The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Mar 31, 2012
1
Product data sheet
Characteristics
XACB04
empty pendant control station XAC-B - 4
vertical openings
Main
Range of product Harmony XAC
Product or component
type
Pendant control station
Control station name XACB
Control station type Double insulated
Enclosure material Glass reinforced polyester
Electrical circuit type Control circuit
Power circuit
Enclosure type Empty enclosure
Number of cut-out 4 cut-outs
Cable entry Rubber sleeve with stepped entry, cable outer diam-
eter: 10...22 mm
Guard rail Without
Cutout in base of enclo-
sure
Without
Complementary
Control station colour Yellow
Vertical operator cut-out centre 40 mm
Mechanical durability 1000000 cycles
Product weight 1 kg
Environment
Standards CSA C22-2 No 14
EN/IEC 60947-5-1
UL 508
Product certifications CSA type 4
Protective treatment TH
Ambient air temperature for operation -25...70 °C
Ambient air temperature for storage -40...70 °C
Vibration resistance 15 gn (f = 10...500 Hz) conforming to IEC 60068-2-6
Shock resistance 100 gn conforming to IEC 60068-2-27
Class of protection against electric shock Class II conforming to IEC 61140
IP degree of protection IP65 conforming to IEC 60529
IK degree of protection IK08 conforming to EN 50102
Downloaded from Elcodis.com electronic components distributor
2
Product data sheet
Dimensions Drawings
XACB04
Dimensions
Below drawing shows a product with 6 cut-outs. Select the number of cut-outs according to the product characteristics in order to get b, b1
and c dimensions.
(1) With mushroom head operator
Dimensions in mm
Number of cut-outs 2 4 6 8 12
b 409 499 589 679 679
b1 220 310 400 490 490
c 98 98 98 98 98
d 40 40 40 40 30
Dimensions in in.
Number of cut-outs 2 4 6 8 12
b 16.10 19.64 23.19 26.73 26.73
b1 8.66 12.20 15.75 19.29 19.29
c 3.86 3.86 3.86 3.86 3.86
d 1.57 1.57 1.57 1.57 1.18
Protective cable sleeves
(1) Internal ø
Downloaded from Elcodis.com electronic components distributor
3
Product data sheet
Connections and Schema
XACB04
Control of Single-Speed Reversing Motor
With XESD1181 contact block, to be ordered separately
Control of 2-Speed Reversing Motor
With XESD1281 contact block, to be ordered separately
KM High speed contactor
Control of Single-Speed Reversing Motor 2-Phase Switching
Downloaded from Elcodis.com electronic components distributor
4
With XESD1191 contact block, to be ordered separately
Combined with 3-pole isolating block XACS399 or XACS3991, shown in the unoperated position (pendant station “supplied”), fitted with key
release trigger action latching Emergency stop operator.
Control of 2-Speed Reversing Motor 2-Phase Switching
With XESD1291 contact block, to be ordered separately
Control of Single-Speed Reversing Motor 3-Phase switching, Reversing by 2-Phase Inversion
Downloaded from Elcodis.com electronic components distributor
