611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com
REFLECTIVE SWITCHES ABSORPTIVE SWITCHES
Frequency Insertion Insertion Switching
Range Part Loss VSWR Isolation Part Loss VSWR Isolation Speed MAX RF
(GHz) Number (dB max) (max) (dB min) Number (dB max) (max) (dB min) (nsec max) (W CW)
0.01 – 0.1 S1H1R 0.8 1.5 75 S1H1 0.9 1.5 80 250 1
0.01 – 0.5 S1H2R 0.9 1.5 75 S1H2 1.0 1.5 80 250 1
0.01 – 1 S1H3R 1.2 1.5 75 S1H3 1.3 1.5 80 250 1
0.01 – 2 S1H4R 1.8 1.6 75 S1H4 1.9 1.6 80 250 1
0.01 – 4 S1H5R 2.5 1.8 75 S1H5 2.6 1.8 80 250 1
0.1 – 0.5 S1V1R 0.9 1.5 80 S1V1 1.0 1.5 80 250 1
0.1 – 1 S1V2R 1.2 1.5 80 S1V2 1.3 1.5 80 250 1
0.1 – 2 S1V3R 1.8 1.6 80 S1V3 1.9 1.6 80 250 1
0.1 – 4 S1V4R 2.5 1.8 75 S1V4 2.8 1.8 80 250 1
0.1 – 8 S1V5R 3.2 2.0 70 S1V5 3.3 2.0 75 250 1
0.1 – 10 S1V6R 3.5 2.0 70 S1V6 3.6 2.0 75 250 1
0.5 – 1 S1U1R 1.0 1.5 80 S1U1 1.1 1.5 80 100 1
0.5 – 2 S1U2R 1.4 1.6 80 S1U2 1.5 1.6 80 100 1
0.5 – 4 S1U3R 2.0 1.8 75 S1U3 2.1 1.8 80 100 1
0.5 – 6 S1U4R 2.2 1.9 70 S1U4 2.3 2.0 75 100 1
0.5 – 12 S1U5R 2.5 2.0 65 S1U5 2.7 2.0 70 100 0.5
0.5 – 18 S1U6R 2.8 2.0 60 S1U6 3.0 1.9 65 100 0.5
1 – 2 S1L1R 0.8 1.5 80 S1L1 0.9 1.5 85 100 1
1 – 4 S1L2R 1.1 1.6 80 S1L2 1.2 1.6 85 100 1
1 – 8 S1L3R 1.8 1.8 75 S1L3 1.9 1.8 80 100 1
1 – 10 S1L4R 1.9 2.0 70 S1L4 2.0 2.0 75 100 1
1 – 12 S1L5R 2.0 2.0 65 S1L5 2.2 2.0 70 100 0.5
1 – 14 S1L6R 2.2 2.0 65 S1L6 2.4 2.0 70 100 0.5
1 – 18 S1L7R 2.7 2.0 60 S1L7 3.0 2.0 65 100 0.5
2 – 4 S1S1R 1.0 1.6 70 S1S1 1.1 1.6 75 100 1
2 – 6 S1S2R 1.3 1.7 70 S1S2 1.4 1.7 75 100 1
2 – 8 S1S3R 1.7 1.8 70 S1S3 1.8 1.8 75 100 1
2 – 10 S1S4R 1.8 1.8 70 S1S4 2.0 1.8 70 100 1
2 – 12 S1S5R 2.0 1.9 65 S1S5 2.2 1.9 70 100 0.5
2 – 16 S1S6R 2.5 2.0 60 S1S6 2.7 2.0 65 100 0.5
2 – 18 S1S7R 2.7 2.0 60 S1S7 3.0 2.0 65 100 0.5
4 – 8 S1C1R 1.1 1.6 70 S1C1 1.8 1.6 75 100 1
4 – 10 S1C2R 1.2 1.7 70 S1C2 2.0 1.7 70 100 1
4 – 12 S1C3R 1.5 1.8 65 S1C3 2.2 1.8 70 100 0.5
4 – 16 S1C4R 1.9 2.0 60 S1C4 2.7 2.0 65 100 0.5
4 – 18 S1C5R 2.0 2.0 60 S1C5 2.8 2.0 65 100 0.5
6 – 10 S1C6R 1.2 1.7 70 S1C6 2.0 1.7 70 100 1
6 – 12 S1C7R 1.5 1.8 65 S1C7 2.2 1.8 70 100 0.5
6 – 18 S1C8R 2.0 2.0 60 S1C8 2.8 2.0 65 100 0.5
8 – 10 S1X1R 1.2 1.7 70 S1X1 1.9 1.7 70 100 0.5
8 – 12 S1X2R 1.5 1.8 65 S1X2 2.2 1.8 70 100 0.5
8 – 18 S1X3R 2.0 2.0 60 S1X3 2.8 2.0 65 100 0.5
10 – 18 S1K1R 2.0 2.0 60 S1K1 2.8 2.0 65 100 0.5
12 – 18 S1K2R 2.0 2.0 60 S1K2 2.8 2.0 65 100 0.5
The S1 series of single pole, single throw PIN diode switches span the
frequency range of 10MHz to 18GHz and are available with absorptive
or reflective inputs. The switches are available in a wide variety of
standard frequency ranges from cost-effective narrowband to high-
performance broadband. Each switch incorporates a TTL-compatible
driver for convenient system integration and operates from +5V and -
12V to -18V DC power supplies. All switches incorporate DC blocks at
the RF ports. Standard screened switches incorporate epoxy sealed
lids and undergo a stringent yet cost effective screening cycle. The
switches are also available with hermetic seal and high-rel screening
for military and aerospace applications.
Applications:
• EW Systems • Test Equipment
• Communications Systems • Electronic Simulators
• Modulators
SINGLE-POLE, SINGLE-THROW SWITCHES
611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com
NOTES: MECHANICAL SPECIFICATIONS:
DC Bias: +5V +/-0.5V @ 50mA max Case Style: S1 Outline
(Standard) -15V +/-3V @ 50mA max Finish: Gold Plate per MIL-G-45204
Bias & Control Pins: ø0.02” x 0.15” long
DC Bias: +5V +/-0.5V @ 60mA max Weight: 20g max
(-5 option) -5V +/-0.5V @ 60mA max Mounting: ø0.10” through holes (4) places
DC Bias: +15V +/-3V @ 50mA max
(-12 option) -15V +/-3V @ 50mA max
Control: TTL 0 = Low Loss
TTL 1 = Isolation
Absorptive switch: 50 terminations at both RF ports (in isolation mode).
Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to 10%RF (t-off).
ENVIRONMENTAL SPECIFICATIONS: SCREENING:
MIL-E-5400, MIL-STD-202, MIL-E-16400 Internal Visual per MIL-STD-883, Method 2017
Operating Temp: -55°C to +85°C Temperature Cycle: -65°C to +100°C, 10 cycles
Storage Temp: -65°C to +125°C
Humidity: MIL-STD-202F, M103, Cond B Hermetically-sealed switches are fine and gross leak checked
Shock: MIL-STD-202F, M213, Cond B per MIL-STD-883, Method 1014.
Altitude: MIL-STD-202F, M105, Cond B
Vibration : MIL-STD-202F, M204, Cond B Optional High-Rel screening available upon request.
Thermal Shock: MIL-STD-202F, M107, Cond A Contact the factory to discuss your screening requirements.
Temperature Cycle: MIL-STD-202F, M105C, Cond D
OUTLINE CASE STYLE S1
S1-1209
CUSTOM OPTIONS – CONTACT FACTORY:
• Gray epoxy paint per MIL-C-22750
• Video transient suppression
• GPO connectors
• ECL logic input
• Phase and amplitude matching
• Other frequency ranges available from 1MHz to 26GHz
• Reversed logic
• Available without SMA connectors for drop-in applications
• High rel screening
PART NUMBER ORDERING INFORMATION:
• Add “-RC” suffix: RoHS-compliant
• Add “-5” suffix: +/-5V DC supplies
• Add “-5-RC” suffix: +/-5V DC supplies, RoHS-compliant
• Add “-12” suffix: +/-12V to 18V DC supplies
• Add “-12-RC” suffix: +/-12V to 18V DC supplies, RoHS-compliant
• Add “-H” suffix: Hermetic seal (does not apply to RoHS-compliant
models)
