Based Mounted Shunts 828 Series Model 828 is a compact shunt of commercial quality and is designed for chassis mounting in electronic equipment. Model 828-92N Specification Accuracy class: 1.0 When calibrated together with an indicator, the overall system accuracy is within the instrument class. Ratings: 100mA to 10A Outputs: Standard output is 75mV 50, 60, 100 or 150mV are available on request Overload withstand: 1.2 x rated current continuously 10 x rated current for 5 seconds at 75mV Installation Shunts can be mounted horizontally or vertically. For maximum heat dissipation, mount horizontally with the element in free air and ensure that the equipment housing permits adequate ventilation. Temperature Coefficient: 0.002% per C overall. Ambient temperature: Calibrated for 20C, they can be used in an ambient range of -20C to +60C Temperature rise: When mounted as recommended in freely circulating air, the temperature rise should not exceed 90C at 75mV. Warning Shunts are uninsulated and protection against accidental contact may be necessary in order to comply with Health & Safety regulations. Dimensions Shunts 6 Web: www.crompton-instruments.com * Email: crompton.info@tycoelectronics.com 2002 Based Mounted Shunts 829 Series Model 829 provides an alternative to the 880 series at ratings below 100A. Its black moulded base gives the additional mechanical strength required for many applications as well as providing a means of mounting. It is equally suitable for laboratory work or for use as a component in electronic equipment. Model 829-92M Specification Accuracy class: 0.5 0.2 available on request When calibrated together with an indicator, the overall system accuracy is within the instrument class. Ratings: 1 to 100 amps Standard output is 75mV 50, 60, 100 or 150mV available on request Construction The manganin resistance element is silver soldered into conservatively rated brass end blocks. These are mounted on to an insulating, moulded base, drilled to provide fixing holes. The current terminals are substantial M8 studs fitted with locknuts and washers. Connection of the potential leads is made by M5 slotted hexagon screws. Overload Withstand: 1.2 x rated current continuously 10 x rated current for 5 seconds at 75mV Ambient Temperature: Calibrated for 20C, they can be used in an ambient range of -20C to +60C. Temperature rise: When mounted as recommended in freely circulating air, the temperature rise should not exceed 90C at 75mV. Installation Shunts can be mounted horizontally or vertically. For maximum heat dissipation, mount horizontally with the element in free air and ensure that the equipment housing permits adequate ventilation. Warning Shunts are uninsulated and protection against accidental contact may be necessary in order to comply with Health & Safety regulations. Dimensions Shunts Web: www.crompton-instruments.com * Email: crompton.info@tycoelectronics.com 2002 Based Mounted Shunts FN Series This base mounted shunt provides an alternative to the panel meter series at ratings below 500A. Its black moulded base gives the additional mechanical strength required for many applications as well as providing a means of mounting. It is equally suitable for laboratory work for use as a component in electronic equipment. Features Accuracy 0.25% Insulated Base mounting Temperature Coefficient 0.002% per 1C. Specification Installation Ratings: 1-500A Accuracy: 0.25% Outputs: 50mV (or) 100mV Refer to Factory for other outputs Temperature Coefficient: Shunts can be mounted horizontally or vertically. For maximum heat dissipitation, mount horizontally with the element in free air and ensure that the equipment housing permits adequate ventilation. 0.002% per C overall Construction Warning The manganin resistance element is hard soldered into conservatively rated brass end blocks. These are mounted on to an insulating, moulded base, drilled to provide fixing holes. Shunts are not fully insulated and protection against accidential contact may be necessary in order to comply with Health and Safety regulations. Dimensions 50 MV 100 MV CATALOG No AMP A B CATALOG No AMP mm in mm in A B mm in mm in FN-1.50* 1 35.05 1.38 12.7 12 FN-1.100 1 35.05 1.38 12.7 12 FN-2.50* 2 35.05 1.38 12.7 12 FN-2.100 2 35.05 1.38 12.7 12 FN-5.50* 5 35.05 1.38 12.7 12 FN-5.100 5 35.05 1.38 12.7 12 FN-10.50* 10 35.05 1.38 12.7 12 FN-10.100 10 35.05 1.38 12.7 12 FN-20.50 20 35.05 1.38 12.7 12 FN-15.100 15 35.05 1.38 12.7 12 FN-50.50 50 35.05 1.38 12.7 12 FN-20.100 20 35.05 1.38 12.7 12 FN-100.50 100 35.05 1.38 12.7 12 FN-25.100 25 35.05 1.38 12.7 12 FN-150.50 150 35.05 1.38 12.7 12 FN-50.100 50 35.05 1.38 12.7 12 FN-200.50 200 35.05 1.38 12.7 12 FN-75.100 75 35.05 1.38 12.7 12 FN-250.50 250 41.40 1.63 19.05 34 FN-100.100 100 35.05 1.38 12.7 12 FN-300.50 300 41.40 1.63 19.05 34 FN-200.100 200 35.05 1.38 12.7 12 FN-400.50 400 41.40 1.63 19.05 34 FN-300.100 300 41.40 1.63 19.07 34 FN-500.50 500 41.40 1.63 19.05 34 FN-500.100 500 41.40 1.63 19.07 34 Tolerances + 0.381 mm (0.015 in) for hole diameters, other tolerances + 0.762 mm (0.030 in) unless otherwise noted. Dimensions are subject to change without notice. Shunts Web: www.crompton-instruments.com * Email: crompton.info@tycoelectronics.com 2002