MAPD-007530-0001TR - M/A-COM Technology Solutions, Inc.

Low Cost Two-Way GMIC SMT Power Divider

1700 – 2000 MHz

Rev. V2

MAPD-007530-000100

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Small Size and Low Profile

• Typical Insert ion Loss: 0.6 dB

• Typical Amplit ude Balance: 0.2 dB

• 1 Watt Power Handling

• Lead-Free SOT-26 Package

• 100% Matte Tin Plating over Copper

• Halogen-Free “Green” Mold Compound

• 260°C Reflow Compatible

• RoHS* Compliant Version of DS52-0014

Description

M/A-COM’s MAPD-007530-000100 is an IC-based

monolithic power divider using M/A-CO M’s GMIC

technology in a low cost SOT-26 plastic packag e.

This 2-way power divider is ideally suited for applica-

tions where small size, low insertion loss, superior

phase/amplitude tracking and low cost are required.

Typical applications include hand sets, base station

switching networks and other communication

applications where size and PCB real estate are at

a premium. Available in Tape and Reel.

The MAPD-007530-00010 0 is fabricated using a

passive integrated circuit process. The process fea-

tures full-chip passivation for increased performance

and reliability.

Ordering Information

Part Number Package

MAPD-007530-000100 Bulk Packaging

MAPD-007530-0001TR 1000 piece reel

MAPD-007530-0001TB Sample Test Board

Note: Reference Application Note M513 for reel size

information.

Functional Diagram

Pin Configuration

Pin No. Function Pin No. Function

1 RF1 (OUT) 4 GND

2 GND 5 GND

3 RF2 (OUT) 6 RF IN

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Low Cost Two-Way GMIC SMT Power Divider

1700 – 2000 MHz

Rev. V2

MAPD-007530-000100

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications: TA = 25°C1

Parameter Units Min Typ Max

Insertion Loss Above 3.0 dB dB — 0.6 0.8

Isolation dB 16 20 —

VSWR Input

RF1, RF2 Outputs Ratio

Ratio —

— 1.2:1

1.1:1 1.4:1

1.3:1

Amplitude Balance dB — 0.2 0.4

Phase Balance Deg. — 1.5 3.0

Test Conditions

1700 - 2000 MHz

Recommended PCB Configuration

Absolute Maximum Ratings 2,3

Parameter Absolute Maximum

Input Power4 1W CW

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

2. Exceeding any one or combination of these limits may cause

permanent damage to this device.

3. M/A-COM does not recommend sustained operation near

these survivability limits.

4. With internal load dissipation of 0.125 W maximum.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

GMIC Circuits are sensitive to electrostatic dis-

charge (ESD) and can be damaged by static elec-

tricity. Proper ESD control techniques should be

used when handling these devices."

1. All specifications apply with a 50-ohm source and load impedance.

321

.046

.022

Typ.

.006

Typ.

.056

.020 Typ.

Plated Thru Hole

Low Cost Two-Way GMIC SMT Power Divider

1700 – 2000 MHz

Rev. V2

MAPD-007530-000100

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Amplitude Balance vs. Freq uency

VSWR vs. Frequency Isolation vs. Frequency

Typical Performance Curves @ 25ºC

Insertion Loss vs. Frequen cy

Phase Balance vs. Frequen cy

Low Cost Two-Way GMIC SMT Power Divider

1700 – 2000 MHz

Rev. V2

MAPD-007530-000100

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

† Reference Application Note M538 for lead-free solder reflow

recommendations.

Lead-Free SOT-26†