EX-2090-DAE-10BN-40M0000000 - Vectron International

Previous Vectron Model Numbers EX-245 Series

Frequency Range 10 MHz – 40 MHz

Standard Frequencies 10, 20 MHz

Parameter Min Typ Max Units Operating temp range

vs. operating temperature range -50 +50 ppb 0 … +60°C

Options5

(Referenced to +25°C) -75 +75 ppb -20 … +70°C

-100 +100 ppb -40 … +85°C

Parameter Min Typ Max Units Condition

EX-209

Hi-Reliability Evacuated Miniature Crystal Oscillator

Frequency stabilities1 [10 to 20 MHz]

Severe Environmental Conditions

16 pin Double Dip Package

Ruggedized hybrid thick ﬁ lm construction

Low Power Consumption

Features Typical Applications

http://www.vectron.com

Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1

Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100

Initial tolerance For Fixed Freq.

Settability

vs. supply voltage change

vs. load

vs. aging / day

vs aging / 1 year

vs. aging /10 year

-1

-0.2

-15

-2

-200

-1000

-1500

-2000

+0.2

+15

+200

+1000

+1500

+2000

ppm

ppb

Fixed, no adjust option

VS ± 5%

Load ± 5%

after 7 days of operation

10 to <12MHz

12 to <16MHz

16 to 20MHz

Warm-up Time 120 seconds to ± 1ppm of ﬁ nal freq. @+25°C

180 seconds to ± 100ppb of ﬁ nal freq. @+25°C

EX-209

Frequency Tuning (EFC)

RF Output

Supply Voltage (Vs)

http://www.vectron.com

Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1

Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100

Parameter Min Typ Max Units Operating temp range

vs. operating temperature range -75 +75 ppb 0 … +70°C

Options5

(Referenced to +25°C) -100 +100 ppb -20 … +70°C

-150 +150 ppb -40 … +85°C

Parameter Min Typ Max Units Condition

Initial tolerance For Fixed Freq.

Settability

vs. supply voltage change

vs. load

vs. aging / day

vs aging / 1 year

vs. aging /10 year

-1.5

-0.3

-25

-3

-300

-3000

+1.5

+0.3

+25

+300

+3000

ppm

ppb

Fixed, no adjust option

VS ± 5%

Load ± 5%

after 7 days of operation

Warm-up Time 120 seconds to ± 1ppm of ﬁ nal freq. @+25°C

180 seconds to ± 100ppb of ﬁ nal freq. @+25°C

Parameter Min Typ Max Units Condition

Supply voltage [Standard] 4.75 5 5.25 VDC

Power consumption 2.2 Watts during warm-up

0.7 Watts steady state @ +25°C

Parameter Min Typ Max Units Condition

Signal [Standard] HCMOS

Load 15 pF

Signal Level (Vol) 0.1 VDC

Signal Level (Voh) 0.9 VDC

Rise/Fall Time +7 ns (10-90%)

Duty cycle 40 60 % @ (Voh-Vol)/2

Signal [Option] Sinewave

Load 50 Ω

Output Power [Standard]

Output Power [Option]

Harmonics

Spurious

0.0

3.0

+2.0

+5.0

4.0

7.0

-25

-60

dBm

dBc

50 Ohm load

Parameter Min Typ Max Units Condition

Tuning Range Fixed, No Adjust

Options5

Tuning Range Sufﬁ cient to compensate for 10 years aging EFC (0V to 4V)

Vref 4.0 4.1 4.2 Vdc Source Current 1mA maximum

Frequency stabilities1 [>20 to 40 MHz]

http://www.vectron.com

Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1

Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100

Environmental Conditions (Designed to meet)

Additional Parameters1 [10 to 20 MHz]

Additional Parameters1 [>20 to 40 MHz]

Parameter Max. Units Condition

Phase Noise -100 dBc/Hz 10 Hz 10 to 20 MHz

-125 dBc/Hz 100 Hz

-140 dBc/Hz 1 kHz

-145 dBc/Hz 10 kHz

-145 dBc/Hz 100 kHz

G-Sensitivity 1 x 10-9 /g Test at 10g sine vibration at 100Hz

Parameter Max. Units Condition

Phase Noise -90 dBc/Hz 10 Hz > 20 to 40 MHz

-115 dBc/Hz 100 Hz

-130 dBc/Hz 1 kHz

-140 dBc/Hz 10 kHz

-140 dBc/Hz 100 kHz

G-Sensitivity 1 x 10-9 /g Test at 10g sine vibration at 100Hz

• Radiation Tolerant (operating): Active devices are selected from a family of product that is inherently

radiation tolerant to meet 100krad (SI) total dose

• Mechanical Shock (survive)***: MIL-STD-202, Test Method 213, Condition E (1000G, 0.5msec)

• Vibration Random (survive)***: MIL-STD-202, Test Method 214, Condition I-F (20Grms, 3 minutes/axis)

• Vibration Sine (survive)***: MIL-STD-202, Test Method 204, Condition D (20Grms, 20 minutes/axis)

Note: *** Met by design, not tested

Ordering Code S B

Test Inspection S-Level Screening B-Level Screening

Nondestructive Bond Pull MIL-STD-883

Method 2023 N/A

Internal Visual Per Mil-PRF-55310

Requirement

Internal Visual Per Mil-PRF-55310

Requirement

Internal Visual Per Mil-PRF-55310

Requirement

Stabilization Bake

MIL-STD-883

Method 1008,

Condition C

150oC for 48hrs

MIL-STD-883

Method 1008,

Condition C

150oC for 48hrs

Thermal Shock

MIL-STD-883

Method 1011,

Condition A

0oC to 100oC for

15cycles N/A

Temperature Cycling (1)

MIL-STD-883

Method 1010,

Condition A

-55oC to 85oC (2)

for 10cycles

MIL-STD-883

Method 1010,

Condition A

-55oC to 85oC (2)

for 10cycles

Constant Acceleration (1) MIL-STD-883

Method 2001

1000g’s (3)

Y1 Only

MIL-STD-883

Method 2001

1000g’s (3)

Y1 Only

Seal (Fine & Gross Leak) (1) N/A (Vacuum Seal) N/A (Vacuum Seal)

PIND

MIL-STD-883

Method 2020,

Condition B

10g peak at 60Hz

minimum N/A

Electrical Test Per Mil-PRF-55310 Requirement Per Mil-PRF-55310 Requirement

Burn-in (1) 85oC (2) for 240hrs 85oC (2) for 240hrs

Electrical Test Per Mil-PRF-55310 Requirement Per Mil-PRF-55310 Requirement

Radiographic MIL-STD-883

Method 2012 N/A

Note:

(1) These test inspections deviate from screening requirements for class 2 oscillator in MIL-PRF-55310.

(2) The maximum operating and storage temperature of the EX-245 is +85oC. The EX-245 shall not be exposed to temperature higher than

+85oC at length of time.

(3) The design and construction of the EX-245 can withstand up to 1000g’s constant acceleration

http://www.vectron.com

Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1

Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100

Screening Options

Pin Function

Pin # With EFC Fixed Frequency

1 EFC No Connection

2-4 No Connection No Connection

8 Case/GND Case/GND

9 Output Output

13-14 No Connection No Connection

15 Vref No Connection

16 Supply Supply

**Pin numbers are for reference

150

183

220

60s

60-90s

45-60s

TIME (s)

TEMPERATURE (oC)

Reflow Profile

Package Outline

http://www.vectron.com

Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1

Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100

How to order this product:

http://www.vectron.com

Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1

Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100

Use this worksheet to forward the following information to your factory representative :

Model Height - Supply Voltage

Code

RF Output

Code

Temperature

Range -

Stability Option - Frequency

EX-209 0 - D A J - 20S S - 10M0000000

Notes:

1 Contact factory for improved stabilities or additional product options. Not all options and codes are

available at all frequencies.

2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply

voltage, frequency control voltage, load, temperature (25°C)

3 Phase noise degrades with increasing output frequency.

4 Subject to technical modiﬁ cation.

5 Contact factory for availability.

Supply Voltage Code:

D: 5 V

Temperature Range:

S: 0 ... +60°C

J: -20...+70°C

E: -40...+85°C

Height:

0: 8.9 mm

Stability (1st digit):

0: ±50ppb

1: ±75ppb

2: ±100ppb

3: ±150ppb

Tuning Option (2nd digit):

0: No Tuning

1: Sufﬁ cient for 10 years aging

Screening Option (3rd digit):

S: “S” Level Screening

B: “B” Level Screening

E: “EM” Engineering Model

P: Proof of Design “POD-Prototype”

RF Output Code:

A: HCMOS

E: Sinewave (0 dBm)

G: Sinewave (+3 dBm)

Frequency Control:

S: Swept Quartz

N: Non-Swept Quartz

Model Code:

209: Type A