SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. INTEGRAL THREE WIRE SEAL: Immersion resistant thermoplastic. 3. SEPARATE THREE WIRE SEAL: Immersion resistant thermoplastic. APPLICATION 1. This part is designed to provide an immersion resistant seal on 2 or 3 to 2 or 3 splices made with Raychem D-609 series crimp splices in wires having insulations rated for 125C min. 2. Sealing sleeve shall consist of an insulation sleeve with an integral seal and a separate three wire seal. 3. This part will meet the requirements of MIL-S-81824. 307 Constitution Drive Menlo Park, CA 94025, USA Wire and Harnessing Products Unless otherwise specified dimensions are in millimeters. Inches dimensions are in between brackets. Tyco Electronics reserves the right to ANGLES: N/A TOLERANCES: amend this drawing at any time. Users 0.00 N/A should evaluate the suitability of the ROUGHNESS IN 0.0 N/A product for their application. MICRON 0 N/A TITLE : SEALING SLEEVE, MULTI-WIRE SPLICE WITH SEPARATE THREE WIRE SEAL DOCUMENT NO.: D-436-95 DCR NUMBER: REPLACES: D010336 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 8-May-01 F 0 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None N/A SIZE: A SHEET: 1 of 1