SanDisk Double Density Flash Products are ideal for applications requiring high capacity and low cost storage. The SanDisk Double Density (D2) Flash Series introduces SanDisk's new generation of flash memory technology that provides a lower price per megabyte and higher storage capacities. D2 technology represents a significant breakthrough in cost reduction of solid state digital storage. By storing two logical bits of information within a single physical Flash cell storage site, D2 offers double the storage density per cell. SanDisk D2 Flash products have much higher storage capacities and significantly faster read performance than SanDisks rt other flash products. The read performance of D2 Flash products is 50 percent faster than SanDisks 32Mb products. This is due to the concurrent sensing of all four distinct states of the flash memory cel! rather than the traditional 0 and 1 states of binary flash memory cells. Because writing data to Double Density Flash memory requires programming each flash memory cell to one of the four distinct states, write performance is approximately one fourth the write speed of SanDisk's 32 Mb flash products. Future generations of D2 products will exceed the write rates of non-D2 Flash. D2 Flash products are ideal storage for applications which require low cost and high capacity. SanDisk Double Density Flash products provide up to 300MB of formatted storage capacity ina Type I!l form factor, 150MB in a Type Ii form factor and 20MB in the CompactFlash (CF) form factor. SanDisk and CompactFlash are trademarks of SanDisk. All other trademarks or registered trademarks are property of their respective owners. 1997 SanDisk corporation. 2/97 Specifications and product offerings subject to change without notice SanDisk Sales Offices Western Region USA & Canada 140 Caspian Court Sunnyvale, CA 94089 Phone: 408-542-0573 Fax: 408-542-0403 Central Region USA & Canada 4900 Blazer Parkway Dublin, OH 43017 Phone: 614-760-3700 Fax: 614-760-3701 Eastern Region USA & Canada 620 Herndon Parkway, Suite 200 Herndon, VA 22070 Phone: 703-481-9828 Fax: 703-437-9215 Southern Region USA & Canada 101 Southhall Lane, Suite 400 Maitiand, FL 32751 Phone: 407-667-4880 Fax: 407-667-4834 European Sales Office SanDisk GmbH Karlsruher Str. 2C D-30519 Hannover, Germany Phone: 49-511-8759185 Fax: 49-511-8759187 Japan Sales Office SanDisk K.K., Japan SanDisk, Lid. (Japan) 5F Nisso Bldg. 11 2-3-4 Shin-Yokohama, Kohoku-ku Yokohama 222 Phone: 81-45-474-0181 Fax: 81-45-474-0371 Asia/Pacific Rim Sales Office Flat B, 3/F, Harrison Court (V) 8 Man Wan Road Waterloo Hill, Kowloon Hong Kong Phone: 852-2712-0501 Fax: 852-2712-9385 Saisk 74 140 Caspian Court Sunnyvale, CA 94089 Phone: 408-542-0500 Fax: 408-542-0503 htip:/Awww.sandisk.comInterface System Performance (Notes 1 & 2) Start-up Time Sleep to Write Sleep to Read Reset to Ready Data Transter Rate to Flash Data Transfer Rate from Flash Data Transfer Rate to/from Host Delay Active to Sieep Controller Overhead Command to DRQ Power Requirements (Note1) DC Input Voltage Commercial Industrial Typical Power Dissipation (Notes 3 & 4) Sleep Read Write Environmental Specifications Temperature Operating Commercial Operating Industrial Non-Operating Commercial Non-Operating Industrial Humidity Operating Non-Operating Acoustic Noise (at 1 meter) Vibration Operating Non-Operating Shock Operating Non-Operating Reliability and Maintenance MTBF (Mean Time Between Failures) Preventive Maintenance Data Reliability Physical Specifications Length Width Thickness (Body) Thickness (Removable Edge) Weight Order Model # Where X: Note 1: All values quoted are typical at ambient temperature and nominal supply voltage unless otherwise stated. D2 CompactFlash! PC Card ATA and True 1IDE Mode 2.5 msec max. 2.0 msec max. 50 msec typical, 400 msec max. 4.0 MB/sec burst 8.0 MB/sec burst 8.0 MB/sec burst Programmable <1.25 msec 5V + 10%, 3.3V4 5% 5V + 5% 200 WA (3.3V) 500 pA (5V) 32-45 mA (3.3V) 46-75 mA (5V) 32-60 mA (3.3V) 46-90 mA (SV) 0- 60C -40 - 85C (5V) 25 -85C 50 - 100C (5V) 8 - 95%, non-condensing 8 - 95%, non-condensing 0 dB 15 G peak to peak max. 15 G peak to peak max. 2000 G max. 2000 G max. > 1,000,000 hours None <1 non-recoverable error in 10" bits read CompactFlash 1.433 in (36.4 mm) CE Adapter 3.370 in (85.6 mm) 1.685 in (42.8 mm) 2.126 in (54.0 mm) 0.130 in (3.30 mm) 0.1968 in (5.0 mm) 0.155 in (3.94 mm) N/A 0.40 oz (11.4 g) 1.16 oz (33 g) ~ SDCFCX-YY-22Z CompaciFiash _ SDCF-03 CF Adapter_ | Industrial temp. grade Standard temp. grade _ 7 7.0MB 10 10.0 MB 20 10.4 MB _ 101. Standard Note 2: All performance timing assumes the controller is in the default (i.e., fastest) mode. D2 Type i PC Card ATA and True {DE Mode 2.5 msec max. 2.0 msec max. 50 msec typical, 400 msec max. 4.0 MB/sec burst 8.0 MB/sec burst 8.0 MB/sec burst Programmable <1.25 msec 5V + 10%, 3.3V + 5% 5V+ 5% 200 pA (3.3V) 500 pA (5V) 32-45 mA (3.3V) 46-75 mA (5V) 32-60 mA (3.3V) 46-90 mA (5V) 0- 60C 40 - 85C (5V) ~25 - 85C 50 - 100C (5V) 8 - 95%, non-condensing 8 - 95%, non-condensing 0dB 15 G peak to peak max. 15 G peak to peak max. 1000 G max. 1000 G max. >1,000,000 hours None <1 non-recoverable error in 10" bits read 3.370 + .008 in (85.6 + 0.20 mm) 2.126 + .004 in (54.0 + 0.10 mm) .1968 in (5.0 mm max.) N/A 1160z (33g), 1.3402 (38g), 1.520z (43g) max. SDP3CX-YY-ZZZ | __ Industrial temp. grade _..... standard temp, grade. 7 7.0 MB 40 40.1 MB 10 10.0 MB 85 85.2MB 20 20.1 MB 150 150.2 MB 101 Standard nn Note 3: Sleep mode currently is specified under the condition that all card inputs are static CMOS levels and in a Not Busy operating state. D2 Type IH PC Card ATA and True DE Mode 2.5 msec max. 2.0 msec max. 50 msec typical, 400 msec max. 4.0 MB/sec burst 8.0 MB/sec burst 8.0 MB/sec burst Programmable <1.25 msec SV + 10%, 3.3V 4 5% 5V + 5% 200 yA (3.3V) 500 pA (5V) 32-50mA (3.3V) 46-90mA (5V) 32-60mA (3.3V) 46-110mA (5V) G- 60C ~40 - 85C (5V) -25 - 85C -50 - 100C 8 - 95%, non-condensing 8 - 95%, non-condensing 0B 15 G peak to peak max. 15 G peak to peak max. 1000 G max. 1000 G max. >1,000,000 hours None <1 non-recoverable error in 10 bits read 3.370 + .008 in (85.6 + 0.20 mm) 2.126 + .004 in (54.0 + 0.10 mm) 413 in (10.5 mm max.) N/A 3.20z (90g) max. SDP3CX-YY-ZZZ 1 "Industrial temp. grade coos v.,, Standard temp. grade 300 300.3 MB 101 Standard Nate -t: The currents specified show the bounds of programmability of the product.