FPS1000 Series
3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4 35
1U high Utilizes less cabinet space
Hotswap capable Suitable for N+1 redundancy
High efficiency Less heat dissipated in system
Full array of signals Easier system monitoring
Feature Benefit
Power for Distributed Power Architecture
Factory Automation
RF Amplifiers
1U high
Up to 3000W (3 units) in 19" rack
Hotswap capable (ORing diodes built in)
Low Cost
PoE Option
Key Market Segments & Applications
Features and Benefits
1000W Front End Power Supplies
MODELS 12V Nominal 24V Nominal 32V Nominal 48V Nominal
ITEMS
Output Voltage Range (1) V 10.5 - 13.2V 21.5 - 29V 28.8 - 38.4V 43 - 58V
Output Current A 72A 40A 31A 21A
Line Regulation - <0.4%
Load Regulation - <0.8%
Output Noise mV 150mV 200mV 250mV 300mV
Overvoltage Protection V 14.3 to 15.7V 31 to 34V 41.5V to 45.5V 62 to 66V
Overcurrent Protection - 105 - 125%, Constant Current type
Load Sharing - Single wire current sharing, up to 8 units
Remote Sense - Compenstates for 1V on each output lead
I2C Monitoring - Optional (Specify /S)
Signals (opto isolated) - DC OK, AC Fail, and Overtemperature warning, high on fail
Remote On/Off - On: 0 - 0.6V or short, Off: 2- 15V or open
Auxiliary Output - 11.2-12.5VDC 0.25A
AC Input - 85 - 265VAC, 47 - 63Hz2, 120-360VDC. (Derate 10% < 100VAC)
Leakage Current mA <1.1mA at 230VAC input
Inrush Current A <40A
Hold up time (100VAC input) - 20ms typical (800W loading)
Efficiency (typ) 100/200VAC - 80 / 83% 83 / 86% 84 / 87% 85 / 88%
Power Factor Correction - EN61000-3-2 class A (20-100% load), >0.98 at full load
Immunity - EN61000-4-2, -3, -4, -5, -6, -11
EMC (conducted and radiated) - EN55022, level B, FCC Class B
Operating Temperature °C 0 to +70°C, derate 2%/°C from 50 to 60°C, 2.5%/°C from 60 to 70°C
Storage Temperature °C -30 to +85°C
Withstand Voltage - Input to Output 3kVAC, Input to Ground 2kVAC, Output to Ground 500VAC for 1 min.
Cooling - Two internal fans, airflow from front to back (variable speed)
Humidity - Operating: 10 - 90% RH, Storage: 10 - 95% RH (non condensing)
Shock & Vibration - Meets ETS 300 019
Safety Agency - UL60950-1, EN60950-1, CE Mark
Input / Output Connector - Positronic PCIB24W9M400A1 (Mating #PCIB24W9F400A1)
Front panel indicators - AC OK, DC OK, DC Fail
Size (LxWxH) in Stand alone: 1.61 x 5 x 11.4"; Rack: 1.72 x 19 x 13.8”
Weight g 2,000
Warranty yr Two Years
Specifications
(1) Via Trim pin on output connector (2) 47-440Hz with reduced PFC (100-265VAC input)
FPS1000 Series
3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4
36
Model Selector
Front AC Input Output Output Maximum I2C
Configuration Voltage Current Power Interface
FPS100012/P* 12V 72A 864W No
FPS100012/PS* 12V 72A 864W Yes
FPS100024/P 24V 40A 960W No
FPS100024/PS 24V 40A 960W Yes
FPS100032/P 32V 31A 992W No
FPS100032/PS 32V 31A 992W Yes
FPS100048/P 48V 21A 1008W No
FPS100048/PS 48V 21A 1008W Yes
FPSS1U/P Rack (3 slot), contains two blanking panels
FPST1U/P Rack with 3 individual outputs (floating)
Rear AC Input Output Output Maximum I2C
Configuration Voltage Current Power Interface
FPS100012* 12V 72A 864W No
FPS100012/S* 12V 72A 864W Yes
FPS100024 24V 40A 960W No
FPS100024/S 24V 40A 960W Yes
FPS100032 32V 31A 992W No
FPS100032/S 32V 31A 992W Yes
FPS100048 48V 21A 1008W No
FPS100048/S 48V 21A 1008W Yes
FPSS1U Rack (3 slot), contains two blanking panels
FPST1U Rack with 3 individual outputs (floating)
Revision B5: Jul 2009
/P Version shown
PX, CC-E, PAQ, PAH, PAF DC-DC Converters
TH 1U 750 to 2000W Front End AC-DC
Other Lambda Industrial Products
FPS/Z0008511 Module Mating Connector
(Positronic PCIB24W9F400A1/AA-S1031)
Accessories
384.0±1.0
351.0 ±0.025.0
440.0 ±0.5 SEE NOTE 3.
65.4 24.0 24.0
225.5 56.5
379.0
14.0
20.0
27.8
MODULE "A"
MODULE "B"
MODULE "C"
I C INTERFACE
ADDRESS SWITCH
(SEE NOTE 4)
-V +V
OUTPUT
BUS BAR SEE NOTE 2.
SIGNALS AND CONTROL
CONNECTOR D-TYPE 25 PINS
(SEE NOTE 1.)
2
466.0
43.6
0.0
0.4
24.5
31.76.0
482.8 ±0.5
FPSS1U Outline DrawingFPS1000 Outline Drawing
Full Systems (3 units + rack)
Front AC Input Output Output Maximum I2C
Configuration Voltage Current Power Interface
FPS300024/P 24V 120A 2880W No
FPS300024/PS 24V 120A 2880W Yes
FPS300048/P 48V 63A 3000W No
FPS300048/PS 48V 63A 3000W Yes
Front AC Input configuration. Remove /P suffix for Rear AC configuration.
Suffix Description
Part No. Description
/POE* 1500VAC Output to Ground Isolation
(Output noise 400mV)
* FPS100048 only.
Options
For Additional Information, please visit us.tdk-lambda.com/lp/products/fps-series.htm
