PRODUCT FAMILY DATA SHEET
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS163 REV 5A
Cree® XLamp® CMA3090 LED
PRODUCT DESCRIPTION
Cree’s XLamp® High-Current LED Array
family is optimized for best-in-class
lumen output, efcacy and reliability at
high drive currents. XLamp CMA LEDs
share the same package design and
LES sizes as Cree’s industry-leading
CXA2 Standard Density LEDs, enabling
lighting manufacturers to address a
range of performance requirements
for applications such as track,
downlight and outdoor lighting using
a single easy-to-use platform. XLamp
High-Current LED Arrays are available
in 2-step, 3-step and 5-step EasyWhite®
bins.
FEATURES
• 23-mm optical source
• Mechanical and optical design
consistent with CXA3070 and
CXB3070 LEDs
• Available in 70-, 80-, 90- and
95-minimum CRI options
• Cree EasyWhite® 2-, 3- and 5-step
binning
• Premium Color 2- and 3-step binning
• Forward voltage options: 48-V class,
72-V class
• 85°C binning and characterization
• Maximum drive current: 3600mA
(48V), 2400mA (72V)
• 115° viewing angle, uniform
chromaticity profile
• Top-side solder connections
• RoHS and REACh compliant
• UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ............................................2
Operating Limits ..........................................3
Flux Characteristics, EasyWhite® Order
Codes and Bins - 48V .................................4
Flux Characteristics, Premium Color
Order Codes and Bins - 48V ......................5
Flux Characteristics, EasyWhite® Order
Codes and Bins - 72V .................................6
Flux Characteristics, Premium Color
Order Codes and Bins- 72V .......................7
Relative Spectral Power Distribution,
EasyWhite® LEDs .........................................8
Relative Spectral Power Distribution,
Premium Color LEDs ...................................9
Electrical Characteristics ......................... 11
Relative Luminous Flux ............................ 12
Typical Spatial Distribution ...................... 13
Performance Groups - Chromaticity ....... 14
Premium Color Performance Groups -
Chromaticity ............................................. 15
Cree EasyWhite® Bins Plotted on the
1931 CIE Color Spac ................................ 16
Cree Premium Color Bins Plotted on the
1931 CIE Color Space .............................. 17
Bin and Order Code Formats ................... 19
Mechanical Dimensions .......................... 20
Thermal Design ........................................ 21
Notes ........................................................ 23
Packaging ................................................. 24
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLAMP® CMA3090 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Viewing angle (FWHM) degrees 115
ESD withstand voltage (JEDEC JS-001-2012) V Class 3A
DC forward current (48V) mA 3600*
DC forward current (72V) mA 2400*
Reverse current (48V, 72V) mA 0.1
Forward voltage (48V, @ 1800mA, Tj = 85°C) V 45 50
Forward voltage (72V, @ 1200mA, Tj = 85°C) V 68 75
* Refer to the Operating Limits section.
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLAMP® CMA3090 LED
OPERATING LIMITS
The maximum current rating of the CMA3090 depends on the case temperature (Tc) when the LED has reached thermal equilibrium
under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal
interface material and heat sink) and may vary when poor thermal management is employed. Either solder pad shown in the Mechanical
Dimensions section on page 20 can be used as the Tc measurement point.
Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree recommends a
maximum LES temperature of 140°C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 21 for more
information on LES temperature measurement.
CMA3090 - Standard
0
400
800
1200
1600
2000
2400
2800
3200
3600
4000
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
48 V
85 °C, 3600 mA
125 °C,
1385 mA
CMA3090 - Standard
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
72 V
85 °C, 2400 mA
125 °C,
923 mA
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLAMP® CMA3090 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 23).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 48V (IF = 1800mA, TJ = 85°C)
The following table provides order codes for XLamp CMA3090 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 19).
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step 5-Step
Min. Typ Group Order Code Group Order Code Group Order Code
6500 K
70 73 12,573 13,519 65E CMA3090-0000-
000Q0B0A65E
80 82 11,746 12,630 65E CMA3090-0000-
000Q0H0A65E
5700 K
70 73 12,830 13,795 57E CMA3090-0000-
000Q0B0A57E
80 82 11,986 12,888 57E CMA3090-0000-
000Q0H0A57E
90 92 10,195 10,962 57G CMA3090-0000-
000Q0U0A57G
5000K
70 73 12,458 13,396 50E CMA3090-0000-
000Q0B0A50E
80 82 11,638 12,515 50G CMA3090-0000-
000Q0H0A50G
90 92 10,195 10,962 50G CMA3090-0000-
000Q0U0A50G
4000K
70 73 12,364 13,295 40E CMA3090-0000-
000Q0B0A40E
80 82 11,506 12,372 40H CMA3090-0000-
000Q0H0A40H 40G CMA3090-0000-
000Q0H0A40G
90 92 9,907 10,652 40H CMA3090-0000-
000Q0U0A40H 40G CMA3090-0000-
000Q0U0A40G
3500K
80 82 11,225 12,070 35H CMA3090-0000-
000Q0H0A35H 35G CMA3090-0000-
000Q0H0A35G
90 92 9,635 10,360 35H CMA3090-0000-
000Q0U0A35H 35G CMA3090-0000-
000Q0U0A35G
3000K
70 73 11,506 12,372 30E CMA3090-0000-
000Q0B0A30E
80 82 10,900 11,720 30H CMA3090-0000-
000Q0H0A30H 30G CMA3090-0000-
000Q0H0A30G
90 92 9,215 9,909 30H CMA3090-0000-
000Q0U0A30H 30G CMA3090-0000-
000Q0U0A30G
2700K
80 82 10,459 11,246 27H CMA3090-0000-
000Q0H0A27H 27G CMA3090-0000-
000Q0H0A27G
90 92 8,799 9,461 27H CMA3090-0000-
000Q0U0A27H 27G CMA3090-0000-
000Q0U0A27G
2200K 80 82 9,215 9,909 22G CMA3090-0000-
000Q0H0A22G
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLAMP® CMA3090 LED
FLUX CHARACTERISTICS, PREMIUM COLOR ORDER CODES AND BINS - 48V (IF = 1800mA, TJ = 85°C)
Fidelity
Nominal
CCT
CRI* Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step
Min. Typ Group Order Code
4000K 95 98 8,873 9,541 L5A CMA3090-0000-000Q0Z0AL5A
3500K 95 98 8,636 9,286 35H CMA3090-0000-000Q0Z0A35H
3000K 95 98 8,075 8,682 30H CMA3090-0000-000Q0Z0A30H
2700K 95 98 7,645 8,220 27H CMA3090-0000-000Q0Z0A27H
Specialty
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code Group Order Code
3100K 90 92 9,215 9,909 31Q CMA3090-0000-
000Q0U0A31Q
3000K
80 82 10,900 11,720 L7B CMA3090-0000-
000Q0H0AL7B
90 92 9,215 9,909 30Q CMA3090-0000-
000Q0U0A30Q 30U CMA3090-0000-
000Q0U0A30U
95 98 8,075 8,682 L7C CMA3090-0000-
000Q0Z0AL7C
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 23).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLAMP® CMA3090 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 23).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 72V (IF = 1200mA, TJ = 85°C)
The following table provides order codes for XLamp CMA3090 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 19).
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step 5-Step
Min. Typ Group Order Code Group Order Code Group Order Code
6500 K
70 73 12,573 13,519 65E CMA3090-0000-
000R0B0A65E
80 82 11,746 12,630 65E CMA3090-0000-
000R0H0A65E
5700 K
70 73 12,830 13,795 57E CMA3090-0000-
000R0B0A57E
80 82 11,986 12,888 57E CMA3090-0000-
000R0H0A57E
90 92 10,195 10,962 57G CMA3090-0000-
000R0U0A57G
5000K
70 73 12,458 13,396 50E CMA3090-0000-
000R0B0A50E
80 82 11,638 12,515 50G CMA3090-0000-
000R0H0A50G
90 92 10,195 10,962 50G CMA3090-0000-
000R0U0A50G
4000K
70 73 12,364 13,295 40E CMA3090-0000-
000R0B0A40E
80 82 11,506 12,372 40H CMA3090-0000-
000R0H0A40H 40G CMA3090-0000-
000R0H0A40G
90 92 9,907 10,652 40H CMA3090-0000-
000R0U0A40H 40G CMA3090-0000-
000R0U0A40G
3500K
80 82 11,225 12,070 35H CMA3090-0000-
000R0H0A35H 35G CMA3090-0000-
000R0H0A35G
90 92 9,635 10,360 35H CMA3090-0000-
000R0U0A35H 35G CMA3090-0000-
000R0U0A35G
3000K
70 73 11,506 12,372 30E CMA3090-0000-
000R0B0A30E
80 82 10,900 11,720 30H CMA3090-0000-
000R0H0A30H 30G CMA3090-0000-
000R0H0A30G
90 92 9,215 9,909 30H CMA3090-0000-
000R0U0A30H 30G CMA3090-0000-
000R0U0A30G
2700K
80 82 10,459 11,246 27H CMA3090-0000-
000R0H0A27H 27G CMA3090-0000-
000R0H0A27G
90 92 8,799 9,461 27H CMA3090-0000-
000R0U0A27H 27G CMA3090-0000-
000R0U0A27G
2200K 80 82 9,215 9,909 22G CMA3090-0000-
000R0H0A22G
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLAMP® CMA3090 LED
FLUX CHARACTERISTICS, PREMIUM COLOR ORDER CODES AND BINS- 72V (IF = 1200mA, TJ = 85°C)
Fidelity
Nominal
CCT
CRI* Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step
Min. Typ Group Order Code
4000K 95 98 8,873 9,541 L5A CMA3090-0000-000R0Z0AL5A
3500K 95 98 8,636 9,286 35H CMA3090-0000-000R0Z0A35H
3000K 95 98 8,075 8,682 30H CMA3090-0000-000R0Z0A30H
2700K 95 98 7,645 8,220 27H CMA3090-0000-000R0Z0A27H
Specialty
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code Group Order Code
3100K 90 92 9,215 9,909 31Q CMA3090-0000-
000R0U0A31Q
3000K
80 82 10,900 11,720 L7B CMA3090-0000-
000R0H0AL7B
90 92 9,215 9,909 30Q CMA3090-0000-
000R0U0A30Q 30U CMA3090-0000-
000R0U0A30U
95 98 8,075 8,682 L7C CMA3090-0000-
000R0Z0AL7C
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 23).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLAMP® CMA3090 LED
RELATIVE SPECTRAL POWER DISTRIBUTION, EASYWHITE® LEDS
The following graphs are the result of a series of pulsed measurements at 1800 mA for the 48-V CMA3090, 1200 mA for the 72-V
CMA3090 and TJ = 85°C.
Relative Spectral Power Distribution
EZW 70 CRI
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
6500 K, 70 CRI
5700 K, 70 CRI
5000 K, 70 CRI
4000 K, 70 CRI
3000 K, 70 CRI
EZW 80 CRI
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
6500 K, 80 CRI
5700 K, 80 CRI
5000 K, 80 CRI
4000 K, 80 CRI
3500 K, 80 CRI
3000 K, 80 CRI
2700 K, 80 CRI
2200 K, 80 CRI
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLAMP® CMA3090 LED
RELATIVE SPECTRAL POWER DISTRIBUTION, EASYWHITE® LEDS - CONTINUED
RELATIVE SPECTRAL POWER DISTRIBUTION, PREMIUM COLOR LEDS
The following graphs are the result of a series of pulsed measurements at 1800 mA for the 48-V CMA3090, 1200 mA for the 72-V
CMA3090 and TJ = 85°C.
Fidelity
EZW 90 CRI
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
5700 K, 90 CRI
5000 K, 90 CRI
4000 K, 90 CRI
3500 K, 90 CRI
3000 K, 90 CRI
2700 K, 90 CRI
Fidelity
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
4000 K, Z CRI
3500 K, Z CRI
3000 K, Z CRI
2700 K, Z CRI
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLAMP® CMA3090 LED
RELATIVE SPECTRAL POWER DISTRIBUTION, PREMIUM COLOR LEDS - CONTINUED
Specialty
Speciality
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
31Q, 3100 K, 90 CRI
Speciality
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
30Q, 3000 K, 90 CRI
30U, 3000 K, 90 CRI
L7B, 3000 K, 80 CRI
L7C, 3000 K, Z CRI
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLAMP® CMA3090 LED
ELECTRICAL CHARACTERISTICS
The following graphs are the result of a series of steady-state measurements.
41
42
43
44
45
46
47
48
49
50
400 800 1200 1600 2000 2400 2800 3200 3600
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
48 V
62
64
66
68
70
72
74
76
300 600 900 1200 1500 1800 2100 2400
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
72 V
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLAMP® CMA3090 LED
RELATIVE LUMINOUS FLUX
The relative luminous ux values provided below are the ratio of:
• Measurements of CMA3090 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 1800mA at TJ = 85°C for the 48-V CMA3090.
Using the 48-V CMA3090 LED as an example,, at steady-state operation of Tc = 25°C, IF = 1200mA, the relative luminous ux ratio is 75%
in the chart below. A 48-V CMA3090 LED that measures 9909lm during binning will deliver 7432lm (9909 * .75) at steady-state operation
of Tc = 25°C, IF = 1200mA.
0%
25%
50%
75%
100%
125%
150%
175%
200%
400 800 1200 1600 2000 2400 2800 3200 3600
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
48 V
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLAMP® CMA3090 LED
RELATIVE LUMINOUS FLUX - CONTINUED
The relative luminous ux values provided below are the ratio of:
• Measurements of CMA3090 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 1200mA at TJ = 85°C for the 72-V CMA3090.
Using the 72-V CMA3090 LED as an example,, at steady-state operation of Tc = 55°C, IF = 1500mA, the relative luminous ux ratio is
125% in the chart below. A 72-V CMA3090 LED that measures 9,909lm during binning will deliver 12,386lm (9,909 * 1.25) at steady-state
operation of Tc = 55°C, IF = 1500mA.
TYPICAL SPATIAL DISTRIBUTION
0%
25%
50%
75%
100%
125%
150%
175%
200%
300 600 900 1200 1500 1800 2100 2400
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
72 V
Far Field
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLAMP® CMA3090 LED
PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C)
XLamp CMA3090 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Code CCT x y
40H 4000 K
0.3777 0.3739
0.3797 0.3816
0.3861 0.3855
0.3838 0.3777
35H 3500 K
0.4022 0.3858
0.4053 0.3942
0.4125 0.3977
0.4091 0.3891
30H 3000 K
0.4287 0.3975
0.4328 0.4064
0.4390 0.4086
0.4347 0.3996
27H 2700 K
0.4524 0.4048
0.4574 0.4140
0.4633 0.4154
0.4581 0.4062
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
57G 5700K 0.3287 0.3417 0.00738 0.00360 72.0
50G 5000K 0.3447 0.3553 0.00840 0.00312 65.0
40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7
35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0
30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2
27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5
22G 2200K 0.5066 0.4158 0.00980 0.00480 45.5
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
65E 6500K 0.3123 0.3282 0.01110 0.00550 61.0
57E 5700K 0.3287 0.3417 0.01230 0.00600 72.0
50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0
40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7
30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLAMP® CMA3090 LED
PREMIUM COLOR PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C)
XLamp CMA3090 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
Fidelity
EasyWhite Color Temperatures – 2-Step
Code CCT x y
L5A 4000K
0.3764 0.3711
0.3784 0.3787
0.3847 0.3826
0.3825 0.3748
35H 3500K
0.4022 0.3858
0.4053 0.3942
0.4125 0.3977
0.4091 0.3891
30H 3000K
0.4287 0.3975
0.4328 0.4064
0.4390 0.4086
0.4347 0.3996
27H 2700K
0.4524 0.4048
0.4574 0.4140
0.4633 0.4154
0.4581 0.4062
Specialty
EasyWhite Color Temperatures – 2-Step
Code CCT x y
L7B 3000K
0.4263 0.3848
0.4296 0.3916
0.4361 0.3938
0.4326 0.3868
L7C 3000K
0.4192 0.3754
0.4224 0.3823
0.4291 0.3847
0.4257 0.3777
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
31Q 3100K 0.4236 0.3888 0.00848 0.00455 50.3
30Q 3000K 0.4305 0.3935 0.00834 0.00408 53.2
30U 3000K 0.4274 0.3837 0.00834 0.00408 53.2
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLAMP® CMA3090 LED
CREE EASYWHITE® BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C)
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLAMP® CMA3090 LED
CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C)
Fidelity (2-step)
2700K
3000K
3500K
4000K
4500K
L5A
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
CCy
CCx
ANSI C78.377 Quadrangle
35H
30H
27H
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLAMP® CMA3090 LED
CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C) - CONTINUED
Speciality (2-step)
Speciality (3-step)
3000 K
3500 K
L7B
L7C
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.41
0.42
0.43
0.44
0.45
0.46
CCy
CCx
ANSI C78.377 Quadrangle
3000K
3500K
30Q
30U
31Q
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.41
0.42
0.43
0.44
0.45
0.46
CCy
CCx
ANSI C78.377 Quadrangle
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLAMP® CMA3090 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes are congured as follows:
Order Code Bin Code
SSSSSCC-HHHH-HHHGGRNNNNN
Series = CMA30
Internal code
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Z = 95 CRI minimum
Kit code
Vf class
Q0 = 48-V class
R0 = 72-V class
Performance class
SSSSSCC-WWW-FF-GGR-AAAAA
Series = CMA30
Chromaticity bin
Vf class
Q0 = 48-V class
R0 = 72-V class
Internal code
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Z = 95 CRI minimum
Flux bin
0A = Not binned into flux bins
Performance class
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLAMP® CMA3090 LED
MECHANICAL DIMENSIONS
Dimensions are in mm.
Tolerances unless otherwise specied: +.13
x° +1°
Meaning of LED Marking
M3090Q = 48-V CMA3090
M3090R = 72-V CMA3090
X1 X2 X3 X4 X5
X1 CCT
1 = 6500K
2 = 5700K
3 = 5000K
5 = 4000K
6 = 3500K
7 = 3000K
8 = 2700K
A = 2200K
X2
M = EasyWhite or
Fidelity LED on the
black-body line
Q = Specialty LED below
the black-body line
U = Specialty LED below
the black-body line
X3 X4 Flux bin
0A = Not binned into ux
bins
X5 CRI
B = 70 CRI min
H = 80 CRI min
U = 90 CRI min
Z = 95 CRI min
Tc measurement point: either the anode or cathode solder pad
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLAMP® CMA3090 LED
THERMAL DESIGN
The CMA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction
temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum
TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to
ensure that the CMA LED is being operated within its designed limits. LES temperature measurement provides additional verication of
good thermal design. Please refer to page 2 for the Operating Limit specication.
There is no need to calculate for TJ inside the package, as the thermal management design process, specically from solder point (TSP) to
ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please
refer to the Thermal Management application note. For CMA soldering recommendations and information on thermal interface materials
(TIM), LES temperature measurement, and connection methods, please refer to the Cree XLamp CM Family LEDs soldering and handling
document.
To keep the CMA3090 LED at or below the maximum rated Tc, the case to ambient temperature
thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following
graphs, depending on the operating environment. The y-axis in the graphs is a base 10 logarithmic
scale.
As the gure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim)
plus the thermal resistance of the heat sink (R_hs).
R_j-c
Tc
R_tim
R_hs
Ta
R_j-c
Tc
R_c-a
Ta
CMA3090 - Standard
0.01
0.10
1.00
10.00
400 800 1200 1600 2000 2400 2800 3200 3600
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
48 V
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLAMP® CMA3090 LED
THERMAL DESIGN - CONTINUED
CMA3090
0.01
0.10
1.00
10.00
300 600 900 1200 1500 1800 2100 2400
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
72 V
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLAMP® CMA3090 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Pre-Release Qualication Testing
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualication testing for XLamp LEDs. Cree did not perform Room Temperature Operating Life
(RTOL) testing on the CMA3090 LED
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLAMP® CMA3090 LED
PACKAGING
Cree CMA3090 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100
LEDs per carton. Each carton contains 100 LEDs from the same performance bin.
Dimensions are in inches.
Tolerances: +.13
x° +1°
PATENT LABEL IS LOCATED
ON UNDERSIDE OF CARTON
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
BAG
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
8.15
7.53
1.313
1.313
.38
R.375
1/10.500
A
CXA30XX_DATASHEET_BAG_2013
CXA30XX_DATASHEET
LABEL WITH CREE BIN
CODE, QUANTITY, LOT#
BAG
PATENT LABELIS LOCATED
ON UNDERSIDE OF CARTON
LABEL WITH CREE BIN
CODE, QUANTITY, LOT#
LABEL WITH CREE BIN
CODE, QUANTITY, LOT#
LABEL WITH CREE BIN CODE,
QUANTITY, LOT #
1.313
1.313
7.500
8.125
R.375