FC903
No.3869-1/2
Features
•Composite type with 3 diodes contained in the CP
package currently in use, improving the mounting
efficiency greatly.
•The FC903 is formed with 3 chips, each being
equivalent to the DSB010, placed in one package.
•High switching speed.
Electrical Connection
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Peak Reverse Voltage VRM 85 V
Reverse Voltage VR80 V
Peak Forward Current IFM 300 mA
Average Rectified Current IO100 mA
Surge Forward Current IFSM 1µs4A
Allowable Power Dissipation P Total value 300 mW
Junction Temperature Tj 125 °C
Storage Temperature Tstg -- 55 to + 125 °C
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions Ratings
min typ max Unit
Forward Voltage VF1I
F
=1mA 0.60 V
VF2I
F
=10mA 0.72 V
VF3I
F
=100mA 1.2 V
Reverse Current IR1V
R
=30V 0.1 µA
IR2V
R
=80V 0.5 µA
Interterminal Capacitance C VR=0, f=1MHz 3.0 pF
Reverse Recovery Time trr IF=10mA, VR=6V, RL=50Ω, Irr=0.1Irp 4.0 ns
Note : The specifications shown above are for each individual diode. Marking : 903
trr Test Circuit
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN3869B
FC903
High-Speed Switching Composite Diode
Package Dimensions
unit : mm
1296 [FC903]
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Silicon Epitaxial Planar Type
--6V-- 50ns
0
50‰ 50‰
0.01 F D.U.T
IF=10mA 0.1Irp
Irp
trr
2k‰
82599 GI IM 63098HA(KT) / 31497 GI / N151MH, (KOTO)
1 : Cathode
2 : Cathode
3 : Cathode
4 : Anode
5 : Anode
6 : Anode
123
654
1 : Cathode
2 : Cathode
3 : Cathode
4 : Anode
5 : Anode
6 : Anode
SANYO : TCP6
2.8
0.3
1.6
1.1
2.9
0.95 0.8
0.3 to 0.6
0 to 0.1
1.9
0.95
123
654
0.15
FC903
No.3869-2/2
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of August, 1999. Specifications and information herein are subject
to change without notice.
2
5
0.01
0.1
2
5
1.0
2
5
10
2
5
100
2
5
1000
5
7
1.0
2
3
5
7
10
2
3
5
7
100
2
5
0.001
0.01
2
5
0.1
2
5
1.0
10
2
5
0.2 0.4 0.6 0.8 1.2 1.60
23 57
0.1 1.0 23 57
10 23 57
100
20 40 60 80 1000
Forward Voltage, VF -- V
IF -- VF
Forward Current, IF -- mA
Forward Current, IF -- mA
trr -- IF
Reverse Recovery Time, trr -- ns
Rev erse Voltage, VR -- V
IR -- VR
Reverse Current, IR -- µA
Ta=100°C
Ta=100°C
25°C
--25°C
75°C
50°C
25°C
2.4
2.0
1.2
1.6
0.8
0.4
023 57
0.1 23 57
1.0 23 57
10 2
100
Rev erse Voltage, VR -- V
C -- VR
Interterminal Capacitance, C -- pF
f=1MHz
ID01119 ID01120
ID01121 ID01122
PS
