EDR-75 75W Single Output Industrial DIN RAIL series Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 File Name:EDR-75-SPEC 2018-05-28 EDR-75 75W Single Output Industrial DIN RAIL series SPECIFICATION MODEL EDR-75-12 EDR-75-24 EDR-75-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 6.3A 3.2A 1.6A CURRENT RANGE 0 ~ 6.3A 0 ~ 3.2A 0 ~ 1.6A RATED POWER OUTPUT 75.6W RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 12 ~ 14V 76.8W 76.8W 120mVp-p 150mVp-p 24 ~ 28V 48 ~ 55V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% SETUP, RISE TIME 1200ms, 60ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE 60ms/230VAC Note.6 FREQUENCY RANGE INPUT EFFICIENCY (Typ.) 85.5% 1.45A/115VAC LEAKAGE CURRENT <1mA / 240VAC OVER VOLTAGE 20A/115VAC 87.5% 88.5% 0.9A/230VAC 35A/230VAC 105 ~ 130% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 29 ~ 33V 14 ~ 17V 56 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover WORKING TEMP. -20 ~ +60 (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 95% RH non-condensing -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 SAFETY STANDARDS UL508, TUV EN60950-1, EAC TP TC 004, BSMI CNS14336-1 approved;(meet EN60204-1) SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note 4) EMC EMISSION EMC IMMUNITY NOTE [DC input operation possible by connecting AC/L(+), AC/N(-)] OVER TEMPERATURE ENVIRONMENT STORAGE TEMP., HUMIDITY OTHERS 12ms/115VAC at full load 127 ~ 370VDC 47 ~ 63Hz AC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD PROTECTION 90 ~ 264VAC 2000ms, 60ms/115VAC at full load I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55032 (CISPR32) Class A, EN61000-3-2,-3, EAC TP TC 020, CNS13438 Class A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A, EAC TP TC 020 MTBF 506.6K hrs min. DIMENSION 32*125.2*102mm (W*H*D) PACKING 0.51Kg; 28pcs/15.3Kg/1.22CUFT MIL-HDBK-217F (25) File Name:EDR-75-SPEC 2018-05-28 EDR-75 75W Single Output Industrial DIN RAIL series Block Diagram fosc : 85KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING +V -V O.C.P. O.L.P. FG DETECTION CIRCUIT PWM CONTROL O.T.P. O.V.P. Derating Curve Static Characteristics 230VAC 100 100 24V,48V(230VAC) 90 80 80 12V(230VAC) 115VAC 70 12V,24V,48V(115VAC) 50 LOAD (%) LOAD (%) 60 40 20 -20 -10 0 10 20 30 40 45 50 AMBIENT TEMPERATURE () 60 70 (VERTICAL) 60 50 40 90 100 125 135 145 155 165 175 180 200 230 264 INPUT VOLTAGE (V) 60Hz File Name:EDR-75-SPEC 2018-05-28 EDR-75 75W Single Output Industrial DIN RAIL series Mechanical Specification Case No.221B Unit:mm Top View 102 32 39 1234 TB2 (12V,24V only) 125.2 (48V only) DC OK +V ADJ. TB1 123 Side View Front View Side View Terminal Pin No. Assignment (TB1) Pin No. 1 2 3 Assignment FG AC/N or DC AC/L or DC + Terminal Pin No. Assignment (TB2) Pin No. 1,2 3,4 Assignment DC OUTPUT -V DC OUTPUT+V Bottom View Installation Instruction 35 This series fits DIN rail TS35/7.5 or TS35/15. For installation details, please refer to the Instruction manual. ADMISSIBLE DIN rail:TS35/7.5 OR TS35/15 (For reference only. Not included with unit.) Back View Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:EDR-75-SPEC 2018-05-28