CODE 79 - HEAT SHRINK BOOT BACKSHELL 229M312-01-ET SERIES ORDER NUMBER (TABLE 1) MATERIAL NICKEL ALUMINIUM BRONZE SHOT-BLAST FINISH MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-229M312-01). 4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION. 5. BACKSHELL MATES TO BS9522-F0020 PATT 608 CONNECTORS. DRAWN W.RUST DATE CHECKED 15/10/2015 APPROVED K.SHEPPARD 15/10/2015 APPROVED LTR 3 A H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 15/10/2015 15/10/2015 REVISIONS DESCRIPTION REVISED REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE 17/01/13 APPROVED 15/10/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 H.SMITH TITLE: HEAT SHRINK BOOT BACKSHELL ASSY USED ON: BS9522-F0020 PATT 608 TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 229M3XXSERIES A 1 MEDIUM DIAMOND KNURL A-A 20,40 10,50 A E 3,50 OC XXXX OD A THREAD OB PART MARK HERE A TABLE 1 BASE PART NUMBER 229M308 229M310 229M312 229M314 229M316 229M318 229M320 229M322 229M324 DRAWN W.RUST DATE 15/10/2015 APPROVED K.SHEPPARD 15/10/2015 APPROVED LTR 3 A H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 15/10/2015 CHECKED 15/10/2015 REVISIONS DESCRIPTION REVISED REVISED PER ECO-15-013980 SHELL SIZE 5 8 10 12 14 16 18 20 22 24 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE 17/01/13 APPROVED 15/10/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 H.SMITH A THREAD OB MAX OC +0,00/-0,50 OD MIN E +0,20/-0,00 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1 1/16-18UNEF 1 3/16-18UNEF 1 5/16-18UNEF 1 7/16-18UNEF 19,3 21,3 24,3 29,2 30,8 33,8 38,5 38,5 42,5 13,0 16,0 19,0 22,0 25,0 29,2 32,2 35,2 38,2 8,0 11,0 14,3 17,0 20,0 23,0 26,0 29,0 32,0 1,12 1,12 1,12 1,12 1,12 1,12 1,75 1,75 1,75 TITLE: HEAT SHRINK BOOT BACKSHELL ASSY USED ON: BS9522-F0020 PATT 608 TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 229M3XXSERIES A 2