MPSH17G - ON Semiconductor - Product.Network

January, 2006 − Rev. 3 1Publication Order Number:

MPSH17/D

MPSH17

Preferred Device

CATV Transistor

NPN Silicon

Features

•Pb−Free Package is Available*

MAXIMUM RATINGS

Rating Symbol Value Unit

Collector−Emitter Voltage VCEO 15 Vdc

Collector−Base Voltage VCBO 20 Vdc

Emitter−Base Voltage VEBO 3.0 Vdc

Total Device Dissipation @ TA = 25°C

Derate above 25°CPD350

2.81 mW

mW/°C

Operating and Storage Junction

Temperature Range TJ, Tstg −55 to +150 °C

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

Thermal Res i stance, Junction to Ambient

(Printed Circuit Board Mounting) RqJA 357 °C/W

Maximum ratings are those values beyond which device damage can occur.

Maximum ratings applied to the device are individual stress limit values (not

normal operating conditions) and are not valid simultaneously. If these limits are

exceeded, device functional operation is not implied, damage may occur and

reliability may be affected.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

http://onsemi.com

† For information on tape and reel specifications,

including part orientation and tape sizes, please

refer t o our Tape and Reel Packaging Specification

Brochure, BRD8011/D.

MPSH17RLRA TO−92 2,000/Tape & Ree

MPSH17RLRAG TO−92

(Pb−Free) 2,000/Tape & Ree

Device Package Shipping†

MPSH17 TO−92 5,000 Units/Box

MPSH17G TO−92

(Pb−Free) 5,000 Units/Box

Preferred devices are recommended choices for future use

and best overall value.

ORDERING INFORMATION

COLLECTOR

BASE

EMITTER

MPSH17 = Device Code

A = Assembly Location

Y = Year

WW = Work Week

G= Pb−Free Package

(Note: Microdot may be in either location)

TO−92

CASE 29−11

STYLE 2

123

MARKING

DIAGRAM

MPS

H17

AYWW G

MPSH17

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)

Characteristic Symbol Min Typ Max Unit

OFF CHARACTERISTICS

Collector−Emitter Breakdown Voltage

(IC = 1.0 mAdc, IB = 0) V(BR)CEO 15 − − Vdc

Collector−Base Breakdown Voltage

(IC = 100 mAdc, IE = 0) V(BR)CBO 20 − − Vdc

Emitter−Base Breakdown Voltage

(IE = 10 mAdc, IC = 0) V(BR)EBO 3.0 − − Vdc

Collector Cutoff Current

(VCB = 15 Vdc, IE = 0) ICBO − − 100 nAdc

ON CHARACTERISTICS

DC Current Gain

(IC = 5.0 mAdc, VCE = 10 Vdc) hFE 25 − 250 −

Collector−Emitter Saturation Voltage

(IC = 10 mAdc, IB = 1.0 mAdc) VCE(sat) − − 0.5 −

SMALL−SIGNAL CHARACTERISTICS

Current−Gain − Bandwidth Product

(IC = 5.0 mAdc, VCE = 10 Vdc, f = 100 MHz) fT800 − − MHz

Collector−Base Capacitance

(VCB = 10 Vdc, f = 1.0 MHz) Ccb 0.3 − 0.9 pF

Small−Signal Current Gain

(IC = 5.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hfe 30 − − −

Noise Figure

(IC = 5.0 mAdc, VCC = 12 Vdc, RS = 50 W, f = 200 MHz) NF − − 6.0 dB

FUNCTIONAL TEST

Amplifier Power Gain

(IC = 5.0 mAdc, VCC = 12 Vdc, RS = 50 W, f = 200 MHz) Gpe − 24 − dB

MPSH17

http://onsemi.com

PACKAGE DIMENSIONS

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. CONTOUR OF PACKAGE BEYOND DIMENSION R

IS UNCONTROLLED.

4. LEAD DIMENSION IS UNCONTROLLED IN P AND

BEYOND DIMENSION K MINIMUM.

SECTION X−X

SEATING

PLANE DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.175 0.205 4.45 5.20

B0.170 0.210 4.32 5.33

C0.125 0.165 3.18 4.19

D0.016 0.021 0.407 0.533

G0.045 0.055 1.15 1.39

H0.095 0.105 2.42 2.66

J0.015 0.020 0.39 0.50

K0.500 −−− 12.70 −−−

L0.250 −−− 6.35 −−−

N0.080 0.105 2.04 2.66

P−−− 0.100 −−− 2.54

R0.115 −−− 2.93 −−−

V0.135 −−− 3.43 −−−

TO−92 (TO−226)

CASE 29−11

ISSUE AL

STYLE 2:

PIN 1. BASE

2. EMITTER

3. COLLECTOR

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its of ficers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

MPSH17/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your

local Sales Representative.