SPEC NO: DSAD2302 REV NO: V.13 DATE: MAR/29/2010 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000149
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Min. Typ.
SA10-11GWA Green (GaP) WHITE DIFFUSED 14000 37000 Common Anode, Rt.
Hand Decimal
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 565 nm IF=20mA
λD [1] Dominant Wavelength Green 568 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 30 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage
Per Segment Or (DP) Green 4.4
(2.2)
5.0
(2.5) V IF=20mA
IR Reverse Current
Per Segment Or (DP) Green 10
(10) uA VR=5V
(VR=5V)
Parameter Green Units
Power dissipation
Per Segment Or (DP)
125
(62.5) mW
DC Forward Current
Per Segment Or (DP)
25
(25) mA
Peak Forward Current [1]
Per Segment Or (DP)
140
(140) mA
Reverse Voltage
Per Segment Or (DP)
5
(5) V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds