Gap Pad 2500 (R) Thermally Conductive, Un-Reinforced Gap Filling Material Features and Benefits * Thermal conductivity: 2.7 W/m-K * High thermal performance, cost-effective solution * Un-reinforced construction for additional compliancy * Medium compliancy and conformability TYPICAL PROPERTIES OF GAP PAD 2500 PROPERTY Color IMPERIAL VALUE Light Brown METRIC VALUE Light Brown TEST METHOD Visual Reinforcement Carrier -- -- -- Thickness (inch) / (mm) 0.020 to 0.125 0.508 to 3.175 ASTM D374 Inherent Surface Tack (1 side) 2 2 -- Density (Bulk Rubber) (g/cc) 3.1 3.1 ASTM D792 Heat Capacity (J/g-K) 1.0 1.0 ASTM E1269 Hardness (Bulk Rubber) (Shore 00) (1) 80 80 ASTM D2240 Young's Modulus (psi) / (kPa) (2) 113 779 ASTM D575 Continuous Use Temp (F) / (C) -76 to 392 -60 to 200 -- ELECTRICAL Dielectric Breakdown Voltage (Vac) >6000 >6000 ASTM D149 Dielectric Constant (1000 Hz) 6.8 6.8 ASTM D150 Volume Resistivity (Ohm-meter) 1011 1011 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL Thermal Conductivity (W/m-K) 2.7 2.7 ASTM D5470 THERMAL PERFORMANCE vs. STRAIN Configurations Available: * Sheet form and die-cut parts Building a Part Number 0.100 - 02 - 00 - Standard Options ACME 89302 Rev a Section E - Section A Resultant Thickness (mils) 120 100 80 60 40 20 0 0.20 30 0.61 * Multiple heat-generating components to a common heat sink * Graphics chips to heat sinks * Processors to heat sinks * Mass storage drives * Wireline / wireless communications hardware GP2500 Thickness vs. Thermal Resistance Gap Pad 2500 20 0.62 Typical Applications Include: Section D Note: Resultant thickness is defined as the final gap thickness of the application. 10 0.74 1) Thir ty second delay value Shore 00 hardness scale. 2)Young's Modulus, calculated using 0.01 in/min. step rate of strain with a sample size of 0.79 inch 2. 3) The ASTM D5470 test fixture was used. The recorded value includes interfacial thermal resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. Section C Gap Pad 2500 is offered with inherent natural tack on both sides of the material allowing for stick-in-place characteristics during application assembly.The material is supplied with protective liners on both sides. Deflection (% strain) Thermal Impedance (C-in2/W) 0.040" (3) Section B Gap Pad 2500 is a thermally conductive, electrically insulating, un-reinforced gap filling material. Gap Pad 2500 is a filled-polymer material yielding an elastic polymer that allows for easy handling and converting without the need for reinforcement.These properties also allow for good wet-out and interfacing characteristics to surfaces with roughness and/or topography. All these characteristics make this material ideal for applications using either clip or screw-mounted assemblies. NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. 0816 = Standard sheet size 8" x 16", or 00 = custom configuration 02 = Natural tack, both sides Standard thicknesses available: 0.020", 0.040", 0.060", 0.080", 0.100", 0.125" 0.60 1.00 1.40 1.80 Thermal Resistance (C-in2/W) GP2500 = Gap Pad 2500 Material Note: To build a part number, visit our website at www.bergquistcompany.com. www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company Asia Headquarters Hong Kong Phone: 852-2690-9296 Fax: 852-2690-2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_GP_2500_0711 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: GP2500-0.040-02-0816