7 6 5 4 | 3 | 2 4 [C] SEE NOTE I.| PIN 59 PIN | SEE DETAIL B Al LABEL SEE DETAIL A / / AL(MAX.) | | 7 7 PIN 9 IL65(MAX.) |= 7 ; PIN I7 > Fy SS DETAIL B [| 2 ELH PIN 46 3.85 * 0.6 az | A} O00 = TSSHAX) PIN I6 PIN 57! "x59 = 0.024 a . 15.40(MAX,) 59.9 (MAX.) PIN 24 0.6 KMAX.) 3.36 (MAX) r- 20(Ref) 3.65 + 0.6. ae PIN 8 PIN I6 _ (5.5(MAX.) DMS-59(MALE) as 206s _ | DVI 2 OB IMAXS LENGTH DETAIL A MOLEX P/N: 887-6855-XX REV.B DETAIL B m= DVI_D(MALE) CKT I4 DETAIL B BACK SIDE BACK SIDE S = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 5 == SYMBOLS| (UNLESS SPECIFIED) MM/IN TT METRIC Cl aRGECTION - In = Ss mm INCH DRAWN BY DATE TITLE ORS |z\W-o [cPrAcesie--- _e--- _YLu13 2007/44/07 DMS59(M) TO TWO DVI-D(M) oo Br 3 PLACES|+--- _|--- __|CRECKED BY DATE CABLE ASSY ne &\\/-O [2 PLACES|#=-= [=== BLAU 2007/11/07 Oo & = ~a|4 1 PLACE [4--- --== APPROVED BY DATE rosuss ANGULAR === BLAU 2007/11/07 ffolex MOLEX INCORPORATED Lu S 3 5 we MATERIAL NO. DOCUMENT NO. SHEET NO. oO ZEt DRAFT WHERE APPLICABLE] SEE TABLE A | SD-88744-099 1 OF 3 Hb =e} WTC? bios SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C1 A 4\INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A4_P_ME_ Rev. D 2004/04/02 T | 3 2 1tb_frame_A4_P_ME_T Rev. D 2004/04/02 WIRING DIAGRAM: DVI 1 DMS59 _ | CABLE FUNCTION 2007/11/0 2007/1111 W-0 PACES F--- 3 PLACES|+ ~~~ \/-0 [2 PLACES|+- 1 PLACE [+ === ER DESCRIPTION C NO: DG2008-0035 WNJLIU13 DRAFT WHER MUS T REMAIN WITHIN DIMENSIONS DVI 2 DMS59 | CABLE FUNCTION QUALITY] GENERAL TOLERANCES SYMBOLS] (UNLESS SPECIFIED) MM/IN +--- LIU13 2007/11/07 +--- LAU 2007/11/07 $-=0 LAU 2007/11/07 THIRD. ANGLE METRIC | Cloroiection DMS59(M) TO TWO DVI-D(M) CABLE ASS'Y MOLEX INCORPORATED PLICABLE| SEE TABLE A | SD-88744-099 2 OF 3 3 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 2 1MATERIAL LIST: NOTEs|. OVERMOLD SPECIFICATION 1 DMS59 BOOT MOLDED WITH SNOW WHITE PVC RESIN,UL 94V-O. 2 DVI BOOT MOLDED WITH SNOW WHITE PVC RESIN,UL 94V-0. 2. MECHANICAL SPECIFICATION W2.1| CABLE SHOULD STAND THE PULL FORCE 89-IIIN FOR 30 SECONDS WITH NO VISIBLE TERMINATION DAMAGE. 2.2 CABLE SHOULD PASS THE FLEX TEST IN 100 CYCLES AT EACH OF PLANES, PER EIA 364-41, CONDITION I. F | LABEL 3. PRODUCT ELECTRICAL SPECIFICATION E |DVI THUMB SCREW (4-40UNC) 4 WW 3.| DIELECTRIC STRENGTH: 300V DC FOR lOmS. D | DVI_D SINGLE CHANNEL G/F CONNECTOR 2 Ws:2 INSULATION RESISTANCE: 20 MEGA Ohms(MIN.). C |LFH SCREW (4-40UNC) 2 V3.3 CONTACT RESISTANCE: 2 Ohms(MAX.). B | DMS-59 PLUG ASSY(NATURE) | V3.4 DIFFERENTIAL LINES CHARACTERISTIC IMPEDANCE: |007 Ohms eTDR. a [DVI-D SINGLE LINK CABLE 2 3.5 SIGNALS CROSSTALK(FEXT) : 5% (MAX.) PER ANSI/EIA-364-90. ITEM DESCRIPTION any. 3.6 SIGNALS INTRA-PAIR SKEW (PER CABLE): <I50 ps, 4.CONNECTOR PLATING: AU FLASH PLATING. 5.SHORTCIRCUIT AMONG DRAIN WIRES IS ACCEPTABLE. 6.SCREW SPEC.:4-40 UNC. TABLE A 88768-5510 | DMS59(M) TO TWO DVI-D(M) S/L CABLE 3M 3000260 88768-5500| DMS59(M) TO TWO DVI-D(M)S/L CABLE 2M | 200050 MX-P/N DESCRIPTION LENGTH S = S QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 5 ===! |sympocs} (UNLESS SPECIFIED) MM/IN --- METRIC Oc PROJECTION Ren ses| mo mm INCH _ | DRAWN BY DATE TITLE aR SSS|Z|W-0 PLACES E---_[z--- WLIU13 2007/11/07 DMS59(M) TO TWO DVI-DiM) Ge fr 3 PLACES|+--- _[+--- _|CHECKED BY DATE CABLE ASS'Y ns BIN/=0 [2 PLACES|]#-_[+-- BLAU 2007/11/07 on zo W 1 PLACE +--- +--- APPROVED BY DATE yous ANGULAR f===* BLAU 9007/44/07 ffolex MOLEX INCORPORATED WS Ss ne MATERIAL NO. DOCUMENT NO. SHEET NO. Zz Be ee & DRAFT WHERE APPLICABLE] SEE TABLE A |SD-88744-099 3 0F 3 LL LL) =e WITHIN? DRAEFSIONS SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C1 A ZIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A4_P_ME_T Rev. D 2004/04/02 6 Ul |REV | , 3 2 17 6 5 4 3 2 1 NOTE:|. OVERMOLD SPECIFICATION .| DMS59 BOOT MOLDED WITH SNOW WHITE PVC RESIN,UL 94V-0. |.2 DVI BOOT MOLDED WITH SNOW WHITE PVC RESIN,UL 94V-0. 2. MECHANICAL SPECIFICATION W2.1 CABLE SHOULD STAND THE PULL FORCE 89-IIIN FOR 30 SECONDS WITH NO VISIBLE TERMINATION DAMAGE. 2.2 CABLE SHOULD PASS THE FLEX TEST IN I00 CYCLES AT EACH MATERIAL LIST: OF PLANES, PER EIA 364-41, CONDITION |. F LABEL | 3. PRODUCT ELECTRICAL SPECIFICATION E DVI THUMB SCREW (4-40UNC) 4 WW 3.| DIELECTRIC STRENGTH: 300V DC FOR l0mS. D | DVLLD SINGLE CHANNEL G/F CONNECTOR 2 73.2 INSULATION RESISTANCE: 20 MEGA Ohms(MIN.). C |LFH SCREW (4-40UNC) 2 W3.3 CONTACT RESISTANCE: 2 Ohms(MAX.). B | DMS-59 PLUG ASSY (NATURE) | W 3.4 DIFFERENTIAL LINES CHARACTERISTIC IMPEDANCE: 10027 Ohms e@TDR. A |DVI-D SINGLE LINK CABLE 3 3.5 SIGNALS CROSSTALK(FEXT) : 5% (MAX.) PER ANSI/EIA-364-90. TEM DESCRIPTION any. 3,6 SIGNALS INTRA-PAIR SKEW (PER CABLE): <I50 ps. 4.CONNECTOR PLATING: AU FLASH PLATING. 5.SHORTCIRCUIT AMONG DRAIN WIRES IS ACCEPTABLE. 6.SCREW SPEC.:4-40 UNC. TABLE A 88768-5510 | DMS59(M) TO TWO DVI-D(M)S/L CABLE 3M | 3000260 88768-5500] DMS59(M) TO TWO DVI-D(M)S/L CABLE 2M | 200050 MX-P/N DESCRIPTION LENGTH a a a QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 5 S55 |sympocs| (UNLESS SPECIFIED) MM/IN --- METRIC ola PROJECTION _ Seseexz mm INCH DRAWN BY DATE TITLE aoe SSS|Z/W-0 PLACES E---[z--- WLIU13 2007/11/07 DMS59(M) TO TWO DVI-DiM) oo F 3 PLACES}# ---|4+--- [CHECKED BY DATE CABLE ASSY M25 |S|\/-0 [2 PLACES[#=-= [+=== BLAU 2007/11/07 =z ON = WW 1 PLACE |4--- +--- APPROVED BY DATE OBS ia poors1107| '8x ~MOLEX INCORPORATED >< oa wd Sa fe MATERIAL NO. DOCUMENT NO. SHEET NO. Zz 5m eh DRAFT WHERE APPLICABLE] SEE TABLE A |SD-88768-099 3 OF 3 HH i) =e} WITHIN? DRAEFSIONS SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX D ie /\ GIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A4_P_ME_T Rev. D 2004/04/02 6 | 3 | 4 3 2 1