Cree(R) XLamp(R) CMA1840 LED PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS Cree's XLamp(R) HighCurrent LED Array * 14mm optical source Characteristics.............................................2 family is optimized for bestinclass * Optical design consistent with Operating Limits...........................................3 lumen output, efficacy and reliability at CXA1830 and CXB1830 LEDs high drive currents. XLamp CMA LEDs * Cree EasyWhite 2-, 3 and 5-step share the same package design and binning Flux Characteristics, Order Codes & Bins Standard LEDs..............................................4 Flux Characteristics, Order Codes & Bins - LES sizes as Cree's industryleading * Premium Color 2- and 3-step binning Standard LEDs, Premium Color...................5 CXA2 Standard Density LEDs, enabling * Standard & Premium Color LEDs Flux Characteristics, Order Codes and lighting manufacturers to address a available in 70, 80, 90 and 95 CRI Bins - eToneTM LEDs......................................6 range of performance requirements for minimum options Relative Spectral Power Distribution - applications such as track, downlight and outdoor lighting using a single easytouse platform. HighCurrent LED Arrays are now available in two different versions: Standard and eToneTM LEDs. * eTone LEDs available in 90 and 95 CRI minimum options Standard LEDs..............................................7 Relative Spectral Power Distribution - * Forward voltage option: 36V class Standard LEDs, Premium Color...................8 * 85C binning and characterization Relative Spectral Power Distribution - * Maximum drive current: 2300mA eToneTM LEDs............................................. 10 * 115 viewing angle, uniform Electrical Characteristics.......................... 11 chromaticity profile Relative Luminous Flux............................. 12 * Top-side solder connections Typical Spatial Distribution....................... 12 The eTone version delivers beautiful 90 * RoHS and REACh compliant Performance Groups - Chromaticity........ 13 CRI light quality at the same efficacy * UL recognized component Premium Color Performance Groups - as today's standard 80 CRI LEDs. WWW.CREE.COM/XLAMP (R) (R) (E349212) CLD-DS161 REV 4 PRODUCT FAMILY DATA SHEET Chromaticity.............................................. 14 Featuring the same mechanical and Cree EasyWhite(R) Bins Plotted on the optical characteristics as the Standard 1931 CIE Color Space............................... 15 version, the eTone LEDs allow easy Cree Premium Color Bins Plotted on the upgrades from 80 CRI to 90 CRI without 1931 CIE Color Space............................... 16 sacrificing performance. Bin and Order Code Formats.................... 18 Mechanical Dimensions........................... 19 Thermal Design......................................... 20 Notes......................................................... 21 Packaging.................................................. 22 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLAMP (R) CMA1840 LED CHARACTERISTICS Characteristics Viewing angle (FWHM) ESD withstand voltage (JEDEC JS-001-2012) Unit Minimum Typical degrees 115 V Class 3A Maximum DC forward current - Standard mA 2300* DC forward current - eTone mA 1260* Reverse current mA 0.1 Forward voltage (@ 1100mA, 85C) * V 34.7 38.2 Refer to the Operating Limits section. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLAMP (R) CMA1840 LED OPERATING LIMITS The maximum current rating of the CMA1840 depends on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graph shown below assumes that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Either solder pad shown in the Mechanical Dimensions section on page 3 can be used as the Tc measurement point. Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree recommends a maximum LES temperature of 140C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 3 for more information onCMA1840 LES temperature measurement. 2400 85 C, 2300 mA 2200 Standard LEDs 2000 1800 If (mA) 1600 1400 1200 1000 125 C, 885 mA 800 600 400 200 0 0 CMA1840 - eTone 25 50 75 100 125 150 Case Temperature (C) 1300 85 C, 1260 mA 1200 eTone LEDs 1100 1000 900 If (mA) 800 700 600 500 400 300 200 100 0 0 25 50 75 100 125 150 Case Temperature (C) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLAMP (R) CMA1840 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS (IF=1100mA, TJ=85C) The following table provides order codes for XLamp CMA1840 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 18). Nominal CCT Min. Typ Minimum Luminous Flux (lm) 70 73 5686 80 82 70 CRI Typical Luminous Flux (lm) 2-Step Group Order Code 3-Step Group Order Code 5-Step Group Order Code 6114 65E CMA1840-0000000N0B0A65E 5312 5712 65E CMA1840-0000000N0H0A65E 73 5802 6238 57E CMA1840-0000000N0B0A57E 80 82 5420 5828 57E CMA1840-0000000N0H0A57E 90 92 4610 4957 70 73 5634 6058 50E CMA1840-0000000N0B0A50E 80 82 5263 5659 50G CMA1840-0000000N0H0A50G 90 92 4610 4957 50G CMA1840-0000000N0U0A50G 70 73 5591 6012 40E CMA1840-0000000N0B0A40E 80 82 5203 5595 40H CMA1840-0000000N0H0A40H 40G CMA1840-0000000N0H0A40G 90 92 4480 4817 40H CMA1840-0000000N0U0A40H 40G CMA1840-0000000N0U0A40G 80 82 5076 5458 35H CMA1840-0000000N0H0A35H 35G CMA1840-0000000N0H0A35G 90 92 4357 4685 35H CMA1840-0000000N0U0A35H 35G CMA1840-0000000N0U0A35G 70 73 5203 5595 30E CMA1840-0000000N0B0A30E 80 82 4929 5300 30H CMA1840-0000000N0H0A30H 30G CMA1840-0000000N0H0A30G 90 92 4167 4481 30H CMA1840-0000000N0U0A30H 30G CMA1840-0000000N0U0A30G 80 82 4730 5086 27H CMA1840-0000000N0H0A27H 27G CMA1840-0000000N0H0A27G 90 92 3979 4278 27H CMA1840-0000000N0U0A27H 27G CMA1840-0000000N0U0A27G 80 82 4167 4481 22G CMA1840-0000000N0H0A22G 6500 K 5700 K 5000K 4000K 57G 3500K 3000K 2700K 2200K CMA1840-0000000N0U0A57G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 21). * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLAMP (R) CMA1840 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS, PREMIUM COLOR (IF = 1100mA, TJ = 85C) Fidelity CRI 2-Step Min. Typ Minimum Luminous Flux (lm) 4000K 95 98 4013 4315 L5A CMA1840-0000-000N0Z0AL5A 3500K 95 98 3905 4199 35H CMA1840-0000-000N0Z0A35H 3000K 95 98 3652 3926 30H CMA1840-0000-000N0Z0A30H 2700K 95 98 3457 3717 27H CMA1840-0000-000N0Z0A27H Min. Typ Minimum Luminous Flux (lm) Typical Luminous Flux (lm) 90 92 4167 4481 80 82 4929 5300 90 92 4167 4481 95 98 3652 3926 Nominal CCT Typical Luminous Flux (lm) Group Order Code Specialty Nominal CCT 3100K 3000K CRI 2-Step Group L7B L7C Order Code 3-Step Group Order Code 31Q CMA1840-0000000N0U0A31Q 30Q CMA1840-0000000N0U0A30Q Group Order Code 30U CMA1840-0000000N0U0A30U CMA1840-0000000N0H0AL7B CMA1840-0000000N0Z0AL7C Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 21). * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLAMP (R) CMA1840 LED FLUX CHARACTERISTICS, ORDER CODES AND BINS - ETONETM LEDS (IF = 1100mA, TJ = 85C) Nominal CCT 4000K 3500K 3000K 2700K CRI 2-Step 3-Step Min. Typ Minimum Luminous Flux (lm) Typical Luminous Flux (lm) Group Order Code Group Order Code 90 92 4787 5147 40H CMA1840-0000-00PN0U0A40H 95 98 4256 4576 L5A CMA1840-0000-00PN0Z0AL5A 40G CMA1840-0000-00PN0U0A40G 90 92 4721 5076 35H CMA1840-0000-00PN0U0A35H 35G CMA1840-0000-00PN0U0A35G 95 98 4226 4544 35H CMA1840-0000-00PN0Z0A35H 90 92 4683 5035 30H CMA1840-0000-00PN0U0A30H 30G CMA1840-0000-00PN0U0A30G 95 98 4014 4340 30H CMA1840-0000-00PN0Z0A30H 90 92 4493 4831 27H CMA1840-0000-00PN0U0A27H 95 98 3796 4104 27H CMA1840-0000-00PN0Z0A27H 27G CMA1840-0000-00PN0U0A27G Min. Typ Minimum Luminous Flux (lm) Typical Luminous Flux (lm) 90 92 4633 90 92 95 98 Specialty Nominal CCT 3100K CRI 2-Step Group Group Order Code 4982 31Q CMA1840-000000PN0U0A31Q 4683 5035 30Q CMA1840-000000PN0U0A30Q 3885 4200 3000K L7C Order Code 3-Step Group Order Code 30U CMA1840-000000PN0U0A30U CMA1840-000000PN0Z0AL7C Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 21). * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLAMP (R) CMA1840 LED Relative Spectral Power Distribution RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS EZW 70 CRI The following graphs are the result of a series of pulsed measurements at 1100mA and TJ = 85C. 100% Relative Spectral Power 90% 80% 70% 6500 K, 70 CRI 5700 K, 70 CRI 5000 K, 70 CRI 4000 K, 70 CRI 3000 K, 70 CRI 60% 50% 40% 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) EZW 80 CRI 100% Relative Spectral Power 90% 80% 6500 K, 80 CRI 70% 5700 K, 80 CRI 5000 K, 80 CRI 60% 4000 K, 80 CRI 50% 3500 K, 80 CRI 40% 3000 K, 80 CRI 30% 2700 K, 80 CRI 20% 2200 K, 80 CRI 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLAMP (R) CMA1840 LED EZW 90 CRI RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS (CONTINUED) 100% Relative Spectral Power 90% 80% 5700 K, 90 CRI 70% 5000 K, 90 CRI 60% 4000 K, 90 CRI 50% 3500 K, 90 CRI 40% 3000 K, 90 CRI 30% 2700 K, 90 CRI 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS, PREMIUM COLOR The following graphs are the result of a series of pulsed measurements at 1100mA and TJ = 85C. Fidelity Fidelity 100% Relative Spectral Power 90% 80% 70% 4000 K, Z CRI 60% 3500 K, Z CRI 50% 3000 K, Z CRI 40% 2700 K, Z CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLAMP (R) CMA1840 LED RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS, PREMIUM COLOR (CONTINUED) Speciality Specialty 100% Relative Spectral Power 90% 80% 70% 60% 31Q, 3100 K, 90 CRI 50% 40% 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Speciality 100% Relative Spectral Power 90% 80% 70% 30Q, 3000 K, 90 CRI 60% 30U, 3000 K, 90 CRI 50% L7B, 3000 K, 80 CRI 40% L7C, 3000 K, Z CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLAMP (R) CMA1840 LED RELATIVE SPECTRAL POWER DISTRIBUTION - ETONETM LEDS eTone The following graphs are the result of a series of pulsed measurements at 1100mA and TJ = 85C. 100% Relative Spectral Power 90% 80% 70% 4000 K, 90 CRI 60% 3500 K,90 CRI 50% 3000 K, 90 CRI 40% 2700 K, 90 CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) eTone 100% Relative Spectral Power 90% 80% 70% 4000 K, Z CRI 60% 3500 K, Z CRI 50% 3000 K, Z CRI 40% 2700 K, Z CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLAMP (R) CMA1840 LED ELECTRICAL CHARACTERISTICS The following graph is the result of a series of steady-state measurements. 39 38 Voltage (V) 37 36 Tc = 25 C Tc = 55 C 35 Tc = 85 C 34 Tc = 105 C 33 32 31 300 500 700 900 1100 1300 1500 1700 1900 2100 2300 Current (mA) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLAMP (R) CMA1840 LED RELATIVE LUMINOUS FLUX The relative luminous flux values provided below are the ratio of measurements of the CMA1840 LED at steady-state operation at the given conditions, divided by the flux measured during binning, which is a pulsed measurement at 1100mA at TJ = 85C. For example, at steady-state operation of Tc = 55C, IF = 1300mA, the relative luminous flux ratio is 120% in the chart below. A CMA1840 LED that measures 5300lm during binning will deliver 6360lm (5300 * 1.2) at steady-state operation of Tc = 55C, IF = 1300mA. 200% 180% Relative Luminous Flux 160% 140% Tc = 25 C 120% Tc = 55 C 100% Tc = 85 C 80% Tc = 105 C 60% 40% 20% 0% 300 500 700 900 1100 1300 1500 1700 1900 2100 2300 Current (mA) Far Field TYPICAL SPATIAL DISTRIBUTION 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLAMP (R) CMA1840 LED PERFORMANCE GROUPS - CHROMATICITY (TJ = 85C) XLamp CMA1840 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures - 2-Step Code 40H 35H 30H 27H CCT 4000K 3500K 3000K 2700K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 EasyWhite Color Temperatures - 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle () 5700K 0.3287 0.3417 0.00738 0.00360 72.0 5000K 0.3447 0.3553 0.00840 0.00312 65.0 40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5 22G 2200K 0.5066 0.4158 0.00980 0.00480 45.5 Major Axis Minor Axis Bin Code CCT 57G 50G Center Point EasyWhite Color Temperatures - 5-Step Ellipse Center Point x y a b Rotation Angle () 6500K 0.3123 0.3282 0.01110 0.00550 61.0 5700K 0.3287 0.3417 0.01230 0.00600 72.0 50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0 40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7 30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2 Bin Code CCT 65E 57E Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLAMP (R) CMA1840 LED PREMIUM COLOR PERFORMANCE GROUPS - CHROMATICITY (TJ = 85C) XLamp CMA1840 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. Fidelity EasyWhite Color Temperatures - 2-Step Code L5A 35H 30H 27H CCT 4000K 3500K 3000K 2700K x y 0.3764 0.3711 0.3784 0.3787 0.3847 0.3826 0.3825 0.3748 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 Specialty EasyWhite Color Temperatures - 2-Step Code L7B L7C CCT 3000K 3000K x y 0.4263 0.3848 0.4296 0.3916 0.4361 0.3938 0.4326 0.3868 0.4192 0.3754 0.4224 0.3823 0.4291 0.3847 0.4257 0.3777 EasyWhite Color Temperatures - 3-Step Ellipse Center Point Major Axis Minor Axis x y a b Rotation Angle () 3100K 0.4236 0.3888 0.00848 0.00455 50.3 30Q 3000K 0.4305 0.3935 0.00834 0.00408 53.2 30U 3000K 0.4274 0.3837 0.00834 0.00408 53.2 Bin Code CCT 31Q Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLAMP (R) CMA1840 LED CREE EASYWHITE(R) BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85C) 0.45 ANSI C78.377 Quadrangle 0.44 EasyWhite 5-step 0.43 EasyWhite 3-step 0.42 EasyWhite 2-step 2700 K 2200 K 2450 K 3000 K 3500 K 0.41 4000 K 0.40 CCy 0.39 5000 K 4500 K 5700 K 0.38 0.37 6500 K 0.36 0.35 7000K 0.34 0.33 0.32 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.31 CCx Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLAMP (R) CMA1840 LED CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85C) Fidelity (2-step) 0.44 2700K ANSI C78.377 Quadrangle 0.43 3000K 0.42 3500K 0.41 27H 4000K CCy 0.40 30H 4500K 35H 0.39 0.38 L5A 0.37 0.36 0.35 0.48 0.47 0.46 0.45 0.44 CCx 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLAMP (R) CMA1840 LED CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85C) - CONTINUED Speciality (2-step) 0.44 ANSI C78.377 Quadrangle 3000 K 0.43 0.42 3500 K CCy 0.41 0.40 0.39 L7B L7C 0.38 0.46 0.45 CCx 0.44 0.43 0.42 0.41 0.37 Speciality (3-step) 0.44 ANSI C78.377 Quadrangle 3000K 0.43 0.42 3500K CCy 0.41 0.40 30Q 0.39 31Q 30U 0.38 0.46 0.45 CCx 0.44 0.43 0.42 0.41 0.37 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLAMP (R) CMA1840 LED BIN AND ORDER CODE FORMATS Bin codes and order codes are configured as follows: Order Code Bin Code Series = CMA18 Series = CMA18 Internal code Chromaticity bin Vf class N0 = 36-V class Version 0 = Standard P = eTone CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Z = 95 CRI minimum SSSSSCC-HHHH-HHEGGRNNNNN Kit code Vf class N0 = 36-V class Performance class Version 0 = Standard P = eTone SSSSSCC-WWW-FF-GGR-EAAAA Internal code CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Z = 95 CRI minimum Flux bin 0A = Not binned into flux bins Performance class Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLAMP (R) CMA1840 LED MECHANICAL DIMENSIONS Dimensions are in mm. Tolerances unless otherwise specified: +.13 x +1 Meaning of LED marking M1840N = 36V CMA1840 M1840Ne = 36V CMA1840 eTone X1 X2 X3 X4 X5 X1 CCT 1 = 6500K ... 8 = 2700K X2 M = EasyWhite or Fidelity LED on the blackbody line Q = Specialty LED below the blackbody line U = Specialty LED below the blackbody line X3 X4 Flux bin 0A = Not binned into flux bins X5 CRI B = 70 CRI min H = 80 CRI min U = 90 CRI min Z = 95 CRI min Tc measurement point: either the anode or cathode solder pad Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 XLAMP (R) CMA1840 LED THERMAL DESIGN The CMA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure that the CMA LED is being operated within its designed limits. LES temperature measurement provides additional verification of good thermal design. Please refer to page 3 for the Operating Limit specification. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from solder point (TSP) to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CMA soldering recommendations and information on thermal interface materials (TIM), LES temperature measurement, and connection methods, please refer to the Cree XLamp CM Family LEDs soldering and handling document. To keep the CMA1840 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following graph, depending on the operating environment. The yaxis in the graph is a base 10 logarithmic scale. R_j-c R_j-c Tc Tc R_tim As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim) R_c-a plus the thermal resistance of the heat sink (R_hs). R_hs CMA1840 - Standard Ta Ta 100.00 Maximum R_c-a 10.00 Ta = 25 C Ta = 55 C 1.00 Ta = 85 C Ta = 105 C 0.10 0.01 300 500 700 900 1100 1300 1500 1700 1900 2100 2300 Current (mA) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLAMP (R) CMA1840 LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Cree did not perform Room Temperature Operating Life (RTOL) testing on the CMA1840 LED. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLAMP (R) CMA1840 LED PACKAGING Cree CMA1840 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. Dimensions are in inches. Tolerances: +.13 x +1 5 4 6 3 7.125 5 2 R.375 4 1 3 2 1 NOTICE FIDENTIAL. THIS PLOT AND THE INFORMATION NSENT D WITHIN ARE THE PROPRIETARY AND TIAL INFORMATION OF CREE, INC. THIS PLOT E COPIED, REPRODUCED OR DISCLOSED TO ANY IZED PERSON WITHOUTTHE WRITTEN CONSENT C. 5.875 1.125 R .375 5.875 R.375 7.625 .875 .875 5.875 LABEL WITH CREE BIN CODE, QUANTITY, LOT # PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON LABEL WITH CREE BIN CODE, QTY, LOT# ITH CREE BIN ANTITY, LOT # .875 1.063 BAG .38 .875 BAG .38 PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON EL IS LOCATED IDE OF COVER LABEL WITH CREE BIN CODE, QTY, LOT# LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: LABEL WITH CREE BIN CODE, QTY, LOT# .X .XX .XXX X THIRD ANGLE PROJECTION L WITH CREE BIN QUANTITY, LOT # 6 5 4 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. THIRD ANGLE PROJECTION 0.1 .05 .005 1 .X .XX .XXX X 0.1 .05 .005 1 FOR SHEET METAL PARTS ONLY .X .06 DATE DATE APPROVED DATE 4600 Silicon Dri Durham, N.C 27 Phone (919) 361 Fax (919) 313-5 TITLE CXA15XX_DATASHEET MATERIAL FOR SHEET METAL PARTS ONLY .X DRAWN .06BY .03 UNLESS OTHERWISE SPECIFIED .XX .XXX .010 DIMENSIONS ARE IN X CHECK 2 MILLIMETERS & BEFORE FINISH. (R) withoutTOLERANCE notice.3Cree the Cree UNLESS, SPECIFIED: DRAWN BY CHECK SIZE FINALDATE PROTECTIVE FINISH SCALE DATE C DRAWING NO. CXA15XX_DATASHEET_BAG2013 0.500 2 logo, XLamp and EasyWhite are registered trademarks and (R) APPROVED (R) 4600 Silicon Drive SHEET OF Durham, N.C 27703 Phone (919) 361-4770 1 Fax (919) 313-5303 DATE TITLE CXA15XX_DATASHEET 22 MATERIAL SIZE FINAL PROTECTIVE FINISH DRAWING NO. CXA15XX_DATASHEET_BAG2013