05 1.125 1.05 1.20 1.28 1.20 1.52 1.60 1.52 MAXIMUM TEMPERATURE RESISTANCE WORKING TOLERANCE (3) COEFFICIENT (1) RANGE E-SERIES VOLTAGE (2) % ppm/C VDC 01 03 05 50 1, 2, 5 1, 2, 5 1, 2, 5 100 10 to 1M 24 Notes * DSCC has created series of drawings to support the need for a surface mount gull wing resistor network product. Vishay Dale is listed as a resource on this drawing as follows: POWER RATING DSCC DRAWING NUMBER VISHAY DALE MODEL 87012 87013 RESISTANCE RANGE TOLERANCE % TEMPERATURE COEFFICIENT (0 C to 70 C) ppm/C MAXIMUM WORKING VOLTAGE (2) VDC 1.20 10 to 2.2M 1, 2, 5 100, 300 50 1.00 10 to 2.2M 1, 2, 5 100, 300 50 CIRCUIT ELEMENT P70 C W PACKAGE P70 C W SOMC1601..16 SOMC1603..17 SOMC1605..48 01 (B) 03 (A) 05 (J) 0.08 0.16 0.08 SOMC1401..6 SOMC1403..13 SOMC1405..22 01 (B) 03 (A) 05 (J) 0.08 0.16 0.08 These drawings can be viewed at: www.dscc.dla.mil/Programs/milSpec/ListDwgs.asp?DocType=DSCCdwg. * Power rating depends on the max. temperature at the solder point,the component placement density and the substrate material. * Jumper: 0 -resistor on request (100 m). * Packaging: According to EIA; see appropriate catalog or web page. (1) Temperature range: - 55 C to + 125 C. (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (3) 2 % standard, 1 % and 5 % available. TECHNICAL SPECIFICATIONS PARAMETER Rated dissipation at 70 C per element UNIT 01 CIRCUIT 03 CIRCUIT 05 CIRCUIT W 0.08 0.16 0.08 VDC 50 ppm/V < 50 VDC/AC peak 200 Category temperature range C - 55/+ 150 Insulation resistance > 1010 ppm/C 50 Limiting element voltage (4) Voltage coefficient Insulation voltage (1 min) TC tracking (- 55 C to + 125 C) Note (4) Rated voltage: P x R. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 31508 Revision: 20-May-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 413 SOMC Thick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: SOMC16011K00GDC (preferred part numbering format) S O GLOBAL MODEL M C 1 6 PIN COUNT SCHEMATIC 14 16 20 01 = Bussed 03 = Isolated 00 = Special SOMC 0 1 1 K 0 0 RESISTANCE VALUE TOLERANCE CODE R= K = k M = M 10R0 = 10 680K = 680 k 1M00 = 1.0 M F=1% G=2% J=5% S = Special G D C PACKAGING SPECIAL EJ = Lead (Pb)-free, tube Blank = Standard EA = Lead (Pb)-free, tape and reel (Dash number) (Up to 3 digits) DC = Tin/lead, tube From 1 to 999 as RZ = Tin/lead, tape and reel applicable Historical Part Number Example: SOMC1601102G (will continue to be accepted) SOMC 16 01 102 G D02 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: SOMC2005500BGRZ (preferred part numbering format) S GLOBAL MODEL O M C 2 0 PIN COUNT SCHEMATIC 14 16 20 05 = Dual terminator SOMC 0 5 5 0 0 B RESISTANCE VALUE TOLERANCE CODE 3 digit impedance code, followed by alpha modifier (see Impedance table) F=1% G=2% J=5% G R Z PACKAGING SPECIAL Blank = Standard EJ = Lead (Pb)-free, tube EA = Lead (Pb)-free, tape and reel (Dash number) Up to 3 digits DC = Tin/lead, tube From 1 to 999 as RZ = Tin/lead, tape and reel applicable Historical Part Number Example: SOMC2005820131G (will continue to be accepted) SOMC 20 05 820 131 G R61 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING CIRCUIT SCHEMATICS 01 Circuit 14 pin www.vishay.com 414 16 pin 20 pin 14 pin 16 pin 20 pin For technical questions, contact: ff2aresistors@vishay.com R2 R1 R1 R2 R1 R1 R2 R2 R2 R1 R2 R1 R2 R2 R2 R1 R1 R2 R1 R1 R1 Pin 1 R2 R2 Pin 1 R1 05 Circuit 03 Circuit 14 pin Document Number: 31508 Revision: 20-May-10 SOMC Thick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount Vishay Dale DIMENSIONS Pin 1 SOLDER PAD DIMENSIONS in millimeters a b c l p w WAVE 0.64 1.91 5.34 9.53 1.27 9.15 REFLOW 0.64 1.91 5.34 9.53 1.27 9.15 Notes * The dimension shown are for a 16 pin part. For parts with different pin numbers use the same pitch and add or subtract pads as required. * Maximum solder reflow temperature + 255 C. DIMENSIONS in millimeters PIN NO# L W B E F G H K R S T 14 9.91 7.62 7.62 6.20 5.59 2.16 2.03 0.914 0.457 1.27 1.14 16 11.18 7.62 8.89 6.20 5.59 2.16 2.03 0.914 0.457 1.27 1.14 20 13.72 7.62 11.43 6.20 5.59 2.16 2.03 0.914 0.457 1.27 1.14 Tol. 0.254 0.381 0.254 0.381 0.127 0.127 0.127 0.254 IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K PERFORMANCE TEST CONDITIONS OF TEST TEST RESULTS (TYPICAL TEST LOTS) Power conditioning MIL-STD-202 0.5 % Load life at 70 C MIL-STD-202 0.5 % Short time overload MIL-STD-202 0.25 % Thermal shock MIL-STD-202 0.5 % Moisure resistance MIL-STD-202 0.5 % Resistance to soldering heat MIL-STD-202 0.25 % Low temperature operation MIL-STD-202 0.25 % Vibration MIL-STD-202 0.25 % Shock MIL-STD-202 0.25 % Terminal strength MIL-STD-202 0.25 % Document Number: 31508 Revision: 20-May-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 415 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1