Technical Data
Advance Tapes International Limited,PO Box 122,
Abbey Meadows,Leicester, LE4 5RA.
Tel:0116 251 0191.Fax: 0116 265 2046. www.advancetapes.com
General description
A polythene extruded matt cloth tape with a waterproof finish coated with an
aggressive pressure sensitive adhesive.
Ver y strong
Easy tear and unwind
Conformable to awkward shapes
Water resistant finish
Good abrasion resistance
Non-corrosive adhesive
Can be written on
Wide colour range
Specifications
Certification* to the following standards may be available on request.
DEF STAN 81-25 and BS3887 :1991
Technical Details
Typical values
Thickness 0.33mm
Breaking Load 85 N/cm
Elongation 8%
Adhesion
Steel 4.0 N/cm
Self 2.2 N/cm
Moisture Vapour Permeability 35g/m2/24hrs
Water extract
PH 6.5 to 7.5
ChlorideMax. 0.05% as NaCl
SulphateMax. 0.25% as Na2SO4
RoHS compliant Yes
Ser vice Temperature -50°C to +80°C
Application Temperature +10°C to +45°C
Storage Temperature +12°C to +25°C
*Standard charge for certificate:£25.00.
AT160 High Specification
Waterproof Cloth Tape
Issue 12 / May 2006
AFERA
Association des Fabricants Européens de
Rubans Auto-Adhésifs.
NOTE
Except where indicated otherwise,the figures stated are aver-
age values and should not be regarded as MAXIMUMor MINI-
MUM values for specification purposes.The Company reserves
the right to improve products and any change in specification
will result in a re-issue of the relevant ‘Technical Data Sheet’.
Customers should satisfy themselves that the tape is suitable
for their requirements whether after such modifications or
otherwise. Please check that you have the latest issue of the
‘Technical Data Sheet’.All slitting and length tolerances are to
British Standards.Before use the customer is advised to con-
sult the Health & Safety Data Sheet produced by the company
for this product,which is available on request.
STORAGE
Tapes stored below the minimum recommended temperature
will require warming up to that level before use.Up to 24
hours may be required for this to take place.
