E094_098.fm 94 LASER LASER DIODE New product Under development LASER DIODES Wavelength (nm) Model No. (Tc = 25C) Optical power output (mW) MAX. CW Pulse GH06507B2A GH06507B2B GH06507S2A GH16507S2A 650 band GH16507A2A GH16507A2AU GH06510B2A GH06510B2B LT051PS 635 band GH06535B2B LT052MS 650 band LT052PS GH06550B2B GH20707A2A GH20707A2B GH20707S2A 780/650 band GH20707S2B 7 - 10 - 30 50 35 50 50 70 7/7 -/- Features Single mode, operating temperature: 80C MAX. Single mode, single power supply, operating temperature: 80C MAX. Single mode, self-oscillation type, operating temperature: 70C MAX. Resin stem (frame type), self-oscillation type, operating temperature: 70C MAX. Resin stem (frame type), operating temperature: 70C MAX. Resin stem (frame type), operating temperature: 40C MAX. Single mode, operating temperature: 70C MAX. Single mode, single power supply, operating temperature: 70C MAX. Single mode, single power supply, operating temperature: 50C MAX. Single mode, single power supply, operating temperature: 70C MAX. Single mode, operating temperature: 70C MAX. Single mode, single power supply, operating temperature: 70C MAX. Single mode, single power supply, operating temperature: 70C MAX. Dual wavelength type (red and infrared lasers in a single package) operating temperature: 70C MAX. Dual wavelength type (red and infrared lasers in a single package) self-oscillation type, operating temperature: 70C MAX. Dual wavelength type (red and high power infrared lasers in a single package), GH20795A6C 95/7 135/- D-cut package Resin stem (frame type), operating temperature: 70C MAX. GH17805B2AS GH17805B2BS 780 band Resin stem (frame type), operating temperature: 70C MAX. 5 - GH17805D2AS Resin stem (frame type), Low current supply, operating temperature: 70C MAX. GH07885C2C 85 120 High power, operating temperature: 70C MAX. (pulse drive) GH07885D2C 85 120 High power (narrow radiation angle), GH07885E2C 85 120 operating temperature: 70C MAX. (pulse drive), Low current supply GH07895A2C 95 135 High power (narrow radiation angle), operating temperature: 70C MAX. (pulse drive) 780 band High power (narrow radiation angle), D-cut package, GH07895A6C 95 135 operating temperature: 70C MAX. (pulse drive) GH0781HA2C 110 160 High power (narrow radiation angle), GH0781JA2C*1 (120) (180) operating temperature: 70C MAX. (pulse drive) Applications DVD, DVD-ROM Bar code scanner DVD, DVD-ROM DVD, DVD-ROM DVD-R/RW/RAM DVD-R/RW/RAM DVD-RAM DVD-R/RW/RAM (x2 writing) DVD/DVD-ROM Slim combination type (CD-R/RW + DVD-ROM) CD-ROM, CD-Audio CD-R/RW (x12 writing) CD-R/RW (x16 writing) CD-R/RW (x16 writing), for slim drive CD-R/RW (x24 writing) CD-R/RW (x32 writing) Terminal connections A B A A A A A B B B A B B D E D E F A B A C C C C C C C * Numbering System LT0 Package Terminal connection M: Dual power supply P: Single power supply Serial number * Terminal Connections A 1 B 3 Laser diode 1 Photodiode Laser diode 2 94 3 Photodiode 3 Laser diode 2 2 D 4 C 1 3 E 1 4 3 F 1 Photodiode Infrared laser Red laser Photodiode Infrared laser Red laser 2 2 Internet address for Electronic Components Group http://sharp-world.com/ecg/ 1 3 Red laser Infrared laser 2 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E094_098.fm 95 LASER LASER DIODE New product Under development * New Numbering System of Laser Diodes GH 0 65 07 A 2 A Semiconductor laser diode Category (0: Laser diode, 1: Frame type laser diode, 2: Dual wavelength laser) Wavelength (63: 635 nm band, 65: 650 nm band, 78: 780 nm band, etc.) Optical power output (07: 7 mW, etc.) Chip characteristics (A: Standard, B: Low current 1, C: Low current 2, D: Low current 3, S: Self-oscillation type) Package (1: o9, 2: o5.6, 3: 4.8t, 4: 3.6t, 5: 3.0t etc.) Terminal connection (A: Dual power supply, B: Single power supply, C: No monitor, etc.) Supplimental code Model Configurations (Unit: mm) Package Wavelength (nm) TYP. Optical power output (mW) MAX. GH20707A2A/B GH20707S2A/B GH07895A6C GH20795A6C Four lead o5.6 mm Metal stem (D-cut type) o5.6 mm (Resin stem) o5.6 mm (Resin stem) Laser Diode 7 o5.6 mm Metal stem GH06507B2A GH06507B2B GH06507S2A GH16507A2A 650 band GH16507S2A GH16507A2AU 10 635 band 650 band 30 35 50 780 band 780/650 band GH17805B2AS GH17805B2BS GH17805D2AS 5 85 780 band GH06510B2A GH06510B2B LT051PS GH06535B2B LT052MS LT052PS GH06550B2B 95 GH07885C2C GH07885D2C GH07885E2C GH07895A2C GH07895A6C 110 GH0781HA2C* 1 (120) GH0781JA2C*1 7/7 GH20707A2A GH20707A2B GH20707S2A GH20707S2B 95/7 Internet address for Electronic Components Group http://sharp-world.com/ecg/ GH20795A6C Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 95 E094_098.fm 96 LASER HOLOGRAM LASER New product Under development HOLOGRAM LASERS Lineup Package Application Features 3mm resin stem DVD/DVD-ROM GH6D407B5A GH6C005B5A GH6C005B5B General purpose type CD-RW read only GH6CR05D3A GH6CD05B3A x40 read only CD-ROM x40 read only, built-in RF amplifier GH6C605B3A GH6C605B5B GH6C605B3B GH7C605B5A GH7C605B3A GH7C605B5B GH7C605B3B GH5R385C3C GH6R385B5C5 x8 writable, sample-hold system 96 Built-in OPIC type GH5C105D3A GH5C105D3B GH6CD05D3A GH6C605B5A x12 writable MD GH6C005B3A GH6C005B3B Low voltage (3V) operating Low voltage (3V) operating, low current supply CD-R/RW 4.8mm metal stem GH5DA07B3A For DVD car navigation system x10 read only CD-Audio 4.8mm resin stem GH6D305S5A x6 read only, with self-oscillation chip GH5R385C3C5 x16 writable GH5R495A3C x24 writable GH5R41HA3C *1 x16 writable, sample-hold system GH5R41HA3C *1 x32 writable Playback only Recording / playback GH5R413A3C *1 GH6M005A5B GH6M035A5B *1 DPD: Differential Phase Detection Internet address for Electronic Components Group http://sharp-world.com/ecg/ Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E094_098.fm 97 LASER HOLOGRAM LASER New product Under development Laser diodes (Tc = 25C) These specifications were measured without hologram elements and are listed as reference values. GH6D305S5A GH5DA07B3A 650 band GH6D407B5A GH6C005B5A GH6C005B5B GH6C005B3A GH6C005B3B GH5C105D3A GH5C105D3B GH5C105B3A GH6CR05D3A Optical power Pulse optical output* output* (mW) MAX. (mW) MAX. 4.5 6.3 4.3 GH6CD05B3A - - GH6CD05D3A GH6C605B5A GH6C605B5B GH6C605B3A GH6C605B3B GH7C605B5A GH7C605B5B GH5R385C3C GH5R385C3C5 GH6R385B5C5 GH5R495A3C GH5R41HA3C* 10 Threshold current (mA) TYP. (65) Operating current (mA) TYP. 30 40*1 27 36*2 2.2*2 25 36*3 1.85*3 13 18*4 1.8*4 25 36*4 1.75*4 Dual power supply Single power supply Dual power supply Single power supply Dual power supply Single power supply Dual power supply 13 17*5 1.9*5 Dual power supply 25 36*3 1.85*3 Dual power supply 13 19*3 1.9*3 25 36*3 1.85*3 Dual power supply Dual power supply Single power supply Dual power supply Single power supply Dual power supply Single power supply (72)*1 Operating voltage (V) TYP. Beam 2.5*1 1 beam 3 beam 780 band 76 108 30 127*6 2.1*6 85 121 30 120*7 2.2*7 30 130*8 2.2*8 101 144 GH5R413A3C* 10 (117) (162) 32 144*8 2.2*8 GH6M005A5B 4.5 - 20 28*4 1.9*4 GH6M035A5B 31.5 - 15 50*9 1.9*9 GH5RA1HA3C* 10 * Output power from hologram laser *1 PH: 2.85 mW *2 PH: 4.75 mW *6 PH: 85 mW *7 PH: 80 mW Internet address for Electronic Components Group http://sharp-world.com/ecg/ *3 PH: 3.0 mW *8 PH: 100 mW *4 PH: 2.7 mW *9 PH: 27 mW Power supply Dual power supply - Single power supply Applications DVD/DVD-ROM CD-Audio CD-ROM CD-R/RW Laser Diode Model No. Wavelength (nm) MD *5 PH: 2.5 mW Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 97 E094_098.fm 98 LASER HOLOGRAM LASER Light-detectors for signal detection* For CD-ROM Drive (x40) <GH6C605B5A/B> Item (Tc = 25C) Conditions RF output amplitude PH = 3.0 mW* Focus error signal output amplitude With RF amplitude of 0.55 V Radial error signal output amplitude Focus error signal offsetting - OPIC operation voltage OPIC response frequency Rated value TYP. 1.0 V TYP. 0.35 V TYP. 0.12 V MAX. 0.7 m - TYP. 5.0 V Vcc = 5 V, -3 dB MIN. 40 MHz * Optical system is specified separately. PH = Hologram element emission intensity Light-detectors for signal detection* For DVD-ROM Drive (x10) <GH6D407B5A/B> Item (Tc = 25C) Conditions RF output amplitude Rated value PH = 4.75 mW* TYP. 1.05 V Focus error signal output amplitude With RF amplitude of 1.0 V TYP. 0.66 V Focus error signal offsetting With RF amplitude of 1.0 V MAX. 0.5 m OPIC operation voltage OPIC response frequency - TYP. 5.0 V Vcc = 5 V, -3 dB MIN. 60 MHz * Optical system is specified separately. PH = Hologram element emission intensity Light-detectors for signal detection* For CD-R/RW Drive (x24 writable) <GH5R41HA3C> Item Conditions RF output amplitude Outgoing radiation with collimating lens at 1.5 mW at high gain Focus error signal output amplitude Radial error signal output amplitude Focus error signal offsetting OPIC operation voltage OPIC response frequency (Tc = 25C) Rated value TYP. 0.94 V TYP. 0.59 V TYP. 0.19 V MAX. 0.7 m - TYP. 5.0 V Vcc = 5 V, -3 dB MIN. 45 MHz * Optical system is specified separately. Refer to specification sheets for details of each model. * New Numbering System of Hologram Lasers GH 5 C 1 05 D 3 A Semiconductor laser diode Category (5: Hologram laser, 6: Resin stem hologram laser) Application (C: CD/CD-ROM, M: MD, R: CD-R/RW, D: DVD/DVD-ROM, etc.) Response speed (0: Standard, 1: x2 speed, 2: x4 speed, etc.) Optical power output (05: 5 mW, etc.) Chip characteristics (A: Standard, B: Low current 1, C: Low current 2, D: Low current 3, S: Self-oscillation type) Package (1: o9, 2: o5.6, 3: 4.8t, 4: 3.6t, 5: 3.0t, etc.) Terminal connection (A: Dual power supply, B: Single power supply, C: Without monitor) Supplimental code 98 Internet address for Electronic Components Group http://sharp-world.com/ecg/ Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.