Specification
Note 烉(1) Initial value. Operate and release time excluding contact bounce.
(2) Unless otherwise specified, all tests are under room temperature and humidity.
(3) Consider the heat of PCB is necessary, please check the actual condition of PCB.
(4) Applying no diode to this relay. The life expectancy will be lower when a diode is used. To use
a varistor (ZNR) could absorb the coil surge of relay that is recommended.
(5) Do not use the relay exceeding the coil rating, contact rating and life expectancy, or this may cause
the risk of overheating.
(6) To assure optimum performance, avoid the relay from dropping, hitting, or other unnecessary shocks.
(7) Do not switch the contacts without any load as the contact resistance may become increased rapidly.
(8) Usage, transport and storage conditions
Ɣ7HPSHUDWXUH焍+125°C
Ɣ+XPLGLW\WR5+
Ɣ3UHVVXUHWRN3D
Ɣ)XUWKHUPRUHWKHKXPLGLW\UDQJHYDULHVZLWKWKHWHPSHUDWXUH6RXVHUHOD\V
within the range indicated in the graph below.
(9) Please contact Song Chuan for the detailed information.
Contact material AgSnO alloy
Contact voltage drop (1) Typ. 5PV at 1$
Operate time (1) 1 ms Max.
Release time (1) 5 ms Max.
Insulation resistance (1) 0 Ω0LQ'&9
Between open contact :$&9+]PLQ
Dielectric strength (1)
Between contact and coil :$&9+]PLQ
Operating extremes
Vibration resistance
Damage limits
Operating extremes *
Shock resistance
Damage limits *
RSV
Mechanical IUHTXHQF\RSVKU
Electrical RSV
Life expectancy
(frequency 36 RSVKU
Operating ambient temperature 焍+125°&QRIUHH]LQJ
Weight Approx. 4 g
焍+] *
焍+] *
Tolerance range
+umidity, R+
(Avoid
free]ing when
used at
temperatures
lower than
°C)
(Avoid
condensation
when used at
temperatures
higher than °C )
Temperature, °C