HMC475ST89 / 475ST89E v02.0710 8 Typical Applications Features The HMC475ST89 / HMC475ST89E is an ideal RF/IF gain block & LO or PA driver: P1dB Output Power: +22 dBm * Cellular / PCS / 3G Gain: 21.5 dB Output IP3: +35 dBm * Fixed Wireless & WLAN Cascadable 50 Ohm I/Os * CATV, Cable Modem & DBS Single Supply: +8V to +12V * Microwave Radio & Test Equipment TE Industry Standard SOT89 Package * IF and RF Applications Functional Diagram General Description B SO LE The HMC475ST89(E) is a InGaP Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT amplifier covering DC to 4.5 GHz. Packaged in an industry standard SOT89, the amplifier can be used as a cascadable 50 Ohm RF/IF gain stage as well as a LO or PA driver with up to +25 dBm output power. The HMC475ST89(E) offers 21.5 dB of gain and +35 dBm output IP3 at 850 MHz while requiring only 110 mA from a single positive supply. The Darlington topology results in reduced sensitivity to normal process variations and excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifi cations, Vs= 8.0 V, Rbias= 9.1 Ohm, TA = +25 C Parameter Gain O AMPLIFIERS - DRIVER & GAIN BLOCK - SMT InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4.5 GHz Gain Variation Over Temperature Input Return Loss Output Return Loss Reverse Isolation Output Power for 1 dB Compression (P1dB) Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Noise Figure Supply Current (Icq) DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 4.5 GHz DC - 4.5 GHz DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 4.5 GHz DC - 1.0 GHz 1.0 - 4.5 GHz DC - 4.5 GHz DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 4.5 GHz DC - 2.5 GHz 2.5 - 4.5 GHz DC - 3.0 GHz 3.0 - 4.5 GHz Min. 19.5 17.5 14.5 11.5 9 19.0 18.0 17.5 13.0 11.0 Typ. 21.5 19.5 16.5 13.5 12 0.008 11 14 14 13 10 25 22.0 21.0 19.5 16.0 14.0 35 30 3.5 3.8 110 Max. 0.012 135 Units dB dB dB dB dB dB/ C dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dB dB mA Note: Data taken with broadband bias tee on device output. 8 - 74 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC475ST89 / 475ST89E v02.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4.5 GHz 1 2 3 4 5 6 0 FREQUENCY (GHz) 1 3 4 5 LE Output Return Loss vs. Temperature 0 0 -5 +25C +85C -40C -15 -20 -25 -35 0 1 2 3 4 -10 -15 -20 -25 0 5 1 O Reverse Isolation vs. Temperature 2 3 4 5 4 5 FREQUENCY (GHz) FREQUENCY (GHz) Noise Figure vs. Temperature 10 0 +25C +85C -40C 8 +25C +85C -40C NOISE FIGURE (dB) -10 +25C +85C -40C -5 B SO -10 -30 REVERSE ISOLATION (dB) 2 FREQUENCY (GHz) Input Return Loss vs. Temperature RETURN LOSS (dB) +25C +85C -40C TE 0 GAIN (dB) S21 S11 S22 8 26 24 22 20 18 16 14 12 10 8 6 4 2 0 -20 -30 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 Gain vs. Temperature RETURN LOSS (dB) RESPONSE (dB) Broadband Gain & Return Loss 6 4 2 0 -40 0 1 2 3 FREQUENCY (GHz) 4 5 0 1 2 3 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 75 HMC475ST89 / 475ST89E v02.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4.5 GHz P1dB vs. Temperature 24 24 20 20 Psat (dBm) 16 12 +25C +85C -40C 16 +25C +85C -40C 12 TE P1dB (dBm) 28 8 8 4 4 0 0 0 1 2 3 4 5 0 B SO 35 +25C +85C -40C 15 0 1 2 3 4 5 GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 40 20 3 4 5 Gain, Power & OIP3 vs. Supply Voltage for Constant Icc= 110 mA @ 850 MHz 45 25 2 FREQUENCY (GHz) Output IP3 vs. Temperature 30 1 LE FREQUENCY (GHz) IP3 (dBm) 42 36 30 24 18 12 Gain P1dB Psat IP3 6 0 8 9 10 11 12 Vs (Vdc) FREQUENCY (GHz) Vcc vs. Icc Over Temperature for Fixed Vs= 8V, RBIAS= 9.1 Ohms Icc (mA) O AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Psat vs. Temperature 28 140 135 130 125 120 115 110 105 100 95 90 85 80 75 6.9 +85C +25C -40C 7 7.1 7.2 7.3 7.4 7.5 Vcc (Vdc) 8 - 76 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC475ST89 / 475ST89E v02.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4.5 GHz Absolute Maximum Ratings +8.0 Vdc RF Input Power (RFIN)(Vcc = +7.2 Vdc) +17 dBm Junction Temperature 150 C Continuous Pdiss (T = 85 C) (derate 16.86 mW/C above 85 C) 1.09 W Thermal Resistance (junction to lead) 59.3 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C TE B SO LE Outline Drawing ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-180S OR EQUIVALENT. 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING. 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. O 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Collector Bias Voltage (Vcc) Package Information Part Number Package Body Material Lead Finish MSL Rating HMC475ST89 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC475ST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H475 XXXX [2] H475 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 77 HMC475ST89 / 475ST89E v02.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4.5 GHz Pin Descriptions Function Description Interface Schematic 1 IN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 OUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins and package bottom must be connected to RF/ DC ground. LE TE Pin Number B SO Application Circuit O AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Recommended Bias Resistor Values for Icc= 110 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) 8V 9V 10V 12V RBIAS VALUE 9.1 18 27 43 RBIAS POWER RATING 1/4W 1/2W 1/2W 1W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 8 - 78 50 900 1900 2200 2400 3500 4500 L1 270 nH 56 nH 18 nH 18 nH 15 nH 8.2 nH 6.8 nH C1, C2 0.01 F 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC475ST89 / 475ST89E v02.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4.5 GHz Evaluation PCB O List of Materials for Evaluation PCB 116092 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pin C1, C2 Capacitor, 0402 Pkg. C3 100 pF Capacitor, 0402 Pkg. C4 1000 pF Capacitor, 0603 Pkg. C5 2.2 F Capacitor, Tantalum R1 Resistor, 1206 Pkg. L1 Inductor, 0603 Pkg. U1 HMC475ST89 / HMC475ST89E PCB [2] 107368 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - DRIVER & GAIN BLOCK - SMT B SO LE TE 8 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use,orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 79