1 TECHNICAL DATA HTM1505 RELATIVE HUMIDITY AND TEMPERATURE MODULE Based on the rugged HS1101 humidity sensor , HTM1505 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs.HTM1505 is designed for an optimized board to board connection. MAIN FEATURES Suitable for direct board assembly Not affected by repeated condensations Full interchangeability High reliability and long term stability Typical 1 to 4 Volt DC output for 0 to 100% RH at 5 V DC supply Humidity calibrated within +/- 2% RH @ 55% RH Temperature measurement through NTC 10 kohm +/- 3% direct output Ratiometric to voltage supply within the specified range HUMIDITYSENSOR SPECIFIC FEATURES Instantaneous de-saturation after long periods in saturation phase. Patented solid polymer structure. High resistance to chemicals. Fast response time. MAXIMUM RATINGS Ratings Symbol Value Unit Storage Temperature Tstg -40 to 85 C Supply Voltage (peak) Vs 7 Humidity Operating Range RH 0 to 100 % RH Temperature Operating Range Ta -30 to 85 C Vdc . CHARACTERISTICS (Ta = 23C, Vs = 5Vdc, RL > 1MV otherwise stated) Characteristics Symbol Min Typ Max Unit Humidity measuring range RH 1 99 % RH Relative Humidity accuracy (10 to 95% RH) RH Voltage supply Vs 4.75 5.00 5.25 V Nominal output @ RH = 55% Vout 2.42 2.48 2.54 V 0.8 mA +/-5 % RH Current consumption Ic 0.4 Temperature coefficient (10 to 50 C ) Tcc + 0.1 % RH/C DmV/% RH +25 mV/% RH Ta t 10 10 kohm s Averaged Sensitivity from 33% to 75% RH NTC Nominal output @ 25C / Tolerance +/-3% Recovery time after 150 hours of condensation Humidity Hysteresis +/-1.5 % RH Long term stability 0.5 %RH/yr Response time (33 to 76% RH, static, @ 63%) t 5 s Output impedance Z 70 V Sink current capability (RL 5 15 kV) Is 300 mA 2 TECHNICAL DATA MEASUREMENT CONDITIONS HTM 1505 Typical Measuring Ranges in Humidity HTM1505 is specified for accurate measurements within 10 to 95% RH. Excursion out of this range (< 10% or > 95% RH, including condensation) does not affect the reliability of HTM1505 characteristics. Dedicated HTM15XX Product are available for extreme RH conditions (as HTM1525 for low dewpoints) - Consult HUMIREL for further information. 4000 Output Voltage (mV) 3500 3000 METROLOGY HTM1505 RANGE 2500 2000 1500 1000 0 10 20 30 40 50 60 70 80 90 100 Relative Humidity HTM1505 MODELLED LINEAR VOLTAGE OUTPUT (V S5 5V) REFERENCE OUTPUT VALUES Output Voltage (mV) 4000 3000 2000 Vout 5 30.21 RH 1 814 from 10 to 95% RH with Vout in mV and RH in % 1000 0 10 20 30 40 50 60 70 80 90 100 RH (%) Vout (mV) RH (%) Vout (mV) 10 1080 55 2480 15 1250 60 2625 20 1420 65 2770 25 1580 70 2920 30 1735 75 3065 35 1890 80 3220 40 2040 85 3375 45 2190 90 3530 50 2335 95 3695 Reversed Polynomial Equation Relative Humidity (% RH) 4 Vout = 9.23E- RH3 -1.57E-1RH2 + 37.9RH + 715 ERROR BUDGET AND COMPENSATIONS AT 23C 6 HTM1505 ERROR LIMITS 5 4 Delta in % RH 3 2 Temperature coefficient compensation: 1 0 0 10 20 30 40 50 60 70 80 90 100 21 22 -3 RH % = RH% * (1 -(Ta -23)* 2.4E ) Cor Read 23 24 25 26 Relative Humidity (%RH) 2 Non linearity and temperature compensation: Delta in % RH 1,5 _______________ 1 RH% = -1.0388E-9out V 3 + 7.8530E-6Vout2 + 1.45251E-2Vout - 13.5 0,5 0 0 10 20 30 40 50 20,1 60 70 80 90 100 1+(Ta-23) * 2.4E-3 All equations Vout in mV, RH in %, Ta in C. 21 21,5 LINEARITY ERROR OF HTM1505 MODULE 22 Relative Humidity (%RH) HPC033 Rev. D February 2003 TECHNICAL 3 DATA CHARACTERISTICS Temperature sensor (Ta = 25C) Characteristics Symbol Min. Typ. Nominal resistance @ 25C Max. Unit. 10 k Beta value : B25/100 B 3600 3730 3800 Temperature measuring range Ta - 30 Nominal Resistance Tolerance Rn B value tolerance B 3 % Response Time 10 s 2 80 C 3 % Typical temperature output Depending on the needed temperature measurement range and associated accuracy, we suggest two methods to access to the NTC resistance values. 1 The actual characteristic of an NTC thermistor can, however, only be roughly described by the exponential relation,as the material parame ter B in reality also depends on temperature. So this approach is only suitable for describing a restricted range around the rated temperature or resistance with sufficient accuracy. NTC resistance in at temperature T in K NTC resistance in at rated temperature in K Temperature in K B value,material-specific constant of the NTC thermistor Base of natural logarithm (e =2.71828) Temperature C -30 -29 -28 -27 -26 -25 -24 -23 -22 -21 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 Resistance (ohm) 144790 136664 129054 121925 115243 109030 103115 97565 92354 87460 82923 78581 74497 70655 67039 63591 60381 57356 54503 51813 49204 46767 44467 42296 40247 38279 36455 34731 Max. Deviation 16636 15444 14343 13325 12383 11516 10705 9953 9257 8612 8020 7463 6947 6468 6023 5606 5222 4865 4533 4225 3932 3662 3411 3177 2960 2756 2568 2393 2 For practical applications a more precise description of the real R/T curve may be required. Either more complicated approaches (e.g the Steinhart-Hart equation) are used or the resistance/ temperature relation as given in tabulated form. The below table has been experimentally determined with utmost accuracy for temperature increments of 1 degree. Temperature C Resistance (ohm) Max. Deviation Temperature C -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 33100 31557 30029 28627 27299 26042 24852 23773 22708 21698 20739 19829 18959 18128 17338 16588 15876 15207 14569 13962 13384 12834 12280 11777 11297 10840 10404 10000 2230 2078 1932 1799 1675 1560 1452 1355 1261 1174 1093 1017 946 879 817 759 705 654 607 563 522 484 447 413 382 353 325 300 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 Resistance (ohm) 9600 9218 8853 8506 8178 7866 7568 7283 7011 6734 6484 6244 6015 5796 5575 5373 5180 4995 4817 4636 4473 4316 4166 4021 3874 3737 3606 3481 Max. Deviation Temperature C Resistance (ohm) Max. Deviation 300 300 299 297 296 294 292 290 287 284 281 278 275 271 267 264 260 257 253 248 245 241 237 233 229 225 221 217 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 3360 3237 3126 3019 2917 2819 2720 2629 2542 2458 2378 2304 2229 2158 2089 2022 1960 1898 1839 1782 1727 1673 1622 1573 1526 1480 1432 213 208 204 200 197 193 189 185 182 178 175 171 168 165 161 158 155 152 149 146 143 140 138 135 132 130 127 HPC033 Rev. D February 2003 4 TECHNICAL DATA RESISTANCE TO PHYSICAL AND CHEMICAL STRESSES. HTM1505 has passed through qualification processes of HUMIREL including vibration, shock, storage, high temperature and humidity, ESD. Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (O.5%), H2S (0.5%), O3, NOx, NO, CO, CO2, Softener, Soap, Toluene, acids (H2SO4, HNO3, HCl), HMDS, Insecticide, Cigarette smoke, a non exhaustive list. HTM1505 is not light sensitive. SPECIFIC PRECAUTIONS HTM1505 is not protected against reversed polarity - Check carefully when connecting the device. If you wish to use HTM1505 in a chemical atmosphere not listed above, consult us. Dim TYPICAL PACKAGE OUTLINE OF HTM1505 Min (mm) Max (mm) A 34 36 B 12.5 13.5 C 30.35 Typical D 5.08 Typical E 13.1 Typical . Pin out Assignement 1 NTC - Temperature 2 GROUND 3 Vcc - Voltage Supply 4 Vout - Humidity ORDERING INFORMATION (MULTIPLE PACKAGE QUANTITY OF 10 PIECES). HTM 1505 HUMIDITY ANALOG VOLTAGE OUTPUT MODULE. www.humirel.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsability is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Humirel reserves the right to make changes without further notice to any product herein. Humirel makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Humirel assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typical" must be validated for each customer applications by customeris technical experts. Humirel does not convey any license under its patent rights nor the rights of others. Humirel products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other application intended to support or sustain life, or for any application in which the failure of the Humirel product could create a situation where personal injury or death may occur. Should buyer purchase or use Humirel products for any such unintended or unauthorized application, Buyer shall indemnify and hold Humirel and its officers, employees, subsidaries, affiliates and distributors harmless against all claims, costs, damages and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of presonal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Humirel was negligent regarding the design or manufacture of the part.Humirel is a registred trade mark of Humirel. HPC033 Rev. D February 2003 email: sales@humirel.com