Document Number: 91139 www.vishay.com
S10-2464-Rev. D, 25-Oct-10 1
Power MOSFET
IRFD9120, SiHFD9120
Vishay Siliconix
FEATURES
• Dynamic dV/dt Rating
• Repetitive Avalanche Rated
• For Automatic Insertion
•End Stackable
• P-Channel
• 175 °C Operating Temperature
•Fast Switching
• Compliant to RoHS Directive 2002/95/EC
DESCRIPTION
Third generation Power MOSFETs from Vishay provide the
designer with the best combination of fast switching,
ruggedized device design, low on-resistance and
cost-effectiveness.
The 4 pin DIP package is a low cost machine-insertiable
case style which can be stacked in multiple combinations on
standard 0.1" pin centers. The dual drain serves as a thermal
link to the mounting surface for power dissipation levels up
to 1 W.
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. VDD = - 25 V, starting TJ = 25 °C, L = 52 mH, Rg = 25 , IAS = - 2.0 A (see fig. 12).
c. ISD - 6.8 A, dI/dt 110 A/μs, VDD VDS, TJ 175 °C.
d. 1.6 mm from case.
PRODUCT SUMMARY
VDS (V) - 100
RDS(on) ()V
GS = - 10 V 0.60
Qg (Max.) (nC) 18
Qgs (nC) 3.0
Qgd (nC) 9.0
Configuration Single
S
G
D
P-Channel MOSFET
HVMDIP
D
SG
Available
RoHS*
COMPLIANT
ORDERING INFORMATION
Package HVMDIP
Lead (Pb)-free IRFD9120PbF
SiHFD9120-E3
SnPb IRFD9120
SiHFD9120
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER SYMBOL LIMIT UNIT
Drain-Source Voltage VDS - 100 V
Gate-Source Voltage VGS ± 20
Continuous Drain Current VGS at - 10 V TA = 25 °C ID
- 1.0
ATA = 100 °C - 0.70
Pulsed Drain CurrentaIDM - 8.0
Linear Derating Factor 0.0083 W/°C
Single Pulse Avalanche EnergybEAS 140 mJ
Repetitive Avalanche CurrentaIAR - 1.0 A
Repetitive Avalanche EnergyaEAR 0.13 mJ
Maximum Power Dissipation TA = 25 °C PD1.3 W
Peak Diode Recovery dV/dtcdV/dt - 5.5 V/ns
Operating Junction and Storage Temperature Range TJ, Tstg - 55 to + 175 °C
Soldering Recommendations (Peak Temperature) for 10 s 300d
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com Document Number: 91139
2S10-2464-Rev. D, 25-Oct-10
IRFD9120, SiHFD9120
Vishay Siliconix
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. Pulse width 300 μs; duty cycle 2 %.
THERMAL RESISTANCE RATINGS
PARAMETER SYMBOL TYP. MAX. UNIT
Maximum Junction-to-Ambient RthJA - 120 °C/W
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
Static
Drain-Source Breakdown Voltage VDS VGS = 0 V, ID = - 250 μA - 100 - - V
VDS Temperature Coefficient VDS/TJ Reference to 25 °C, ID = - 1 mA - - 0.10 - V/°C
Gate-Source Threshold Voltage VGS(th) VDS = VGS, ID = - 250 μA - 2.0 - - 4.0 V
Gate-Source Leakage IGSS V
GS = ± 20 V - - ± 100 nA
Zero Gate Voltage Drain Current IDSS
VDS = - 100 V, VGS = 0 V - - - 100 μA
VDS = - 80 V, VGS = 0 V, TJ = 150 °C - - - 500
Drain-Source On-State Resistance RDS(on) V
GS = - 10 V ID = - 0.6 Ab- - 0.60
Forward Transconductance gfs VDS = - 50 V, ID = - 0.60 Ab0.71 - - S
Dynamic
Input Capacitance Ciss VGS = 0 V
VDS = - 25 V
f = 1.0 MHz, see fig. 5
- 390 -
pFOutput Capacitance Coss - 170 -
Reverse Transfer Capacitance Crss -45-
Total Gate Charge Qg
VGS = - 10 V ID = - 6.8 A, VDS = - 80 V
see fig. 6 and 13b
--18
nC Gate-Source Charge Qgs --3.0
Gate-Drain Charge Qgd --9.0
Turn-On Delay Time td(on)
VDD = - 50 V, ID = - 6.8 A
Rg = 18 , RD = 7.1 , see fig. 10b
-9.6-
ns
Rise Time tr -29-
Turn-Off Delay Time td(off) -21-
Fall Time tf -25-
Internal Drain Inductance LD Between lead,
6 mm (0.25") from
package and center of
die contact
-4.0-
nH
Internal Source Inductance LS-6.0-
Drain-Source Body Diode Characteristics
Continuous Source-Drain Diode Current ISMOSFET symbol
showing the
integral reverse
p - n junction diode
--- 1.0
A
Pulsed Diode Forward CurrentaISM --- 8.0
Body Diode Voltage VSD TJ = 25 °C, IS = - 1.0 A, VGS = 0 Vb--- 6.3V
Body Diode Reverse Recovery Time trr TJ = 25 °C, IF = - 6.8 A, dI/dt = 100 A/μsb- 98 200 ns
Body Diode Reverse Recovery Charge Qrr - 0.33 0.66 μC
Forward Turn-On Time ton Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD)
D
S
G
S
D
G
Document Number: 91139 www.vishay.com
S10-2464-Rev. D, 25-Oct-10 3
IRFD9120, SiHFD9120
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Fig. 1 - Typical Output Characteristics, TA = 25 °C
Fig. 2 - Typical Output Characteristics, TA = 175 °C
Fig. 3 - Typical Transfer Characteristics
Fig. 4 - Normalized On-Resistance vs. Temperature
TA = 25 °C
TA = 175 °C
www.vishay.com Document Number: 91139
4S10-2464-Rev. D, 25-Oct-10
IRFD9120, SiHFD9120
Vishay Siliconix
Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage
Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage
Fig. 7 - Typical Source-Drain Diode Forward Voltage
Fig. 8 - Maximum Safe Operating Area
TA = 25 °C
TJ = 175 °C
SINGLE PULSE
Document Number: 91139 www.vishay.com
S10-2464-Rev. D, 25-Oct-10 5
IRFD9120, SiHFD9120
Vishay Siliconix
Fig. 9 - Maximum Drain Current vs. Ambient Temperature
Fig. 10a - Switching Time Test Circuit
Fig. 10b - Switching Time Waveforms
Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
ID, Drain Current (A)
TA, Ambient Temperature (°C)
Pulse width ≤ 1 µs
Duty factor ≤ 0.1 %
R
D
V
GS
R
g
D.U.T.
- 10 V
+
-
V
DS
V
DD
VGS
10 %
90 %
VDS
td(on) trtd(off) tf
www.vishay.com Document Number: 91139
6S10-2464-Rev. D, 25-Oct-10
IRFD9120, SiHFD9120
Vishay Siliconix
Fig. 12a - Unclamped Inductive Test Circuit Fig. 12b - Unclamped Inductive Waveforms
Fig. 12c - Maximum Avalanche Energy vs. Drain Current
Fig. 13a - Basic Gate Charge Waveform Fig. 13b - Gate Charge Test Circuit
R
G
I
AS
0.01 Ω
t
p
D.U.T.
L
V
DS
+
-V
DD
- 10 V
Vary t
p
to obtain
required I
AS
IAS
VDS
VDD
VDS
tp
QGS QGD
QG
VG
Charge
- 10 V
D.U.T.
- 3 mA
VGS
VDS
IGID
0.3 µF
0.2 µF
50 kΩ
12 V
Current regulator
Current sampling resistors
Same type as D.U.T.
+
-
Document Number: 91139 www.vishay.com
S10-2464-Rev. D, 25-Oct-10 7
IRFD9120, SiHFD9120
Vishay Siliconix
Fig. 14 - For P-Channel
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?91139.
P.W. Period
dI/dt
Diode recovery
dV/dt
Body diode forward drop
Body diode forward
current
Driver gate drive
Inductor current
D = P.W.
Period
+
-
-
-
-
+
+
+
Peak Diode Recovery dV/dt Test Circuit
• dV/dt controlled by Rg
• D.U.T. - device under test
D.U.T.
Circuit layout considerations
• Low stray inductance
• Ground plane
• Low leakage inductance
current transformer
Rg
• Compliment N-Channel of D.U.T. for driver
VDD
• ISD controlled by duty factor “D”
Note
Note
a. VGS = - 5 V for logic level and - 3 V drive devices
VGS = - 10 Va
D.U.T. lSD waveform
D.U.T. VDS waveform
VDD
Re-applied
voltage
Ripple ≤ 5 % ISD
Reverse
recovery
current
Document Number: 91361 www.vishay.com
Revision: 06-Sep-10 1
Package Information
Vishay Siliconix
HVM DIP (High voltage)
Note
1. Package length does not include mold flash, protrusions or gate burrs. Package width does not include interlead flash or protrusions.
INCHES MILLIMETERS
DIM. MIN. MAX. MIN. MAX.
A 0.310 0.330 7.87 8.38
E 0.300 0.425 7.62 10.79
L 0.270 0.290 6.86 7.36
ECN: X10-0386-Rev. B, 06-Sep-10
DWG: 5974
0.248 [6.29]
0.240 [6.10]
0.197 [5.00]
0.189 [4.80]
0.024 [0.60]
0.020 [0.51]
0.160 [4.06]
0.140 [3.56]
0.180 [4.57]
0.160 [4.06]
4 x
0.100 [2.54] typ.
AL
0.045 [1.14]
0.035 [0.89]
2 x
0.043 [1.09]
0.035 [0.89]
0.094 [2.38]
0.086 [2.18]
0.017 [0.43]
0.013 [0.33]
0° to 15°
2 x
E min.
E max.
0.133 [3.37]
0.125 [3.18]
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
IRFD9123 IRFD9123PBF