SINGLE-POLE, SINGLE-THROW SWITCHES The S1 series of single pole, single throw PIN diode switches span the frequency range of 10MHz to 18GHz and are available with absorptive or reflective inputs. The switches are available in a wide variety of standard frequency ranges from cost-effective narrowband to highperformance broadband. Each switch incorporates a TTL-compatible driver for convenient system integration and operates from +5V and 12V to -18V DC power supplies. All switches incorporate DC blocks at the RF ports. Standard screened switches incorporate epoxy sealed lids and undergo a stringent yet cost effective screening cycle. The switches are also available with hermetic seal and high-rel screening for military and aerospace applications. Applications: * EW Systems * Communications Systems * Modulators * Test Equipment * Electronic Simulators REFLECTIVE SWITCHES Frequency Range (GHz) Part Number 0.01 - 0.1 0.01 - 0.5 0.01 - 1 0.01 - 2 0.01 - 4 0.1 - 0.5 0.1 - 1 0.1 - 2 0.1 - 4 0.1 - 8 0.1 - 10 0.5 - 1 0.5 - 2 0.5 - 4 0.5 - 6 0.5 - 12 0.5 - 18 1-2 1-4 1-8 1 - 10 1 - 12 1 - 14 1 - 18 2-4 2-6 2-8 2 - 10 2 - 12 2 - 16 2 - 18 4-8 4 - 10 4 - 12 4 - 16 4 - 18 6 - 10 6 - 12 6 - 18 8 - 10 8 - 12 8 - 18 10 - 18 12 - 18 S1H1R S1H2R S1H3R S1H4R S1H5R S1V1R S1V2R S1V3R S1V4R S1V5R S1V6R S1U1R S1U2R S1U3R S1U4R S1U5R S1U6R S1L1R S1L2R S1L3R S1L4R S1L5R S1L6R S1L7R S1S1R S1S2R S1S3R S1S4R S1S5R S1S6R S1S7R S1C1R S1C2R S1C3R S1C4R S1C5R S1C6R S1C7R S1C8R S1X1R S1X2R S1X3R S1K1R S1K2R Insertion Loss VSWR Isolation (dB max) 0.8 0.9 1.2 1.8 2.5 0.9 1.2 1.8 2.5 3.2 3.5 1.0 1.4 2.0 2.2 2.5 2.8 0.8 1.1 1.8 1.9 2.0 2.2 2.7 1.0 1.3 1.7 1.8 2.0 2.5 2.7 1.1 1.2 1.5 1.9 2.0 1.2 1.5 2.0 1.2 1.5 2.0 2.0 2.0 (max) 1.5 1.5 1.5 1.6 1.8 1.5 1.5 1.6 1.8 2.0 2.0 1.5 1.6 1.8 1.9 2.0 2.0 1.5 1.6 1.8 2.0 2.0 2.0 2.0 1.6 1.7 1.8 1.8 1.9 2.0 2.0 1.6 1.7 1.8 2.0 2.0 1.7 1.8 2.0 1.7 1.8 2.0 2.0 2.0 (dB min) 75 75 75 75 75 80 80 80 75 70 70 80 80 75 70 65 60 80 80 75 70 65 65 60 70 70 70 70 65 60 60 70 70 65 60 60 70 65 60 70 65 60 60 60 611 Industrial Way West, Eatontown, NJ 07724 ABSORPTIVE SWITCHES Part Number S1H1 S1H2 S1H3 S1H4 S1H5 S1V1 S1V2 S1V3 S1V4 S1V5 S1V6 S1U1 S1U2 S1U3 S1U4 S1U5 S1U6 S1L1 S1L2 S1L3 S1L4 S1L5 S1L6 S1L7 S1S1 S1S2 S1S3 S1S4 S1S5 S1S6 S1S7 S1C1 S1C2 S1C3 S1C4 S1C5 S1C6 S1C7 S1C8 S1X1 S1X2 S1X3 S1K1 S1K2 tel: 732-460-0212 fax: 732-460-0214 Insertion Loss VSWR Isolation Switching Speed MAX RF (dB max) 0.9 1.0 1.3 1.9 2.6 1.0 1.3 1.9 2.8 3.3 3.6 1.1 1.5 2.1 2.3 2.7 3.0 0.9 1.2 1.9 2.0 2.2 2.4 3.0 1.1 1.4 1.8 2.0 2.2 2.7 3.0 1.8 2.0 2.2 2.7 2.8 2.0 2.2 2.8 1.9 2.2 2.8 2.8 2.8 (max) 1.5 1.5 1.5 1.6 1.8 1.5 1.5 1.6 1.8 2.0 2.0 1.5 1.6 1.8 2.0 2.0 1.9 1.5 1.6 1.8 2.0 2.0 2.0 2.0 1.6 1.7 1.8 1.8 1.9 2.0 2.0 1.6 1.7 1.8 2.0 2.0 1.7 1.8 2.0 1.7 1.8 2.0 2.0 2.0 (dB min) 80 80 80 80 80 80 80 80 80 75 75 80 80 80 75 70 65 85 85 80 75 70 70 65 75 75 75 70 70 65 65 75 70 70 65 65 70 70 65 70 70 65 65 65 (nsec max) 250 250 250 250 250 250 250 250 250 250 250 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 (W CW) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.5 0.5 1 1 1 1 0.5 0.5 0.5 1 1 1 1 0.5 0.5 0.5 1 1 0.5 0.5 0.5 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 sales@advanced-control.com www.advanced-control.com NOTES: DC Bias: (Standard) +5V +/-0.5V @ 50mA max -15V +/-3V @ 50mA max DC Bias: (-5 option) +5V +/-0.5V @ 60mA max -5V +/-0.5V @ 60mA max DC Bias: (-12 option) +15V +/-3V @ 50mA max -15V +/-3V @ 50mA max Control: TTL 0 = Low Loss TTL 1 = Isolation MECHANICAL SPECIFICATIONS: Case Style: S1 Outline Finish: Gold Plate per MIL-G-45204 Bias & Control Pins: o0.02" x 0.15" long Weight: 20g max Mounting: o0.10" through holes (4) places Absorptive switch: 50 terminations at both RF ports (in isolation mode). Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to 10%RF (t-off). ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -55C to +85C Storage Temp: -65C to +125C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D SCREENING: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Hermetically-sealed switches are fine and gross leak checked per MIL-STD-883, Method 1014. Optional High-Rel screening available upon request. Contact the factory to discuss your screening requirements. OUTLINE CASE STYLE S1 PART NUMBER ORDERING INFORMATION: * Add "-RC" suffix: RoHS-compliant * Add "-5" suffix: +/-5V DC supplies * Add "-5-RC" suffix: +/-5V DC supplies, RoHS-compliant * Add "-12" suffix: +/-12V to 18V DC supplies * Add "-12-RC" suffix: +/-12V to 18V DC supplies, RoHS-compliant * Add "-H" suffix: Hermetic seal (does not apply to RoHS-compliant models) CUSTOM OPTIONS - CONTACT FACTORY: * * * * * * * * * Gray epoxy paint per MIL-C-22750 Video transient suppression GPO connectors ECL logic input Phase and amplitude matching Other frequency ranges available from 1MHz to 26GHz Reversed logic Available without SMA connectors for drop-in applications High rel screening S1-1209 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com