SCC Series High Capacitance Cylindrical SuperCapacitors The new series of cylindrical electrochemical double-layer capacitors offers excellent pulse power handling characteristics based on the combination of very high capacitance and very low ESR. Used by themselves or in conjunction with primary or secondary batteries, they provide extended back up time, longer battery life, and provide instantaneous power pulses as needed. Offers great solutions to Hold Up, Energy Harvesting, and Pulse Power Applications. FEATURES APPLICATIONS * * * * * * * * * * * * Cap Values from 1F - 3000F High pulse power capability Low ESR Low Leakage Current Camera Flash Systems Energy Harvesting GSM/GPRS Pulse Applications UPS/Industrial Wireless Alarms Remote Metering Scanners Toys and Games HOW TO ORDER SCC R 12 B 105 P R B _ Series SuperCap Cylindrical Diameter Q = 6.3mm R = 8mm S = 10mm T = 12.5mm U = 16mm V = 18mm W = 22mm X = 30mm Y = 35mm Z = 60mm Case Length Two digits represent case length in mm, with the exception of the following: 1E = 138mm Voltage Code B = 2.7V Capacitance Code 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) in F Tolerance P = +100%/-0% S = +30%/-10% Lead Format R = Radial S = Solder Pin N = Snap-in C = Weldable Lug W = Screw Package B = Bulk A = Ammo* T = Tray** Custom Code A1= 4mm Bent Leads* C1 = 2mm Bent Leads* * Inquire about availability for Radial Leads only **Inquire about availability QUALITY INSPECTIONS TERMINATION Parts are tested for Life Cycle, high temperature load life, temperature characteristics, vibration resistance, and humidity characteristics. See page 2 for more information. These SuperCapacitors are compatible with hand soldering and wave soldering processes, so long as appropriate precautions are followed. See "Soldering Recommendations" on page 5 for more information. OPERATING TEMPERATURE -40C to +65C @ 2.7V -40C to +85C @ 2.3V LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 102120 1 SCC Series High Capacitance Cylindrical SuperCapacitors RATING & PART NUMBER REFERENCE AVX Part Number Diameter (mm) Length (mm) Rated Capacitance (F) Capacitance Tolerance Rated Voltage (V) SCCQ12B105PRB 6.3 12 1 +100%/-0% 2.7/2.3* SCCR12B105PRB 8 12 1 +100%/-0% 2.7/2.3* SCCQ15B125SRB 6.3 15 1.2 +30%/-10% SCCR16B205PRB 8 16 2 SCCR20B335PRB 8 20 Rated Temperature (C) DCL Max @ 72 Hrs (A) ESR Max @ 1000 Hz (m) ESR Max @ DC (m) Peak Current (A) Power Density (W/kg) Max Energy (Wh) Energy Density (Wh/kg) 65/85* 6 200 500 0.90 2692 0.0010 1.56 65/85* 6 150 500 0.90 1842 0.0010 1.07 2.7/2.3* 65/85* 6 240 620 0.93 1933 0.0012 1.66 +100%/-0% 2.7/2.3* 65/85* 10 100 360 1.57 2113 0.0020 1.76 3.3 +100%/-0% 2.7/2.3* 65/85* 12 95 290 2.28 2080 0.0033 2.30 Radial Lead SCCR25B505PRB 8 25 5 +100%/-0% 2.7/2.3* 65/85* 15 85 220 3.21 2339 0.0051 2.98 SCCS20B505PRB 10 20 5 +100%/-0% 2.7/2.3* 65/85* 15 70 180 3.55 2314 0.0051 2.41 SCCS25B705PRB 10 25 7 +100%/-0% 2.7/2.3* 65/85* 20 60 150 4.61 2243 0.0071 2.73 SCCS30B106PRB 10 30 10 +100%/-0% 2.7/2.3* 65/85* 30 40 75 7.71 3763 0.0101 3.27 SCCT20B106PRB 12.5 20 10 +100%/-0% 2.7/2.3* 65/85* 30 50 75 7.71 3431 0.0101 2.98 SCCS30B126SRB 10 30 12 +30%/-10% 2.7/2.3* 65/85* 30 50 75 8.53 3812 0.0122 3.97 SCCT30B156SRB 12.5 30 15 +30%/-10% 2.7/2.3* 65/85* 50 35 80 9.20 2430 0.0152 3.38 SCCT30B186SRB 12.5 30 18 +30%/-10% 2.7/2.3* 65/85* 55 40 60 11.68 3378 0.0182 4.93 SCCT35B226SRB 12.5 35 22 +30%/-10% 2.7/2.3* 65/85* 58 34 58 13.05 2631 0.0223 3.89 SCCU25B256SRB 16 25 25 +30%/-10% 2.7/2.3* 65/85* 60 27 50 15.00 2397 0.0253 3.47 SCCU30B356SRB 16 30 35 +30%/-10% 2.7/2.3* 65/85* 70 20 40 19.69 2514 0.0354 4.07 5.40 SCCT47B406SRB 12.5 47 40 +30%/-10% 2.7/2.3* 65/85* 75 19 29 25.00 4022 0.0405 SCCV40B506SRB 18 40 50 +30%/-10% 2.7/2.3* 65/85* 75 18 20 33.75 3365 0.0506 3.89 SCCV60B107SRB 18 60 100 +30%/-10% 2.7/2.3* 65/85* 260 15 18 48.21 2430 0.1013 5.06 SCCW45B107SSB 22 45 100 +30%/-10% 2.7/2.3* 65/85* 260 8 12 61.36 3391 0.1013 4.71 SCCX50B207SSB 30 50 200 +30%/-10% 2.7/2.3* 65/85* 600 6 9 96.43 2461 0.2025 5.13 SCCY62B307SSB 35 62 300 +30%/-10% 2.7/2.3* 65/85* 650 6 9 109.46 1262 0.3038 3.94 SCCY68B407SSB 35 68 400 +30%/-10% 2.7/2.3* 65/85* 1000 4 5 180.00 2046 0.4050 4.74 1000 4 5 180.00 2430 0.4050 5.63 5200 0.2 0.29 2165.78 6033 3.0375 6.08 5200 0.2 0.29 2165.78 6033 3.0375 6.08 Solder Pin Lead Snap-In SCCY60B407SNB 35 60 400 +30%/-10% 2.7/2.3* 65/85* Cylindrical Lug Lead SCCZ1EB308SCB 60 138 3000 +30%/-10% 2.7/2.3* 65/85* Cylindrical Screw Lead SCCZ1EB308SWB 60 138 3000 +30%/-10% 2.7/2.3* 65/85* *with appropriate voltage derating operating temperature can be extended to 85C QUALIFICATION TEST SUMMARY Test Test Method Parameter Limits Life Cycle Capacitors are cycled between rated voltage and half-rated voltage under constant current at +25C for 500,000 cycles Capacitance ESR Appearance 30% of spec value 200% of spec value No remarkable defects High Temperature Load Life Voltage: Rated Voltage Capacitance ESR Appearance 30% of spec value 200% of spec value No remarkable defects Capacitance ESR Appearance 30% of spec value 200% of spec value No remarkable defects Capacitance ESR Appearance 30% of spec value 200% of spec value No remarkable defects Capacitance ESR Appearance 30% of spec value 200% of spec value No remarkable defects Storage Temperature Characteristics Vibration Resistance Temperature: +65C Test Duration: 1,000 hours Storage Duration: 2 years No Load Temperature: +35C Amplitude: 1.5mm Frequency: 10 ~ 55Hz Direction: X, Y, Z for 2 hours each Voltage: Rated Voltage Humidity RH: 90% Temperature: +60C Test Duration: 1,000 hours 2 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 111120 SCC Series High Capacitance Cylindrical SuperCapacitors QUALITY AND RELIABILITY CAPACITANCE VS. TEMPERATURE Percent of 25C Reading 200% 150% 100% 50% 0% -40C -20C 0C 20C 40C 60C 80C Percent of 25C Reading Temperature (C) 700% 600% 500% 400% 300% 200% 100% 0% -40C LEAKAGE CURRENT VS. TEMPERATURE -20C 0C 20C 40C 60C 80C 60C 80C Temperatue (C) EQUIVALENT SERIES RESISTANCE VS. TEMPERATURE Percent of 25C Reading 300% 250% 200% 150% 100% 50% 0% -40C -20C 0C 20C 40C Temperature (C) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 011519 3 SCC Series High Capacitance Cylindrical SuperCapacitors MECHANICAL SPECIFICATIONS D (mm) P (mm) d (mm) RADIAL LEAD TYPE 1F - 100F L 2.0 mm oD+1.0/-0mm RADIAL BENT LEAD TYPE 6.3 2.3 0.6 8 3.2 0.6 10 5.0 0.6 12.5 5.5 0.6 16 7.3 0.8 18 8 0.8 SOLDER PIN TYPE 4-PIN 300F, 400F PARTS oD+1.0/-0mm P 0.5 mm L 2.0 mm Style B (mm) A1 4 C1 2 Cap (F) D (mm) 300 35 L (mm) 62 400 35 68 SNAP-IN 400F PART SOLDER PIN TYPE 2 PIN 100F, 200F PART L 2mm 1.60.05mm D1.0mm 100.5mm 71.0mm Vent (-) Negative Polarity WELDABLE LUG TYPE 3000F PART 30.5mm 1382mm - 30.5mm + Vent 60 + 1.0/-0mm 34 CYLINDRICAL SCREW TYPE 3000F PART o180.1mm o160.1mm 12 1382mm 4 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 102120 SCC Series High Capacitance Cylindrical SuperCapacitors SOLDERING RECOMMENDATIONS When soldering SuperCapacitors to a PCB, the temperature & time that the body of the SuperCapacitor sees during soldering can have a negative effect on performance. We advise following these guidelines: * Do not immerse the SuperCapacitors in solder. Only the leads should come in contact with the solder. * Ensure that the body of the SuperCapacitor is never in contact with the molten solder, the PCB or other components during soldering. * Excessive temperatures or excessive temperature cycling during soldering may cause the safety vent to burst or the case to shrink or crack, potentially damaging the PCB or other components, and significantly reduce the life of the capacitor. WAVE SOLDERING Only use wave soldering on Radial type SuperCapacitors. The PCB should be preheated only from the bottom and for less than 60 seconds, with temperature at, or below, 100C on the top side of the board for PCBs equal to or greater than 0.8 mm thick. Solder Temperature (C) PRECAUTION: For all products with shrink wrap sleeves, washing in any type of cleaning agent is prohibited. During all soldering processes, it's recommended to protect the shrink wrap from any kind of liquid (including but not limited to: water, strong acid, strong alkali, strong oxidizing solutions, and strong solvents) to avoid the risk of damage, cracking, and fading of the outer shrink wrap. Suggested Solder Time (s) Maximum Solder Time (s) 220 7 9 240 7 9 250 5 7 260 3 5 HAND SOLDERING Keep distance between the SuperCapacitor body and the tip of the soldering iron and the tip should never touch the body of the capacitor. Contact between SuperCapacitor body and soldering iron will cause extensive damage to the SuperCapacitor, and change its electrical properties. It is recommended that the soldering iron temperature should be less than 350C, and contact time should be limited to less than 4 seconds. Too much exposure to terminal heat during soldering can cause heat to can cause heat to transfer to the body of the SuperCapacitor, potentially damaging the electrical properties of the SuperCapacitor. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 081220 5 SCC Series High Capacitance Cylindrical SuperCapacitors TEST METHODS IEC CAPACITANCE TEST METHOD INITIAL ESR MEASUREMENT @ 25C * Capacitance is measured using a Keithley 2400 or 2602 Meter * Procedure * Charge Capacitor to Rated Voltage at room temperature * Disconnect parts from voltage to remove charging effects * Discharge cells with a constant current I determined by 4 * C * VR * Noting V1, t1, V2, t2 and performing the calculation for C Voltage (V) * Using an Agilent 4263B LCR Meter and a Kelvin connection * Measure at frequency of 1000 Hz * Measurement Voltage of 10mV DC ESR MEASUREMENT * Six steps capacity and ESRDC Test Method is used as illustrated in the figure right. * Tests are carried out by charging and discharging the capacitor for two cycles at rated voltage and half rated voltage * C = (CDC1+CDC2) / 2 * ESRDC = (ESRDC1 + ESRDC2) / 2 Where: CDC1 = I2*(t5-t4)/(V3-V4) CDC2 = I2*(t11-t10)/V9-V10) ESRDC1 = (V5-V4)/I2 ESRDC2 = (V11-V10)/I2 I1 = I2 = 75mA/F 30 min VR V3 ESR Drop V1 V2 Cycle 2 Cycle 1 t1 t2 VR Times (s) I1 V2 V1 V8 V7 I1 V3 V9 Step 2 Step 2 Step 4 Step 4 I - Discharge Current [mA], 4 * C * VR VR - Rated Voltage V1 - Initial Test Voltage, 80% of VR Step 3 V2 - Final Test Voltage, 40% of VR Step 6 Step 1 V6 V4 t1 - Initial Test time Step 6 Step 3 V5 Step 1 V11 V10 Step 5 Step 5 t2 - Final Test time C = I * (t2 - t1) / (V1 - V2) DCL MEASUREMENT @ 25C * DCL is measured using a Multimeter with high internal impedance across a resistor * Charge Capacitor to Rated Voltage at room temperature for 72 Hours * Disconnect parts from Voltage by opening switch 1 (Stabilize for 10 Min) * Measure Voltage across a known Valued Resistor (1K Ohm) * Calculate DCL = V/R I2 0 t1 t2 t3 t4 I2 t5 t6 t7 t8 WATT DENSITY * Watt Density = (0.12*V / RDC) / mass Multimeter 6 + t11 t12 MAXIMUM OPERATING CURRENT MAXIMUM PEAK CURRENT DC Power Supply t10 * This is the maximum current when capacitor temperature rise of the capacitor during its operation is less than 15C * This is the maximum current in less than 1 sec + t9 ENERGY DENSITY * Energy density = (1/2 CV) / (3600*mass) - 1k 1 - The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 011519 SCC Series High Capacitance Cylindrical SuperCapacitors POLARITY / REVERSE VOLTAGE For product consistency and optimum performance, it is recommended that the capacitor be connected with polarity indicated. Reversing polarity could result in permanent damage to the circuit including much higher leakage current for a short duration of time and the life time of the supercapacitors will be reduced. LIFE TIME AND TEMPERATURE PERFORMANCE The life of a SuperCapacitor is impacted by a combination of operating voltage and the operating temperature according to the following equation: time to failure, t Vn * exp (-Q / k*T) ..............(1) where V is the voltage of operation, Q is the activation energy in electron volts (eV), k is the Boltzmann's constant in eV and T is the operating temperature in K (where K is in degrees Kelvin). Typical values for the voltage exponent, n, is between 2.5 - 3.5, and Q is between 1.0 - 1.2 eV in the normal operating temperature range of 40 to 65C. The industry standard for SuperCapacitor end of life is when the equivalent series resistance, ESR, increases to 200% of the original value and the capacitance drops by 30%. Typically a super-capacitance shows an initial change in the ESR value and then levels off. If the capacitors are exposed to excessive temperatures the ESR will show a continuous degradation. In the extreme case, if the temperatures or voltages are substantially higher, than the rated voltage, this will lead to cell leakage or gas leakage and the product will show a faster change in the ESR which may increase to many times the original value. Expected Lifetime at Various Voltages SCC Series, 2.7V Rated 90 80 100%Vrated (2.7V) 90%Vrated 80%Vrated 70%Vrated 70 Temperature (C) 60 50 40 30 20 10 0 0.1 1.0 10.0100.0 MTTF (years) Expected Lifetime at Various Voltages SCC Series, 2.3V Rated 90 80 100%Vrated (2.3V) 90%Vrated 80%Vrated 70%Vrated 70 Temperature (C) 60 50 40 30 20 10 0 0.1 1.0 10.0 100.0 MTTF (years) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042619 7 SCC Series High Capacitance Cylindrical SuperCapacitors SAFETY RECOMMENDATIONS REGULATORY WARNINGS * UL 810A * RoHS Compliant * Reach Compliant * To Avoid Short Circuit, after usage or test, SuperCapacitor voltage needs to discharge to 0.1V * Do not Apply Overvoltage, Reverse Charge, Burn or Heat Higher than 150C, explosion-proof valve may break open * Do not Press, Damage or disassemble the SuperCapacitor, housing could heat to high temperature causing Burns * If you observe Overheating or Burning Smell from the capacitor disconnect Power immediately, and do not touch STORAGE Capacitors may be stored within the operating temperature range of the capacitor. Lower storage temperature is preferred as it extends the shelf life of the capacitor. Product over one year and within two years of the date code, we recommend recharging the product at the beginning of use for at least 24 hours. EMERGENCY APPLICATIONS If Housing is Leaking: * Skin Contact: Use soap and water thoroughly to wash the area of the skin * Eye Contact: Flush with flowing water or saline, and immediately seek medical treatment * Ingestion: Immediately wash with water and seek medical treatment TRANSPORTATION Not subjected to US DOT or IATA regulations UN3499, <10Wh, Non-Hazardous Goods International shipping description - "Electronic Products - Capacitor" Optimum storage conditions are as follows: * * * * 25C and RH 60% without voltage applied Not in direct sunlight Not in direct contact with water, salt oil or other chemicals Not in direct contact with corrosive materials, acids, alkalis, or toxic gases * Not in dusty environments * Not in environments with shock and vibration conditions Licensed by CAP-XX 8 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 091020