SMLJ5.0 thru SMLJ170CA, e3 and SMLG5.0 thru SMLG170CA, e3 SURFACE MOUNT 3000 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION APPEARANCE The SMLJ5.0-170A or SMLG5.0-170A series of 3000 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMLJ) with the DO-214AB package for greater PC board mounting density or in a Gull-wing design (SMLG) in the DO-215AB for visible solder connections. Selections include unidirectional and bidirectional. They can protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein, or for inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS * Economical surface mount TVS design in both J-bend or Gull-wing terminations with fast response * Available in both Unidirectional and Bidirectional construction with a C or CA suffix * Selections for 5.0 to 170 volts standoff voltages (VWM) * Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in the operating direction for unidirectional or both directions for bidirectional) * Options for screening in accordance with MIL-PRF19500 for JANTX are available by adding MX prefix to the part number. * Axial-lead packages for thru-hole mounting available as 5KP5.0-110A with 5000 W rating (consult factory for other surface mount options) * RoHS Compliant devices available by adding e3 suffix * Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B * * * * * * MAXIMUM RATINGS Suppresses transients up to 3000 watts @ 10/1000 s Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1 & 2: SML 5.0 to SML 170A or CA Class 3: SML 5.0 to SML 150A or CA Class 4: SML 5.0 to SML 75A or CA Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1: SML 5.0 to SML 170A or CA Class 2: SML 5.0 to SML 90A or CA Class 3: SML 5.0 to SML 48A or CA Class 4: SML 5.0 to SML 24A or CA Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: SML 5.0 to SML 43A or CA Class 3: SML 5.0 to SML 22A or CA Class 4: SML 5.0 to SML10A or CA MECHANICAL AND PACKAGING * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Gull-wing or C-bend (modified J-bend) leads with tin-lead or RoHS Compliant annealed matte-Tin plating solderable per MIL-STD-750, method 2026 POLARITY: Cathode indicated by band. No marking on bidirectional devices MARKING: Part number without SM and G or J prefix (e.g. L5.0, L5.0A, L5.0Ae3, L5.0CA, L36, L36A, L36Ae3, L36CAe3, etc.) TAPE & REEL option: Standard per EIA-481-2 with 16 mm tape, 750 per 7 inch reel or 2500 per 13 inch reel (add "TR" suffix to part number) WEIGHT: 0.25 grams Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 SML 5.0 - 170V, e3 * Peak Pulse Power dissipation at 25 C: 3000 watts at 10/1000 s (also see Fig 1,2, and 3) * Impulse repetition rate (duty factor): 0.01% * tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional * Operating and Storage temperature: -65C to +150C * Thermal resistance: 17.5C/W junction to lead, or 77.5C/W junction to ambient when mounted on FR4 PC board (1 oz Cu) with recommended footprint o Steady-State Power dissipation: 6 watts at TL = 45 C, or 1.61 watts at TA = 25 C when mounted on FR4 PC board with recommended footprint * Forward Surge at 25C: 200 Amps peak impulse of 8.3 ms half-sine wave (unidirectional only) * Solder temperatures: 260 C for 10 s (maximum) Copyright (c) 2009 SA3-47, REV K, 5-24-2009 WWW . Microsemi .C OM DESCRIPTION SMLJ5.0 thru SMLJ170CA, e3 and SMLG5.0 thru SMLG170CA, e3 SURFACE MOUNT 3000 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION Copyright (c) 2009 SA3-47, REV K, 5-24-2009 Volts 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 45 45 BREAKDOWN VOLTAGE V(BR) @ I(BR) Volts I(BR) mA MIN. MAX. 10 6.40 - 7.30 10 6.40 - 7.00 10 6.67 - 8.15 10 6.67 - 7.37 10 7.22 - 8.82 10 7.22 - 7.98 10 7.78 - 9.51 10 7.78 - 8.60 1 8.33 - 10.2 1 8.33 - 9.21 1 8.89 - 10.9 1 8.89 - 9.83 1 9.44 - 11.5 1 9.44 - 10.4 1 10.0 - 12.2 1 10.0 - 11.1 1 11.1 - 13.6 1 11.1 - 12.3 1 12.2 - 14.9 1 12.2 - 13.5 1 13.3 - 16.3 1 13.3 - 14.7 1 14.4 - 17.6 1 14.4 - 15.9 1 15.6 - 19.1 1 15.6 - 17.2 1 16.7 - 20.4 1 16.7 - 18.5 1 17.8 - 21.8 1 17.8 - 19.7 1 18.9 - 23.1 1 18.9 - 20.9 1 20.0 - 24.4 1 20.0 - 22.1 1 22.2 - 27.1 1 22.2 - 24.5 1 24.4 - 29.8 1 24.4 - 26.9 1 26.7 - 32.6 1 26.7 - 29.5 1 28.9 - 35.3 1 28.9 - 31.9 1 31.1 - 38.0 1 31.1 - 34.4 1 33.3 - 40.7 1 33.3 - 36.8 1 36.7 - 44.9 1 36.7 - 40.6 1 40.0 - 48.9 1 40.0 - 44.2 1 44.4 - 54.3 1 44.4 - 49.1 1 47.8 - 58.4 1 47.8 - 52.8 1 50.0 - 61.1 1 50.0 - 55.3 MAXIMUM CLAMPING VOLTAGE VC @ IPP Volts 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 PEAK PULSE CURRENT (See Fig. 2) IPP Amps 312.5 326.0 263.2 291.3 243.9 267.9 225.6 250.0 209.8 232.6 200.0 220.6 188.6 208.4 177.4 194.8 159.6 176.4 149.2 164.8 136.4 150.6 126.0 139.4 116.2 129.4 111.6 123.0 104.2 115.4 98.4 106.6 93.2 102.8 83.8 92.6 76.2 84.4 69.8 77.2 64.4 71.2 60.0 66.0 56.0 62.0 50.4 56.2 46.6 51.6 42.0 46.4 39.2 43.2 37.4 41.2 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 MAXIMUM STANDBY CURRENT @ VWM ID A 1000 1000 1000 1000 500 500 200 200 100 100 50 50 25 25 10 10 5 5 5 5 5 5 5 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page 2 SML 5.0 - 170V, e3 MICROSEMI PART NUMBER GULL-WING MODIFIED "J" LEAD BEND LEAD SMLJ5.0 SMLG5.0 SMLJ5.0A SMLG5.0A SMLJ6.0 SMLG6.0 SMLJ6.0A SMLG6.0A SMLJ6.5 SMLG6.5 SMLJ6.5A SMLG6.5A SMLJ7.0 SMLG7.0 SMLJ7.0A SMLG7.0A SMLJ7.5 SMLG7.5 SMLJ7.5A SMLG7.5A SMLJ8.0 SMLG8.0 SMLJ8.0A SMLG8.0A SMLJ8.5 SMLG8.5 SMLJ8.5A SMLG8.5A SMLJ9.0 SMLG9.0 SMLJ9.0A SMLG9.0A SMLJ10 SMLG10 SMLJ10A SMLG10A SMLJ11 SMLG11 SMLJ11A SMLG11A SMLJ12 SMLG12 SMLJ12A SMLG12A SMLJ13 SMLG13 SMLJ13A SMLG13A SMLJ14 SMLG14 SMLJ14A SMLG14A SMLJ15 SMLG15 SMLJ15A SMLG15A SMLJ16 SMLG16 SMLJ16A SMLG16A SMLJ17 SMLG17 SMLJ17A SMLG17A SMLJ18 SMLG18 SMLJ18A SMLG18A SMLJ20 SMLG20 SMLJ20A SMLG20A SMLJ22 SMLG22 SMLJ22A SMLG22A SMLJ24 SMLG24 SMLJ24A SMLG24A SMLJ26 SMLG26 SMLJ26A SMLG26A SMLJ28 SMLG28 SMLJ28A SMLG28A SMLJ30 SMLG30 SMLJ30A SMLG30A SMLJ33 SMLG33 SMLJ33A SMLG33A SMLJ36 SMLG36 SMLJ36A SMLG36A SMLJ40 SMLG40 SMLJ40A SMLG40A SMLJ43 SMLG43 SMLJ43A SMLG43A SMLJ45 SMLG45 SMLJ45A SMLG45A REVERSE STANDOFF VOLTAGE VWM WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS @ 25oC SMLJ5.0 thru SMLJ170CA, e3 and SMLG5.0 thru SMLG170CA, e3 SURFACE MOUNT 3000 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION * * Volts 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 BREAKDOWN VOLTAGE V(BR) @ I(BR) Volts I(BR) mA MIN. MAX. 1 53.3 - 65.1 1 53.3 - 58.9 1 56.7 - 69.3 1 56.7 - 62.7 1 60.0 - 73.3 1 60.0 - 66.3 1 64.4 - 78.7 1 64.4 - 71.2 1 66.7 - 81.5 1 66.7 - 73.7 1 71.1 - 86.9 1 71.1 - 78.6 1 77.8 - 95.1 1 77.8 - 86.0 1 83.3 - 102.0 1 83.3 - 92.1 1 86.7 - 106.0 1 86.7 - 95.8 1 94.4 - 115.0 1 94.4 - 104.0 1 100 - 122 1 100 - 111 1 111 - 136 1 111 - 123 1 122 - 149 1 122 - 135 1 133 - 163 1 133 - 147 1 144 - 176 1 144 - 159 1 167 - 204 1 167 - 185 1 178 - 218 1 178 - 197 1 189 - 231 1 189 - 209 MAXIMUM CLAMPING VOLTAGE VC @ IPP Volts 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 107.0 96.8 114.0 103.0 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 PEAK PULSE CURRENT (See Fig. 2) IPP Amps 35.0 38.8 37.0 36.4 31.2 34.4 29.2 32.0 28.0 31.0 26.4 29.2 24.0 26.6 22.4 24.8 21.6 22.8 19.8 20.8 18.8 20.6 16.8 18.6 15.4 16.8 14.0 15.6 13.0 14.4 11.2 12.4 10.4 11.6 9.8 11.0 MAXIMUM STANDBY CURRENT @ VWM ID A 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 SYMBOLS & DEFINITIONS Definition Symbol Symbol VWM PPP V(BR) ID Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current Copyright (c) 2009 SA3-47, REV K, 5-24-2009 IPP VC I(BR) Definition Peak Pulse Current Clamping Voltage Breakdown Current for V(BR) Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 SML 5.0 - 170V, e3 For Bidirectional device types indicate a C or CA suffix after the part number. (i.e.: SMLG170CA or SMLJ170C). Bidirectional capacitance is half that shown in Figure 4 at zero volts. Microsemi Corp's SML series (3000W) surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large surface contact for good heat dissipation, and a low resistance path for surge current flow to ground. These high-speed transient voltage suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS devices. WWW . Microsemi .C OM MICROSEMI PART NUMBER GULL-WING MODIFIED "J" LEAD BEND LEAD SMLJ48 SMLG48 SMLJ48A SMLG48A SMLJ51 SMLG51 SMLJ51A SMLG51A SMLJ54 SMLG54 SMLJ54A SMLG54A SMLJ58 SMLG58 SMLJ58A SMLG58A SMLJ60 SMLG60 SMLJ60A SMLG60A SMLJ64 SMLG64 SMLJ64A SMLG64A SMLJ70 SMLG70 SMLJ70A SMLG70A SMLJ75 SMLG75 SMLJ75A SMLG75A SMLJ78 SMLG78 SMLJ78A SMLG78A SMLJ85 SMLG85 SMLJ85A SMLG85A SMLJ90 SMLG90 SMLJ90A SMLG90A SMLJ100 SMLG100 SMLJ100A SMLG100A SMLJ110 SMLG110 SMLJ110A SMLG110A SMLJ120 SMLG120 SMLJ120A SMLG120A SMLJ130 SMLG130 SMLJ130A SMLG130A SMLJ150 SMLG150 SMLJ150A SMLG150A SMLJ160 SMLG160 SMLJ160A SMLG160A SMLJ170 SMLG170 SMLJ170A SMLG170A REVERSE STANDOFF VOLTAGE VWM SMLJ5.0 thru SMLJ170CA, e3 and SMLG5.0 thru SMLG170CA, e3 SURFACE MOUNT 3000 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION 100 (PPP) - Peak Pulse Power - kW (Waveform - See Figure 2) Non-repetitive 10 Test wave form parameterxs tr = 10sec. tp = 1000sec. WWW . Microsemi .C OM GRAPHS 1.0 0 1s 10sec 100sec tp - Pulse Time - sec 1ms 10ms FIGURE 2 - PULSE WAVEFORM FIGURE 1 - Peak Pulse Power vs. Pulse Time C: Capacitance in pico farads Peak Pulse Power (PPP) or continuous o Power in Percent of 25 C Rating PAD LAYOUT o TL Lead Temperature C A B C INCHES 0.510 0.110 0.150 SMLJ mm 9.90 2.79 3.81 SMLG BV: Breakdown Voltage in Volts FIGURE 3 - Derating Curve A B C INCHES .390 .110 .150 FIGURE 4 Typical Capacitance vs. Breakdown Voltage mm 12.95 2.79 3.81 DO-215AB MIN MAX A .115 .121 MIN MAX 2.92 3.07 DIMENSIONS IN INCHES B C D E F .260 .220 .305 .077 .380 .280 .245 .320 .104 .400 DIMENSIONS IN MILLIMETERS 6.60 5.59 7.75 1.95 9.65 7.11 6.22 8.13 2.65 10.16 K .025 .040 L .030 .060 0.635 1.016 .760 1.520 Typical Standoff Height: 0.004" - 0.008" (0.1mm - 0.2mm) Copyright (c) 2009 SA3-47, REV K, 5-24-2009 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4 SML 5.0 - 170V, e3 PACKAGE DIMENSIONS DO-214AB