MC3403, MC3303 Single Supply Quad Operational Amplifiers The MC3403 is a low cost, quad operational amplifier with true differential inputs. The device has electrical characteristics similar to the popular MC1741C. However, the MC3403 has several distinct advantages over standard operational amplifier types in single supply applications. The quad amplifier can operate at supply voltages as low as 3.0 V or as high as 36 V with quiescent currents about one third of those associated with the MC1741C (on a per amplifier basis). The common mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. The output voltage range also includes the negative power supply voltage. http://onsemi.com MARKING DIAGRAMS 14 14 1 Features * * * * * * * * * * * * SOIC-14 D SUFFIX CASE 751A MC3x03DG AWLYWW 1 Short Circuit Protected Outputs Class AB Output Stage for Minimal Crossover Distortion True Differential Input Stage Single Supply Operation: 3.0 V to 36 V Split Supply Operation: 1.5 V to 18 V Low Input Bias Currents: 500 nA Max Four Amplifiers Per Package Internally Compensated Similar Performance to Popular MC1741C Industry Standard Pin-outs ESD Diodes Added for Increased Ruggedness Pb-Free Packages are Available 14 PDIP-14 P SUFFIX CASE 646 14 MC3x03P AWLYYWWG 1 x = 3 or 4 A = Assembly Location WL = Wafer Lot YY, Y = Year WW = Work Week G = Pb-Free Package 1 PIN CONNECTIONS Single Supply 3.0 V to 36 V VCC Split Supplies Out 1 1 VCC 1 1 1.5 V to 18 V 2 Inputs 1 3 2 2 3 3 4 4 VEE, GND VCC 1.5 V to 18 V + 1 4 - 13 + 12 4 5 Inputs 2 VEE 14 Out 4 6 Inputs 4 VEE/GND 11 + 2 - 3 + - Out 2 7 10 Inputs 3 9 8 Out 3 (Top View) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 2012 January, 2012 - Rev. 11 1 Publication Order Number: MC3403/D MC3403, MC3303 ORDERING INFORMATION Device Shipping Package MC3303D SOIC-14 MC3303DG SOIC-14 (Pb-Free) MC3303DR2 SOIC-14 MC3303DR2G SOIC-14 (Pb-Free) MC3303P PDIP-14 MC3303PG PDIP-14 (Pb-Free) MC3403D SOIC-14 MC3403DG SOIC-14 (Pb-Free) MC3403DR2 SOIC-14 MC3403DR2G SOIC-14 (Pb-Free) MC3403P PDIP-14 MC3403PG PDIP-14 (Pb-Free) 55 Units / Rail 2500 Tape & Reel 25 Units / Rail 55 Units / Rail 2500 Tape & Reel 25 Units / Rail For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. MAXIMUM RATINGS Rating Symbol Value VCC VCC, VEE 36 18 Input Differential Voltage Range (Note 1) VIDR 36 Vdc Input Common Mode Voltage Range (Notes 1 and 2) VICR 18 Vdc Storage Temperature Range Tstg -55 to +125 C Operating Ambient Temperature Range TA Power Supply Voltages Single Supply Split Supplies MC3303 MC3403 Junction Temperature TJ -40 to +85 0 to +70 150 Unit Vdc C C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Split power supplies. 2. For supply voltages less than 18 V, the absolute maximum input voltage is equal to the supply voltage. http://onsemi.com 2 MC3403, MC3303 ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = -15 V for MC3403; VCC = +14 V, VEE = GND for MC3303 TA = 25C, unless otherwise noted.) MC3403 MC3303 Symbol Min Typ Max Min Typ Max Unit Input Offset Voltage TA = Thigh to Tlow (Note 3) VIO - - 2.0 - 10 12 - - 2.0 - 8.0 10 mV Input Offset Current TA = Thigh to Tlow IIO - - 30 - 50 200 - - 30 - 75 250 nA 20 15 200 - - - 20 15 200 - - - Characteristic Large Signal Open Loop Voltage Gain VO = 10 V, RL = 2.0 k TA = Thigh to Tlow AVOL V/mV Input Bias Current TA = Thigh to Tlow IIB - - -200 - -500 -800 - - -200 - -500 -1000 nA Output Impedance f = 20 Hz zo - 75 - - 75 - Input Impedance f = 20 Hz zi 0.3 1.0 - 0.3 1.0 - M 12 10 10 13.5 13 - - - - 12 10 10 12.5 12 - - - - Output Voltage Range RL = 10 k RL = 2.0 k RL = 2.0 k, TA = Thigh to Tlow VO V Input Common Mode Voltage Range VICR +13 V -VEE +13 V -VEE - +12 V -VEE +12.5 V -VEE - V Common Mode Rejection RS 10 k CMR 70 90 - 70 90 - dB Power Supply Current (VO = 0) RL = ICC, IEE - 2.8 7.0 - 2.8 7.0 mA ISC 10 20 45 10 30 45 mA Positive Power Supply Rejection Ratio PSRR+ - 30 150 - 30 150 V/V Negative Power Supply Rejection Ratio PSRR- - 30 150 - 30 150 V/V Average Temperature Coefficient of Input Offset Current TA = Thigh to Tlow IIO/T - 50 - - 50 - pA/C Average Temperature Coefficient of Input Offset Voltage TA = Thigh to Tlow VIO/T - 10 - - 10 - V/C Power Bandwidth AV = 1, RL = 10 k VO = 20 V(p-p), THD = 5% BWp - 9.0 - - 9.0 - kHz Small-Signal Bandwidth AV = 1, RL = 10 k VO = 50 mV BW - 1.0 - - 1.0 - MHz Slew Rate AV = 1, Vi = -10 V to +10 V SR - 0.6 - - 0.6 - V/s Rise Time AV = 1, RL = 10 k VO = 50 mV tTLH - 0.35 - - 0.35 - s Fall Time AV = 1, RL = 10 k VO = 50 mV tTLH - 0.35 - - 0.35 - s Overshoot AV = 1, RL = 10 k VO = 50 mV os - 20 - - 20 - % Phase Margin AV = 1, RL = 2.0 k, VO = 200 pF m - 60 - - 60 - - - 1.0 - - 1.0 - % Individual Output Short-Circuit Current (Note 4) Crossover Distortion (Vin = 30 mVpp,Vout= 2.0 Vpp, f = 10 kHz) 3. MC3303: Tlow = -40C, Thigh = +85C, MC3403: Tlow = 0C, Thigh = +70C 4. Not to exceed maximum package power dissipation. http://onsemi.com 3 MC3403, MC3303 ELECTRICAL CHARACTERISTICS (VCC = 5.0 V, VEE = GND, TA = 25C, unless otherwise noted.) MC3403 MC3303 Symbol Min Typ Max Min Typ Max Unit Input Offset Voltage VIO - 2.0 10 - - 10 mV Input Offset Current IIO - 30 50 - - 75 nA Input Bias Current IIB - -200 -500 - - -500 nA Large Signal Open Loop Voltage Gain RL = 2.0 k AVOL 10 200 - 10 200 - V/mV Power Supply Rejection Ratio PSRR - - 150 - - 150 V/V 3.3 VCC-2.0 3.5 VCC-1.7 - - 3.3 VCC-2.0 3.5 VCC-1.7 - - Characteristic Output Voltage Range (Note 5) RL = 10 k, VCC = 5.0 V RL = 10 k, 5.0 VCC 30 V VOR Power Supply Current ICC - 2.5 7.0 - 2.5 7.0 mA Channel Separation f = 1.0 kHz to 20 kHz (Input Referenced) CS - -120 - - -120 - dB 5. Output will swing to ground with a 10 k pull down resistor. Output Q19 VCC Q18 Q27 Q20 Q17 Q23 Q16 40 k 5.0 pF Q29 31k Q28 Q1 + Q22 Q24 Q2 Q6 Q5 Q3 Q4 Q13 37 k Q25 Q21 Q15 2.0 k Q9 Inputs - Bias Circuitry Common to Four Amplifiers Q12 Q10 Q7 60 k Q11 25 Q30 2.4 k Q8 VEE (GND) Figure 1. Representative Schematic Diagram (1/4 of Circuit Shown) http://onsemi.com 4 Vpp MC3403, MC3303 CIRCUIT DESCRIPTION 5.0 V/DIV stage performs not only the first stage gain function but also performs the level shifting and Transconductance reduction functions. By reducing the Transconductance, a smaller compensation capacitor (only 5.0 pF) can be employed, thus saving chip area. The Transconductance reduction is accomplished by splitting the collectors of Q24 and Q22. Another feature of this input stage is that the input common mode range can include the negative supply or ground, in single supply operation, without saturating either the input devices or the differential to single-ended converter. The second stage consists of a standard current source load amplifier stage. The output stage is unique because it allows the output to swing to ground in single supply operation and yet does not exhibit any crossover distortion in split supply operation. This is possible because Class AB operation is utilized. Each amplifier is biased from an internal voltage regulator which has a low temperature coefficient, thus giving each amplifier good temperature characteristics as well as excellent power supply rejection. 20 s/DIV Figure 2. Inverter Pulse Response The MC3403/3303 is made using four internally compensated, two-stage operational amplifiers. The first stage of each consists of differential input device Q24 and Q22 with input buffer transistors Q25 and Q21 and the differential to single ended converter Q3 and Q4. The first 120 50 mV/DIV 0.5 V/DIV A VOL , LARGE SIGNAL OPEN LOOP VOLTAGE GAIN (dB) AV = 100 80 60 40 20 0 -20 *Note Class A B output stage produces distortion less sinewave. VCC = 15 V VEE = -15 V TA = 25C 100 1.0 10 50 s/DIV Figure 3. Sine Wave Response VO, OUTPUT VOLTAGE RANGE (V pp) VO, OUTPUT VOLTAGE (Vpp ) +15 V 20 VO + -15 V 10 k 15 10 5.0 TA = 25C 0 -5.0 1.0 k 100 k 1.0 M Figure 4. Open Loop Frequency Response 30 25 100 1.0 k 10 k f, FREQUENCY (Hz) 10 k 100 k f, FREQUENCY (Hz) TA = 25C 30 20 10 0 1.0 M 0 Figure 5. Power Bandwidth 2.0 4.0 6.0 8.0 10 12 14 16 18 VCC AND (VEE), POWER SUPPLY VOLTAGES (V) 20 Figure 6. Output Swing versus Supply Voltage http://onsemi.com 5 MC3403, MC3303 I IB, INPUT BIAS CURRENT (nA) I IB , INPUT BIAS CURRENT (nA) VCC = 15 V VEE = -15 V TA = 25C 300 200 100 -75 -55 -35 -15 5.0 25 45 65 85 170 160 150 105 125 0 2.0 4.0 6.0 8.0 10 12 14 16 18 T, TEMPERATURE (C) VCC AND (VEE), POWER SUPPLY VOLTAGES (V) Figure 7. Input Bias Current versus Temperature Figure 8. Input Bias Current versus Supply Voltage VCC 50 k 1N914 VCC 10 k R2 - 5.0 k 1/2 MC3403 + 1N914 VCC 10 k VO Vref - 1/2 10 k R1 fo = 1 Vref = VCC 2 R1 VO = R1 +R2 R VO = R 1 V 2 CC Figure 9. Voltage Reference + e1 1/2 1 R C e2 For: fo = 1.0 kHz R = 16 k C = 0.01 F C Hysteresis R2 VOH R Vref - a R1 1/2 MC3403 + b R1 - 1/2 MC3403 + C 1 2RC Figure 10. Wien Bridge Oscillator MC3403 - R1 VO MC3403 + R1 1/2 MC3403 + Vin eo - VO VO VOL VinL 1 R C VinL= R1 (VOL -Vref) +Vref R1 +R2 VinH= R1 (VOH -Vref) +Vref R1 +R2 Vh= R1 (VOH -VOL) R1 +R2 R eo = C (1 +a +b) (e2 -e1) Figure 11. High Impedance Differential Amplifier Figure 12. Comparator with Hysteresis http://onsemi.com 6 VinH Vref 20 MC3403, MC3303 R R C1 Vin 100 k C R2 - fo = R1 = QR C 1/2 - MC3403 + 100 k 1/2 1/2 MC3403 + Vref R1 R2 Bandpass Output = 1.0 kHz = 10 =1 =1 Where: - 1 V 2 CC R = 160 k C = 0.001 F R1 = 1.6 M R2 = 1.6 M R3 = 1.6 M C1 Notch Output MC3403 + TBP = center frequency gain TN = passband notch gain Vref = Vref R3 1/2 For: fo Q TBP TN R2 = R1 TBP R3 = TNR2 C1 = 10 C - MC3403 + Vref 1 2RC Vref Figure 13. Bi-Quad Filter VCC C R1 Vin Vref = 1/2 R2 Triangle Wave Output R3 MC3403 - 75 k + R1 100 k Vref C Vref 300 k 1/2 1/2 MC3403 - Given: Square Wave Output R1 +RC 4 CRf R1 if R3 = CO = 10 C Vref = 1 V 2 CC fo = center frequency A(fo) = gain at center frequency Choose value fo, C Then: R3 = Q fo C R1 = R3 2 A(fo) R2 = R1 R5 4Q2 R1 -R5 Oo fo For less than 10% error from operational amplifier < 0.1 BW where fo and BW are expressed in Hz. If source impedance varies, filter may be preceded with voltage follower buffer to stabilize filter parameters. Rf f= VO MC3403 + R2 Vref CO - 1 V 2 CC + C R3 R2 R1 R2 +R1 Figure 14. Function Generator Figure 15. Multiple Feedback Bandpass Filter http://onsemi.com 7 MC3403, MC3303 PACKAGE DIMENSIONS SOIC-14 CASE 751A-03 ISSUE H NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. -A- 14 8 -B- P 7 PL 0.25 (0.010) M 7 1 G -T- D 14 PL 0.25 (0.010) T B S A DIM A B C D F G J K M P R J M K M F R X 45 _ C SEATING PLANE B M S SOLDERING FOOTPRINT* 7X 7.04 14X 1.52 1 14X 0.58 1.27 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 8 MILLIMETERS MIN MAX 8.55 8.75 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.337 0.344 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.228 0.244 0.010 0.019 MC3403, MC3303 PACKAGE DIMENSIONS PDIP-14 CASE 646-06 ISSUE P 14 8 1 7 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. B A F L N C -T- SEATING PLANE H G D 14 PL J K 0.13 (0.005) M DIM A B C D F G H J K L M N INCHES MIN MAX 0.715 0.770 0.240 0.260 0.145 0.185 0.015 0.021 0.040 0.070 0.100 BSC 0.052 0.095 0.008 0.015 0.115 0.135 0.290 0.310 --- 10 _ 0.015 0.039 MILLIMETERS MIN MAX 18.16 19.56 6.10 6.60 3.69 4.69 0.38 0.53 1.02 1.78 2.54 BSC 1.32 2.41 0.20 0.38 2.92 3.43 7.37 7.87 --- 10 _ 0.38 1.01 M ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 9 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MC3403/D