SQJB68EP www.vishay.com Vishay Siliconix Automotive Dual N-Channel 100 V (D-S) 175 C MOSFET FEATURES PowerPAK(R) SO-8L Dual * TrenchFET(R) power MOSFET * AEC-Q101 qualified * 100 % Rg and UIS tested D1 D2 6. 15 m m 3 4 S2 G2 m 1 3 .1 m 5 Top View 1 2 S1 G1 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 D1 D2 Bottom View PRODUCT SUMMARY VDS (V) RDS(on) () at VGS = 10 V 0.0920 RDS(on) () at VGS = 4.5 V 0.1170 ID (A) per leg Configuration Package G1 100 G2 11 S1 Dual N-Channel MOSFET S2 N-Channel MOSFET PowerPAK SO-8L ABSOLUTE MAXIMUM RATINGS (TC = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-source voltage VDS 100 Gate-source voltage VGS 20 TC = 25 C Continuous drain current TC = 125 C Continuous source current (diode conduction) a Pulsed drain current b Single pulse avalanche current L = 0.1 mH Single pulse avalanche energy TC = 25 C Maximum power dissipation b TC = 125 C Operating junction and storage temperature range Soldering recommendations (peak temperature) ID 6 15 IDM 17 IAS 9 PD TJ, Tstg d, e V 11 IS EAS UNIT 4 27 9 -55 to +175 260 A mJ W C THERMAL RESISTANCE RATINGS PARAMETER Junction-to-ambient Junction-to-case (drain) PCB mount c SYMBOL LIMIT RthJA 85 RthJC 5.5 UNIT C/W Notes a. Package limited b. Pulse test; pulse width 300 s, duty cycle 2 % c. When mounted on 1" square PCB (FR4 material) d. See solder profile (www.vishay.com/doc?73257). The PowerPAK SO-8L is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components S17-0969-Rev. A, 26-Jun-17 Document Number: 75582 1 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJB68EP www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. VDS VGS = 0 V, ID = 250 A 100 - - VGS(th) VDS = VGS, ID = 250 A 1.5 2.0 2.5 VDS = 0 V, VGS = 20 V UNIT Static Drain-source breakdown voltage Gate-source threshold voltage Gate-source leakage Zero gate voltage drain current On-state drain current a Drain-source on-state resistance a Forward transconductance b Dynamic IGSS IDSS ID(on) RDS(on) gfs - - 100 VGS = 0 V VDS = 100 V - - 1 VGS = 0 V VDS = 100 V, TJ = 125 C - - 50 VGS = 0 V VDS = 100 V, TJ = 175 C - - 150 VGS = 10 V VDS 5 V 6 - - VGS = 10 V ID = 4 A - 0.0765 0.0920 VGS = 4.5 V ID = 3 A - 0.0967 0.1170 VGS = 10 V ID = 4 A, TJ = 125 C - - 0.1620 VGS = 10 V ID = 4 A, TJ = 175 C - - 0.2056 - 8.6 - - 212 280 - 118 160 VDS = 15 V, ID = 4 A V nA A A S b Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss - 15 20 Total gate charge c Qg - 4.7 8 - 0.8 - Gate-source charge Gate-drain charge c c Gate resistance Turn-on delay time Qgs Rise time c Turn-off delay time c Fall time c VGS = 10 V VDS = 25 V, f = 1 MHz VDS = 50 V, ID = 3 A Qgd pF nC - 1.3 - f = 1 MHz 2 4 6 td(on) - 9 15 tr VDD = 50 V, RL = 33.3 ID 1.5 A, VGEN = 10 V, Rg = 1 - 5 10 - 15 30 - 5 10 - - 17 - 0.88 1.2 V - 29 60 ns - 27 55 nC - 19 - ns Rg c VGS = 0 V td(off) tf ns Source-Drain Diode Ratings and Characteristics b Pulsed current a ISM Forward voltage VSD Body diode reverse recovery time Body diode reverse recovery charge IF = 4 A, VGS = 0 V trr Qrr IF = 3 A, di/dt = 100 A/s A Reverse recovery fall time ta Reverse recovery rise time tb - 10 - ns IRM(REC) - -1.9 - A Body diode peak reverse recovery current Notes a. Pulse test; pulse width 300 s, duty cycle 2 % b. Guaranteed by design, not subject to production testing c. Independent of operating temperature Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S17-0969-Rev. A, 26-Jun-17 Document Number: 75582 2 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJB68EP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise noted) Axis Title Axis Title 20 15 10000 10000 VGS = 10 V thru 5 V VGS = 4 V 8 100 4 1000 9 1st line 2nd line 1000 12 2nd line ID - Drain Current (A) 12 1st line 2nd line 2nd line ID - Drain Current (A) 16 6 TC = 25 C 3 100 TC = 125 C VGS = 3 V TC = -55 C 0 0 10 0 2 4 6 8 10 10 0 2 4 VGS - Gate-to-Source Voltage (V) 2nd line Output Characteristics Transfer Characteristics Axis Title 10 Axis Title 0.30 10000 10000 TC = 125 C 6 100 3 0 2 4 6 8 1000 0.18 VGS = 4.5 V 0.12 100 VGS = 10 V 0.06 0.00 10 0 0.24 10 10 0 2 4 8 ID - Drain Current (A) 2nd line Transconductance On-Resistance vs. Drain Current Axis Title Axis Title 160 100 Coss 80 Crss 0 10 40 60 80 100 10000 ID = 3 A VDS = 50 V 8 1000 6 1st line 2nd line 1st line 2nd line 1000 Ciss 2nd line VGS - Gate-to-Source Voltage (V) 320 240 4 100 2 0 10 0 1 2 3 4 VDS - Drain-to-Source Voltage (V) 2nd line Qg - Total Gate Charge (nC) 2nd line Capacitance Gate Charge S17-0969-Rev. A, 26-Jun-17 10 10 10000 20 6 ID - Drain Current (A) 2nd line 400 0 1st line 2nd line 1000 9 2nd line RDS(on) - On-Resistance () TC = -55 C TC = 25 C 12 1st line 2nd line 2nd line gfs - Transconductance (S) 8 VDS - Drain-to-Source Voltage (V) 2nd line 15 2nd line C - Capacitance (pF) 6 5 Document Number: 75582 3 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJB68EP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise noted) Axis Title Axis Title 100 10000 VGS = 10 V 2nd line IS - Source Current (A) 10 1000 1.7 VGS = 4.5 V 1.3 100 0.9 0.5 0 25 50 TJ = 150 C 1000 1 0.1 TJ = 25 C 0.01 75 100 125 150 175 10 0 0.2 0.4 0.6 0.8 1.0 1.2 TJ - Junction Temperature (C) 2nd line VSD - Source-to-Drain Voltage (V) 2nd line On-Resistance vs. Junction Temperature Source Drain Diode Forward Voltage Axis Title Axis Title 0.5 0.5 10000 10000 0.2 1000 0.3 TJ = 150 C 0.2 100 0.1 1000 -0.1 1st line 2nd line 2nd line VGS(th) Variance (V) 0.4 1st line 2nd line 2nd line RDS(on) - On-Resistance () 100 0.001 10 -50 -25 10000 1st line 2nd line ID = 4 A 2.1 1st line 2nd line 2nd line RDS(on) - On-Resistance (Normalized) 2.5 ID = 5 mA -0.4 100 ID = 250 A -0.7 TJ = 25 C 0.0 -1.0 10 0 2 4 6 8 10 -50 -25 10 0 25 50 75 100 125 150 175 VGS - Gate-to-Source Voltage (V) 2nd line TJ - Temperature (C) 2nd line On-Resistance vs. Gate-to-Source Voltage Threshold Voltage Axis Title 10000 ID = 1 mA 121 1000 117 1st line 2nd line 2nd line VDS - Drain-to-Source Voltage (V) 125 113 100 109 105 10 -50 -25 0 25 50 75 100 125 150 175 TJ - Junction Temperature (C) 2nd line Drain Source Breakdown vs. Junction Temperature S17-0969-Rev. A, 26-Jun-17 Document Number: 75582 4 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJB68EP www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 C, unless otherwise noted) Axis Title 10000 IDM limited 10 100 s 1000 1 1st line 2nd line 2nd line ID - Drain Current (A) 100 1 ms 10 ms 100 ms, 1 s,100 10 s, DC Limited by RDS(on) (1) 0.1 TC = 25 C Single pulse 0.01 0.01 (1) 0.1 BVDSS limited 1 10 100 10 1000 VDS - Drain-to-Source Voltage (V) VGS > minimum VGS at which RDS(on) is specified Safe Operating Area 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 Notes: 0.1 PDM 0.1 0.05 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = R thJA = 85 C/W 0.02 3. T JM - TA = PDMZthJA(t) Single Pulse 4. Surface Mounted 0.01 10 - 4 10 - 3 10 - 2 10 - 1 1 Square Wave Pulse Duration (s) 10 100 600 Normalized Thermal Transient Impedance, Junction-to-Ambient S17-0969-Rev. A, 26-Jun-17 Document Number: 75582 5 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJB68EP www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 C, unless otherwise noted) Axis Title 1 Duty Cycle = 0.5 1000 0.2 1st line 2nd line Normalized Effective Transient Thermal Impedance 10000 0.1 0.1 100 0.05 0.02 Single pulse 0.01 0.0001 10 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) 2nd line Normalized Thermal Transient Impedance, Junction-to-Case Note * The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 C) - Normalized Transient Thermal Impedance Junction-to-Case (25 C) are given for general guidelines only to enable the user to get a "ball park" indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?75582. S17-0969-Rev. A, 26-Jun-17 Document Number: 75582 6 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix PowerPAK(R) SO-8L Case Outline 2 Revision: 05-Aug-2019 Document Number: 66934 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com DIM. Vishay Siliconix MILLIMETERS INCHES MIN. NOM. MAX. MIN. NOM. MAX. A 1.00 1.07 1.14 0.039 0.042 0.045 A1 0.00 - 0.127 0.00 - 0.005 b 0.33 0.41 0.48 0.013 0.016 0.019 b1 0.44 0.51 0.58 0.017 0.020 0.023 b2 4.80 4.90 5.00 0.189 0.193 0.197 b3 0.094 0.004 b4 0.47 0.019 c 0.20 0.25 0.30 0.008 0.010 0.012 D 5.00 5.13 5.25 0.197 0.202 0.207 D1 4.80 4.90 5.00 0.189 0.193 0.197 D2 3.86 3.96 4.06 0.152 0.156 0.160 D3 1.63 1.73 1.83 0.064 0.068 0.072 e 1.27 BSC 0.050 BSC E 6.05 6.15 6.25 0.238 0.242 0.246 E1 4.27 4.37 4.47 0.168 0.172 0.176 E2 2.75 2.85 2.95 0.108 0.112 0.116 F - - 0.15 - - 0.006 L 0.62 0.72 0.82 0.024 0.028 0.032 L1 0.92 1.07 1.22 0.036 0.042 0.048 K 0.51 0.020 W 0.23 0.009 W1 0.41 0.016 W2 2.82 0.111 W3 q 2.96 0 - 0.117 10 0 - 10 ECN: S19-0643-Rev. B, 05-Aug-2019 DWG: 6044 Note * Millimeters will gover Revision: 05-Aug-2019 Document Number: 66934 2 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAD Pattern www.vishay.com Vishay Siliconix RECOMMENDED MINIMUM PAD FOR PowerPAK(R) SO-8L DUAL 6.7500 (0.266) 5.1300 (0.202) 0.4100 (0.016) 0, 0 1.7300 (0.068) 0.5000 (0.020) 1.9800 (0.078) 0.9150 (0.036) 0.5850 (0.023) 0.7200 (0.028) 2.1100 (0.083) 3.0750 (0.121) 7.7500 (0.305) 0.5100 (0.020) 0.2550 (0.010) 6.1500 (0.242) 3.9900 (0.157) 2.5650 (0.101) 0.4700 (0.019) 1.2700 (0.050) 0.4100 (0.016) Recommended Minimum Pads Dimensions in mm (inches) Keep-out 6.75 (0.266) x 7.75 (0.305) Revision: 07-Feb-12 1 Document Number: 63817 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000