www.hubbell-wiring.com
Count Down Timers
FEATURES
Pre-set 5 button selection
Manual override to off
LEDs count down as time intervals reduce
“Alert to off” function - Red LED will flash during
the final 30 seconds and emit audible warning
Permanent time markings
Timers are used in many commercial, industrial and residential
designs as a method to control energy. As an alternative to
sensors or building controls, individual switch timers target
point-of-use to enable the user to take control of the space
and load, within limits. Preset timers are a simple on/off
option to consider. By selecting a timer, the maximum on-time
is established and control is maintained based on a pre-
established regimen, adding to the building’s efficiency and
energy savings. Timers in increments up to 30 and 60 minutes
are excellent for use in indoor spaces. The 12 hour version is
popular with outdoor lighting control and HVAC where more
on-time is required.
SPECIFICATIONS
Rating:
120V AC - 8.3A, Resistive or Inductive
(1000W Incandescent), 1/6 hp
277V AC - 5.1A, Inductive (1400W Fluorescent)
3 Timer increments: 30 minute, 60 minute, 12 hour
Operating temperature, 32° F to 122° F
(0° C to 50° C)
Terminates with 6 inch wire leads
Ashrae, LEED and Cal Tittle 24 eligible
cULus listed to UL60730-1 and UL60730-2
Save Energy with
Timer Controls
HUBBELL WIRING DEVICE-KELLEMS TIMERS
Digital accuracy
Simple “one button” selection
Matches Hubbell Energy
Control sensors